[ROM][5/3][Verizon] Stock Rooted 4.4.2 / 24A - Root and Busybox - TWRP flashable! - G Pad 8.3 Android Development

AS the name implies this is a stock rooted Android 4.4.2 / 24A Stock Verizon ROM!
Features
100% Stock
Rooted / Powered by SuperSU by @Chainfire!
Busybox
FSTRIM on install
Zip Aligned
No other edits
Install:
Copy ROM to storage
Reboot to TWRP recovery. REQUIRES the latest!
Factory Reset (no other wipes needed)
Flash ROM
Reboot and Profit!
Thanks!
@jparasita for gifting me the tablet!
@roirraW "edor" ehT for the links to stock KDZ!
If you appreciate my time and effort please consider a small (or large) donation
A little bit goes a long ways!
Please hit Thanks!
Download HERE!
​

Sharing Policy
You are free to use this ROM or any part of this ROM any way you like as long as you give proper credit!
Consider this your permission! Please do not PM me asking if its OK to build off this ROM. Permission granted!
Hit Thanks!

CleanROM soon!

Here we go! finally a flashable stock for this tablet cannot wait for Cleanrom! Lets get excited everyone!

Corrected download link in the OP.

scrosler said:
CleanROM soon!
Click to expand...
Click to collapse
I've been waiting for months for you to get your hands on this....and it's about time....LOL
i've used your roms on every device i've owned.....

Nice!!!! Downloading now sir!!!! Thanks

xbxjunkie said:
I've been waiting for months for you to get your hands on this....and it's about time....LOL
i've used your roms on every device i've owned.....
Click to expand...
Click to collapse
Wow, looking at your Sig block... I believe you We have had a lot of the same devices!
sporty377 said:
Nice!!!! Downloading now sir!!!! Thanks
Click to expand...
Click to collapse
Cool!

When you say "latest TWRP" what version are you talking about? 2.7.0.1? On their page only the google play version is supported. Thanks!

tomalak007 said:
When you say "latest TWRP" what version are you talking about? 2.7.0.1? On their page only the google play version is supported. Thanks!
Click to expand...
Click to collapse
VK810_twrp_2.7.0.2.zip That is the correct recovery to use look at this thread for proper instructions http://forum.xda-developers.com/showthread.php?t=2726707 I do know that its a little buggy for this tablet but works make sure you are unplugged when going into recovery.

For some strange reason i can't flash 2.7.0.2 keeps failing to flash 2.7.0.2.....
Sent from my VK810 4G using XDA Free mobile app

sporty377 said:
For some strange reason i can't flash 2.7.0.2 keeps failing to flash 2.7.0.2.....
Sent from my VK810 4G using XDA Free mobile app
Click to expand...
Click to collapse
Sounds like a good post for the TWRP thread.

sporty377 said:
For some strange reason i can't flash 2.7.0.2 keeps failing to flash 2.7.0.2.....
Sent from my VK810 4G using XDA Free mobile app
Click to expand...
Click to collapse
I posted the link to the thread I would go through the steps worked fine for me.

I just spent 3-4 hrs getting twrp on 4.4.official firmware, now finally flashing yours. hope its worth it .. it should be knowing your rep, Thanks buddy.
also the latest twrp is 2.7.0.2 right??

4218kris said:
I just spent 3-4 hrs getting twrp on 4.4.official firmware now finally flashing yours hope its worth it .. it should be knowing your rep, Thanks buddy.
also the latest twrp is 2.7.0.2 right??
Click to expand...
Click to collapse
This is just a flashable stock base rom fyi this is not cleanrom that is still in the works

4218kris said:
I just spent 3-4 hrs getting twrp on 4.4.official firmware now finally flashing yours hope its worth it .. it should be knowing your rep, Thanks buddy.
also the latest twrp is 2.7.0.2 right??
Click to expand...
Click to collapse
Its just a stock ROM. Mostly posted it so other devs could use it as well. As far as difference from the stock 4.4.2 Official, you wont see any difference.
When I release CleanROM you will see and feel the difference.

jparasita said:
This is just a flashable stock base rom fyi this is not cleanrom that is still in the works
Click to expand...
Click to collapse
i understand, but now i have twrp and 4.4.2

4218kris said:
i understand, but now i have twrp and 4.4.2
Click to expand...
Click to collapse
Very true! Atleast you are prepared for when I do release a 4.4.2 custom ROM.
IM still recovering from surgery so I hope in a few days to get nice de-bloated / optimized ROM out.

