IT IS NOT MY FAULT IF YOUR DEVICE(S) BREAK/MAKE A BACKUP IN RECOVERY TO GO BACK TO!
I need some testers to test the guide on ZV8 PM me if you want to test it. You just need to report back to me if it worked or not and what carrier(s) your using this on and what kind of connections your getting.
________________________________________________
ZV4-ZV6
Step 1:
Download "Shortcut master" pro or lite doesn't matter (https://play.google.com/store/apps/details?id=org.vndnguyen.shortcutmaster.lite)
Step 2:
Go into "Shortcut master" and click the little 3 dot (menu) and click "Search..."
Step 3:
Click the little drop down in the upper left corner and select "System apps" (Just to narrow things down )
Step 4:
Then on the line labeled "Enter text to search" (search bar/line) and then type "IOT" then click the "Search" button
Step 5:
Click on the option that says "com.lge.SprintHiddenMenu.iot.IotHiddenMenuMain" some options will come up click on the little star that says "Favorite" and then click "Launch" and grant shortcut master su permisson (The star just makes a shortcut on the home screen for quick access)
Step 6:
Click on Network mode and use the drop down menu to scroll down and select "GSM only" If done your signal bar(s) should have a little red "x" over them. (This part does not work on ZV8 but I am working to fix it)
Step 6
Click the back button until you get back to "Shortcut master" then search for "apn"
Step 7:
Click on "com.lge.hiddenmenu.vzw_only.ApnSettings" and "Favorite" then launch it like before
Step 8:
Create a new Apn I wouldn't delete any system one's you may end up not getting data or not being able to send MMS (pictures)
Step 9:
Save your settings and reboot (this way the apn and the radio(s) restart. If you really dont't want to reboot you can go into a terminal emulator and run these commands: su then press the enter key then type killall rild then press enter. This will restart your radio(s) the same thing happens when you reboot.)
Step 10:
Go to settings>roaming>scroll down for GSM settings (Check the GSM box and agree to the pop up)
________________________________________________
ZV8
________________________________________________
Revert:
Step 1: Go back into your IOT settings and select system selection and change it one of the cdma options
Step 2: Go back to the apn settings and swap them back to "Internet"
Step 3 Reboot and have cdma again
________________________________________________
View attachment 3045991
View attachment 3045992
View attachment 3045993
View attachment 3045994
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
________________________________________________
Working on/Thank you to:
*T-Mobile (Thanks jamesb85)
*Straight talk (Thanks Surrylic)
*Airttel India (Thanks aukhan)
*New cloudy G3 link (Thanks Surrylic)
You tell me (all other ones)
________________________________________________
FIXES-
HiddenMenu force close:
Some say there are problems with the hiddenmenu force closing I recommend that you install this copy of my hiddenmenu that I use View attachment HiddenMenu.apk. Install to system>app>. Also make sure that you have your sprint sim in while you do this then put in your other sim. This is from my stock g3 ROM so I guess (thanks lg for the apk)
It's not working at all:
For some this doesn't work at all I recommend you change your rom to this one it works for me http://forum.xda-developers.com/sprint-lg-g3/development/rom-stock-zv6-base-odex-deodex-t2949087 (Stock ZV6 I'm using the odex version).
Straight Talk fix (>>>maybe<<<):
For some with straight talk wireless they can not get it to work at all. So I was thinking and I was thinking and I figured that you could go into your dialer app and dial the following code (depending on ROM) here it is: ##update# (##878283#) <<< Cheat Cheat. This will reboot your phone and update your network profile/prl and might work or break your phone. Make a back up before doing this! UPDATE*You may want to use the cloudy g3 rom http://forum.xda-developers.com/devd...6315#downloads(make sure to download 1.2) its based of the international rom but may fix your gsm some members say it does. But you still have to follow my guideUPDATE*
If after doing this wifi calling or any sprint apps go missing then check out this thread: http://forum.xda-developers.com/sprint-lg-g3/help/fix-missing-wifi-calling-zv4-t2842102
-------------------------------------------------------------------------------------------------------------
Second Method (Cm12 based)
I finally found a way to get my phone unlocked on cm 12! The method below is not mine I am just sharing a guide! All credits go to D-FUSE for making this amazing rom I a just putting together a guide in order to help
Go to this thread: http://forum.xda-developers.com/spr...m-unoffical-dirty-unicorns-beta-test-t3039365
1) Download the latest version
2) Download gapps
3) Download the GSM build.prop
4) Download ZV4 baseband
Once you have them all downloaded flash all 4 in recovery at once then reboot. Make sure your GSM sim is in the phone when you are rebooting. Go through the set up and everything.
5) Go into the settings and click "More"
6) Click "cellular networks"
7) Click "apns"
8) Scroll down and find yours.
9) Reboot.
Once you have rebooted you should see your signal if you don't then keep reading.
1) Open your phone app
2) Dial *#*#4636#*#*
3) Click the first option and scroll down
4) Click your network type and scroll down the menu then click "LTE/GSM"
5) Once your connection has been established go ahead and reboot
Or.....
Download a terminal app from the playstore
1) Once in a terminal app type the following commands (run each command on it's own.
su <Gets SuperSu premissions
(Press enter/return)
killall rild <kills your radio then makes it restart
(Press enter/return)
If you have any more problems PM me for the quickest help or comment!
I'm assuming this is for stock only?
Update I reverted to stock and followed all directions but it wouldn't read my T-Mobile Sim card.
Yes im using the stock zv6 try going into settings>roaming>avaiable gsm networks and select tmobile also correct the apn
I wonder what data connection options there are when on gsm? I think it's just cdma... no lte on gsm side correct?
Well i dont have anything gsm but I would think so
To see all connections go on the playstore and search "4636" should be the first one (looks like a blank android guy)
My is already unlocked and currently using Airtel India should i follow or use this ??
Will the phone still work on Sprint after this, or does this make it GSM only?
