Hi!
First off let me say thanks to R_a_z_v_a_n for redirecting me and hope that I'll find my answer here ^^
So I Have this device called HP 7 VoiceTab 1321RA (not with Slate just HP 7 Voicetab), wanting to have a custom recovery then I tried to flash a CWM Custom Recovery for HP Slate 7 VoiceTab because I thought it was the same and ends up bricking my phone. It ends up in a bootloop which only shows HP sign for a few seconds and dead. But I managed to find out that I can access the recovery menu (or so I thought it is), but the options was choosing between Fastboot Mode, Normal Boot, Recovery Mode, and VART Mode.
I tried to enter Fastboot Mode before and tried to access it via PC but somehow I can't find the device by entering adb devices and fastboot devices. Anyways, I have downloaded a stock update.zip for it but not the original KitKat one which I get from the first time I bought it but rather the JB ones. I think by flashing this would help me recover the device but the only problem is I don't know which method should I use to Flash it. Since I don't have the Stock Recovery or ANY kind of recovery at all, I guess I'm stuck. And it won't start to the home page so I can't set the USB debugging options. Please guide me through this >.<
Thanks a lot!
Been fighting with it for 2 days now and still no result came.
So here's the update so far....
I tried on my other device in order to understand how my PC reads ADB and now I kinda gets it. But the problem is now can't get the device to enable USB Debugging because I can't access options at all.
Secondly, since I left it on for the night because charging seems to trigger the bootloop too, now I can't access the fastboot mode like I was last night. And it constantly repeating this sequence: [battery scene with the "charging battery" symbol] > [HP Powered by Android screen] repeated for 2-3 times > [low battery need charging screen] > repeat. And once I tried to connect to the PC, it goes to the same sequence too. When I tried to access the boot options (the screen which displays Fastboot Mode, Normal Boot, Recovery Mode, and UART Mode which I mention in Thread Starting post), it shows the low battery need charging scene and then repeating the same sequence as mentioned above.
I seem to figure out how to fix this but I still can't manage to access the fastboot mode yet. Will give update once I can try to.
Anyone can help me on this?
Thanks a lot!
Update!
Somehow with a little tweaking and stripping the device, I managed to solve the charging problems. Will update on this once my problem finished.
Jump out from the frying pan and into the fire so they say, I ran into another problem. Finally managed to get into fastboot mode, the devices manager reads it as an Android Device>ROMaster ADB device like the other device I tried to connect while in ADB mode and fastboot mode, but somehow CMD cannot read the device as an ADB device or a Fastboot device like the other device did. I tried to uninstall and reinstall the driver and still nothing happens. I tried to find the usb_driver on the internet and it directs me to the update.zip instead. Trying to update the driver via Computer Management but it says the driver is up to date. Now thinking about making an emulator device based on the HP 7 VoiceTab 1321RA but I really have no idea how to make one. Any one have any idea of what should I do next or can guide me through this? At least until the CMD can read the fastboot.
Thanks a lot!
I found my self in a deadlock!
PLEASE HELP :crying:
Could you unbrick yours
What service centre says about that problem i also ran in this problrm but i m trying to go to service centre for that
first off install drivers in your PC as admin
then use the official flashtool to flash ur stock firmware by entering fastboot or flashmode simple as that
@Sunderesh, thanks for the suggestion, however, couldnt get any official flashtool for hp voicetab. Can you suggest one please?
jithinraj said:
@Sunderesh, thanks for the suggestion, however, couldnt get any official flashtool for hp voicetab. Can you suggest one please?
Click to expand...
Click to collapse
Dude urs is a mtk device so sp flash tool should do the trick.... Just don't forget to install correct drivers....run both drivers and flash tool as admin..... Tell me when it's solved k
jithinraj said:
@Sunderesh, thanks for the suggestion, however, couldnt get any official flashtool for hp voicetab. Can you suggest one please?
Click to expand...
Click to collapse
That is what im trying. To tell you urs is a mediatek device the official flashtool is sp flashtool
rikicchi said:
Update!