What would be the major differences between this stock rom you released and the clean rom? Bloat removal? Is there a Lollipop based rom in our future since I see that Lollipop is now available in some other parts of the world for this tablet.

Oh wow man! Thanks for this. Looking forward to CleanROM. Started my G2 with CleanROM and loved it. Thank you for giving this tablet some love!!

Related

Firmware update

Can we take firmware update if rooted and s on?
Sent from my EVO using xda app-developers app
From what I've been told and understand, never ever take an update from the carrier. All the good stuff will be extracted and the bad left out with the next update of whatever ROM you are running... usually if not, find another ROM
Sent from my EVO using xda app-developers app
You will lose root. Never take a firmware update (from what I've read) Only update profile and prl.
treIII said:
Can we take firmware update if rooted and s on?
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Are you able to go s-off? Sounds like you might be since you haven't taken any OTAs of course depending on when your got your phone too. If so then you should do it.
There are ways to upgrade your firmware without taking it via OTAs.
There are several threads in development that address your concerns.
Sent from my EVO using xda premium
Sorry if I ask a question on this post did not wanna make a new one anyways anyone having heat issues on the hboot that LazyPanda post on there Site 1.12.2222 when charging?
Sent from my EVO using xda premium
Firmware upgrade a must ?
Hi, I would love to try the MeanBean2.4 ROM, I understand that a firmware upgrade would be a must ? I'm on Viper4G2.0.2 ROM and if I do a firmware update I'm sure my Viper4g rom will not load or run correctly. Is there a way to reverse a firmware update ? Can I do it via my installed TWRP 2.3.3 ? Currently I have S-Off Lazy Panda, Hboot 1.12.111, Radio 1.02.12.0427.
I like the Viper4G ROM, but getting old, has minor issues, got Gogole now working on my Viper rom but can't update via Play Store..no big issues, but I would still like to have the option to go back to this ROM. I did a full backup (Sys,Data,Boot,Recovery,Cache) via TWRP. Would a restore fix any mess created by firmware attempt ? Could I even get to TWRP after firmware update or a botched update ?
Any input would be greatly appreciated
Regards,
Julian
CBRRider said:
From what I've been told and understand, never ever take an update from the carrier. All the good stuff will be extracted and the bad left out with the next update of whatever ROM you are running... usually if not, find another ROM
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
julianikos said:
Hi, I would love to try the MeanBean2.4 ROM, I understand that a firmware upgrade would be a must ? I'm on Viper4G2.0.2 ROM and if I do a firmware update I'm sure my Viper4g rom will not load or run correctly. Is there a way to reverse a firmware update ? Can I do it via my installed TWRP 2.3.3 ? Currently I have S-Off Lazy Panda, Hboot 1.12.111, Radio 1.02.12.0427.
I like the Viper4G ROM, but getting old, has minor issues, got Gogole now working on my Viper rom but can't update via Play Store..no big issues, but I would still like to have the option to go back to this ROM. I did a full backup (Sys,Data,Boot,Recovery,Cache) via TWRP. Would a restore fix any mess created by firmware attempt ? Could I even get to TWRP after firmware update or a botched update ?
Any input would be greatly appreciated
Regards,
Julian
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2045935 choose the first file under Firmware Downloads/rename PJ75IMG / put it on your ext sdcard / boot into bootloader / it should ask you if you want to upgrade / when it's done and you are rebooted delete the file from your sdcard
Going back to old Firmware possible ?
Thank you for that info, I did find one firm just a bit newer PJ75IMG_3.15.651.6-no-boot-recovery.zip and I do know how to install. I do not expect an answer on my question if I can still run Viper4G2.0.2 after this upgrade (will ask Team Venom), however, would you know if I can revert back to the old Firmware ? Via TWRP or other method ? I hear renamig the old PJ75IMG.old that I left on the phone to PJ75IMG.zip and installing it to try to get old firmware is a bad idea and possible brick road ! lol
