I am rooted and S-Off. I am using the ViperOne custom ROM for my phone.
The end goal is for me to update my firmware, because my phone has an over 10 minutes boot time normally. (Not an exaggeration. I have actually timed it with a timer.) I read that in order to fix this, I should try to update the firmware by going to stock recovery and doing an OTA update.
My TWRP has worked flawlessly for me over the years, but for some reason it won't work anymore. It will hang on the boot screen for over an hour. After that hour, I assumed it's not slowly booting. (As a bit of background, recovery would boot quickly while my phone still had problems with 10 minute boot times).
Another piece of information is that the last time TWRP worked was when I used it to install .zip files from Titanium to get all my apps working. That worked perfectly fine, my apps got updated, and no trouble. I wish I could say what happened between then and now, but from what I can remember, I just used my phone normally, such as using web browsers and games. I don't remember messing with any system files.
I do know that ClockWorkMod recovery DOES work if I flash that, but my nandroids are all on TWRP. I have tried to flash different version of TWRP as well. It doesn't seem to matter which one I flash, my phone reacts exactly the same.
Another thing to note, I'm not sure if it's significant or not, is that when I got into hboot, I get the following message for a split second. I can't read the file names exactly, but I got the extensions. Then I get the normal screen with the vol instructions and choices to go to fastboot, recovery, etc... The message reads:
SD Checking...
Loading [(something).zip]
No Image!
Loading [(something).nbh]
No Image or wrong image!
Loading [(something).zip]
Loading [(something).nbh]
No Image or wrong image!
I hope this is a decent amount of information. I tried to include as much as I could, but if I'm missing any critical details, let me know and I will GREATLY appreciate your help!
have u tried to rewrite the image, download the new TWRP and load it via adb
Bradl79 said:
have u tried to rewrite the image, download the new TWRP and load it via adb
Click to expand...
Click to collapse
Well, I did do that. I rewrote different versions of the image and none worked.
Sadly, my solution was to completely wipe my phone. More than the default factory reset.
I'm so it has been solved, but probably not in the most practical way for others with a similar problem.
Battletooth said:
Well, I did do that. I rewrote different versions of the image and none worked.
Sadly, my solution was to completely wipe my phone. More than the default factory reset.
I'm so it has been solved, but probably not in the most practical way for others with a similar problem.
Click to expand...
Click to collapse
Having the exact same issue. Attempted to install twrp-2.8.6.0-m8.img using adb, but TWRP never loads. I can load prior versions but same results. Going to HBOOT I get a bunch of messages related to 0P6BDIAG.zip, 0P6BIMG.zip
and some .nbh. I think it's looking on my SDCARD for those.
If you're looking to update your firmware, you can use an official RUU to change the firmware of your phone. You can read more about it in this stickied thread in the general forum to see if it fits your needs. If you decide to do this, your phone will be completely stock after the RUU finishes running so use fastboot to flash TWRP (or whichever recovery you prefer).
Regarding the messages you see in hboot, it will always check for those files if you have an external sdcard mounted. If they are present, you will be given the option to flash the update. If not, you will get regular hboot access after the check. It is completely normal and nothing to worry about.
Related
Tuesday night I loaded CM7, and then the Market wouldn't update my apps so I decided I would restore BAMF 1.5. After doing so, the Market just gave me "Fails" trying to update, and I could not access recovery, as I was going to do a complete wipe and reflash. Most of Wednesday, an extremely helpful & knowledgable member, Mattgyver83, tried diligently to help me rectify the situation, but to no avail. We tried to Fastboot, tried flash_image, tried fix permissions...shoot, I practically wore out adb..anyway, I ended up reverting back to stock and unrooted. I used jcase's method to revert back to stock, and that was painless, and successful. I decided last night to try rooting again, thinking a fresh root would solve my issue of not being able to access recovery. Root was successful, but I still cannot access recovery, through rom manager, or through bootloader. When I attempt it my Tbolt goes to white HTC screen, and stays there. All functions of my phone now work, and all aspects of root work, except I cannot flash anything. Rom manager shows I have clockwork recovery, but I just can't get to it.
Sorry for the long ramble. If anyone has had this issue, or if anyone knows a fix, I would appreciate it. Otherwise, I wait for Gingerbread.
Thanks
Happened to me with CM7 builds. For some reason they were erasing the recovery. Just have to reflash the recovery in Rom Manager and you'll be all set in the future.
do what i do pull batt leave out for a min, then put the batt back in and connect usb right away.
travishamockery said:
Happened to me with CM7 builds. For some reason they were erasing the recovery. Just have to reflash the recovery in Rom Manager and you'll be all set in the future.
Click to expand...
Click to collapse
Tried that, but thanks. Still just goes to white HTC screen, and stays there until I do battery pull.
jr4000watts said:
do what i do pull batt leave out for a min, then put the batt back in and connect usb right away.
Click to expand...