Somehow with a little tweaking and stripping the device, I managed to solve the charging problems. Will update on this once my problem finished.
Jump out from the frying pan and into the fire so they say, I ran into another problem. Finally managed to get into fastboot mode, the devices manager reads it as an Android Device>ROMaster ADB device like the other device I tried to connect while in ADB mode and fastboot mode, but somehow CMD cannot read the device as an ADB device or a Fastboot device like the other device did. I tried to uninstall and reinstall the driver and still nothing happens. I tried to find the usb_driver on the internet and it directs me to the update.zip instead. Trying to update the driver via Computer Management but it says the driver is up to date. Now thinking about making an emulator device based on the HP 7 VoiceTab 1321RA but I really have no idea how to make one. Any one have any idea of what should I do next or can guide me through this? At least until the CMD can read the fastboot.
Thanks a lot!
Click to expand...
Click to collapse
try to push the update.zip via adb sideload (Choose "update via ADB sideload" on recovery mode)using adb terminal on PC,as long as your tab can access the recovery mode.remember to backup all your data before u do it.
have a try it's 100% work on me
where I can download update.zip file? anyone can help?
rikicchi said:
Update!
Somehow with a little tweaking and stripping the device, I managed to solve the charging problems. Will update on this once my problem finished.
Jump out from the frying pan and into the fire so they say, I ran into another problem. Finally managed to get into fastboot mode, the devices manager reads it as an Android Device>ROMaster ADB device like the other device I tried to connect while in ADB mode and fastboot mode, but somehow CMD cannot read the device as an ADB device or a Fastboot device like the other device did. I tried to uninstall and reinstall the driver and still nothing happens. I tried to find the usb_driver on the internet and it directs me to the update.zip instead. Trying to update the driver via Computer Management but it says the driver is up to date. Now thinking about making an emulator device based on the HP 7 VoiceTab 1321RA but I really have no idea how to make one. Any one have any idea of what should I do next or can guide me through this? At least until the CMD can read the fastboot.
Thanks a lot!
Click to expand...
Click to collapse
can you explain how did you managed to charge the device??? please its a request......jst help me out :crying::crying:
Related
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
tawhid111 said:
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script to get into fastboot at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
Click to expand...
Click to collapse
So you solve it! :good:
:/
tawhid111 said:
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
Click to expand...
Click to collapse
Still unable to do it, when I plug the cable holding vol+ it just reboot normally :/
foreverman said:
Still unable to do it, when I plug the cable holding vol+ it just reboot normally :/
Click to expand...
Click to collapse
Then try enter in lelus fastboot mode, ad then flash x-loader, uloader, boot.img and recovery.img from stock rom for your device type model. Then repeat steps 1 and 2
Where can I find the lelus script?
Sent from my Note II
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
ciccillover said:
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
Click to expand...
Click to collapse
Then you need a Technician with a Octopus Box to repair your partition table...
ciccillover said:
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
Click to expand...
Click to collapse
Can you boot into recovery? We now have a custom recovery for locked bootloaders (and CM roms). If you can get into recovery, I would try some adb commands to mount the partitions.
No, no recovery. Just to make sure that I'm not doing it wrong, what is the key combination to boot to recovery?
I have also tried:
Code:
fastboot boot some_recovery_image.img
It says ok, but the phone just hangs at the black screen and becomes undetectable as a fastboot device, until I pull the battery. So, unless the some_recovery_image.img is unsuitable for my P760 (which may be!), there is something seriously wrong I think.
Or maybe I can try the same command with the custom recovery for bootloader locked phones... Where can I find it?
ciccillover said:
No, no recovery. Just to make sure that I'm not doing it wrong, what is the key combination to boot to recovery?
I have also tried:
Code:
fastboot boot some_recovery_image.img
It says ok, but the phone just hangs at the black screen and becomes undetectable as a fastboot device, until I pull the battery. So, unless the some_recovery_image.img is unsuitable for my P760 (which may be!), there is something seriously wrong I think.