Thanks again,
Julian
bigdaddy619 said:
http://forum.xda-developers.com/showthread.php?t=2045935 choose the first file under Firmware Downloads/rename PJ75IMG / put it on your ext sdcard / boot into bootloader / it should ask you if you want to upgrade / when it's done and you are rebooted delete the file from your sdcard
Click to expand...
Click to collapse
julianikos said:
Thank you for that info, I did find one firm just a bit newer PJ75IMG_3.15.651.6-no-boot-recovery.zip and I do know how to install. I do not expect an answer on my question if I can still run Viper4G2.0.2 after this upgrade (will ask Team Venom), however, would you know if I can revert back to the old Firmware ? Via TWRP or other method ? I hear renamig the old PJ75IMG.old that I left on the phone to PJ75IMG.zip and installing it to try to get old firmware is a bad idea and possible brick road ! lol
Thanks again,
Julian
Click to expand...
Click to collapse
Reverting your firmware will indeed brick you AFAIK and you should be able to run Viper4G with the new firmware when I updated my firmware I was running an ICS rom I didn't notice any problems.
Going for it...
Well I think I'm going to try now, I still hope that by saving my original firmware file on my SD and then run TWRP Restore will get me back...or not ! lol Worse case I'll say goodbye to the Viper Rom... God help me, I love my EVO..ha haa
bigdaddy619 said:
Reverting your firmware will indeed brick you AFAIK and you should be able to run Viper4G with the new firmware when I updated my firmware I was running an ICS rom I didn't notice any problems.
Click to expand...
Click to collapse
Sweet !
Huge thanks ! No problem with update, loaded Viper4g ICS fine, tested functions..working !
Again...thanks for the help !
bigdaddy619 said:
Reverting your firmware will indeed brick you AFAIK and you should be able to run Viper4G with the new firmware when I updated my firmware I was running an ICS rom I didn't notice any problems.
Click to expand...
Click to collapse
julianikos said:
Huge thanks ! No problem with update, loaded Viper4g ICS fine, tested functions..working !
Again...thanks for the help !
Click to expand...
Click to collapse
Your first screenie shows you are still on the older radio. You didn't do the update?
Old Radio
It used to be like this before the update. I used the link you gave me and did the PJ75IMG.zip update.
bigdaddy619 said:
Your first screenie shows you are still on the older radio. You didn't do the update?
Click to expand...
Click to collapse
julianikos said:
It used to be like this before the update. I used the link you gave me and did the PJ75IMG.zip update.
Click to expand...
Click to collapse
It appears you flashed the older PJ75IMG.zip your baseband should be 1119 as the last 4 numbers
Sent from my PoS MoPho
Wrong image
founf a link to Jewel_Radio_1.12.11.1119.zip file. Tried to flash, said wrong image. Am pretty sure was for Evo LTE. Do you have a link by anychance ?
Tx,
JK
bigdaddy619 said:
It appears you flashed the older PJ75IMG.zip your baseband should be 1119 as the last 4 numbers
Sent from my PoS MoPho
Click to expand...
Click to collapse
julianikos said:
founf a link to Jewel_Radio_1.12.11.1119.zip file. Tried to flash, said wrong image. Am pretty sure was for Evo LTE. Do you have a link by anychance ?
Tx,
JK
Click to expand...
Click to collapse
Check your PM
Worked
Thanks so much for your quick responses. Your link in my PM worked great ! Very nice of you to take time for us noobs. I've been at it since my original EVO 4G. Trying to learn each day, this stuff just moves pretty fast and hard to weed out the good and the bad posts. Really cool to get a nice direct and good advice.
Huge Thanks again,
JK
bigdaddy619 said:
Check your PM
Click to expand...
Click to collapse
julianikos said:
Thanks so much for your quick responses. Your link in my PM worked great ! Very nice of you to take time for us noobs. I've been at it since my original EVO 4G. Trying to learn each day, this stuff just moves pretty fast and hard to weed out the good and the bad posts. Really cool to get a nice direct and good advice.
Huge Thanks again,
JK
Click to expand...
Click to collapse
Congrats and you are very welcome