Screenie
aukhan said:
My is already unlocked and currently using Airtel India should i follow or use this ??
Click to expand...
Click to collapse
you can try I don't know about the connection types in your country but if it doesn't work you can use the revert guide
meyerweb said:
Will the phone still work on Sprint after this, or does this make it GSM only?
Click to expand...
Click to collapse
it will still work on sprint just use the revert guide
jamesb85 said:
Screenie
Click to expand...
Click to collapse
Can you please explain what that is (the screenshot)
Can you please post what carrier and network this worked for you on
That screenshot is showing my ls990 phone connected to t-mobile's hspa+ network. At my job i get around 12mbps... Not the best... But with sprint i have no call, no text, no 3g, no lte, in the same spot.... Im happy as hell ever since i popped in the sim.
jamesb85 said:
That screenshot is showing my ls990 phone connected to t-mobile's hspa+ network. At my job i get around 12mbps... Not the best... But with sprint i have no call, no text, no 3g, no lte, in the same spot.... Im happy as hell ever since i popped in the sim.
Click to expand...
Click to collapse
So it worked? And you used my method?
Lol no.... Not exactly.. Sim unlock has been established... No one reads anymore... People are still assuming it hasnt been unlocked.. Just read...
jamesb85 said:
Lol no.... Not exactly.. Sim unlock has been established... No one reads anymore... People are still assuming it hasnt been unlocked.. Just read...
Click to expand...
Click to collapse
What do you mean? (Please clarify)
My Sprint Version worked Well the steps provided by you , I was able to switch to GSM and Got the APN settings changes Via Tweaker App from Playstore.
Ok thank, what carrier was it?
1619415 said:
What do you mean? (Please clarify)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2852645
Its been discussed since august...
Edit: heres another.. A bit messy though id say....
http://forum.xda-developers.com/showthread.php?t=2853594
Related
1.Install Samsung Kies - need for drivers.
2.Obtain root privileges
3.Turn on the phone USB debugging
4.Unpack the archive ADB.zip, for example, drive C: (the old version 1.0.29 - not suitable).
5.Run in Windows command line.
6.Enter cd c:\adb
7.adb shell
8.On your phone, leave message "Allow USB debugging?" - Click OK.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
9.In the input line (copy) the following: am start com.sec.android.app.personalization/com.sec.android.app.personalization.Personalization
10.The phone displays the window for entering the code(Network UnLock - Enter Control Key).
:good:
thanks man , it is very interesting information, did you try it yourself? or has anyone tested this? once we unlock the gsm module i have a big question, where do we get the unlock code? (calling sprint is not an option for those of us who bought it off ebay bad esn for international use) i ve been searching on the net and none of the usual unlocking companies carry the code for the galaxy mega sprint l600 if anybody knows where to get the code many people would be thankful
robbieboy said:
thanks man , it is very interesting information, did you try it yourself? or has anyone tested this? once we unlock the gsm module i have a big question, where do we get the unlock code? (calling sprint is not an option for those of us who bought it off ebay bad esn for international use) i ve been searching on the net and none of the usual unlocking companies carry the code for the galaxy mega sprint l600 if anybody knows where to get the code many people would be thankful
Click to expand...
Click to collapse
I am also looking for the code if I can find solutions will write
you need to ask this guy @utoprime he was able to unlock Sprint
Removing SIM network lock
Go to dial pad and enter: *#0011#
==> [MENU] + [Back]
==> [MENU] + [Key Input] + "Q"
==> [MENU] + [Key Input] + "0000"
==> <wait ~5-10 seconds>
then you need to perform as written here
For those with the Mega, the Menu#'s are 1863, not 1663...... but it wil not display #3 at all. One still needs to unlock the Personalization part.
Code:
[SIZE=2]UMTS MAIN MENU[/SIZE]
[SIZE=2][1] DEBUG SCREEN.[/SIZE]
[SIZE=2][8] PHONE CONTROL.[/SIZE]
[SIZE=2][6] NETWORK LOCK[/SIZE]
[SIZE=2][3] PERSO SHA256 OFF[/SIZE]
[SIZE=2]Go Back to Main Menu[/SIZE]
[SIZE=2]UMTS MAIN MENU[/SIZE]
[SIZE=2][6] COMMON[/SIZE]
[SIZE=2][6] NV REBUILD.[/SIZE]
[SIZE=2][4] Restore Back-up.[/SIZE]
[SIZE=2]Reboot[/SIZE]
Located both Perso and Settings that involve in the unlock but what you all do and how you do it is up to you.
On the phone com.sec.android.app.personalization.Personalization & com.android.settiings.SimPersoLockSettings. I am a CDMA user so I have no need to unlock my phone at all. You all would need to search for it and modify anything needed.
Oh and when one does this at the bottom to get into Service Mode take the " QUOTES " literal and the 5-10 is more like 10-15 seconds.
=========================================
Go to your phones dial pad and enter: *#0011#
It will take you to the locked Service Mode...
To Unlock do the Following: up up down down left right left right b a st...... LOL JK.......
[Touch MENU KEY] then [Touch Back]
[Touch MENU KET] then [Touch Key Input] then enter "Q"
[Touch MENU KEY] then [Touch Key Input] then enter "0000"
Wait 10 to 15 seconds. You will notice the screen clears and leaves a zero at the top left corner.
Then you will get the Unlocked Service Menu with numbers.
DarkAngel said:
For those with the Mega, the Menu#'s are 1863, not 1663...... but it wil not display #3 at all. One still needs to unlock the Personalization part.
Code:
[SIZE=2]UMTS MAIN MENU[/SIZE]
[SIZE=2][1] DEBUG SCREEN.[/SIZE]
[SIZE=2][8] PHONE CONTROL.[/SIZE]
[SIZE=2][6] NETWORK LOCK[/SIZE]
[SIZE=2][3] PERSO SHA256 OFF[/SIZE]
[SIZE=2]Go Back to Main Menu[/SIZE]
[SIZE=2]UMTS MAIN MENU[/SIZE]
[SIZE=2][6] COMMON[/SIZE]
[SIZE=2][6] NV REBUILD.[/SIZE]
[SIZE=2][4] Restore Back-up.[/SIZE]
[SIZE=2]Reboot[/SIZE]
Located both Perso and Settings that involve in the unlock but what you all do and how you do it is up to you.