Click to collapse
I can get to bootloader, just not able to get into recovery.
I'm stabbing in the dark at this, but this did work for me with my Droid...
I had a similar issue with my Droid. Someone recommended that I flash recovery multiple times before trying to reboot. The comments were basically that you need to flash recovery 3-5x until the flashing process is a mere few short seconds. Evidently that is an indication that the flash has occurred correctly.
Ie. Flash recovery and wait until the confirmation pop-up/message only takes a few seconds to pop up. If the message takes longer than 5 seconds or so, re-flash recovery and repeat until the confirmation comes up quickly.
This sounded retarded to me, but I was at the end of my rope so I tried it. It worked like a charm.
M.
monolithic said:
I'm stabbing in the dark at this, but this did work for me with my Droid...
I had a similar issue with my Droid. Someone recommended that I flash recovery multiple times before trying to reboot. The comments were basically that you need to flash recovery 3-5x until the flashing process is a mere few short seconds. Evidently that is an indication that the flash has occurred correctly.
Ie. Flash recovery and wait until the confirmation pop-up/message only takes a few seconds to pop up. If the message takes longer than 5 seconds or so, re-flash recovery and repeat until the confirmation comes up quickly.
This sounded retarded to me, but I was at the end of my rope so I tried it. It worked like a charm.
M.
Click to expand...
Click to collapse
Thanks, but that didn't work. I think something in my os got lost when I restored BAMF from CM7.
Yea I spent a good few hours yesterday trying to help Orio out and we attempted a ton of things to try and fix the recovery issue, this post should offer a bit more insight to the methods used, this is running off memory;
adb reboot recovery failed
Reinstall latest Rom Manager apk and Flash CWM
flash latest rom manager via fastboot (CWM only)
(fastboot flash recovery /sdcard/recovery-clockwork-3.0.2.5.img)
**did not do fastboot erase recovery first**
"return to stock safely and properly" XDAthread by jcase
return to stock image [RUU], reroot, try again
try to boot into recovery via hboot
manually installed fix_permissions.sh script and busybox on rooted stock, ran.. didnt fix
tried to see if flash_image method would work, didn't
All of the above have failed and we basically tried almost all combinations. Not once would this phone get back into recovery, even after flashing the appropriate RUUs which include either stock android or CWM recovery. The only thing we have not currently attempted which might be the last thing left is to do is manually install the nandroid.sh script and do an advanced restore of the recovery image only from a nandroid backup on SD. I would rather not go down this method as it could have an undesired result, I have done it to restore a G1 back in the day but not 100% if its gonna work on a tbolt. Thankfully his phone boots, and we can get into hboot, but yea.. pretend recovery just doesnt exist at all...
Curious if anyone has any knowledge above what we have already tried.
monolithic said:
I had a similar issue with my Droid. Someone recommended that I flash recovery multiple times before trying to reboot. The comments were basically that you need to flash recovery 3-5x until the flashing process is a mere few short seconds. Evidently that is an indication that the flash has occurred correctly.
Click to expand...
Click to collapse
I recall the same thing and its a good thought however that was mostly a generic error due to a CWM update and CM6 (I think) but either way flashing an RUU should override this shortcoming and im pretty sure that issue was worked out in CWM as well.
Not to be rude, but I don't think this question belongs in the development section.
Orio56 said:
I can get to bootloader, just not able to get into recovery.
Click to expand...
Click to collapse
do you still have the P zip file for the radio (baseband) on your SD card? if you do....try to delete it...then hold power and volume down button down....then see if you can get into recovery....
probably not going to work...but it is worth a try......
hogowner said:
do you still have the P zip file for the radio (baseband) on your SD card? if you do....try to delete it...then hold power and volume down button down....then see if you can get into recovery....
probably not going to work...but it is worth a try......
Click to expand...
Click to collapse
Thanks, but no, I deleted that after loading it. I actually reverted back to stock/unrooted last night and rerooted and the problem still remains. It's quite strange.
maybe i missed it if someone suggested this but what about flashing an older version of CWM?
shelooga said:
maybe i missed it if someone suggested this but what about flashing an older version of CWM?
Click to expand...
Click to collapse
That is what I was going to suggest. In ROM Manager at the very bottom try and flash an older version.
Sent from my ADR6400L using XDA Premium App
SUCCESS !!!
I fixed it !
Apparently, when I loaded up cm7, files showed up about the same time on my sdcard in clockworkmod download file. I deleted those files, and reflashed clockworkmod in rom manager, (which this time took like 3 - 4 minutes), and rebooted into recovery and it worked...did it again, just in case it was a fluke and it worked.
All is well now...the planets are realigned !!!
Thanks everyone for your ideas and especially thanks to mattgyver83 who helped me for something like 4 hours yesterday. Exceptional kindness !!
mods...you can close this thread.
GREAT NEWS!!!! CONGRATULATIONS!!
THANKS FOR REPORTING BACK!