[ROM][4.4.2] - AT&T 4.18.502.7 Stock Rooted

I'd like to Start off by saying, I'm not a Developer and I have a huge respect for those that are.​
A couple of weeks have passed since AT&T dropped the 4.4.2 OTA update
and no one has yet released a Rom of it.
This is a Rom I cooked for my own use to return to stock 4.4.2, I have flashed it 3 times with both full wipe and dirty flash and it works fine for me.
Feel free to give it a try for yourself.
The Rom includes the /system folder right after the OTAPkg.zip was installed and most all the AT&T apps needed updated on first boot. I added my black boot screens and SuperSU.v1.93. Other than that it's Stock including the Kernel.
Theirs no support for this rom it's just the Stock rom nothing more nothing less ...Enjoy
Download
m7_Stock_Rooted_4.18.502.7_Odex.zip
MD5: 82519965b464356d1ff904c210397851
Weather Animations Patch
MD5: 7e662b62132b443f0b176855ea2f8943​
clsA said:
I'd like to Start of by saying, I'm not a Developer and I have a huge respect for those that are.​
A couple of weeks have passed since AT&T dropped the 4.4.2 OTA update
and no one has yet released a Rom of it.
This is a Rom I cooked for my own use to return to stock 4.4.2, I have flashed it 3 times with both full wipe and dirty flash and it works fine for me.
Feel free to give it a try for yourself.
The Rom includes the /system folder right after the OTAPkg.zip was installed and most all the AT&T apps needed updated on first boot. I added my black boot screens and SuperSU.v1.93. Other than that it's Stock including the Kernel.
Theirs no support for this rom it's just the Stock rom nothing more nothing less ...Enjoy
Download​
Click to expand...
Click to collapse
how do i install this on my htc at&t
dragonheart786 said:
how do i install this on my htc at&t
Click to expand...
Click to collapse
flash it in recovery
btw thanks op for posting this for us at&t users I have been looking for a stock 4.4.2 ROM from at&t
I was waiting for something like this, Thanks
Dirty flashed over 4.3.2 and it worked like a charm, I believe that was the most painless Android update I've done yet. Thanks for posting!
can someone deodex this rom?
Exactly what I've been waiting for, thanks a lot.
Thanks only problem I found is play store won't let me install purchased apps no biggie though titanium backup cured that.
Sent from my HTC One using XDA Premium 4 mobile app
Works perfectly, haven't found an issue yet. Thanks for this.
Sent from my HTC One using xda app-developers app
When I go into the weather app the animations appear to be broken, unless HTC removed them....also has anyone noticed a slightly different look to the pattern lock/animations? It was different the first couple of boots but now it seems to have gone back to how it looked in 4.3...
Fire4Effect said:
When I go into the weather app the animations appear to be broken, unless HTC removed them....also has anyone noticed a slightly different look to the pattern lock/animations? It was different the first couple of boots but now it seems to have gone back to how it looked in 4.3...
Click to expand...
Click to collapse
Yes the weather animations are broken .. I have the files to fix them but I'm lost on where their actually located in the phone's data folder
clsA said:
Yes the weather animations are broken .. I have the files to fix them but I'm lost on where their actually located in the phone's data folder
Click to expand...
Click to collapse
Tested your rom today!
It flashed fine with twrp 2.7.0.0. Not experiencing any issue
weather animations works fine here, maybe because I have dirty flashed it over the dev edtion rom?
alray said:
Tested your rom today!
It flashed fine with twrp 2.7.0.0. Not experiencing any issue
weather animations works fine here, maybe because I have dirty flashed it over the dev edtion rom?
Click to expand...
Click to collapse
Yeah a the dirty flash would still have them
their just still images if you do a factory reset and install
where are the weather_.mp4 files on your phone ?
I tried putting them in System/Media/Weather, but they still don't work
clsA said:
where are the weather_.mp4 files on your phone ?
I tried putting them in System/Media/Weather, but they still don't work
Click to expand...
Click to collapse
can't find them. I have no Weather folder in /System/Media ....
alray said:
can't find them. I have no Weather folder in /System/Media ....
Click to expand...
Click to collapse
That's the location of them in Insertcoin 8.0.1, but like I said they don't load from their
Mike has then in a data/preload folder in One_4.19.401.9_odexed but I'm still lost where they end up
answered my own question .. their in data/preload just have to change the properties to rw-r-r
Thank you!
alray said:
Tested your rom today!
It flashed fine with twrp 2.7.0.0. Not experiencing any issue
weather animations works fine here, maybe because I have dirty flashed it over the dev edtion rom?
Click to expand...
Click to collapse
Got a link to the dev edition rom? Cant seem to find it....
Fire4Effect said:
Got a link to the dev edition rom? Cant seem to find it....
Click to expand...
Click to collapse
Latest RUU avaible at htcdev.com
alray said:
Tested your rom today!
It flashed fine with twrp 2.7.0.0. Not experiencing any issue
weather animations works fine here, maybe because I have dirty flashed it over the dev edtion rom?
Click to expand...
Click to collapse
alray said:
Latest RUU avaible at htcdev.com
Click to expand...
Click to collapse
Wont the RUU wipe my phone? Looking to just flash a rom....
Fire4Effect said:
Wont the RUU wipe my phone?
Click to expand...
Click to collapse
Yes it will
Fire4Effect said:
Looking to just flash a rom....
Click to expand...
Click to collapse
If you don't use cIsA's rom then there is many other rom avaible http://forum.xda-developers.com/htc-one/#romList I will not discuss about other rom here (off topic)

