12V DC charger - AT&T Samsung Galaxy Note I717

Looking for a 12V DC charger at a local store..
Choices aren't great...
Walmart, Staples, Radio Shack, Target....
I bought one at Walmart for all Samsung devices, but it didn't work..
What should I be looking for...
I tried asking one of the Techs at Staples.. Dumb idiot was useless...
Thanks

I bought this pack about 2 years ago. Always give me a full amp charging. You'll need a good usb cable though.
Edit: can't post links, search Walmart Rayovac usb charger.
12vdc charger and a separate household comes in about $12
Sent from my SAMSUNG-SGH-I717 using XDA Free mobile app

Appreciate the info...
What is a good usb cable considered...
i bought a 12v Duarcell USB 2.1 Amp today.
It charges my Galaxy S3. but doesn't charge the i717..
I'm starting to wonder if I need a better cable like you are recommending.
death_legend said:
I bought this pack about 2 years ago. Always give me a full amp charging. You'll need a good usb cable though.
Edit: can't post links, search Walmart Rayovac usb charger.
12vdc charger and a separate household comes in about $12
Sent from my SAMSUNG-SGH-I717 using XDA Free mobile app
Click to expand...
Click to collapse

I have a couple cables that work with the AC USB adapter and on my computer..
But they will not work with the 2.1 amp DC usb adapter.
I figured the 2.1 amp would be enough.
What should I be looking for Amp/Watt wise in an adapter...
Thanks

benraines said:
Appreciate the info...
What is a good usb cable considered...
i bought a 12v Duarcell USB 2.1 Amp today.
It charges my Galaxy S3. but doesn't charge the i717..
I'm starting to wonder if I need a better cable like you are recommending.
Click to expand...
Click to collapse
delayed response. the good cable i mentioned would be any charging specific cable where the data pins are shorted to force most phones into ac charging, or any cable with a decent gauge wire in it. i ran into a problem with some really cheap cables that were overheating at the pins due to bad solder joints. The phone showed it was charging but the battery would drop unless the screen was off. It took nearly two days to charge with that cable. The cable didnt feel warm at all, but it had too much resistance to carry the current for the phone.

Related

Power supplies

You guys have much luck finding power supplies or cables for a generic USB power adapter for the springboard? I will probably use this device as a GPS quite a bit, and would like to have the car charger.
delio77 said:
You guys have much luck finding power supplies or cables for a generic USB power adapter for the springboard? I will probably use this device as a GPS quite a bit, and would like to have the car charger.
Click to expand...
Click to collapse
Ebay has plenty.
Just search for usb charging cable mediapad and iPad usb car charger. The purpose for iPad charger is to make sure that the charger has big enough amp/watt.
Sent from my HTC Glacier using Tapatalk 2
rurou said:
Just search for usb charging cable mediapad and iPad usb car charger. The purpose for iPad charger is to make sure that the charger has big enough amp/watt.
Click to expand...
Click to collapse
Yep, you need at least a 2 Ampere charger.
I used a bog standard 0.5A charger first in the car and the tablet ran out of juice after a few hours. Then I found a 3 Ampere car charger at a fuel station shop and now it runs fine.
I bought a USB-to-Mediapad power connector cable from some german online store to connect the car charger to the tablet. As we all now charging via the micro-usb port does not work.
stefvienna said:
Yep, you need at least a 2 Ampere charger.
I used a standard 0.5A charger first in the car and the tablet ran out of juice after a few hours. Then I found a 3 Ampere car charger at a fuel station shop and now it runs fine.
I bought a USB-to-Mediapad power connector cable from some german online store to connect the car charger to the tablet. As we all now charging via the micro-usb port does not work.
Click to expand...
Click to collapse
Could you please provide a link to the site with usb-to-springboard adapter? I can't seem to find one anywhere
The microUSB port does charge but it is a slow trickle. I can get it from empty to 100% if I plug it into a microUSB charger overnight, but if I need to boost it as fast as possible it has to use the charge port.
ridingonfumes said:
Could you please provide a link to the site with usb-to-springboard adapter? I can't seem to find one anywhere
Click to expand...
Click to collapse
Here you go.. this is the one I got.. pretty pleased with it.. One tip, only use a 1amp charger, with 1,5 or 2 amps the mediapad starts to overheat or something, it overall fails to function properly
http://www.ebay.nl/itm/TABLET-PC-LA...ingstationen&hash=item564af7f0ee#ht_855wt_907
Hello guys,
Could you give fast answer what parameters has original huawei s7-301u charger? I lost my charger and i need buy another ASAP.
Best,
Lolu said:
Hello guys,
Could you give fast answer what parameters has original huawei s7-301u charger? I lost my charger and i need buy another ASAP.
Best,
Click to expand...
Click to collapse
5 volts, 2 Amp. It needs that much power, a smaller ps might burn the house down.
Big thanks to you man!!!