Or maybe I can try the same command with the custom recovery for bootloader locked phones... Where can I find it?
Click to expand...
Click to collapse
Your EMMC partition is wiped or fried... you really need a JTAG service or a Box like octopus because your L9 is Hard-bricked...
Thanks for your opinion. Yet, I still want to hear from others.
I'm running into more and more problems with the L9 as their me grows.
-Fastboot doesn't work under Windows 8.1 and 10, but under the now obsolete(for me) Windows 7, unlike my other devices, which are fine with Win 10.
-ADB seems to work, but requiring the device to be still able to boot.
-I always boot to recovery from within Android as long as the L9 ain't bricked. After a failed rom install, during which the sd card failed(could no longer write or be formatted afterwards, the last time stamps of files and folders were set during the failed install) I discovered a problem with TWRP(Artas182x's and Edwin's), which may have been present since a long time: Trying to invoke TWRP via keypress will brick the device!
So, if my P760 no longer boots, there's only download mode available, sort of the final line of defense.
-There's sort of a trick if even download mode fails: After a failed attempt unplug phone, force switch-off, if the phone is in brick state. Then switch on, force switch-off again, and only then attempt download mode again. And have patience while holding down the vol button, it might take up to 20 seconds for the phone to switch itself on into download mode. (A single forced powerdown will cause Fastboot NOT to work the next time)
But I'm absolutely clueless about the recovery issue, for now TWRP is semi-working, can only be accessed via Android, as long as the phone is fully working.
W/o Fastboot, I now have flashed stock rom several times and rooted it with Kingo rooter just to be able to run Flashify to install TWRP. If Flashify is the culprit for the TWRP issues, I could need a recommendation for a better working app.
ciccillover said:
Thanks for your opinion. Yet, I still want to hear from others.
Click to expand...
Click to collapse
Tried OMAP flasher ? It needs memory configuration file in order to work with our device
No, I didn't. I have sold the phone for spares.
Inviato dal mio LG-D855 utilizzando Tapatalk
I never needed the OMAP drivers and tools. As they are ancient, they will probably make even more problems with newer Windows versions.
I could by no means invoke Fastboot on this device with Windows 8.1 and 10, Seven worked. So you had to go for Download Mode instead to recover to stock rom, then root with the Kingo tool, then install TWRP via Rashr or Flashify, the most time consuming way to recover from the frequent bricks.
And the LG Flash Tool 2014 always needed several attempts to get the job done. The latest official recovery tool from LG works in D/L Mode, but will always download the rom image anew.
sry for asking this now since 7 years iam brick free but now i think it is ...
i have root it and installed the kernel from hear so now it runs really great a long time but yesterday i get an notify for an u.date
i click on yes and and then because it doesnt start again i wi-cache and reboot soo now iam in trouble no driver no com. regognize my watch as an watch just a unknown device.
i came into downlaod mod fastboot and into recovery but when i start it stucks hours in the boot sequenz
i cant run any adb because i didnt found a adb device ... than i think the real trouble came with that that i make an factory reset ... so for all here i try out all in flash tool all is ready but when the watch goes into download mode the com. write me a unknown device in that case the flashtool found no watch and the watch rebooting...
and jet its on you all to answer me why i cant get it back to life ..##
thx and a nice evenning
ashvarkul92 said:
sry for asking this now since 7 years iam brick free but now i think it is ...
i have root it and installed the kernel from hear so now it runs really great a long time but yesterday i get an notify for an u.date
i click on yes and and then because it doesnt start again i wi-cache and reboot soo now iam in trouble no driver no com. regognize my watch as an watch just a unknown device.
i came into downlaod mod fastboot and into recovery but when i start it stucks hours in the boot sequenz
i cant run any adb because i didnt found a adb device ... than i think the real trouble came with that that i make an factory reset ... so for all here i try out all in flash tool all is ready but when the watch goes into download mode the com. write me a unknown device in that case the flashtool found no watch and the watch rebooting...
and jet its on you all to answer me why i cant get it back to life ..##
thx and a nice evenning
Click to expand...