On the phone com.sec.android.app.personalization.Personalization & com.android.settiings.SimPersoLockSettings. I am a CDMA user so I have no need to unlock my phone at all. You all would need to search for it and modify anything needed.
Oh and when one does this at the bottom to get into Service Mode take the " QUOTES " literal and the 5-10 is more like 10-15 seconds.
=========================================
Go to your phones dial pad and enter: *#0011#
It will take you to the locked Service Mode...
To Unlock do the Following: up up down down left right left right b a st...... LOL JK.......
[Touch MENU KEY] then [Touch Back]
[Touch MENU KET] then [Touch Key Input] then enter "Q"
[Touch MENU KEY] then [Touch Key Input] then enter "0000"
Wait 10 to 15 seconds. You will notice the screen clears and leaves a zero at the top left corner.
Then you will get the Unlocked Service Menu with numbers.
Click to expand...
Click to collapse
What do you do after you will get the Unlocked Service Menu with numbers?
Gabriel51 said:
What do you do after you will get the Unlocked Service Menu with numbers?
Click to expand...
Click to collapse
Well it's service mode mainly used for when being serviced or by who have you. Read here for more info:
http://forum.xda-developers.com/showthread.php?p=52255294
The normal user does not usually go in here as they can really mess with things, just like the ##3282# ( ##DATA# ). You need your PRL # to edit your info but you can view all you want.
guys who turned out to unlock L600 ?
I think that you should try to 4.2.2
anybody was actually able to unlock their l600? i've been trying to get this thing unlocked by sprint with no luck
The information contained in this thread is inconclusive to me.
I don't see a resolution here, it's like knowing the path and no way to get there...
I have unlocked pretty much everything in my L600 Sprint to use other network towers, like AT&T for example. But because my phone is locking out my AT&T Sim I can't get a signal to place any calls. The Sim Lock feature in settings activates. And of course I do not have the PIN code. One good thing is every time I try to enter a PIN code, it shows "0 attempts left". So I can try as many times as I want. Could it be possible to write a program like a password cracker to get in? I don't know. But it's a thought.
I have my MSL code. And I tried to get the network lock screen to open like in the original post above. But I get a permission denied message. Overlook the fact that I entered the info wrong at first. Then I corrected it and tried again. Here is a shot of what is going on. Maybe somebody can learn from this.
4.2.2 stock - rooted - SuperSU
Ok. Turns out I forgot to put "su" first. After that, the network unlock window popped up. My supposed MSL didn't work there. Is the MSL different than the network unlock key? (confused)
joem789 said:
Ok. Turns out I forgot to put "su" first. After that, the network unlock window popped up. My supposed MSL didn't work there. Is the MSL different than the network unlock key? (confused)
Click to expand...
Click to collapse
yes the MSL code is different than the UICC code
I'm currently working on a unlock procedure for the G900P and N900P but figured I could stop in here to help you guys. First off, does anyone happen to still be on 4.2.2 (NOT 4.4.2)? If so, are you rooted? I haven't been able to find a firmware to pull the modem out of but I do believe every 4.2.2 modem has the ability to access the nvm/num efs folder which contains the nv item required for the intl unlock.
Sent from my SPH-L720 using XDA Free mobile app
ecs87 said:
I'm currently working on a unlock procedure for the G900P and N900P but figured I could stop in here to help you guys. First off, does anyone happen to still be on 4.2.2 (NOT 4.4.2)? If so, are you rooted? I haven't been able to find a firmware to pull the modem out of but I do believe every 4.2.2 modem has the ability to access the nvm/num efs folder which contains the nv item required for the intl unlock.
Sent from my SPH-L720 using XDA Free mobile app
Click to expand...
Click to collapse
My phone is 4.2.2 and rooted.
I have phone with 4.2.2 and rooted. Can I help you to dump it ?
What build is it on? Afaik, it might need to be on a MIx build (replace the x with a number, I forget the exact build).
Sent from my SPH-L720 using XDA Free mobile app
[Q&A][FAQ][SAC23] [N3][DarkLord S6 Ported]FAQ, Q&A and User Guide for Sac23 ROM's
This is the first of many guides I will be posting and keeping up with.
It will be utilized for Q&A FAQ and HOW TO so we can keep the development thread for development purposes.
Post your questions and Myself or other knowledgeable users of Sac23 ROMS will answer as quickly as possible.
So ......
FAQ:
what do i do if its not booting on start up A- pull battery then restart.(IF YOU HAVE A REMOVABLE BATTERY)
after booting im getting a services have stopped wait or close A- pull the battery and restart.(IF YOU HAVE A REMOVABLE BATTERY)
the tweaks open then close help? A- need to deny super user for it then go in and change what u want then re enable superuser for it
how to install
install like u would any rom then wait for 2 min ( if wont boot )
pull battery and restart then you'll see optimizing apk's count down.(IF YOU HAVE A REMOVABLE BATTERY)
***Guys This Is A Port So remember it will have small glitches here and there but all in all should be stable ***
For starters HOW TO INSTALL a ROM by SAC23
Installing with TWRP (View All Supported Devices>>> Find TWRP for your device):
Philz can be used and I will post instructions for it later https://www.mediafire.com/folder/qc3z1c59s8g03/PHILZ
This assumes that you ALREADY have TWRP Recovery installed on your phone and you know how to use it.
Download the ROM of choice...move it onto the EXT SD CARD.
VERY IMPORTANT>>> Move all music, pics, important data from internal storage to the ext SD card and/or to your pc, etc. because during this process, the internal will be completely erased.