PowerGen Dual USB 2A Heavy Duty Ouput Car Charger

From the "Ultimate AT&T Galaxy Note Accessory Guide" thread:
fbauto1 said:
13. Car Charger + Power Inverters
$10 -- PowerGen Dual USB 2A Heavy Duty Ouput Car Charger for Apple iPad 2, iPhone 4 4s 3Gs 3G, iPod Touch (USB Cable not included) --- Review
Click to expand...
Click to collapse
Has anyone else used the PowerGen car charger with the Note? I have a handful of other ones that all claim to fast-charge devices, but apparently it only works with iPhones and iPads. But since the PowerGen unit is on the list, can I assume people have used it and confirmed it will give me a 1A charge rate on the Note? I need a charger that can keep up with the Note occasionally drawing 1.4 A or more (display 100% brightness, GPS, LTE, Bluetooth all active, running Navigation).
A quick search for "powergen" in this forum only brings up the above thread.
Works like a champ. My battery was charging at 1600mAh while streaming soundcloud and using navigation. Definitely does the job.
I am using my car charger for galaxy tab 10.1 (2.0 amp) and it is working much better than any of the 1 amp chargers I have tried, OEM, boxwave, etc...
I also use the GT 101. 110V charging brick, so when I travel, only one brick and two cables. My experience is that the 2 amp charger works really well and will charge the phone while using GPS full time, where the OEM charger and other 1 amp chargers either maintain charge, or slightly discharge.
Thanks for the confirmation! Of course, now I discover Amazon won't ship that to Canada, and amazon.ca does not carry it. :crying: I'd go see what TELUS has to offer, but I'm sure it will be A) expensive and B) not have dual USB ports, or perhaps not even a detachable cord.
If you do find one, also buy a charge-only usb cord.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
tdamocles said:
If you do find one, also buy a charge-only usb cord.
Click to expand...
Click to collapse
Is that still needed if the charger itself correctly supports fast charging? The cord I use now is the one from my Touchpad. I get 1 A to the Note from the AC plug, and the Touchpad gets around 1.8 A. I do also have a charge-only cable (much thinner cord, only two wires), but it doesn't seem to make a difference.
taob said:
Is that still needed if the charger itself correctly supports fast charging? The cord I use now is the one from my Touchpad. I get 1 A to the Note from the AC plug, and the Touchpad gets around 1.8 A. I do also have a charge-only cable (much thinner cord, only two wires), but it doesn't seem to make a difference.
Click to expand...
Click to collapse
The cord from the touchpad is probably wired correctly internally for fast charge. I bought a similar dual car charger and did not see a difference with the micro usb sync cable. I only saw a difference with a charge-only micro usb cable. The phone sees what pins are connected and determines if it is going to charge in usb charge mode(<=500ma) or AC charge mode(>=500ma).
tdamocles said:
The cord from the touchpad is probably wired correctly internally for fast charge. I bought a similar dual car charger and did not see a difference with the micro usb sync cable. I only saw a difference with a charge-only micro usb cable. The phone sees what pins are connected and determines if it is going to charge in usb charge mode(<=500ma) or AC charge mode(>=500ma).
Click to expand...
Click to collapse
So you use the Touchpad USB micro cable to charge your Note in the car? I thought the cable is too short? I am looking for a LONG USB micro cable that is shorted so it will give >500mA.
I am planning to buy the PowerGen but I need recommendation on the CORRECT USB cable that is long enough.
---------- Post added at 09:26 AM ---------- Previous post was at 09:24 AM ----------
slapshot591 said:
Works like a champ. My battery was charging at 1600mAh while streaming soundcloud and using navigation. Definitely does the job.
Click to expand...
Click to collapse
What cable do you use?
tdamocles said:
The cord from the touchpad is probably wired correctly internally for fast charge.
Click to expand...
Click to collapse
I don't think it is, because it also works as a normal USB data cable. If pins 2 and 3 are shorted (D+ and D-), then the cable become "charge only" and cannot be used for data.
I bought a similar dual car charger and did not see a difference with the micro usb sync cable. I only saw a difference with a charge-only micro usb cable.
Click to expand...
Click to collapse
Then it sounds like that car charger was an "iPad-compatible" one, i.e.: it does not have D+/D- shorted out to indicate to non-Apple devices that it is capable of more than 500 mA.
lanwarrior said:
So you use the Touchpad USB micro cable to charge your Note in the car? I thought the cable is too short?
Click to expand...
Click to collapse
The cable is about a meter in length. I only need about half that to reach from the plug to the phone mount on the dash.
taob said:
I don't think it is, because it also works as a normal USB data cable. If pins 2 and 3 are shorted (D+ and D-), then the cable become "charge only" and cannot be used for data.
Then it sounds like that car charger was an "iPad-compatible" one, i.e.: it does not have D+/D- shorted out to indicate to non-Apple devices that it is capable of more than 500 mA.
Click to expand...
Click to collapse
So then how does it charge fast then? If the cable isn't shorted? Motorola does the same thing. IIRC its a shorted setup to allow for fast charging. All of my USB cables come from Samsung, HP, and Motorola and I use them as data cables as well
Sent from my SAMSUNG-SGH-I717 using XDA
erick161 said:
So then how does it charge fast then? If the cable isn't shorted?
Click to expand...
Click to collapse
You short the pins inside the AC adapter or car charger, rather than the cable. If I understand correctly, the danger of using a charge-only cable is if you plug it into an actual USB port that isn't designed to supply more than 500 mA. Your device could then try to pull down, say, 2000 mA and potentially damage the power supply on your laptop or desktop.
taob said:
You short the pins inside the AC adapter or car charger, rather than the cable. If I understand correctly, the danger of using a charge-only cable is if you plug it into an actual USB port that isn't designed to supply more than 500 mA. Your device could then try to pull down, say, 2000 mA and potentially damage the power supply on your laptop or desktop.
Click to expand...
Click to collapse
Ahh OK. Well, the cigarette lighter/USB converters must act like shorted out wall chargers.
That's my setup.
Sent from my SAMSUNG-SGH-I717 using XDA
I'm using the Rocketfish 3.1A Model# RF-M657D with my Note. While using Google Nav, lowest brightness, keys backlight off, Sync off, HSPA+, the phone still loses charge (albeit, slowly). I'm assuming this is because the charger is not internally shorted between pins two and three as it is marketed as a iPad/iPhone charger. I'm using a Belkin Data/Charge cable so I know that is not shorted.
I have been doing some reading and last night, I purchased the "Satechi Smart Adapter Compatible with Samsung Galaxy S (I can't post links yet, google it.) so I will report back when I receive and pair it with the Rocketfish.
One thing I can't understand is how some of you have reported 1600mA from your car chargers. I am reading that without this adapter/cable mod, the Note will only run 460mA or so. With the adapter/cable mod, the Note's hardware maxes out at 960mA. Also, is their an app that allows me to see how much amperage the Note is receiving or are you guys pulling out the multimeter?
slapshot591 said:
Works like a champ. My battery was charging at 1600mAh while streaming soundcloud and using navigation. Definitely does the job.
Click to expand...
Click to collapse
Where/how do you get this info? Asking because I'm curious to see how my car charger does. It has usb ports rated at 2A, and I think it's 2A shared instead of per port, but want to see how it actually does when plugged in.
btswein said:
I'm using the Rocketfish 3.1A Model# RF-M657D with my Note. While using Google Nav, lowest brightness, keys backlight off, Sync off, HSPA+, the phone still loses charge (albeit, slowly). I'm assuming this is because the charger is not internally shorted between pins two and three as it is marketed as a iPad/iPhone charger. I'm using a Belkin Data/Charge cable so I know that is not shorted.
I have been doing some reading and last night, I purchased the "Satechi Smart Adapter Compatible with Samsung Galaxy S (I can't post links yet, google it.) so I will report back when I receive and pair it with the Rocketfish.
One thing I can't understand is how some of you have reported 1600mA from your car chargers. I am reading that without this adapter/cable mod, the Note will only run 460mA or so. With the adapter/cable mod, the Note's hardware maxes out at 960mA. Also, is their an app that allows me to see how much amperage the Note is receiving or are you guys pulling out the multimeter?
Click to expand...
Click to collapse
My rocket fish model must put out more than yours. My pic is above your post. With Google Nav, Google play music (streaming, not native music), full sync, brightness to at least 50% it only lost 4% over 30-40mins.
Sent from my SAMSUNG-SGH-I717 using XDA
erick161 said:
My rocket fish model must put out more than yours. My pic is above your post. With Google Nav, Google play music (streaming, not native music), full sync, brightness to at least 50% it only lost 4% over 30-40mins.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
From what I read, your charger is an .5 amp.
It's not like my phone dies or anything, but it'll lose like 5% an hour and I could be exaggerating. Are you using a charge-only cable or modded cable/charger at all? Like I said, I think this phone is only pulling down 460mA without said mod and I find 1600mA to be incorrect as I read the Note will only pull down 960mA max. We'll see what this adapter does for my charge times.
btswein said:
From what I read, your charger is an .5 amp.
It's not like my phone dies or anything, but it'll lose like 5% an hour and I could be exaggerating. Are you using a charge-only cable or modded cable/charger at all? Like I said, I think this phone is only pulling down 460mA without said mod and I find 1600mA to be incorrect as I read the Note will only pull down 960mA max. We'll see what this adapter does for my charge times.
Click to expand...
Click to collapse
They only thing I'm using is that exact setup posted. RF adapter and a Motorola atrix desktop dock charge cable.. (basically just a longer version of the standard wall charger)
Sent from my SAMSUNG-SGH-I717 using XDA
erick161 said:
They only thing I'm using is that exact setup posted. RF adapter and a Motorola atrix desktop dock charge cable.. (basically just a longer version of the standard wall charger)
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
Ah, charge-only cable is the main factor here.
btswein said:
Ah, charge-only cable is the main factor here.
Click to expand...
Click to collapse
OK, I lied, I'm using the OEM cable that came with the Motorola Atrix 4G, not the longer cable from the desktop dock. I just checked my car and that's the cable that's in there.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