This may help out other members with the same problem!!
now go ahead and start playing with your T-BOLT again!
That's a very odd solution. My first two things to try would have been:
1) fastboot:
fastboot erase recovery
fastboot flash recovery C:\some\local\path\recovery.img
You can't, well, probably shouldn't, flash a recovery from the /sdcard. When in fastboot mode I don't think the sdcard is even mounted. Either way, I think fastboot needs the img file on the local file system.
2) Create a PG05IMG.zip file with the recovery.img file in it, and flash that through HBOOT. Although this should have been done in some form or fashion when you downgraded or re-rooted, so YMMV.
Ok so here's the deal...
I was running ViperRez ROM and decided it was time for a change and found a few ROMs I wanted to check out. Tried EclipticRez, kept force closing and rebooting before or just after I could finish the phone set up. Tried Nils Business, no luck. So finally tried to load MIUI for ICS and ran into trouble.
Each time before loading these ROMs I used Clean Wipe to wipe before loading the ROM. I am S-on. Unlocked. HBOOT- 2.11
So here's where my trouble is... Normally when a ROM fails to work, I'd simply reboot into recovery, wipe, and load a different rom via zip from SD card. The problem I'm having, besides the ROM not loading and getting stuck on the HTC flash screen is, I cant get into recovery. I can reboot into the bootloader screen, get to fastboot. When I try to select recovery the phone goes black, flashes something quickly on the lower part of the screen with CWM recovery looking logo, then reboots and sticks on the HTC white screen. Another issue, my battery will no longer charge via phone charger, so I had to go out and buy a battery charger today to even get my phone running again since all this drained the battery.
I've flashed the PH98IMG, removed it since it was causing me to constantly reflash it and reboot. Removed the boot img from the MIUI ROM and placed it in the root of my SD card, seemed to do nothing. I've also tried to use abd, although I'm not really sure how to use it, basically tried to follow a few different threads, but when I typed adb devices, the list was always blank.
Can anyone help me to either get this MIUI ROM working or at least get me back into recovery so I can re-load ViperRez that I know was working? I am no expert, so please give detailed instructions if you can. Thanks in advance.
ronin_rone said:
Ok so here's the deal...
I was running ViperRez ROM and decided it was time for a change and found a few ROMs I wanted to check out. Tried EclipticRez, kept force closing and rebooting before or just after I could finish the phone set up. Tried Nils Business, no luck. So finally tried to load MIUI for ICS and ran into trouble.
Each time before loading these ROMs I used Clean Wipe to wipe before loading the ROM. I am S-on. Unlocked. HBOOT- 2.11
So here's where my trouble is... Normally when a ROM fails to work, I'd simply reboot into recovery, wipe, and load a different rom via zip from SD card. The problem I'm having, besides the ROM not loading and getting stuck on the HTC flash screen is, I cant get into recovery. I can reboot into the bootloader screen, get to fastboot. When I try to select recovery the phone goes black, flashes something quickly on the lower part of the screen with CWM recovery looking logo, then reboots and sticks on the HTC white screen. Another issue, my battery will no longer charge via phone charger, so I had to go out and buy a battery charger today to even get my phone running again since all this drained the battery.
I've flashed the PH98IMG, removed it since it was causing me to constantly reflash it and reboot. Removed the boot img from the MIUI ROM and placed it in the root of my SD card, seemed to do nothing. I've also tried to use abd, although I'm not really sure how to use it, basically tried to follow a few different threads, but when I typed adb devices, the list was always blank.
Can anyone help me to either get this MIUI ROM working or at least get me back into recovery so I can re-load ViperRez that I know was working? I am no expert, so please give detailed instructions if you can. Thanks in advance.
Click to expand...
Click to collapse
Have you tried fastboot flashing the boot.img?
gleggie said:
Have you tried fastboot flashing the boot.img?
Click to expand...
Click to collapse
I have tried. Although Im not sure it worked right, or if I even did it right. Just an update. I tried flashing another PH98IMG and it said it was older. Still stuck
ronin_rone said:
I have tried. Although Im not sure it worked right, or if I even did it right. Just an update. I tried flashing another PH98IMG and it said it was older. Still stuck
Click to expand...
Click to collapse
your are s-on you need to extract the boot.img from the zip. go to fastboot and make sure it says fastboot usb
fastboot flash boot boot.img
that will flash the kernel that you need. the ph98img you only need if you are trying to make firmware changes. everything else can be run from the computer.
Also, make sure you are flashing 3.04 roms. Viperrez i think never updated to the global . If you are flashing global roms, you HAVE to do the firmware update.
dragonstalker said:
your are s-on you need to extract the boot.img from the zip. go to fastboot and make sure it says fastboot usb
fastboot flash boot boot.img
that will flash the kernel that you need. the ph98img you only need if you are trying to make firmware changes. everything else can be run from the computer.
