I just do not understand the implementation of Auto Brightness in G2.
If I go out, it never increases the brighness even by one bit. I have to swipe it up.
Same when I go inside.
Whats the point of Having auto brightness if it does not work.
Try lux dash app my friend.
Much better
I typically will point the front camera towards the sun when I go outside to get it to adjust. Usually works pretty quickly, but sometimes it fails.
Sent from my LG-D800 using xda app-developers app
The solution is use lux autobrightness
+1 for Lux autobrightness
eggman89 said:
I just do not understand the implementation of Auto Brightness in G2.
If I go out, it never increases the brighness even by one bit. I have to swipe it up.
Same when I go inside.
Whats the point of Having auto brightness if it does not work.
Click to expand...
Click to collapse
The way the auto brightness works in LG is different from what we see on other devices. If you flashing a custom AOSP based rom you will see auto brightness working fine as we are accustomed.
Agree, stock doesn't work at all
Sent from my LG-LS980 using xda app-developers app
Thanks for the lux tip. It appears to be working well.
Sent from my VS980 4G using Tapatalk
It works actually..Just that it's somehow retarded..And so i have switch over to fixed brightness instead..
Another option, although not automatic, is to swipe down and use the brightness toggle. Each time you press the button it will scroll through from 50%, 90%, 0%, 50%, 90%, 0%, etc.
I usually use my phone at 50% but if I'm in direct sunlight or want to show off my G2 screen I will then hit the brightness button to make it 90%. No idea why it doesn't automatically default to 100%, though.
Sent from my VS980 4G using xda app-developers app
I can not say I have noticed autobrightness glitches (European D802, stock rom).
I think LG2's autobrightness system is great. You can use the slider in pulldown menu to adjust your base brightness preference and it is auto according to that.
Far better than other phones with "fixed auto", i.e. my previous OneX+, where the screen is too bright in low-light conditions.
Yes LUX works...but so does the stock auto brightness setting. So if you want to use the stock version here is what you need to remember. The slider is the BASE level...which means that if you set it to 50% then that is the LOWEST the screen brightness will go when in a dark room. You can set it lower but in my testing I feel that anything lower than 40% does not lower it any more than that... YMMV.
Then, after setting your low end base, the screen will automatically get brighter when you go out into the sun. Now whether it will ever go to 100% on its own or not I do not know. But I find that with my VZ variant set to 50% base, when I go out into the brightest sun the screen brightens up to the point where I can see it just fine. One other observation is that the stock version is a little slower at making the adjustment than LUX is, but only by a few seconds from start to finish.
jaseman said:
Yes LUX works...but so does the stock auto brightness setting. So if you want to use the stock version here is what you need to remember. The slider is the BASE level...which means that if you set it to 50% then that is the LOWEST the screen brightness will go when in a dark room. You can set it lower but in my testing I feel that anything lower than 40% does not lower it any more than that... YMMV.
Then, after setting your low end base, the screen will automatically get brighter when you go out into the sun. Now whether it will ever go to 100% on its own or not I do not know. But I find that with my VZ variant set to 50% base, when I go out into the brightest sun the screen brightens up to the point where I can see it just fine. One other observation is that the stock version is a little slower at making the adjustment than LUX is, but only by a few seconds from start to finish.
Click to expand...
Click to collapse
That might be, but the difference from full sunlight to complete darkness is almost nothing, no matter what base % you set it to. The auto brightness is just utterly completly useless. Giving Lux a try.
I found yet another brightness app works great.
Sent from my LG-D802 using Tapatalk
I leave mine on 40% with auto ticked and it works fine
Sent from my LG-D802 using Tapatalk
I personally leave mine at 50% constant but for those who want auto brightness try this app:
https://play.google.com/store/apps/details?id=com.vito.lux&hl=en
Review:
http://androidcommunity.com/lg-g2-s...onky-give-lux-auto-brightness-a-try-20130923/
Stock autobrightness works, but it's slow and sometimes it won't change screen brightness for reasons unknown.