Faster Charging 2amp Touchpad Charger for $4.99

I noticed a lot of people want a fast charger for the Note. This charger is for the Touchpad. I have this and it works really well. It charges faster than the OEM charger that came with the Note.
Not to mention, it is on sale right now for less than $5. Go grab one. From past experience, I used this at 15% battery life and charged for an hour and I was back over to 80%.:victory:
http://www.shopping.hp.com/en_US/ho.../FB341AA?HP-TouchPad-Power-Charger&aoid=35252
Is the usb cable that comes with it the same as the note takes?they don't show a pic of the other end and is it a charge only cable?If yes and yes I'm a gonna get one.Thanks
technut said:
Is the usb cable that comes with it the same as the note takes?they don't show a pic of the other end and is it a charge only cable?If yes and yes I'm a gonna get one.Thanks
Click to expand...
Click to collapse
Yes, it is a micro USB cable. One end is USB and other is micro USB. The cable length is longer than most phone cables. I haven't measured it, but from my plug to my desk, I still have excess cable compared to the original one from the phone.
Thank you, getting one!
This have been discussed hundreds time before....
That 1amp is the output of the charger which forwards the current to kernel of the device... NOTE can only intake 1 amp current... ( remove your battery and read the dam sticker :thumbup
Even though you will supply 2 3 4 5 amp... The maximum in would be 1 amp ONLY...
SECONDLY, micro usb cables have a restriction of carrying current... They cannot pass more than 1 amp current successfully... Therefore galaxy tab series does not come with micro usb slots....
Lastly my recommendation would be NOT to waste money on any other chargers...
Noted by the BEAST!!
dx.varun said:
This have been discussed hundreds time before....
That 1amp is the output of the charger which forwards the current to kernel of the device... NOTE can only intake 1 amp current... ( remove your battery and read the dam sticker :thumbup
Even though you will supply 2 3 4 5 amp... The maximum in would be 1 amp ONLY...
SECONDLY, micro usb cables have a restriction of carrying current... They cannot pass more than 1 amp current successfully... Therefore galaxy tab series does not come with micro usb slots....
Lastly my recommendation would be NOT to waste money on any other chargers...
Noted by the BEAST!!
Click to expand...
Click to collapse
It has been discussed, but it DOES charge faster than a conventional 1amp charger. If you don't have the charger and have nothing to compare with, then I don't think you can say it does not work.
Go check FCC about the charge. Also, the cables provided DOES carry a 2amp charge. Our note can handle fast charging but throttles down to a slower charging rate after 80%.
having a micro usb slot or not have a micro usb slot has nothing to do with the current it can handle.
Ipads and Iphones have the same connector but yet one has a 1amp charger and the other a 2amp charger.
deliriousbb said:
It has been discussed, but it DOES charge faster than a conventional 1amp charger. If you don't have the charger and have nothing to compare with, then I don't think you can say it does not work.
Go check FCC about the charge. Also, the cables provided DOES carry a 2amp charge. Our note can handle fast charging but throttles down to a slower charging rate after 80%.
having a micro usb slot or not have a micro usb slot has nothing to do with the current it can handle.
Ipads and Iphones have the same connector but yet one has a 1amp charger and the other a 2amp charger.
Click to expand...
Click to collapse
Firstly, I have tried to use with a 2amp charger that came with my SGT P1000.. NO DIFFERENCE...
SECONDLY, PULL OUT BATTERY AND READ!
Google for micro usb cable max output... You will get your answers...
Noted by the BEAST!!
dx.varun said:
This have been discussed hundreds time before....
That 1amp is the output of the charger which forwards the current to kernel of the device... NOTE can only intake 1 amp current... ( remove your battery and read the dam sticker :thumbup
Even though you will supply 2 3 4 5 amp... The maximum in would be 1 amp ONLY...
SECONDLY, micro usb cables have a restriction of carrying current... They cannot pass more than 1 amp current successfully... Therefore galaxy tab series does not come with micro usb slots....
Lastly my recommendation would be NOT to waste money on any other chargers...
Noted by the BEAST!!
Click to expand...
Click to collapse
deliriousbb said:
It has been discussed, but it DOES charge faster than a conventional 1amp charger. If you don't have the charger and have nothing to compare with, then I don't think you can say it does not work.
Go check FCC about the charge. Also, the cables provided DOES carry a 2amp charge. Our note can handle fast charging but throttles down to a slower charging rate after 80%.
having a micro usb slot or not have a micro usb slot has nothing to do with the current it can handle.
Ipads and Iphones have the same connector but yet one has a 1amp charger and the other a 2amp charger.
Click to expand...
Click to collapse
Well its $5, which is not worth this discussion, I'll gladly give this money even for the stock samsung charger.
i_max2k2 said:
Well its $5, which is not worth this discussion, I'll gladly give this money even for the stock samsung charger.
Click to expand...
Click to collapse
Agreed! A good charger for cheap.
dx.varun said:
Firstly, I have tried to use with a 2amp charger that came with my SGT P1000.. NO DIFFERENCE...
SECONDLY, PULL OUT BATTERY AND READ!
Google for micro usb cable max output... You will get your answers...
Noted by the BEAST!!
Click to expand...
Click to collapse