Recommended Method to Flash SACS Custom ROMS using TWRP
Boot into TWRP
Select Wipe > Advanced Wipe
Select Dalvik, System, Data, Internal Storage, and Cache. Swipe to Wipe (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Select Format Data, Type YES, Press GO. (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Swipe to Factory Reset. (do this THREE TIMES)
Go back to MAIN menu and STOP HERE !!!!! READ NEXT STEP CAREFULLY....
[*]Select REBOOT INTO RECOVERY mode and Swipe to Install Super User. DO NOT REBOOT INTO SYSTEM!
[*]AFTER THE PHONE REBOOTS INTO RECOVERY:
NOW proceed with installing The ROM
Select Install Zip, Drill down to Sac23's Rom you want to flash, and Swipe to install.
Follow on screen instructions (if there are any).
When prompted, REBOOT SYSTEM.
THE FIRST BOOT WILL TAKE A MINIMUM OF 20 MINUTES..... SOME DEVICES EVEN LONGER...
.
.
HAVE PATIENCE
When the Home Screen appears and it is obvious that the install has completed, allow the phone to settle for another 10 minutes BEFORE you begin setting up your personal preferences and accounts.
If everything seems normal, set your phone up and profit.
IF IT WON'T BOOT....(IF YOU HAVE A REMOVABLE BATTERY)...try pulling battery and replacing battery then restart phone and you should see "Android Updating"
After setting up your personal info and you are now ready, the first thing you should always do after flashing any ROM is to go to settings, system updates, and refresh/update your PRL & PROFILE then reboot the phone. Second thing is go to settings, more networks, mobile networks, network mode, and select LTE/CDMA.
[TOOL]multirom-recovery-replacement
frenchel said:
Hey has anyone tried this out yet looks like a good idea for switching between ROMS.... [TOOL] [MultiSystem] MultiROM and Recovery Replacement for Android
Click to expand...
Click to collapse
@frenchel post the link please
THANK @hsbadr for this AWESOME TOOL
GOT IT http://forum.xda-developers.com/android/software-hacking/tool-multirom-recovery-replacement-t3102395
READ everything about MultiSystem here & Q&A thread
BACKUP all your data to an external storage or computer
INSTALL a stable stock ROM for your stock system
PARTITION your microSD card as described (here)
DOWNLOAD the latest version of MultiSystem APK HERE
MOUNT rootfs & system read/write in Terminal Emulator
Code:
su
mount -o remount,rw rootfs
mount -o remount,rw /system
Click to expand...
Click to collapse
INSTALL BusyBox to /system/xbin
INSTALL MultiSystem APK & open it
INSTALL MultiSystem binaries by pressing Install button
UPDATE BusyBox by runnig the folowing commands in Terminal Emulator
Code:
su
MultiSystem advanced update_busybox
Click to expand...
Click to collapse
REBOOT to check LED indicator for boot options
CHECK permissive SELinux after reboot
Now, you should be able to create a virtual ROM & boot into it...
how to fix DATA/APN/NO SIM card issue & how to ADD EXPOSED for LOLLIPOP
Thank you @Josephigloe for the detailed
how to fix DATA/APN/NO SIM card issue
and to @indyjames
Josephigloe said:
Flash rom
Flash this
https://www.dropbox.com/s/qjfv1yhydhdzloa/apn-1.zip?dl=0
Then this
https://www.dropbox.com/s/yuuezm45bc5mh9o/sprpure2.0buildprop.zip?dl=0
or this ... http://is.gd/nz4gXM
Supersu settings check cleanup for new install from playstore
Then this.
https://www.dropbox.com/s/sfs89p5ia7b2ks8/GTv3.1.5.apk?dl=0
Update
https://www.dropbox.com/s/w1br8o1vy0b1tca/GTUpdate2_v3.1.8.apk?dl=0
Set: 1st box =spr press set
Set: 2nd box=xas press set
Scroll down press apn
REBOOT:
go to apn add + this apn
Name: Sprint LTE Internet
Apn: n.ispsn
Proxy: not set
Port: not set
Password: not set
Server: not set
Mmsc: http://mms.sprintpcs.com
Multimedia message proxy: 68.28.31.7
Multimedia message port: 80
Mcc: 310
Mnc: 120
Auth type: none
Apn type: default,mms,dun
Apn protocol: ipv4/ipv6
Apn roaming protocol: ipv4/ipv6
Bearer: unspecified
Save
Reboot select the apn you just set.
And delete all the rest so it's unable to switch.
Profit.
I've been on for a week with no issues.
Click to expand...
Click to collapse
indyjames said:
I believe the fc is due to the lock screen..just change the lock screen effect and the FC's will go away.
Click to expand...
Click to collapse
STEP-BY-STEP INFO FOR XPOSED FOR LOLLIPOP
THANKS @Ali1353
Ali1353 said:
I really don't remember who posted theses files but thanks to whoever did.
1) download these 2 files and save them on your SDcard
2) go to recovery and flash xposed-sdk21-arm-20150430-arter97-V3.zip
3) Reboot
4) wait a couple of minutes ( mine took almost 5 minutes)
5) install Xposed Installer_3.0-alpha2.apk ( I tried it a couple of times since I got error but finally did)
6) Reboot
7) I lost data which was weird
8) Went back to recovery and formated Dalvik and Cache
9) Rebooted back
10 ) go to your apps and run Xposed Installer , then Download , select whatever you like ( I like YouTube AdAway and YourTube)
11) in the download section swipe the screen from right to left and press download on the latest one ( after selecting what you like)
12) install
13) go back to the xposed installer screen and select Modules, select them ( check-marks)
14) Reboot and profit
:good:
http://forum.xda-developers.com/attachment.php?attachmentid=3338484&d=1432941763
http://forum.xda-developers.com/attachment.php?attachmentid=3338485&d=1432941763
Click to expand...