Also, make sure you are flashing 3.04 roms. Viperrez i think never updated to the global . If you are flashing global roms, you HAVE to do the firmware update.
Click to expand...
Click to collapse
I kinda understand what you are saying, but the other problem I have is.... When running adb my phone is not listed in the adb devices, although it is listed in the usb devices. Not sure what to do about that.
Are you in charge only mode on the phone?
Is usb debugging enabled?
USB debugging was selected prior to this incident and it was on charge only as well. It was not connected as a usb drive. I cannot get into the settings of the phone to find out what it is now or if its changed.
I would suggest going S-Off, it will make flashing a whole lot easier. As for getting back to a usable state, you should be able to flash a PH98IMG in bootloader. If anything, flash an RUU and go from there.
A few weird things are happening on my phone and I'm quite concerned (even though it's actually working perfectly fine, which is the weirdest part of all!)
A little background: I recently wiped my phone and flashed the Sense 5 Android 4.3, stock rom. Now I'm trying to flash Viper 4.0.
First of all, as the title suggests, whenever I put a zip file on my phone it doesn't show in the TWRP recovery. I downloaded the correct one on the site (the newest one for the HTC EVO 4G LTE) so I don't think that's the problem. Also, I tried to push the file Viper zip onto my phone using this program called WinDroid Toolkit, and it claims it did but when I go into TWRP I cannot see the zip file at all, and if I try to use other folder names (such as the 'boot' folder I saw when I was in TWRP recovery) it says those folders don't exist!
Second of all, TWRP claims there is no OS installed on my phone but when I reboot my phone, it's fine! It just goes to the home screen as usual and it works perfectly fine... so I don't understand this warning but I couldn't shake the feeling that this was relevant to my issue.
I've been combing the forums looking for this type of problem, and I've tried multiple things but to no avail. I've read snippets about partition problems after formatting some phones but I'm not sure because there doesn't seem to be much information about it (at least from what I could find).
Altom85 said:
A few weird things are happening on my phone and I'm quite concerned (even though it's actually working perfectly fine, which is the weirdest part of all!)
A little background: I recently wiped my phone and flashed the Sense 5 Android 4.3, stock rom. Now I'm trying to flash Viper 4.0.
First of all, as the title suggests, whenever I put a zip file on my phone it doesn't show in the TWRP recovery. I downloaded the correct one on the site (the newest one for the HTC EVO 4G LTE) so I don't think that's the problem. Also, I tried to push the file Viper zip onto my phone using this program called WinDroid Toolkit, and it claims it did but when I go into TWRP I cannot see the zip file at all, and if I try to use other folder names (such as the 'boot' folder I saw when I was in TWRP recovery) it says those folders don't exist!
Second of all, TWRP claims there is no OS installed on my phone but when I reboot my phone, it's fine! It just goes to the home screen as usual and it works perfectly fine... so I don't understand this warning but I couldn't shake the feeling that this was relevant to my issue.
I've been combing the forums looking for this type of problem, and I've tried multiple things but to no avail. I've read snippets about partition problems after formatting some phones but I'm not sure because there doesn't seem to be much information about it (at least from what I could find).
Click to expand...
Click to collapse
Try using the TWRP found here:
http://forum.xda-developers.com/showthread.php?t=2639180
Sent from my Nexus 5 using XDA Premium 4 mobile app
download this twrp http://d-h.st/7Cr
name it properly and fastboot flash it. after that mount your device to you pc and transfer a rom zip to storage.
Okay, well I flashed that TWRP and now I'm stuck at the white HTC screen. I can't even get into the bootloader, it just continually boots to the white HTC screen. Thoughts?
Altom85 said:
Okay, well I flashed that TWRP and now I'm stuck at the white HTC screen. I can't even get into the bootloader, it just continually boots to the white HTC screen. Thoughts?
Click to expand...
Click to collapse
RUU or ViperRUU. TBH it sounds like the behavior of a dirty flash. ViperRUU is especially helpful in these situations.
Once done, use the TWRP recommended by Evolution_Freak. There were some major changes to the partitioning in the last few releases, make sure your recovery is appropriate for your ROM.
FesterCluck said:
RUU or ViperRUU. TBH it sounds like the behavior of a dirty flash. ViperRUU is especially helpful in these situations.
Once done, use the TWRP recommended by Evolution_Freak. There were some major changes to the partitioning in the last few releases, make sure your recovery is appropriate for your ROM.
Click to expand...
Click to collapse
Ok it's not stuck anymore, I can get into recovery and bootloader, so I'm not in a panic anymore at least However, my computer is not detecting my phone, nor is VipeRUU. If I try to mount to the computer via TWRP, nothing comes up. BTW my recovery is 2.7.8.0b now. Still no OS, still gets stuck on the HTC screen until I boot to recovery or bootloader
Edit: Now the computer tries to install drivers for my phone whenever I plug it in. It pops up as HTC MTP Device, always fails to install, then has a warning in the device manager. So I uninstalled the drivers, uninstalled HTC Sync, reinstalled HTC Sync. Didn't help. This is beyond frustrating...