Click to collapse
Make sure you have the Universal ADB Drivers installed, open device manager and select the unknown device that matches your watch in fastboot mode. Choose to browse from a list of drivers and the hit Have Disk, browse to the Universal ADB Driver location in Program Files and then from the list that appears after selecting OK, choose LG Android Interface (or similar) and press Next. It should install the driver and you should be able to flash back. The reason that you bricked was because you did a factory reset on the Arter kernel which seems to expect (I may be wrong here..) all filesystems to be F2FS (which it converts to when it installs, a factory reset wipes the partition back to it's stock format it seems), as I soft-bricked after factory resetting on the Arter kernel as well. Hope this helps.
ShadowEO said:
Make sure you have the Universal ADB Drivers installed, open device manager and select the unknown device that matches your watch in fastboot mode. Choose to browse from a list of drivers and the hit Have Disk, browse to the Universal ADB Driver location in Program Files and then from the list that appears after selecting OK, choose LG Android Interface (or similar) and press Next. It should install the driver and you should be able to flash back. The reason that you bricked was because you did a factory reset on the Arter kernel which seems to expect (I may be wrong here..) all filesystems to be F2FS (which it converts to when it installs, a factory reset wipes the partition back to it's stock format it seems), as I soft-bricked after factory resetting on the Arter kernel as well. Hope this helps.
Click to expand...
Click to collapse
How would you recovery after reinstalling the adb drivers? I'm in a similar situation right now with the custom kernel.
After installing the driver, you should be able to use the LG G Watch Restore Tools package on these forums to reflash the system and boot partitions. That will replace your kernel with the stock one.
ShadowEO said:
After installing the driver, you should be able to use the LG G Watch Restore Tools package on these forums to reflash the system and boot partitions. That will replace your kernel with the stock one.
Click to expand...
Click to collapse
No iam not .. i tried all out no device in fastboot no device in adb and in linux there are no drivers you need .. i think that the preloader is damaged ... i find nothing so that is sure an soft brick but no one can handle it for now ..
If you can get into Fastboot, then there is something wrong with your USB cable or your pins. Fastboot itself should appear, maybe as an unknown device that appears and disappears when you connect and disconnect. Clean your pins, try another cable and check device manager to make sure you don't have an Unknown Device sitting in there.
I was upgrading the current Stock rom on my ZTE Nubia Z5s Mini, I went through the recovery mode to load the new rom and got a message saying that the rom installed correctly, I rebooted the device and now its stuck at the MIUI logo or if I try to load the recovery mode I get the Nubia logo just to load back to the miui logo again. I got the rom from the MIUI site its v5.
I've left the phone for over an hour hoping it was just loading up but no change, the phone heats up and even has a charger screen when plugged in.
Anyway to get back into the recovery mode to load the original rom again or any other way of fixing this? help :crying:
I've no idea how to help you with this but I'm bumping the thread because I know how you feel.
Sent from my HUAWEI Y536A1
I'm trying to flush the rom by using adb but with an issue, even thou my device is recognized as Nubia Z5s Mini in device manager it still gives a driver error "these have been installed" and in cmd adb it does not see the device.
Update : Got drivers for install from Clockwordmod website but it will only accept the drivers if I set the phone as a modem in device manager when installing them, still not recognized by adb using CMD.
Solved driver issue and qusb_download issue, ADB drivers are done through all drives in device manager pointing to the Google USB drivers and select adb interface then run CMD from within the Google SDK program folder in platform-tools to read the device.
Now using emmc but need to generate EMMCBLD.HEX & 7x30_msimage.mbn if anyone can help, I can enter adb using recovery mode but blocked from making changes in fastboot mode, currently in download mode which can see a drive H but need the two files to proceed any further.