You don't have to get your panties in a twist. Rather than just read forums and assume the worst of everything try it for yourself. I've tried both and it is faster. Just trying to help my fellow Note users to get the best out of their phones.
btw, what are you screaming about pull out the battery and read? you tell me what you want us to know. RATED: 3.7V; 1500mA... WOW ok that proves your point...sigh:silly:
dx.varun said:
This have been discussed hundreds time before....
That 1amp is the output of the charger which forwards the current to kernel of the device... NOTE can only intake 1 amp current... ( remove your battery and read the dam sticker :thumbup
Even though you will supply 2 3 4 5 amp... The maximum in would be 1 amp ONLY...
SECONDLY, micro usb cables have a restriction of carrying current... They cannot pass more than 1 amp current successfully... Therefore galaxy tab series does not come with micro usb slots....
Lastly my recommendation would be NOT to waste money on any other chargers...
Noted by the BEAST!!
Click to expand...
Click to collapse
As an HP TouchPad owner, I can confirm that the cable provided with the charger are 'special'. My TP will not charge with any other MicroUSB cable connected to the official charger, the same cables which won't charge the TP will charge the Note. (I also own the HP touchstone dock, which the TP spends most of it's life sitting on.)
deliriousbb said:
It has been discussed, but it DOES charge faster than a conventional 1amp charger.
Click to expand...
Click to collapse
I have four different wall chargers, including two of this HP barrel adapter (one that came with the TouchPad, one that came with the Touchstone). With the supplied cable, it does charge the TouchPad very quickly. From webOS, the net charge rate is about 1.6 A with the screen on, so probably close to 2 A coming out the USB port.
However, when you plug a Note into this charger, the Note will still only draw 1 A. I have other AC chargers that are also able to supply 1 A to the Note, so in that respect this HP charger isn't anything special. However, it is only $5, which is a good deal.
---------- Post added at 11:39 PM ---------- Previous post was at 11:14 PM ----------
pTeronaut said:
My TP will not charge with any other MicroUSB cable connected to the official charger, the same cables which won't charge the TP will charge the Note.
Click to expand...
Click to collapse
I've found that the microUSB cable that comes with the Note, when paired with the HP TouchPad's AC charger, will supply 2 A. At least, that's what the OS reports: /sys/devices/platform/usb_gadget/current-mA shows "2000". Plugging the TouchPad into the Note's AC charger shows a value of "900". Plugging it into my laptop's USB port drops that value down to "500", as expected.
I bought two a week ago off Amazon for $10 each. $5 each with free shipping is a steal. I picked up three more. Thanks for posting this deal. I get 1A charging with either the stock charger or TP charger. I like to have a few extra chargers to sprinkle around at home or work (for my Note and the other devices I own that charge off USB.... including a TP).
deliriousbb said:
Yes, it is a micro USB cable. One end is USB and other is micro USB. The cable length is longer than most phone cables. I haven't measured it, but from my plug to my desk, I still have excess cable compared to the original one from the phone.
Click to expand...
Click to collapse
When you charge your phone using this HP microUSB cable, do you have issue with NO DEEP SLEEP when unplugging the Note from the charger?
There has been issues reported in XDA where, depending on the USB cables used to charge the Note (connected to computer OR power charger), if you unplug the Note, it will not go DEEP SLEEP, causing significant power drain.
This does NOT happen when the Note is charged using the cable that came with the Note.
Download Current Widget from the play store. Add widget to home screen and you will realize that your phone is not charging any more than 1 amp as designed.
Try the usb out from your pc and you will see about half an amp.
Sent from my SAMSUNG-SGH-I717 using xda premium
I have the galaxy tab brick charger the HP touch pad charger and my note charging brick....the touchpad charger works faster...but I feel like it doesn't get fully charged..seems to die faster?. I used the galaxy tab brick...slow to charge warms my phone up nicely...I'd stick with the original note charger.
Sent from my SAMSUNG-SGH-I717 using xda premium
lanwarrior said:
When you charge your phone using this HP microUSB cable, do you have issue with NO DEEP SLEEP when unplugging the Note from the charger?
There has been issues reported in XDA where, depending on the USB cables used to charge the Note (connected to computer OR power charger), if you unplug the Note, it will not go DEEP SLEEP, causing significant power drain.
This does NOT happen when the Note is charged using the cable that came with the Note.
Click to expand...
Click to collapse
I charge my Note overnight using my Touchpad's MicroUSB cable plugged into the Samsung charger, and I don't experience any difference in power drain.
Where is that post from the guy who put all these petty arguments to rest with scientific tests of all the various options and results??
Good lord people it's a charger for a phone .. no need to get so heated!
(unlike my stock charger.. which gets very heated!)
great price!!!
ordered 3 of them
the price is way cheaper than just a single micro usb cable shipped from other stores
i have 3 already
1 at work, 2 for home.
definitely faster than OEM. I charge overnight, no issues. had for around 5-6 months now. and i can use the phone while charging.
fact is that it DOES charge faster.
i recommend it
WOW***
Great price I bought 2!