Edit 2: After scouring the internet someone said to lock the bootloader and that'll allow my PC to see my phone. Well, now i have a RELOCKED (that's what it says on top) bootloader and I'm no closer to the solution methinks. I'm ready to just throw this phone out the window.
Edit 3: I actually discovered ViperRUU has a way to bypass the initial screen so I can use it in bootloader. Great, except now it's stuck on "Flashing..." and has been for half an hour. I really might throw this phone out the window.
5th and final edit: VipeRUU just would not work at all, so I had to go back to an older stock RUU, which sucks but at least my phone is working now Thanks for your help guys!
I'm trying to get the user files off a phone with corrupted cache. When booted normally, it gets stuck on the white T-Mobile splash screen. When booting into recovery, I get an error about the cache and the phone restarts without loading into recovery. Screenshots attached.
I can get into download mode fine.
Using Odin to flash a custom recovery gives me the PASS message, but when I restart the phone, the stock recovery is still there with the same error message. I've tried TWRP and CWM.
I am hesitant to try flashing a custom ROM because I don't want to lose the data. The phone is not important, but the data is.
firstrival said:
I'm trying to get the user files off a phone with corrupted cache. When booted normally, it gets stuck on the white T-Mobile splash screen. When booting into recovery, I get an error about the cache and the phone restarts without loading into recovery. Screenshots attached.
I can get into download mode fine.
Using Odin to flash a custom recovery gives me the PASS message, but when I restart the phone, the stock recovery is still there with the same error message. I've tried TWRP and CWM.
I am hesitant to try flashing a custom ROM because I don't want to lose the data. The phone is not important, but the data is.
Click to expand...
Click to collapse
Dont try flashing a custom ROM on to the phone. Try flash the stock ROM through the lastest odin with the lastest drivers and let me know how that works out for ya. Unless that wipes the phone ( havent used it in quite some time) then I have no idea man.
I tried flashing the T399UVUAMJ4 ROM throught Odin. It went through the entire process and rebooted, but nothing changed. Does this mean the bootloader is locked?
firstrival said:
I tried flashing the T399UVUAMJ4 ROM throught Odin. It went through the entire process and rebooted, but nothing changed. Does this mean the bootloader is locked?
Click to expand...
Click to collapse
I'm not sure maybe want to ask someone else I'm not as experienced as some people on here. Sorry man goodluck
I hope someone can help you out. I would say your cache partition somehow got renamed but I'm not sure if thats possible and if so how to fix it. Maybe someone with ADB knowledge can help?
Also what TWRP were you trying to install? I've had problems when I tried to flash older versions
okay so here is a site with the original firmware for the phone. It has both the t399 and the t399n for odin. It has them labeled so its not too confusing lol. http://forum.gsmhosting.com/vbb/f200/samsung-t399n-metro-pcs-firmware-here-1899016/
find the one for the t399, flash it with odin. this will fully restore your phone. HOPEFULLY it will be able to save the data. I know you said you did this before but I'm not sure if it was just system or everything like here.
kireflow90 said:
okay so here is a site with the original firmware for the phone. It has both the t399 and the t399n for odin. It has them labeled so its not too confusing lol. http://forum.gsmhosting.com/vbb/f200/samsung-t399n-metro-pcs-firmware-here-1899016/
find the one for the t399, flash it with odin. this will fully restore your phone. HOPEFULLY it will be able to save the data. I know you said you did this before but I'm not sure if it was just system or everything like here.
Click to expand...
Click to collapse
So I tried the T399 files. Flashed with no errors, but when it reboots everything is still the same. I've even tried flashing from another computer. Mind boggling!
firstrival said:
So I tried the T399 files. Flashed with no errors, but when it reboots everything is still the same. I've even tried flashing from another computer. Mind boggling!
Click to expand...
Click to collapse
Thanks for the quick reply. Its a shame to hear that it didn't work
How did you come to this? as to me it seems the partions have be modified hence why giving those errors I seen similar errors to when users change cache sizes which tends to brick device or from using incorrect pit files.
You never be able to recover data from flashing Odin may be slim chance by custom Rom thru recovery if was a bkup of original system and not selecting data your old data may conflict causing either bootloop or basically stuck on splash screen.
If you was ever able to best way to pull data from device would be thru adb may have a chance.
This phone belongs to a friend of a friend. They said they brought it to T-Mo because it hung up during boot. The store worked on it for a few minutes, but couldn't get it to boot up either. When I tried to go into recovery, they said the store already went into that screen too. They have since bought a new phone, but would like to get the photos off it if possible. They never had an SD card so it's still on the device.
At the moment, I can just go into download mode. I was hoping to flash a custom recovery so I might possibly be able to ADB from there since it won't load the stock recovery.