Lux is much better. I'm not sure about free version, but with full version you can customize brightness curve and lower reaction times so it's really quick compared to stock autobrightness.
+1 for lux with autobrightness on wake
Sent from my VS980 4G using Tapatalk
Yeah, i agree:
The solution here is Lux app. It's AWESOME.
https://play.google.com/store/apps/details?id=com.vito.lux&hl=en
Related
I just installed Android 2.1 and rooted it. In the brightness setting there is no longer a selection to choose the Auto-brightness setting, just a slider for low and high brightness.
Also I noticed the Power Widget that has the brightness control switch lets you switch between low, auto, and high, but while in Auto (the dimmer setting while the button is ON), the sensitivity is very poor and will only brighten the display by about 10% while moving from a very dark environment to a very bright environment.
Yup, i agree. This sucks. Although i had forgoten how nice everything looks with the brightness turned up. All the same id like to have it back.
Sent from my X10i using XDA App
cant expect everything in 2.1 to be perfect. Yes it has taken them a while but i wouldnt expect it to be without any flaws!
At least we got it finally. WOOOOOOOOOOOOOOOT
azian_advanced said:
I just installed Android 2.1 and rooted it. In the brightness setting there is no longer a selection to choose the Auto-brightness setting, just a slider for low and high brightness.
Also I noticed the Power Widget that has the brightness control switch lets you switch between low, auto, and high, but while in Auto (the dimmer setting while the button is ON), the sensitivity is very poor and will only brighten the display by about 10% while moving from a very dark environment to a very bright environment.
Click to expand...
Click to collapse
I thought this today too but the Auto Brighten IS there and still working, just a bit differently.
Initially you choose the 3 levels of brightness on the quick select from the 5 widget icons. This is the brightest it will go, but if you go from a dark or light room it DOES indeed still adjust.
I noticed this after a bit today just standing in the kitchen watching the movers do their thing at my old place. The sun was ducking in and out of the clouds and the auto function was working fine. I tried it in all 3 modes, the only one it doesn't do anything in is the least bright mode...the one I noticed it most is the middle bright mode.
So YES, it is indeed working, just differently.
The auto Brightness sucked in 1.6 anyway. It was never that good for me. I use a brightness widget to adjust it.
I much prefer the way it works now. Seems to be a lot more user friendly tbh
have you tried the setting in spare parts (from the market)?
I've not tried it myself, but I know the auto setting is there.
Auto birghtness
Hmm. I have the 2.1 update and I have set the brightness to the low setting in the power widget. The brightness still adjusts automatically, and I don't want it to. I want it to stay at a low level all the time to save my battery. How?!
Hey,
Do you use Auto brightness or no?
If not, why?
I use auto as it doesn't affect my battery much needed screen look nicer when it's brighter. But there r pple tat use lowest brightness settings for battery savings reason
Sent from my GT-I9100 using Tapatalk
Yes, yes I do.
Sent from my GT-I9100 using XDA App
I don't. It drain's my battery more than manual settings. Slide your finger over notification area to adjust brightness manually.
I'm on MIUI so I can change from the notification bar. It depends, if I'm charging I'll have full brightness to show off the sexy SAmoled+ display. But if I'm out and trying to conserve battery I'll have it on auto.
Sent from my GT-I9100 using XDA App
Off.
Use quick settings via notification, hate brightness changing all time so its all way down except when need to up brightness manually.
Sent from my GT-I9100 using Tapatalk
Off. Main reason is to conserve battery. Most of the time super amoled plus display is bright enough even when close to lowest brightness. Like the others said there's a shortcut to manually increase the brightness through sliding the notification bar when needed say for example outdoors.
i never use the auto feature
Always auto.
I just can't unblock my handset when I'm out (thanks to australian sun) - I see nothing on the screen.
Unless there's a way to manually update brightness when lock screen's on ?