3 meter charging cable

Is there a cable longer then the original that will charge like the original?
The cable is too short, and i cant find a longer one anywhere. I need one that would charge the phone fast like the original.
I use a 3 foot usb cable extension with mine
Sent from my SM-N900P using XDA Premium 4 mobile app
motixlost said:
Is there a cable longer then the original that will charge like the original?
The cable is too short, and i cant find a longer one anywhere. I need one that would charge the phone fast like the original.
Click to expand...
Click to collapse
There is nothing special about the original cable, it is just a data cable/charge cable. It is the charger that is special. The stock charger is internally shorted to charge [email protected]?2 amps not [email protected] Get a good quality 6 foot data/charge cable from monoprice. The monoprice cables have small ends that fit on almost all cases with smaller USB holes. EBay cables are hit or miss.
Sent from my ME302C using Tapatalk 4
tdamocles said:
There is nothing special about the original cable, it is just a data cable/charge cable. It is the charger that is special. The stock charger is internally shorted to charge [email protected]?2 amps not [email protected] Get a good quality 6 foot data/charge cable from monoprice. The monoprice cables have small ends that fit on almost all cases with smaller USB holes. EBay cables are hit or miss.
Sent from my ME302C using Tapatalk 4
Click to expand...
Click to collapse
Grab your stock charger, install Galaxy Charging Current on your phone and test different cables. You'll see that the stock cable charges much faster. This goes for car chargers too. I have a Samsumg OEM 2 A car charger that I tested with different cables. The difference between the stock cable and even good quality cables is notorious. What really isn't that special is the charger. Even a USB charging port from a laptop can provide more than 500 mA. By the way, you are confusing DC and AC currents.if you are referring to the 500 mA of the USB standard, they are DC too.
That being said, I too wish there was a 3 meter cable that could charge as fast as the Samsung original.
Alexei Volkoff said:
Grab your stock charger, install Galaxy Charging Current on your phone and test different cables. You'll see that the stock cable charges much faster. This goes for car chargers too. I have a Samsumg OEM 2 A car charger that I tested with different cables. The difference between the stock cable and even good quality cables is notorious. What really isn't that special is the charger. Even a USB charging port from a laptop can provide more than 500 mA. By the way, you are confusing DC and AC currents.if you are referring to the 500 mA of the USB standard, they are DC too.
That being said, I too wish there was a 3 meter cable that could charge as fast as the Samsung original.
Click to expand...
Click to collapse
I bought my phone brand new from a local Verizon Corporate store and obviously my phone came with the Galaxy Note 3's standard white Samsung 2.1amp charger and white USB 3.0 charging cable. I needed extras and wanted to order something as close to stock performance and charging speeds that I could get without paying out the a$$ for a couple of real OEM wall chargers and cables from Verizon, so I did a little research and found a couple of good combos off Amazon that matched the same charging rates that the OEM charger/cable combo gives me.
I ordered an Amazon Basics 2.1amp output wall charger, this Amazon Basics 9ft long USB 3.0 cable, this small/low profile PNY 12volt/2.1amp "Rapid Charge" Car Charger, and this 8ft long Mediabridge USB 3.0 "SuperSpeed" Cable.
I tested combos of each cable(OEM White Samsung Galaxy Note 3 Cable, Amazon Basics Cable, and the Mediabridge Cable) with EACH charger(OEM White Samsung Galaxy Note 3 Wall Charger, Amazon Basics 2.1amp Wall Charger, and the PNY 2.1amp Car Charger) using the "Galaxy Charging Current" app and got the same results all across the board with each combo, even the Samsung Charger/Samsung Cable combo. So unless that app spits out skewed numbers on a consistent basis, I believe it's safe to say that as long as you get a decent quality charger that can truly pump out 2.1amps like the OEM Samsung Charger and a decent cable to pair up with whatever charger you purchase, there's no need to spend the big bucks and go OEM....unless you're just one of those kinds of people that HAS to have OEM everything just for the extra peace of mind and to make sure all of their accessories are of the same matching Samsung brand. I see no reason to spend that kind of money when a MUCH cheaper alternative will get the job done just the same, PLUS the "craftsmanship" and quality of the aftermarket chargers/cables I mentioned appears to be outstanding, if not maybe even a little better than the OEM Samsung combo...besides the fact that the fancy OEM cable has the glossy, white, square-shaped plugs at the each end of the cable with the "SAMSUNG" name emblazoned on them and those aftermarket cables gave me a hard time squeezing past the charger cutout on my Spigen Slim Armor Case(some shaving of the plug is necessary in order for them to fit through my Slim Armor charging cutout).