Click to collapse
future use 3
future use 3
I might need this thread later...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
good idea I'll join you
Me 2
Anyone have trouble installing with latest TWRP? Mine says Failed.
Guys... may be a bad upload
We will re-upload after work
@rlmiller @sac23
only issue so far is the delay on the lock screen when you try to wake up the phone. also while on the lock screen it never go black. it will just sit on the lock screen until you press the power button.
Some lock screens do that
Ok so im installing potato clock in the center its good but i cant figure out how to remove to stock clock on the right i have 2 clocks.
sac23 said:
Some lock screens do that
Click to expand...
Click to collapse
i switched all of the lock screen effect and they all lagged
When you select NONE it works fine but it doesnt time out.
For potato clock if u have 2 clocks just reboot will fix issue
sac23 said:
For potato clock if u have 2 clocks just reboot will fix issue
Click to expand...
Click to collapse
when i reboot i get the no sim card error and loose data i have reinstalled and everything is goo i get 4g but if i reboot to get rid of the 2nd clock i get the sim card error any idea how to fix?
Does this use the Sprint Lollipop modem and baseband that you would have if you took the OTA?
Does this rom have wifi calling
Was the link taken down becuz of small bugs? I'm dying to give this rom a shot with the edge feature. Been watching all the posts. The team you guys have always put together impressive work. But this one by far has me itching. Cant wait, cant wait, cant wait!!
---------- Post added at 07:21 PM ---------- Previous post was at 07:20 PM ----------
Josephigloe said:
when i reboot i get the no sim card error and loose data i have reinstalled and everything is goo i get 4g but if i reboot to get rid of the 2nd clock i get the sim card error any idea how to fix?
Click to expand...
Click to collapse
Could you maybe go in xposed and hide the stock clock? I think that will work.
Any plans to finish/fix the MOAR 5.0 Port? Big fan of the previous MOAR port, still my daily driver.
yeah same here having sim care issues worked until i reboot now it won't go away
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not responsible if this breaks your phones! this was made just for fun and to help the community
Working:
Data
Messaging
Video recording
SDCard Read/Write
Root
Display
Touch screen
Profiles (Multi Users)
Google Account Syncing
Everything else
Not Working:
NFC
Video Play Back- From what I can tell it is a CM bug
How to install:
Download the ROM, GSM Patch, Gapps and save them
Boot into TWRP and make a backup of your current ROM
Wipe your Cache, Data, System and Dalvik Cache
Flash the files in this order:
1) ROM
2) GSM Patch File
3) Gapps
Now reboot and setup your phone
Downloads:
ROM: Link removed until I can figure out the video bug
GSM Patch: Latest GSM patch file
Gapps: My preferred 5.1.1 Gapps
Addons:
ZV4 Modem
ZV8 Modem
Mega APN Flashable
Latest (Stable) SuperSU flashable
This took like 15 minutes to get working .... So please show your support by clicking the :good: button
XDA:DevDB Information
[ROM][GSM][UNOFFICAL][5.1.1] CM12.1, ROM for the Sprint LG G3
Contributors
1619415, Ki11aprime
Source Code: https://github.com/CyanogenMod/android_device_lge_d851/tree/cm-12.1
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-06-10
Last Updated 2015-06-10
Reserved
Oh yeah baby. Cant wait to test drive this.
Sweet! ROM file states that it is for 851 model?
I am downloading now but when I did the ROM DL the docs file says d851 its for the ls990 right? Just wanted to make sure! Anyone flashed this on their ls990 with success? Thanks can't wait to try!
EDIT: I am having a hard time downloading the ROM it tries to start but never does. Any ideas ? Thanks!
EDIT2: I got it to DL by using the asop stock browser! I am getting my batt up some then I'll flash! Thanks!
ok will try it out right now, and report back...
savannahmick said:
I am downloading now but when I did the ROM DL the docs file says d851 its for the ls990 right? Just wanted to make sure! Anyone flashed this on their ls990 with success? Thanks can't wait to try!
Click to expand...
Click to collapse
I have it running on my phone now.... Just follow the install guide and it will work great.
Flashed and it, GSM works out of the box, i still have no Cell data tho :S .... if i could just acces the COM port to add additional bands or to see what bands it has enabled i could see if i can enable data, but other than that, it detects the SIM right away
kiewirevo said:
Flashed and it, GSM works out of the box, i still have no Cell data tho :S .... if i could just acces the COM port to add additional bands or to see what bands it has enabled i could see if i can enable data, but other than that, it detects the SIM right away
Click to expand...
Click to collapse
OK, awesome
1619415 said:
OK, awesome
Click to expand...
Click to collapse
do you know how i can acces the COM port? i want to try the band enabling stuff from another post but i need the phone to be set to "charge only" and be detected as a COM port... any ideas?
kiewirevo said:
do you know how i can acces the COM port? i want to try the band enabling stuff from another post but i need the phone to be set to "charge only" and be detected as a COM port... any ideas?
Click to expand...
Click to collapse
Stock, Barepop or the pure stock rom then I think there is a guide....
Is video playback broken or just me? Also if I unlock the LTE bands using a stock ROM then come back to this ROM everything should still be good right?
Cuz_Murica said:
Is video playback broken or just me? Also if I unlock the LTE bands using a stock ROM then come back to this ROM everything should still be good right?
Click to expand...
Click to collapse
Not sure....
1619415 said:
Not sure....
Click to expand...
Click to collapse
I'm a do it anyway. No harm no foul.
Cuz_Murica said:
Is video playback broken or just me? Also if I unlock the LTE bands using a stock ROM then come back to this ROM everything should still be good right?
Click to expand...
Click to collapse
First post NFC not working. Also video play back ?????.
localpagefirst said:
First post NFC not working. Also video play back ?????.
Click to expand...