I have a very similar issue but without "cache error messages". The phone (Samsung Galaxy Light with stock ROM and TWRP) just reboots no matter what I try to flash into it.
It does it while "drawing" the Samsung Logo animation (blue ring that gets created revealing the word samsung), so after the white wrintings of the phone name.
My attempts so far:
1. Flashed newer version of TWRP
2. Flashed CWM
3. Flashed two different versions of stock ROM (the original one and the one that T-Mobile released when upgraded to latest jelly Bean)
4. Flashed a custom ROM (Light ROM found here which is based on the stock one).
EVERY TIME the outcome was the same:
Phone reboots right after the phone name (written in white) while the Samsung animation starts. It just stops while the blue oval begins to appear. If I try to boot into recovery (via home/power/volume up combo) it shows the TWRP splash screen but it reboots right after and this happened even after I flashed (successfully according to Odin) CWM.
It really looks like I did nothing so far but I can assure it's not the first time I use Odin (4 different versions) to flash a custom recovery or a ROM. I did it successfully on other 4 different phones (all samsung).
On this same phone I did it the first time when flashed TWRP in order to root it via recovery.
I have no idea what to do next. I was thinking about using adb in order to wipe all the caches (dalvik included) but it looks like the phone can't be recognized unless I boot it into recovery mode (adb get-state returns "unknown") and I don't think I can do anything in Download mode which is the only mode I can enter apparently.
I was hoping someone here can help me to spare some money buying a new phone for my wife and tossing this one which is the best for its small size imho.
Thank you in advance to anyone interested in at least shading some light on what could have happened. This started to happen out of the blue and the last time I actively modified something (updating the recovery) was almost one year ago... It always worked like a charm until 4 days ago...
EDIT: To clarify: the reason why I posted here is because this looked like a problem the most similar to mine (boot loop or stuck at boot and can't enter either regular or recovery mode). I cannot create new posts due to my low "rank" yet... Please feel free to move this if you think it belongs to a separate thread.
fulgorevinnie said:
I have a very similar issue but without "cache error messages". The phone (Samsung Galaxy Light with stock ROM and TWRP) just reboots no matter what I try to flash into it.
It does it while "drawing" the Samsung Logo animation (blue ring that gets created revealing the word samsung), so after the white wrintings of the phone name.
My attempts so far:
1. Flashed newer version of TWRP
2. Flashed CWM
3. Flashed two different versions of stock ROM (the original one and the one that T-Mobile released when upgraded to latest jelly Bean)
4. Flashed a custom ROM (Light ROM found here which is based on the stock one).
EVERY TIME the outcome was the same:
Phone reboots right after the phone name (written in white) while the Samsung animation starts. It just stops while the blue oval begins to appear. If I try to boot into recovery (via home/power/volume up combo) it shows the TWRP splash screen but it reboots right after and this happened even after I flashed (successfully according to Odin) CWM.
It really looks like I did nothing so far but I can assure it's not the first time I use Odin (4 different versions) to flash a custom recovery or a ROM. I did it successfully on other 4 different phones (all samsung).
On this same phone I did it the first time when flashed TWRP in order to root it via recovery.
I have no idea what to do next. I was thinking about using adb in order to wipe all the caches (dalvik included) but it looks like the phone can't be recognized unless I boot it into recovery mode (adb get-state returns "unknown") and I don't think I can do anything in Download mode which is the only mode I can enter apparently.
I was hoping someone here can help me to spare some money buying a new phone for my wife and tossing this one which is the best for its small size imho.
Thank you in advance to anyone interested in at least shading some light on what could have happened. This started to happen out of the blue and the last time I actively modified something (updating the recovery) was almost one year ago... It always worked like a charm until 4 days ago...
EDIT: To clarify: the reason why I posted here is because this looked like a problem the most similar to mine (boot loop or stuck at boot and can't enter either regular or recovery mode). I cannot create new posts due to my low "rank" yet... Please feel free to move this if you think it belongs to a separate thread.
Click to expand...
Click to collapse
ok so i read all that you have done which is basically everything i would of suggested to you other then could it be the battery may be faulty just random thought noticed you never mentioned trying kies you may have a chance with it beening detected as i see you can enter download mode so that help with odin also kies also have you tried firmware from here sam mobile here T399 or T399N OH2 lastest for tmo and OH3 for metro.
Try to only flash that thru odin i use 3.07 or 3.09 only difference is the pda button changes to AP .works perfect for me so i suggest it then returning back to stock recovery/firmware if it boots then awesome. then return to TWRP 2.8.4.0 beening lastest for this device also needed for CM12 also my projects for device current and future.
when using odin make sure that only “Auto Reboot” and “F. Reset Time” options are selected.
also just note when going into twrp release buttons as soon as you see logo otherwise it will continue to boot thru well happens to me when daydreaming lol.
also if your seeing this adb get-state returns "unknown" i believe installing kies may install the drivers for detection im not postive on that but im sure it something to do with missing the adb driver for device maybe another dev can confirm this ?
hopefully this may be of some help i keep on thread to see how the outcome goes
Thanks for the reply DJBoxer!