Off and almost always at maximum brightness. When using it in the dark (when I should be sleeping) I lower the brightness via the notification bar shortcut (that also works when the screen is locked using WidgetLocker).
No. Manual adjust is easy and more satisfying.
no!not working good....
inviato da sgs2
I do. Tried both and found that it's just as annoying having to adjust manually as it is when auto is slow
Sent from my GT-I9100 using xda premium
Never..... it ( almost) allways in max. It's a shame to use that beautiful screen on dull settings.
Sent from my Transformer TF101 using xda premium
Im using auto.....because home is not like outdoor.....if i make it at the lowest i wont see any thing in the outdoor.......i have it on because it stimulate the sun and the low light condition.....plus .. i dont care about the battery...i bought the phone to use it and enjoy it not to sit and watch the battery all day long and keeping myself from enjoying this coool phone...........
I use Auto; I might try manual and adjusting it now and then but at the moment I'm content with auto.
I kept it off cause you can easily changed the brightness just by sliding the notification bar
No , I use manual so I can adjust it to the way I like it.
Always off, adjust the brightness level where you suit.
Auto mode may drains battery life.
I do use auto bright
It's good to enhance your view on the mobile at any light conditions
And IT DOES NOT drain your battery . it's,false thoughts guys belive me
Sent from my GT-I9100 using XDA App
hi all, I noticed that light sensor doesnt work properly, when I go from dark to light area, the brightness increases but when I go from light to dark area the brightness wont decrease, on honeycomb it worked properly, anybody else experiences this problem?
Same here, it goes bright but does not decrease.
I use the app https://play.google.com/store/apps/details?id=rubberbigpepper.DisplayBrightness&feature=search_result#?t=W251bGwsMSwxLDEsInJ1YmJlcmJpZ3BlcHBlci5EaXNwbGF5QnJpZ2h0bmVzcyJd
make an invisible slider on the edge of screen to adjust brightness.
is there any way to make it work properly?
Don't think so. Its pretty much unusable now.
Sent from my HUAWEI MediaPad using Tapatalk 2
There are lots of negative comments about light sensor, but i have to say it works well to me on ICS. Could be possibly massive amount of defected devices.
Lightsensor doesn't work for me either - too bad, hope it will be corrected.
Perhaps it's because I'm running ICS "General Channel".
HUAWEI MediaPad FIRMWARE(S7-301u,android4.0,C232B002,General Channel)
Do the sensor dim the light in the same session for you?
Here it turns up the light but not down again.
Sent from my U8800 using Tapatalk 2
Same here, adjusting upwards works fine, but it doesn't adjust downwards in low light conditions.
I have tried two apps that turns the light down again, custom auto brightness and lux auto brightness.
One small problem. The pad will crash on pattern unlock after sleep. I Also the light sensor will not work s after wake up sometimes.
Sent from my HUAWEI MediaPad using Tapatalk 2
mangoman said:
I have tried two apps that turns the light down again, custom auto brightness and lux auto brightness.
One small problem. The pad will crash on pattern unlock after sleep. I Also the light sensor will not work s after wake up sometimes.
Sent from my HUAWEI MediaPad using Tapatalk 2
Click to expand...
Click to collapse
I'm guessing no one has had any luck with this issue but I figure I'd necro the thread anyways. My light sensor sucks also. I used 'Android Sensor Box' to get the values coming out of the sensor. It only displays either 40 lux or 280 lux which is obviously not right. This is on Cyanogen 9, stock t-mobile ICS and the rooted international gingerbread(can't remember which one exactly).
So I was wondering if anyone who owns one of these has ever gotten a sensor value that makes any sense.
thanks
nope,
I use instead display brightness https://play.google.com/store/apps/details?id=rubberbigpepper.DisplayBrightness&hl=no
create an invisible brightness slider on theedge of the screen.