[FIX][Oversharpening][All Variants] Stock kernel with oversharpening fix.

Many of you know exactly what "oversharpening" is... for those who not, just google "g3 oversharpening" or check this article.
After hours spent trying almost everything i finally managed to remove that. Check in the 2nd thread to see the difference.
Here you go... just flash the kernel in recovery but remember to make a backup of the boot partition before, just in case it will not works.
Remember... the only weird thing is that you have to turn off the screen and then on again to make it works. Just the 1st time after the boot.
DOWNLOADS:
D855 Kitkat Lollipop
D851 Kitkat
D850 Kitkat
LS990 Kitkat
F400 Kitkat
VS985 Kitkat
D852 Kitkat
...i'm currently building for all the variants
Of course, tell me what you think.
Like always... DONATIONS are wellcome!!!
Lollipop Source
Kitkat Source
tnx to @Tectas for the kernel source
Thanks try and report tomorow.
Awesome job! Tectas and/or I plan on pulling this to the rin repository. Credit will be given, thank you!
Is this for the new zv6 update, or does it matter which version?
bizzzle said:
Is this for the new zv6 update, or does it matter which version?
Click to expand...
Click to collapse
bump
Sent from my LGLS990 using XDA Free mobile app
mrkrabs said:
bump
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
Zv4 and zv6 are nearly identical. I've been running rin kernel for zv4 on zv6 for days with no issue. Kernel source looks the same.
HPTesla said:
Zv4 and zv6 are nearly identical. I've been running rin kernel for zv4 on zv6 for days with no issue. Kernel source looks the same.
Click to expand...
Click to collapse
I was under the impression that the new ZV6 update came with a new kernel. I thought that's what fixed the AUX problems, as well as some other issues. I guess maybe that was in the ROM and not in the kernel?
Your OP says this file is a Kernel. Are we actually flashing a full kernel, or does this file modify our existing kernel?
I gave this a shot last night on my LS990 before I read your reply. It does indeed fix my oversharpening issue. No bugs have been noticed so far. Thanks! I'm surprised there isn't more discussion on this thread so far!!!
BTW, I updated to ZV6 a couple days ago via dirty flash over stock rooted.
bizzzle said:
I was under the impression that the new ZV6 update came with a new kernel. I thought that's what fixed the AUX problems, as well as some other issues. I guess maybe that was in the ROM and not in the kernel?
Your OP says this file is a Kernel. Are we actually flashing a full kernel, or does this file modify our existing kernel?
I gave this a shot last night on my LS990 before I read your reply. It does indeed fix my oversharpening issue. No bugs have been noticed so far. Thanks! I'm surprised there isn't more discussion on this thread so far!!!
BTW, I updated to ZV6 a couple days ago via dirty flash over stock rooted.
Click to expand...
Click to collapse
I did say "nearly". So close in fact that I have run kernels for one on the other without issue. That's all I meant.
I never really noticed the sharpening but now it does look way more natural to me. Thanks man.
Does this do anything if we are running cm11 or cm12. I'm currently running cm12 11/25 build. But yesterday I flashed bar-rin vz6 rom, now I'm on cm12
Sent from my LG-ls990 using Xparent Green Tapatalk 2
aheeejd said:
Does this do anything if we are running cm11 or cm12. I'm currently running cm12 11/25 build. But yesterday I flashed bar-rin vz6 rom, now I'm on cm12
Sent from my LG-ls990 using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
No it doesn't do anything because Cm has its own kernel. Unless the dev includes it into his cm kernel sources then it would. The kernel changes as you flash between Roms especially between stock based and aosp Roms.
This worked great, thank you very much. Definitely noticed an improvement to the point where it took me by surprise when I looked at the phone. So much more detail. Just like on an HDTV, turn the sharpness off!
Skin1980 said:
Many of you know exactly what "oversharpening" is... for those who not, just google "g3 oversharpening" or check this article.
After hours spent trying almost everything i finally managed to remove that. Check in the 2nd thread to see the difference.
Here you go... just flash the kernel in recovery but remember to make a backup of the boot partition before, just in case it will not works.
Remember... the only weird thing is that you have to turn off the screen and then on again to make it works. Just the 1st time after the boot.
DOWNLOADS:
all I have is the stock recovery , How is that done ? Thanks .
Click to expand...
Click to collapse
Houndog101 said:
Skin1980 said:
Many of you know exactly what "oversharpening" is... for those who not, just google "g3 oversharpening" or check this article.
After hours spent trying almost everything i finally managed to remove that. Check in the 2nd thread to see the difference.
Here you go... just flash the kernel in recovery but remember to make a backup of the boot partition before, just in case it will not works.
Remember... the only weird thing is that you have to turn off the screen and then on again to make it works. Just the 1st time after the boot.
DOWNLOADS:
all I have is the stock recovery , How is that done ? Thanks .
Click to expand...
Click to collapse
You have to be rooted and bumped in order to flash this or anything else that is custom.
Click to expand...
Click to collapse
Thanks , I'm rooted (stump root) , I'll search for Bump..
Houndog101 said:
Thanks , I'm rooted (stump root) , I'll search for Bump..
Click to expand...
Click to collapse
Here
http://forum.xda-developers.com/showthread.php?t=2900588
And use Flashify to flash the image easy
Coming from somebody with 20/16 vision, THANK YOU! I thought something was weird with the screen... couldn't tell what it was but knew something was off. I've had AMOLED screens for a while now, so though it was related to switching from AMOLED to IPS.
THANKS OP!!!
Working great on a Sprint LS990 stock rooted/bumped.
Just posting in here that I tried this and it is very, very nice! It took me a few times of flashing this vs Stock ZV6 kernel to really notice it but once I did, it is night and day difference.
Cheers for this, maybe we can get this implemented in future kernels if LG doesn't?
So ive used this before and seemed to work ok but now when i try it, it hangs at the boot screen and flashes blue and orange on the lcd, black screen. Tried different downloads and all... Baron's ROM atm...
jr71x said:
So ive used this before and seemed to work ok but now when i try it, it hangs at the boot screen and flashes blue and orange on the lcd, black screen. Tried different downloads and all... Baron's ROM atm...
Click to expand...
Click to collapse
I've already added this to Barrin 3.0.1