If you're not concerned with all that fanciness, save yourself quite a few bucks and opt for the cheaper alternatives...just do yourself a favor and do your research first...you WON'T be disappointed. :good::good::good:
You got lucky. I've tested about half dozen cables by now and none of them managed to deliver the same current as the stock cable. Out of curiosity, what current did you get? 1800 mA?
Yeah, it's mostly testing with the Galaxy Charging app on whether or not you get the max current or not. I got lucky that my wife's Lumia's data cable is at par with the stock cable and use that for Ingress sessions. I also use the HP Touchpad wall charger as a secondary charger, it gives out 2.1 amps, one of the best chargers around.
harveydent said:
Yeah, it's mostly testing with the Galaxy Charging app on whether or not you get the max current or not. I got lucky that my wife's Lumia's data cable is at par with the stock cable and use that for Ingress sessions. I also use the HP Touchpad wall charger as a secondary charger, it gives out 2.1 amps, one of the best chargers around.
Click to expand...
Click to collapse
I have also tested with various combinations of the OEM sammy cable and charger, AmazonBasics 3' and 9' USB3 cables, a nexus 7 wall charger and an Anker 2.4W car charger. All did very well and charged around 1800mA. My laptop charges it at a little under 500mA.
I also had to shave the AmazonBasics end to fit with my Slim Armor case. I don't get why they made it so large in the first place, its HUGE. Also, the AmazonBasics cord is very thick and stiff, more like cable TV cable.
jsdecker10 said:
I bought my phone brand new from a local Verizon Corporate store and obviously my phone came with the Galaxy Note 3's standard white Samsung 2.1amp charger and white USB 3.0 charging cable. I needed extras and wanted to order something as close to stock performance and charging speeds that I could get without paying out the a$$ for a couple of real OEM wall chargers and cables from Verizon, so I did a little research and found a couple of good coimbos off Amazon that matched the same charging rates that the OEM charger/cable combo gives me.
I ordered an Amazon Basics 2.1amp output wall charger, this Amazon Basics 9ft long USB 3.0 cable, this small/low profile PNY 12volt/2.1amp "Rapid Charge" Car Charger, and this 8ft long Mediabridge USB 3.0 "SuperSpeed" Cable.
I tested combos of each cable(OEM White Samsung Galaxy Note 3 Cable, Amazon Basics Cable, and the Mediabridge Cable) with EACH charger(OEM White Samsung Galaxy Note 3 Wall Charger, Amazon Basics 2.1amp Wall Charger, and the PNY 2.1amp Car Charger) using the "Galaxy Charging Current" app and got the same results all across the board with each combo, even the Samsung Charger/Samsung Cable combo. So unless that app spits out skewed numbers on a consistent basis, I believe it's safe to say that as long as you get a decent quality charger that can truly pump out 2.1amps like the OEM Samsung Charger and a decent cable to pair up with whatever charger you purchase, there's no need to spend the big bucks and go OEM....unless you're just one of those kinds of people that HAS to have OEM everything just for the extra peace of mind and to make sure all of their accessories are of the same matching Samsung brand. I see no reason to spend that kind of money when a MUCH cheaper alternative will get the job done just the same, PLUS the "craftsmanship" and quality of the aftermarket chargers/cables I mentioned appears to be outstanding, if not maybe even a little better than the OEM Samsung combo...besides the fact that the fancy OEM cable has the glossy, white, square-shaped plugs at the each end of the cable with the "SAMSUNG" name emblazoned on them and those aftermarket cables gave me a hard time squeezing past the charger cutout on my Spigen Slim Armor Case(some shaving of the plug is necessary in order for them to fit through my Slim Armor charging cutout).
If you're not concerned with all that fanciness, save yourself quite a few bucks and opt for the cheaper alternatives...just do yourself a favor and do your research first...you WON'T be disappointed. :good::good::good:
Click to expand...
Click to collapse
I'm with you. I've been using that cheap sprint 2amp dual use ac/car charger with the monoprice cables and it charges just as fast as the stock samsung combo.
By the way, ~9 feet (3 meters) is a long ways to charge something.
If you ever notice if you buy one of the cheap cigarette lighter chargers it shows USB charging in the battery properties. This limits it to around 500ma. It must be internally wired to charge at the USB standard. Now buy cigarette Lighter 'fast charger' and it will show AC charging in the battery properties. It must be internally wired to charge at a higher amperage.
Sent from my SM-N9005 using Tapatalk
In the bottom line, only the samsung original cable can charge with maximum power?
No, just a good quality cable imho. Monoprice 6 footer or similar. Only one thing that bothers me with monoprice cable is the wire tends to pull out of the terminated end if you pull at it too much. What I love about them is the terminated ends are small.
Sent from my SM-N9005 using Tapatalk