Try using custom auto brightness with the auto brightness on (there's a setting in that app that disabled the system auto brightness at screen on. Turn it off).
The original kernel only recognized 3 light levels. If you use bart's kernel it will recognize 6 levels.
Yes, I think there's a software problem because both app (lux and cua) crash hard in HMP, but I don't think fixing it is a priority.
Sent from my HTC Glacier using Tapatalk 2
How to use custom auto brightness without crashing the tablet.
There are 2 options that should be followed, other settings can be adjusted to your liking.
1. In preferences, Check Use pulsed sensor mode. Basically this option will make the app read the sensor itself instead of listening the sensor value given from the system.
2. In advanced preferences, set the sensor update speed to either half sec or 1 sec. I tried normal, but the app won't read the sensor value, so probably the slow normal maximum setting only works if you get the sensor value from the system.
You can set disable system auto brightness. I recommend it before because the setting was a "hack" which was making the system read the brightness value thus the app can get that value. Right now it's recommended that you check the disable system auto brightness.
Auto brightness... What happened? It used to just work. You know, automatically. If you adjusted the slider it would snap out of Auto mode and lock to what ever you set it at. Going back to full auto was a s simple as selecting the checkbox again in the quick settings.
I don't know if it's part of Marshmallow or TouchWiz but now the brightness slider controls the automatic-ness of the brightness. So its more like a auto "range selector" or "sensitivity selector" it seems. Its more of a semi-automatic mode.
If you set it to ~50% the brightness will adjust +/- 10% around that setting. But it doesn't seem to just automatically do 0-100% on its own anymore.
Set it near 100% and it'll practically refuse to dim in low indoor lighting.
It also seems to respond to whether or not you're holding the phone. It'll get brighter no matter what (thankfully), but it will not lower the screen brightness until you put it down on a horizontal surface... Kind of annoying if you're reading and happen to walk in to a dim room and you're being blinded by your phone until you put it down and then pick it back up. I have Smart Stay turned off so that's not it.
I definitely prefer the plain old, dumb, just works, auto-brightness that I could snap on and off if I needed. Now its...complicated. Why "fix" what isn't broken. Was it confusing some people?
I tried Lux Brightness control app but I'm not sure it's really what I'm looking for. It's too much. I just want "set it and forget it" Automatic (0-100%) brightness like it used to be.
It's a feature. The brightness slider will now bias the automatic setting toward higher or lower brightness while still maintaining the automatic adjustment functionality. Turn off the automatic setting check-box to accomplish full manual control.
What ever happened to just plain Automatic? I don't want to have to mess with a slider. It adjusted the brightness fine before. I find that now it's either too bright or too dim for many situations and I'm constantly messing with the slider. Whereas before, auto was just auto.
Same problem here... It is very annoying
Sent from my SM-G925F using XDA-Developers mobile app
Interestingly, with my old s3 and now my current s6, when looking at battery usage, the screen was always about 15% and usually the second item in the list of things that use the most battery power. It was what I always loved about amoled. Now, screen is number one and comes in at ~50% after the marshmallow update. I wonder if it's because it's always so bright now? Or perhaps they've changed how battery usage is measured. Not much I can do about it. Just an a interesting observation.
So when you're outdoors, even if it's overcast there's no way to slide the brightness down (It auto-snaps to full brightness) even though it's not needed.
I have situations where i could easily use half brightness but my phone forces auto max light
YES, I know i can disable auto brightness completely, but that would not be convenient.
Any fix for this?
I use an app called Lux. Tons of options with it.
todd3835 said:
I use an app called Lux. Tons of options with it.
Click to expand...
Click to collapse
It doesn't actually lower the brightness some sort of overlay , no?
lowspeed said:
It doesn't actually lower the brightness some sort of overlay , no?
Click to expand...
Click to collapse
Hmmmm, Im not sure how it works but it does have an auto mode which you can tweak on the fly.
I have noticed that also. It also jacks up the contrast to make it easier to see.