`Dear Admin,
Hi my Name is Zaki.... i am using HTC Rezound which i purchased in U.A.E
After installing whatsapp i got continious restart problem so i downloaded stock firmware of ICS version. all was good but by mistake i clear internal storage in fastboot mode. and after that i am unable to get into TWRP Recovery mode, it is showing phone with with arrow circle and after few second it converted into phone with triangle (attached screens 2 and 3) please explain me with links how to get TWRP again. and the links for TWRP versions i am not sure which is ok.
Please Reply.
syedzakiabidi said:
`Dear Admin,
Hi my Name is Zaki.... i am using HTC Rezound which i purchased in U.A.E
After installing whatsapp i got continious restart problem so i downloaded stock firmware of ICS version. all was good but by mistake i clear internal storage in fastboot mode. and after that i am unable to get into TWRP Recovery mode, it is showing phone with with arrow circle and after few second it converted into phone with triangle (attached screens 2 and 3) please explain me with links how to get TWRP again. and the links for TWRP versions i am not sure which is ok.
Please Reply.
Click to expand...
Click to collapse
You can't access TWRP because you over-wrote it with the factory RUU firmware image, it isn't there anymore...
Download TWRP image from TWRP official site at https://dl.twrp.me/vigor/ or Flyhalf's build at http://forum.xda-developers.com/showthread.php?t=1902381
Either one is good... then start fastboot, connect usb and flash recovery with the command:
fastboot flash recovery <path/filename of TWRP IMG file>
give it a minute or so, reboot into Hboot and start TWRP.
im having a similar issue but my computer always says waiting for device in command prompt. I have all the drivers installed and the phone says "usb fastboot" or "fastboot usb" (cant recall what order those 2 words are in LoL)
youdoofus said:
im having a similar issue but my computer always says waiting for device in command prompt. I have all the drivers installed and the phone says "usb fastboot" or "fastboot usb" (cant recall what order those 2 words are in LoL)
Click to expand...
Click to collapse
You probably have a driver issue then... Install HTC Sync, connect the phone, then disconnect it, remove HTC Sync and it should work. If that doesn't work, try a different USB port.
Honestly, I switched to Linux a long time ago... I don't have driver issues. If you were running Linux, even a live or USB key distro, you would access it easily.
acejavelin said:
You probably have a driver issue then... Install HTC Sync, connect the phone, then disconnect it, remove HTC Sync and it should work. If that doesn't work, try a different USB port.
Honestly, I switched to Linux a long time ago... I don't have driver issues. If you were running Linux, even a live or USB key distro, you would access it easily.
Click to expand...
Click to collapse
fair point, and i do have ubuntu (of differing flavor dates) on 3 of my machines, so i might just do that. Thanks!! Ill also try the goofy htcsynch (which i forgot about, as im a Sammy guy now) Thanks again!!
Generic Disclaimer: By doing any of the process listed below you accept complete responsibility over any of your actions, I will not be responsible if you end up causing hard brick, data loss or any kind of loss to your personal property.
Hii XDA fellows,
So I have seen many people asking for noob friendly guide to restore original oxygen os firmware or basically unbrick device. There are several thread on this already but trust me I have tried them all and in my case I had to use my own brain. So I have compiled a noob friendly guide which I,myself have used to unbrick my device.
small warning this will wipe all of your data.
Firstly I wants to thank Some_Random_Username for bringing up MSM Unbrick tool for OnePlus Nord. His guide to unrick nord is also fairly good enough but in my case I was stuck in bootloop after installing a rom. My phone was not even booting to Qualcomm EDL Mode so that I can use MSM Tool.
Lets start with pre-requisites:
You must have unlocked bootloader.
Original Oneplus Type - C cable.
Windows PC.
ADB debugging turned on your phone.
Firstly Switch off your device, which I think most of you have already have as the device is bricked but in case your phone is stuck in bootloop or recovery or bootloader menu itself then try holding down voume up button and power button together hold them down till you get heptic feedback and screen goes off. Let it be cool down for about a minute.