Extended charging cable

Hi
Sorry if this is a repost but I couldn't find answer anywhere.
I am looking to get a 3m cable to charge my Note3, the extension cables I have tried have varied in success, I have 1 that works well and is fast but the wife has claimed it and I can't find where I got it from.
I am happy to use the supplied plug, extension (e meters) and OEM cable or the supplied plug and a complete USB to USB 3.0 micro B cable (3meters). Does anyone know of a tried an tested 3 meter cable that offers a good charging time?
Also, does the USB 3 micro B cable charge faster than a standard USB to micro USB cable? I know the transfer rate is quicker just not sure if the charge/power rate is better?
Any help appreciated.
Jon
Sent from my SM-N9005 using Tapatalk
jonro99 said:
Hi
Sorry if this is a repost but I couldn't find answer anywhere.
I am looking to get a 3m cable to charge my Note3, the extension cables I have tried have varied in success, I have 1 that works well and is fast but the wife has claimed it and I can't find where I got it from.
I am happy to use the supplied plug, extension (e meters) and OEM cable or the supplied plug and a complete USB to USB 3.0 micro B cable (3meters). Does anyone know of a tried an tested 3 meter cable that offers a good charging time?
Also, does the USB 3 micro B cable charge faster than a standard USB to micro USB cable? I know the transfer rate is quicker just not sure if the charge/power rate is better?
Any help appreciated.
Jon
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
The charging rate is the same. The difference is in the carrying capacity of the cable (the cable rating). If the port you're using can output enough Amps to make charging faster (the stock wall charger is 2.1 Amp), you also need a good cable to go along. The cable that comes with the phone is able to sustain 2A charging rates. But if you're buying a 3rd party cable, check the Amp rating. USB 2 or 3 won't matter if the cable can only sustain 1A current flow. This purports to be able to carry 2.1 Amps... http://www.amazon.com/Hi-mobiler-Hi-Speed-Gold-Plated-Connectors-Smartphone/dp/B00TCBTFYK
Thanks for the response, the information is good to have. Unfortunately this item doesn't ship to Scotland but now I know what spec details I'm looking for.
Sent from my SM-N9005 using Tapatalk
I have 2 of these 3 meter Mediabridge USB 2.0 cables I really like. They're rated for at least 2.5 amps.
Sorry but I can't post links yet since I don't post often. Below is the info though.
Mediabridge USB 2.0 - Micro-USB to USB Cable (10 Feet) - High-Speed A Male to Micro B
Amazon ASIN: B00CTUIT20
Item model number: 30-004-10B
You might try this 10' 24/28GA USB cable from monoprice ($1.46) There's a 15' one, too, costs a whole 0.50 more.
The issue with long cables is that, if you use thin conductors, there's a voltage drop (resistance drops voltage), which can reduce charge speed or even put you out of USB spec. These cables use thicker conductors to carry current.
Don't let the prices fool you; monoprice cables are pretty decent.
Thanks for all the answers and advice. One of the cables was £90! The others don't deliver to Scotland
Sent from my SM-N9005 using Tapatalk
jonro99 said:
Thanks for all the answers and advice. One of the cables was £90! The others don't deliver to Scotland
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thats about £86 more than I paid per cable.
I saw this one on Amazon UK for £5.99. In the customer Q & A section someone said it delivered a full 2 amps.
Item model number: AK-A7105011
ASIN: B00MM0M6SU
Like the look of them RylanM, thanks
They do a braided nylon option which would really suit my needs.
Poor reviews on the springs on the micro USB end though which surprises me with anker
Sent from my SM-N9005 using Tapatalk
I posted the following yesterday but it didn't seem to be here today....
I used an app called ' Galaxy charging current' to check the current being delivered. I found the following.
Always using the supplied OEM 3pin plug.
1. OEM cable only = 1200mA
2. 3m USB extension and OEM cable = 650mA
3. 3m braided USB to micro USB = 850mA
I'm going to test my wireless charger at work tomorrow.
Sent from my SM-N9005 using Tapatalk
jonro99 said:
Like the look of them RylanM, thanks
They do a braided nylon option which would really suit my needs.
Poor reviews on the springs on the micro USB end though which surprises me with anker
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I bought both the 3ft and 10ft red braided cables on the 29th of may, used them almost daily since (10ft for sure, 3ft I only use in the car so not as often) and I've got no issues with the retaining pins. In fact they're bloody stiff, they fit in my Nexus 7's loose USB port (dropped it with a cable plugged in, ruined the cable, loosened the USB port) as if there's no issue at all.
Also got the 6ft non-braided one for a mate (he doesn't have Prime) on the 29th of March and I haven't heard him complain about it at all. It may just be a bad batch with failing pins.
If you want any pics/info on the red braided cables feel free to ask.
Have you checked amazon? Compare prices to ebay

Categories

Resources