It makes pics you took look terrible when viewing them outside. I had to learn to NOT delete them until I check them indoors. I assumed some pics I took were crap at first, but it was just the jacked screen contrast that made them look bad.
On my S9+ in bright sunlight it happens that not only something happens to the contrast and colors (eg. reds become somewhat pinkish) but also black elements on screen start flickering/smudging while scrolling. It looks like the device turns into some sort of brightness boost mode.
Does anyone else experience anything like that?
bandit_knight said:
On my S9+ in bright sunlight it happens that not only something happens to the contrast and colors (eg. reds become somewhat pinkish) but also black elements on screen start flickering/smudging while scrolling. It looks like the device turns into some sort of brightness boost mode.
Does anyone else experience anything like that?
Click to expand...
Click to collapse
That's exactly what happens to me. Also if you slide the screen you can see how it the colors are totally distorted.
lowspeed said:
So when you're outdoors, even if it's overcast there's no way to slide the brightness down (It auto-snaps to full brightness) even though it's not needed.
I have situations where i could easily use half brightness but my phone forces auto max light
YES, I know i can disable auto brightness completely, but that would not be convenient.
Any fix for this?
Click to expand...
Click to collapse
Check out the screenshot. There's an option to enable brightness slider in the notification bar. Becomes easier to adjust brightness just by sliding down the notification bar.
sourabh.note said:
Check out the screenshot. There's an option to enable brightness slider in the notification bar. Becomes easier to adjust brightness just by sliding down the notification bar.
Click to expand...
Click to collapse
Did you read what the problem is? outdoors it snaps to max no matter what. (Unless not in auto mode)
Any solution for this problem?
Turn off auto brightness when outdoors..
Guys I've noticed that even if you turn off auto brightness go out in the sun and turn the screen up to max manually,it will kick up into super brightness mode or shine a led light at the sensor when indoors simulating the sun,just like it does with auto brightness on.sammy really want us to get burn in I think so we have to buy new screens all the time?
haircut123 said:
Guys I've noticed that even if you turn off auto brightness go out in the sun and turn the screen up to max manually,it will kick up into super brighmess mode or shine a led light at the sending when indoors simulating the sun,just like it does with auto brightness on.sammy really want us to get burn in I think so we have to buy new screens all the time
Click to expand...
Click to collapse
Never had a screen burn in on a Samsung phone. Don't worry
Guys, idk if this is a S10 only feature (or Android Pie), but when I'm on that situation, if I lower the brightness slider and leave it there for a second or two, the brightness will actually stay down and not jump back up again. Worth a try.
lowspeed said:
So when you're outdoors, even if it's overcast there's no way to slide the brightness down (It auto-snaps to full brightness) even though it's not needed.
I have situations where i could easily use half brightness but my phone forces auto max light
YES, I know i can disable auto brightness completely, but that would not be convenient.
Any fix for this?
Click to expand...
Click to collapse
After the S9+'s update to Pie some of the old settings get copied to the new OS, but if you don't go into the settings and check, things might not be configured correctly - I had to choose a different setting and then choose again what was previously selected to ensure that it was written into the Settings correctly.
With the new update the "Automatic Brightness" applies to the AOD - see here in this screenshot, my search of the Settings for the word "auto brightness", see what comes up in attachment #1.
What you need to do is go to the "Adaptive Brightness" and turn it on, then manually adjust your brightness under a few different conditions (EG: Indoors lights off, outside and overcast, and bright sunny day). Now your phone will understand what setting you want for different conditions and automatically adjust the brightness based on lighting conditions, see attachment #2.
The "auto brightness" is now used for the AOD, and has nothing to do with brightness when unlocked. The reason it "auto snaps to full brightness" is likely because previous settings were just copied over after the update and you haven't setup (and trained) the new "Adaptive Brightness" for various light levels. The AOD has both "Auto Brightness" and double-tap the clock to adjust AOD brightness.