Click to collapse
Yes, it is a CM bug from what I can tell..... I will update in a few days/weeks and see if that fixes it
Hey man i have this idea for my phone, I've tried to add the bands and everything and it seem to have worked (take it with a grain of salt), since i can choose any band now and it says "SUCCESS"... i enter in the modemsettings and i'm able too choose any network i want, before i wasn't able to choose all of them and now there is no problem after editing the NV values from the post...
now i am not entirely sure but since the WCDMA band my operator works with is 900 i think it does not detect it because of the "Model #" so my idea is as followed, i see you took the cm12.1 from a d851 and made it flashable, can you do the same for a d855 (which is the international version) and PM me or post it?, i will happily try it and see if i can get 3G... as for the LTE bands i can choose any as well but my problem is that i don't have an LTE subscription :V so i cant test that, im only limited to 3G....
you think you can help?
kiewirevo said:
Hey man i have this idea for my phone, I've tried to add the bands and everything and it seem to have worked (take it with a grain of salt), since i can choose any band now and it says "SUCCESS"... i enter in the modemsettings and i'm able too choose any network i want, before i wasn't able to choose all of them and now there is no problem after editing the NV values from the post...
now i am not entirely sure but since the WCDMA band my operator works with is 900 i think it does not detect it because of the "Model #" so my idea is as followed, i see you took the cm12.1 from a d851 and made it flashable, can you do the same for a d855 (which is the international version) and PM me or post it?, i will happily try it and see if i can get 3G... as for the LTE bands i can choose any as well but my problem is that i don't have an LTE subscription :V so i cant test that, im only limited to 3G....
you think you can help?
Click to expand...
Click to collapse
which guide did you use to add bands?
xevildoerxx said:
which guide did you use to add bands?
Click to expand...
Click to collapse
this one:
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
but be extremely carefully a flash to stock will make you lose your ESN and MEID and you will have to enter a new IMEI from another phone to make it usable on GSM again...
also adding bands is kind of a tedious process, so you need to thoroughly check if they where properly added (with shortcutmaster in modemsettings) if you get a FAILED or SUCCESS, because its a pain to flash to stock>root>unlock bootloader over and over again to do the process all over again.
But as far as i know ive been able to add all the bands but the one i use "WCDMA 900" i not readed by the phone, even if i set the band only to check that, i can also check every LTE band now but i cant prove if it works or not.
View attachment 3357210
http://www.lg.com/us/cell-phones/lg-LS990-Metallic-Black-g3/technical-specifications
kiewirevo said:
this one:
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
t.
Click to expand...
Click to collapse
Which ROM did you flash to do it?
In the Xperia user group in
cafe.naver.com/x1smart
I'm HTCMAGE.
Last year, Xperia 1II.
How to activate VoLTE.
After the guide version,
VOLTE Success, Activation without Firmware Replacement (Sony Mobile withdrawal area)
Hello Xperia users! In the meantime, I finally solved the VOLTE problem! I approached Qualcomm's diagnostic port-active-efsExplorer and solved the problem by inserting a VOLTE profile from my carrier :) Sorry, this is Korea and I am Korean...
forum.xda-developers.com
5II and...
Xperia's 1III/5III products.
Activating VoLTE and...
"Root".
I'll share how to turn it off.
I am not good at English.
I use the translator.
Please understand.
https://developer.sony.com/develop/open-devices/get-started/unlock-bootloader
Later, to unlock.
Maejiseukeu manager app.
Patch. magiskFiles img
While connected to your computer with a usb
You can use the instructions below at least adb.
adb reboot bootloader && fastboot flash boot "magisk.img" && fastboot reboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then, you can install it.
It's going to rebooted.
This is the restart screen. It's connected to USB.
Always allow debugging when enabled.
Connect to Wi-Fi and do not log in.
Please move on quickly.
Turn off the internet quickly (Mobile data X)
Save the magisk manager app on your computer.
Then go to Xperia and install it.
github.com/topjohnwu/Magisk/releases/tag/v23.0
Please make sure the Internet is turned off.
I'll carry it out. Magisk Manager in the upper right corner.
Cogwheel - Setting page - Middle.
Activate "Hide".
When it's done, we'll start the VoLTE patch.
At least ADB.
Adb shell.
Enter and enter.
su
If you type it in,
In the same window as the picture below,
If you allow it,
The shape of the dollar...
It changes to #.
setprop persist.usb.eng 1
Enter and enter.
It's from My Computer Properties Device Manager.
There are several floating yellow exclamation marks.
Drive manually.
Please hold it.
Among the yellow exclamation points,
We don't know which part is connected.
Please select a few targets and update them manually.
Update Driver - Browse to My Computer
Directly select the list available on your computer.
Port-QUALCOM 9081 choice.
Starting with the ELS Explorer selection LAHA (based on 1 III).
This is something that can go in. If you connect...
Please copy and paste the EBS file.
(Use the mouse to pull it in and put it in twice.)
I'll make a folder that doesn't exist.
Put it in twice.
Policyman folder delete the existing one.
You can put it in and the NV at the top...
Likewise, place it at the top.
Close the window when done.
adb shell su -c setprop persist.dbg.volte_avail_ovr 1
adb shell su -c setprop persist.dbg.vt_avail_ovr 1
And then "adb reboot".
If you type Enter, we'll reboot you.
On the basic Soonjung phone app,
Check IMS status in *#*#4636#*
If it's available, it's good.
Wi-Fi or data on.
Log in various ways. Google, Sony accounts,
Update the Play Store and...
Various basic apps (Netflix)
Update everything.
And information on the bottom of the Play Store,
It should say play protection certification.
If you run the magisk manager app,
If you check out the following,
I reboot on my own.
Reboot and run the manager app again.
Please press "Remove the Magisk".
Completely removed.
Then I'll start deleting and reboot on my own.
Delete completed.
Finished.
It's easy to use.
Netflix is also on PlayStore.
It'll be updated normally.
root
If you maintain the route,
I change my font or record on the phone.
When you do the whole gesture, remove the bottom white stick.
That's one of the advantages.
You can choose Xperia.