Regarding the battery it's a new one and I can confirm it's not a battery problem considering that the phone can stay in download mode and unplugged from any power source for very long times without turning off/rebooting and it never failed to keep the charge so far. I also tried with the old battery and the phone behaves exactly the same way.
I used 3 different versions of Odin (1.87, 3.07 and 3.09) with only “Auto Reboot” and “F. Reset Time” options selected and every time I got the PASS message even though the phone keeps rebooting after the first reboot once the procedure is terminated.
To clarify one thing : when I said "it shows the TWRP splash screen but it reboots right after and this happened even after I flashed CWM" I meant to point out that it looks odd to see the TWRP splash screen (even for just a few seconds) after I just flashed CWM and that makes me think that I'm really not flashing anything here...
Thank you very much for taking the time of posting the links and I actually didn't try with that latest OH2 version.
I am downloading it right now (it takes a while from sammobile) and I will keep you posted on the outcome.
I will try to flash it via Odin and I'll also try the latest version mentioned on sammobile (Odin3_v3.10.7).
Regarding Kies I wasn't able to have it recognize the phone. I may be missing something but I tried updating drivers and going through all the guided procedures with no luck... If you say it should recognize the phone right away while in download mode then something is amiss.
Could you please confirm that I should also be able to use adb commands with the phone connected via USB in download mode? Cause that doesn't look like the case either...
Thank you again and I'll give updates here about my last attempts.
Sorry for the late reply...
Nothing changed by the way...
I am about to send the phone back to the seller who told me they'll try to fix it. Let's see how it goes.
tl;dr - Can't seem to find my way out of a software brick. Have sideloaded the stock OS from 1+ but still forever getting the spinning dots or fastboot screen, depending on which mode i boot into.
Hi all. Signed up to make this thread, but i've been lurking for years.
I have a OnePlus X that is about the least modded smartphone i've ever owned. I've never been pleased enough with a retail product that i didn't feel compelled to strip out the bloat and start over, until this phone. Other than stock, i've just got a gallery app, some apps for manipulating text files or compiling code, couple games, and social media apps.
Anyway, a few days ago i got a notification about a software update. Downloaded. Installed. Updated. No problem.
Maybe yesterday or the day before, it showed up again. This morning i downloaded, installed, and suddenly i have apps closing. It's been over 12 hours so i'm hazy on how it all started, but i was getting something like "package installer" errors when attempting to open some apps. Same deal when i went to adjust permissions of those affected apps. Every time i unfocused a box that had pulled up swype, i would get an error message saying swype crashed or closed or something.
So i started uninstalling third party apps (i don't keep many, and most i've had for years so i think they're probably trustworthy). Same deal. Started uninstalling updates to google apps. Same deal. Went to uninstall and reinstall some non stock apps that i'd kept previously. Nothing.
I went to cook breakfast while an app was reinstalling, and i came back to a red dot on my screen with two white dots chasing each other around it. From what i'm reading that's a sign of a bootloop or software brick. I've taken all steps i could find, including wiping cache and sideloading a fresh stock OS, but to no avail.
Is it that i've ruined my google apps somehow and need to restore them? How would i even go about figuring out what the problem is? Any advice or guidance is appreciated
Hi,
As your device is in bootloop state, try flashing the stock rom. Make sure you wipe data and cache. As far as after update problems, i faced it few times. After updating many app crashed and phone hangs. So i prefer clean flash over dirty flashing, to make sure everything is hazel free. For the time being i upgraded from 3.1.2 to 3.1.3 without wiping data or cache and facing no problem( of course since it was an OTA). But sometimes situation comes when after update phone act weird, so tbe option which i prefer then is clean flashing the stock rom. Hope this helps.
"A09" said:
Hi,
As your device is in bootloop state, try flashing the stock rom. Make sure you wipe data and cache. As far as after update problems, i faced it few times. After updating many app crashed and phone hangs. So i prefer clean flash over dirty flashing, to make sure everything is hazel free. For the time being i upgraded from 3.1.2 to 3.1.3 without wiping data or cache and facing no problem( of course since it was an OTA). But sometimes situation comes when after update phone act weird, so tbe option which i prefer then is clean flashing the stock rom. Hope this helps.
Click to expand...
Click to collapse
I have wiped cache, deleted data, tried a factory reset in the stock bootloader, and i have used ADB to sideload a full stock rom (not upgrade package) that i downloaded from OnePlus.
Flash old stock recovery then 2.2.3. From there you can flash any MM stock firmware.
Exodusche said:
Flash old stock recovery then 2.2.3. From there you can flash any MM stock firmware.
Click to expand...