New Firmware G900TUVS1FOL1

I got an OTA notification this morning to install G900TUVS1FOL1. Went ahead an applied the OTA update and everything seems to be running much better than before. A lot of the lag that I was seeing before is now gone. No word on battery life as I only had the update installed for about 12 hours. Figured I would let people know that there is a new update available. Haven't seen much information posted about it.
I am unrooted BTW, so I can't really answer any questions about that.
Link to update: http://www.sammobile.com/firmwares/download/63941/G900TUVS1FOL1_G900TTMB1FOL1_TMB/
AFH download link from @thisisapoorusernamechoice https://www.androidfilehost.com/?fid=24389512218018506
Roman217 said:
I got an OTA notification this morning to install G900TUVS1FOL1. Went ahead an applied the OTA update and everything seems to be running much better than before. A lot of the lag that I was seeing before is now gone. No word on battery life as I only had the update installed for about 12 hours. Figured I would let people know that there is a new update available. Haven't seen much information posted about it.
I am unrooted BTW, so I can't really answer any questions about that.
Link to update: http://www.sammobile.com/firmwares/download/63941/G900TUVS1FOL1_G900TTMB1FOL1_TMB/
Click to expand...
Click to collapse
Can you give a screenshot of your about phone.
Screenshots attached.
Checked for update and it's pulling it down, about 330mb in size.
Sent from my SM-G900T using XDA Free mobile app
I'm receiving this OTA as well, downloading the odin flashable firmware then rooting, wish me luck
Any feedback guys?
devoidx said:
Any feedback guys?
Click to expand...
Click to collapse
I've had no lag or any of the problems that I normally run into on stock roms.
I'm rooted on stock 4.4.2. What's the best way to take this one (do I need to get up to a 5.0.x first, etc.), and preserve root?
Sent from my SM-G900T using Tapatalk
Playb3yond said:
View attachment 3607101
View attachment 3607102
I'm receiving this OTA as well, downloading the odin flashable firmware then rooting, wish me luck
Click to expand...
Click to collapse
Were you able to re-root after using Odin?
Apostlemk said:
Were you able to re-root after using Odin?
Click to expand...
Click to collapse
I was, seems to be better than before. Just need to debload my stock rom and I'm set
Sent from my SM-G900T using Tapatalk
Playb3yond said:
I was, seems to be better than before. Just need to debload my stock rom and I'm set
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Could you verify bootloader version? I updated mine but bootloader stays at FOJ4 while everything else is FOL1.
Playb3yond said:
I was, seems to be better than before. Just need to debload my stock rom and I'm set
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
How were you able to root?
of coarse. flash twrp in odin, then download supersu2.66 and flash that. Rooted. It's very simple
how I managed to make the root?
Playb3yond said:
of coarse. flash twrp in odin, then download supersu2.66 and flash that. Rooted. It's very simple
Click to expand...
Click to collapse
hello have a galaxy s5 T-Mobile sm-g900t like that if it were possible postasse how he rootear your most detailed device if the model is the same as mine, have android 5.1.1 g900TUVS1FOL1 from already thank excuse my English'm from Brazil.
Hey gang!
I have the metropcs variant (G900t1) of the Galaxy s5. I downloaded the .tar file. I wiped my phone first (twice for good measure) and rebooted to download mode via TWRP. I *did* uncheck the auto reboot box because I hears odin acts funny around OTA's. After the reboot was done, my phone got stuck on he splash screen for a while. I popped out my battery.
for the record, not a noob but leery about regaining root using cf autoroot.
XDA, check me on this. I want to do this right. =)
I updated via Kies earlier this afternoon. So far it's very snappy.
modem
can someone post a flashable modem of this version?
yeshivabachur said:
can someone post a flashable modem of this version?
Click to expand...
Click to collapse
http://forum.xda-developers.com/tmo...t/how-to-update-to-g900tof6-5-1-1-pc-t3141404
zip flashable
lost_ said:
http://forum.xda-developers.com/tmo...t/how-to-update-to-g900tof6-5-1-1-pc-t3141404
Click to expand...
Click to collapse
sorry i meant a zip flashable through TWRP.
which brings me to this question.... better to do it through odin or through TWRP?
yeshivabachur said:
sorry i meant a zip flashable through TWRP.
which brings me to this question.... better to do it through odin or through TWRP?
Click to expand...
Click to collapse
look at the 1st post, its there
i flashed it with odin, works fine.