The users can choose.
https://forum.xda-developers.com/t/...-mobile-withdrawal-area.4144701/post-83277123
In the old guide version,
My English skills that I'm not good at...
This person translated it.
Please keep in mind.
The EBS file (VoLTE file) is...
It's in Sony firmware.
In the country you're using,
All the mobile carrier files are in here.
You can use that.
It's in the policy man folder.
You must modify the XML file!
In the area that was withdrawn,
I don't have a mobile carrier band code.
Make sure to change it to a notepad.
If you change the XML file,
VoLTE, of course.
5G works normally, too.
My poor English skills...
Someone wise.
Please deliver it.
We wish.
Be happy always.
How can I get the efs file？
/system/vendor/firmware_mnt/image/modem_pr/mcfg/configs/mcfg_sw/generic
It's in the firmware or on the device
So you can either unlock BL & root to have VoLTE, VoWiFi, etc; or keep everything untouched to have Widewine DRM (Netflix HD etc), full camera filter support, etc?
There is just no middle ground, is there :-/
GOOD JOP
How about WiFi calling?
Hazzay88 said:
How about WiFi calling?
Click to expand...
Click to collapse
disabled by Sony
malikin said:
disabled by Sony
Click to expand...
Click to collapse
That's annoying that WiFi calling is disabled.
I hope Sony fix volte issues globally for the upcoming Xperia 1 IV. All other manufacturers such as Xiaomi don't have this issue even if it's a grey import. I don't see why Sony can't fix the problem
Hazzay88 said:
That's annoying that WiFi calling is disabled.
I hope Sony fix volte issues globally for the upcoming Xperia 1 IV. All other manufacturers such as Xiaomi don't have this issue even if it's a grey import. I don't see why Sony can't fix the problem
Click to expand...
Click to collapse
I think nothing will change.
Bofahad said:
I think nothing will change.
Click to expand...
Click to collapse
I will basically stop buying a Sony phone as simple as that.
Hazzay88 said:
I will basically stop buying a Sony phone as simple as that.
Click to expand...
Click to collapse
U can do like what i did (5G)
Bofahad said:
U can do like what i did (5G)
Click to expand...
Click to collapse
Battery consumption is higher with 5G.
What benefits do you get with 5G besides speed?
Hazzay88 said:
Battery consumption is higher with 5G.
What benefits do you get with 5G besides speed?
Click to expand...
Click to collapse
I am happy with 4G as it is more than enough for my general usage.
What I want Sony to basically fix is volte and WiFi calling as that is a deal breaker considering 3G network will be phased out.
If Sony don't fix volte issue then certain countries will not be able to buy the upcoming Xperia phones as it will no longer be able to make calls.
Hazzay88 said:
I am happy with 4G as it is more than enough for my general usage.
What I want Sony to basically fix is volte and WiFi calling as that is a deal breaker considering 3G network will be phased out.
If Sony don't fix volte issue then certain countries will not be able to buy the upcoming Xperia phones as it will no longer be able to make calls.
Click to expand...
Click to collapse
You can enable VoLTE by flashing SEA firmware without unlocking bootloader.
Bofahad said:
You can enable VoLTE by flashing SEA firmware without unlocking bootloader.
Click to expand...
Click to collapse
Yes I have volte working by flashing SEA firmware. Working in Australia on Vodafone only for the Xperia 1 II.
However I haven't heard anyone getting it to work on the current generation Xperia 1 III so that puts further Doubt on the upcoming Xperia 1 IV which would be enough to keep me away and look elsewhere instead. It's not possible to make calls it volte doesn't work and 3G network is shut down
Hazzay88 said:
Yes I have volte working by flashing SEA firmware. Working in Australia on Vodafone only for the Xperia 1 II.
However I haven't heard anyone getting it to work on the current generation Xperia 1 III so that puts further Doubt on the upcoming Xperia 1 IV which would be enough to keep me away and look elsewhere instead. It's not possible to make calls it volte doesn't work and 3G network is shut down
Click to expand...
Click to collapse
It's working with me.
Bofahad said:
It's working with me.
Click to expand...
Click to collapse
That's good to hear.
Which country and carrier are you with?
Also did you get it to work after flashing it with SEA firmware to get it to work
I live in Canada and I have a BC72 (Asian version). I am struggling to get VoLTE and VoWiFi working. I know that mbn file is the key to getting IMS support and sony seems to block some carrier mbn files (only mbn in sales areas are available). So recently I have been working on flashing mbn files to my phone.
UPDATE:
Everything works fine now. Here's the guide:
FIRST THING FIRST: Data is priceless. Always backup before you modify your phone software.
Disclaimer: Not every carrier in the world support VoLTE or VoWiFi. Please ask your carrier first to get more info if you don't know if they provide support to VoLTE or VoWiFi.
Things you need:
1. PC with windows or bootcamp (virtual machines won't work)
2. An Xperia 1 III with magisk installed (see guide here)
3. A reliable USB-C cable
Software you need:
1. EfsTools (from github)
2. Platform tools (from Google)
3. Qualcomm USB diagnostic port driver
4. QPST (from qpsttool.com)
3. mbn files (extract from your phone)
1. Open command line in the platform tools folder, type
Code:
./adb.exe shell
and press enter, you should see a linux shell on your command line starting with $. Then Type
Code:
su
and a super user window should pop up on your phone screen, after you allowing the permission, the $ should change into #, then type
Code:
setprop persist.usb.eng 1
. If your phone asks "Allow access?", press deny; if it doesn't, go to notification centre, find USB options, and select "No data transfer".
2. Go to your device manage on windows, there should be three "Xperia 1 III"s listed. Choose one, right click, and select "Update driver". In the pop up window, select "Browse my computer" and then "Select one from the available drivers". Find Qualcomm USB diagnostic 9091 and select next. Do the same thing for the rest two. For more details, please check this post and there's a Youtube video demonstration.