Now Setup your PC:
Download MSM tool to from this guide : Click here
Setup adb environment in your PC if you havent already setup follow this guide
Download Qualcomm EDL drivers from here: Click here
Now download Unofficial TWRP recovery by Mauronofrio from here
On your PC right click on start menu icon and start Windows Powershell(Admin) and type this command bcdedit /set testsigning on This will turn off driver signature verifications on windows you will be required to restart your pc now after you restart your pc will boot into test mode and you'll see a watermark stating the same in bottom left of your desktop. Worry not we will undo this after we have finished restoring.
install Qualcomm EDL drivers by running the setup listed above.
Unzip MSMTool there you will see a file named MsmDownloadTool V4.0.exe run it, it'll take some time but after you see a pop up asking for user type user name and password, Select other as user type and leave other stuffs blank as it is and click next.
In the next window, In the target button select O2 while using global tool or India while using indian tool or EU when using european tool.
Now you have to boot into Qualcomm Emergency Download Mode
You can do this in several diffrent ways but one I am listing here is recommended :
Boot into fastboot/bootloader mode by pressing and holding Volume up, Volume down and power button together when you see a Menu pop up on your screen you can let go all the fingers at once.
Now connect your phone to your PC and go to that folder where TWRP recovery is located. Hold Shift button and Right click inside that folder you'll see an option "Open powershell window here click on it. In the powershell window type
fastboot devices and press enter your device will be listed as fastboot devices in powershell window. Now type
fastboot boot twrp1.img press enter
your device will boot up in TWRP recovery in twrp recovery go to reboot section and select Edl, This will boot your phone Edl mode your screen will go off as soon as it happens in the MSM tool window you'll see a device listed as com3/com5/com7.
Click on start button the restoration process will begin. Wait for about 400 secs and your device will automatically boot up.
Voila you've successfully unbricked your phone.
If you want to exit from Driver test mode on your pc simply start a powershell window with admin rights and type
bcdedit /set testsigning off
and restart your PC.
So first off all i want to say thanks for this guide.
So , i have a problem with my phone getting reconized by my pcs, so, my Phone just works fine but i want to restore it to stock, i'm using aospex 8.3.
Since a few days my phone dosnt get reconzied by my pc, i've tried windows and linux, both installations cant find my phone, i tried diffrent pc's,usb cables, driver, new installations of windows and linux mint, other phones dont have this problem, tried resetting , everything, do you have a idea what i could try or could it be just my phone port thats damaged and cant transfer data anymore, if anyone has an idea i would really be happy about an answer , thanks!
peppanzer said:
So first off all i want to say thanks for this guide.
So , i have a problem with my phone getting reconized by my pcs, so, my Phone just works fine but i want to restore it to stock, i'm using aospex 8.3.
Since a few days my phone dosnt get reconzied by my pc, i've tried windows and linux, both installations cant find my phone, i tried diffrent pc's,usb cables, driver, new installations of windows and linux mint, other phones dont have this problem, tried resetting , everything, do you have a idea what i could try or could it be just my phone port thats damaged and cant transfer data anymore, if anyone has an idea i would really be happy about an answer , thank
Click to expand...
Click to collapse
Seems like it's a software issue probably a bug in your rom rich out to the developer he might help you, as you have tried both with Linux and windows i don't think it's a driver issue, it could be an issue with the hardware also but chances are pretty low for this to happen. Try flashing other roms if you have backup of your phone, use orange fox recovery it has an option of taking nandroid backup.
IamAlok said:
Seems like it's a software issue probably a bug in your rom rich out to the developer he might help you, as you have tried both with Linux and windows i don't think it's a driver issue, it could be an issue with the hardware also but chances are pretty low for this to happen. Try flashing other roms if you have backup of your phone, use orange fox recovery it has an option of taking nandroid backup.
Click to expand...
Click to collapse
the thing is that i cant flash other roms, my phone dosn't gets recognized in fastboot, recovery and edl, so with the aex recovery installed i have no chance to change the rom without a pc, reached out to the dev but seems i'm the only person with the proplem, but thanks for helping.