Click to collapse
Pardon me for being nooby, but how do i do this? Do i just sideload in ADB like i did the ROM? Most instructions i'm finding assume access to the OS either normally or through fastboot. I'm just stuck in the default recovery.
Thanks for the tip, though. Looking for a copy of the old stock recovery now. Did OnePlus alter their stock recovery recently? In some threads i've seen people say that a recent update made them unable to load a non-stock ROM. Is that the new recovery blocking access to non-1+ operating systems?
jtg1984 said:
Pardon me for being nooby, but how do i do this? Do i just sideload in ADB like i did the ROM? Most instructions i'm finding assume access to the OS either normally or through fastboot. I'm just stuck in the default recovery.
Thanks for the tip, though. Looking for a copy of the old stock recovery now. Did OnePlus alter their stock recovery recently? In some threads i've seen people say that a recent update made them unable to load a non-stock ROM. Is that the new recovery blocking access to non-1+ operating systems?
Click to expand...
Click to collapse
Fastboot flash easiest way. Make sure it's the old recovery from 2.2.2. Not the new mm stock recovery.
Yes, but how do i install the old stock recovery? I dug around on the forums and found the file, but the phone rejects it when sideloading and doesn't show the .img in the filesystem when inserted on a SD card.
Have to send it off to 1+ maybe? Literally all i can access right now is the (new) stock recovery. I never modded, rooted, etc before the software update sent me into the chasing dots
jtg1984 said:
Yes, but how do i install the old stock recovery? I dug around on the forums and found the file, but the phone rejects it when sideloading and doesn't show the .img in the filesystem when inserted on a SD card.
Have to send it off to 1+ maybe? Literally all i can access right now is the (new) stock recovery. I never modded, rooted, etc before the software update sent me into the chasing dots
Click to expand...
Click to collapse
I m not a dev, i m a newbie like you. i hv done a lot of experiments with my oneplus-x, as for u the first update u got few days back should be oos 3.1.2 and the one u got 2 days before should be 3.1.3. When u upgrade from lollipop to marshmellow, even your stock recovery got upgraded to latest version, which is something different from old lollipop recovery.
You said you have access to recovery mode. thts pretty much gud, what u can do is that wipe data and cache through stock recovery and do a clean install of oos 3.1.3. I ll be providing all the necessary links down below. If you need assistance with fastboot cmds and anything feel free to ask.
Thanks to original link provider @Sachin7843
Useful Links: -
1. Stock Lollipop Recovery - https://s3.amazonaws.com/oxygenos.oneplus.net/OPX_recovery.img
2. Official TWRP Recovery - https://dl.twrp.me/onyx/
3. Blu Spark Recovery - http://forum.xda-developers.com/devdb/project/dl/?id=20236
4. SuperSU for OOS 3.x.x - https://drive.google.com/file/d/0B4K5cvm1zdldcmZpc3RuVnRjUUE/view
5. Unbrick Guide - http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
6. Official Oxygen OS 3.1.3 link - https://s3.amazonaws.com/oxygenos.o...OTA_018_all_201609291837_741146bcf28e4587.zip
7. SD Card Writable fix in MM - http://forum.xda-developers.com/android/software/fix-extsd-fix-v1-0b-2016-01-18-t3296266
8. For Stock MM Recovery - http://forum.xda-developers.com/oneplus-x/general/oxygenos-3-1-0-marshmallow-community-t3445043
Sorry for my bad english
jtg1984 said:
Yes, but how do i install the old stock recovery? I dug around on the forums and found the file, but the phone rejects it when sideloading and doesn't show the .img in the filesystem when inserted on a SD card.
Have to send it off to 1+ maybe? Literally all i can access right now is the (new) stock recovery. I never modded, rooted, etc before the software update sent me into the chasing dots
Click to expand...
Click to collapse
Don't sideload it, use fastboot to flash it. "Fastboot flash recovery name.img" - without he quotes and the image name.
Sorry for vanishing. Had a busy week.
Not sure what happened the first time i tried to put the 2.2.3 image on the SD card, because the file didn't show up in my recovery, but i tried again later (after giving up on flashing the old recovery, since i couldn't figure out how to do that in recovery) and managed to do a clean install of the older OOS version.
That did the trick, and after booting up, my phone proceeded to update again - this time without any crashes or errors with my apps afterward. The phone still does the red dot with the white dots chasing around it when it boots up, which must be the new boot screen. It also seems to stay on that screen for much longer than it stayed on the old morphing shape boot screen, but it still boots up reliably now after 30-60 seconds rather than freezing in boot forever.
I've since enabled dev mode on my phone. Is that going to be enough to enable ADB commands from recovery? I kind of like that i've kept my phone stock, so i'll leave it that way if i can, but it would have been much easier to fix this problem if i'd had access to most of my debug commands. As it was, without dev mode and in the standard recovery, it seemed that sideload was the only command i was able to use, and only when the phone was requesting a sideload over usb