3. Open QPST Configurator, check the list and find which COM port corresponds to "LAHAINA". Go to the device manager and disable the rest, ONLY KEEP THE PORT FOR LAHAINA. Quit any QPST tools after this.
4. Open command line in the EfsTools folder, type
Code:
./EfsTools.exe efsInfo
and press enter. No error should occur if you configured correctly, and the COM port in step 3 should be shown.
5. Type
Code:
./EfsTools.exe writeFile -i mcfg_autoselect_by_uim -o /nv/item_files/mcfg/mcfg_autoselect_by_uim
and press enter. There is no expected output so that if there's no error message, you are good.
6. Select the mbn file from the mbn folder. Find the mbn file for your carrier. If you're using a secondary operator, please use the mbn file for the main operator (e.g. Koodo -> use Telus mbn). Copy the mcfg_sw.mbn to the root of the EfsTools folder, then type
Code:
./EfsTools.exe uploadDirectory -i mcfg_sw.mbn -o / -v
and press enter.
7. After the command line done it's magic, reboot your phone. Type
Code:
*#*#4636#*#*
in the phone original dialler. Select Phone Information, press the dots at the upper-right corner and select IMS Status, you can check if the IMS status is registered.
Now, you can enjoy VoLTE, VoWiFi, and even 5G (depends on your carrier's support). If you don't see VoLTE or VoWiFi toggle in your phone settings, try install VoEnabler in magisk or run these in adb shell:
Code:
setprop persist.vendor.dbg.ims_volte_enable 1
setprop persist.vendor.dbg.volte_avail_ovr 1
setprop persist.vendor.dbg.vt_avail_ovr 1
setprop persist.vendor.dbg.wfc_avail_ovr 1
Sorry for the late posting. I've been finding mbn files for other carriers but it seems there's no specific carrier's mbn files available on Snapdragon 888 (or I haven't found one). I'll update if there's any progress.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IMS Status when Wifi is disconnected and connected.
Additional link: Buy me a coffee : )
Interested in the progress of this...if I can get WiFi Calling i would prefer that over LTE calling for when I go to my Sister's Ranch where there's no signal what so ever...
I'm very interested in this, I've been looking for a way to get TMO Wi-Fi calling working on this phone for a while now.
My phone just died today. I’m not sure if the mbn file caused that. I won’t post the guide until I figure it out :-(
Forbesii said:
My phone just died today. I’m not sure if the mbn file caused that. I won’t post the guide until I figure it out :-(
Click to expand...
Click to collapse
Damn fam, hope it works out...i just cross flashed to the US rom from SEA cause I'm on Metro PCS but my modem got ****ed.....so no calling and network is constantly disconnecting
I have the SEA version in the US on T-Mobile. I flashed Ponce's Pixel Experienc GSI and Sony's binaries (no idea if this was necessary) and I have VoLTE and VoWiFi.
thatguy222 said:
I have the SEA version in the US on T-Mobile. I flashed Ponce's Pixel Experienc GSI and Sony's binaries (no idea if this was necessary) and I have VoLTE and VoWiFi.
Click to expand...
Click to collapse
Hmmm I will flash the binaries and see what happens if nothing changes I'll have to get back to Sea
thatguy222 said:
I have the SEA version in the US on T-Mobile. I flashed Ponce's Pixel Experienc GSI and Sony's binaries (no idea if this was necessary) and I have VoLTE and VoWiFi.
Click to expand...
Click to collapse
how did you flash the Binaries?
Delete
Ainz_Ooal_Gown said:
how did you flash the Binaries?
Click to expand...
Click to collapse
fastboot flash oem filename.img
Ainz_Ooal_Gown said:
Hmmm I will flash the binaries and see what happens if nothing changes I'll have to get back to Sea
Click to expand...
Click to collapse
Where might one get these binaries from?
@Forbesii Thanks for starting this thread. I am struggling with the same for my Xperia 5 III. Really Really looking forward to your Complete step-by-step guide and see how I can do this for my xperia as well. Thanks in advance.
Ndlelex said:
Where might one get these binaries from?
Click to expand...
Click to collapse
Sony's website
The guide is done guys. I'm still looking for methods to get mbn files not in the sony firmware.
Thanks for the update on the guide. I believe step 5 is missing a part. The mcfg_autoselect_by_uim file is not in the EFSTools download on Github.
misquia said:
Thanks for the update on the guide. I believe step 5 is missing a part. The mcfg_autoselect_by_uim file is not in the EFSTools download on Github.
Click to expand...
Click to collapse
Yes. I am stuck on the same step. It is returning the below error:
Critical error. Could not find file 'E:\Sony Xperia 5 III\EfsTools-0.14\mcfg_autoselect_by_uim'.
@Forbesii Could you please help/guide on this?
Ignored this step and it still works. The VoLTE and VoWifi both are working now (for Reliance Jio network in India). AMAZING article!
Definitely save it for future.
@Forbesii - On a side note: I am trying to add Airtel mbn (India carrier) file to my Xperia 5 III but it simply doesn't work. Neither VoLTE nor VoWifi. Are there any secondary steps/different command to copy this for SIM 2?
misquia said:
Thanks for the update on the guide. I believe step 5 is missing a part. The mcfg_autoselect_by_uim file is not in the EFSTools download on Github.
Click to expand...
Click to collapse
Thanks for your report, I‘ll update.
anmolkakkar said:
Ignored this step and it still works. The VoLTE and VoWifi both are working now (for Reliance Jio network in India). AMAZING article!
Definitely save it for future.
@Forbesii - On a side note: I am trying to add Airtel mbn (India carrier) file to my Xperia 5 III but it simply doesn't work. Neither VoLTE nor VoWifi. Are there any secondary steps/different command to copy this for SIM 2?
Click to expand...
Click to collapse
I haven’t tested on SIM 2. The second sim at least on Xperia 1 III is not correctly recognized by EFSTools. I might check other methods for the second SIM slot.
Thanks. Will wait to hear back from you.