[Rom][H918] Stock & Debloated 10s flashable keeps root (UPDATED V2)

H918 10s stock rom​Warning: I am not responsible for anything that happens to your phone.​
Stock rom based on the latest January security patch
ABR 1 still
Tested on my on phone first
Please read before you flash
Instructions:​!Backup any data and make a TWRP recovery!
1. Download the H91810s.zip and put on your SD card
2. Download your preferred root method Magisk or SuperSU and also put on SD card
3. Boot into TWRP and clean or dirty flash H91810s.zip
4. YOU MUST FLASH YOUR PREFERRED ROOT METHOD (If skipped your phone will encrypt and will have to clean flash to see system in TWRP or you may come across other issues)
5.Check if you have flashed root (if you didn't, do it now! or else you could lose twrp)
6. Reboot
Optional:​7. Flash the best kernel mk2000
Download:​UPDATE: V2 has a modified boot with magisk so people should not lose root.
Stock
H91810sV2
Debloted
Debloated-H91810sV2 (Flash dirty/clean but FLASH ROOT also)
here is Weta Mods for anyone who wants thanks to @i95swervin
https://mega.nz/#!pegzgawZ!JwbE3bgo4...xAS1pSLMvwqNyc
If you enjoy
paypal.me/HassaanM
Credit:
Thanks To:
@McNutnut & @dimm0k for the update scripts & META-INF
@bullghost for the KDZ extractor.
@Tilde88 for the orginal updater-script.
@runningnak3d for some help and for keeping our hopes for root alive.
@askermk2000 for a amazing kernel.
Hit the thanks if you like it!
UPDATE:
Version 2 has been released with a magisk patched boot so people won't lose root as many are forgetting to flash root.
here is Weta Mods for anyone who wants thanks to @i95swervin
https://mega.nz/#!pegzgawZ!JwbE3bgo4...xAS1pSLMvwqNyc
Will this "factory reset" my phone if i "dirty flash" still? I mean will I lose my existing data on the phone and apps installed?' Thanks!
firstblud said:
Will this "factory reset" my phone if i "dirty flash" still? I mean will I lose my existing data on the phone and apps installed?' Thanks!
Click to expand...
Click to collapse
Nope I did a dirty flash and Don't forget to flash root.
Thanks dudeawesome. I'll be moving this to the front of my flashing queue. I just dirty flashed 10r and Magisk from 10j a couple of days ago and was planning on flashing mk2000, KCAL, Zachary's mods, and Magisk iYTBP this evening.
Hello. Thanks for offering this, dudeawsome. Any chance of a debloated version?
custommsp said:
Hello. Thanks for offering this, dudeawsome. Any chance of a debloated version?
Click to expand...
Click to collapse
I'll see what I can whip up!
You're the man!
dudeawsome said:
I'll see what I can whip up!
Click to expand...
Click to collapse
Would there be any issues running an older mk2000 kernel with 10s? I feel like I should wait on either this or mk2000 for now.
Currently on alpha ROM with Xposed. I know this doesn't have weta mods so my question is if dirty flash is OK? Also wanted to request if you have time for a deodexed version?️. Thanks for this easy update ?️?️
Snakecharmed said:
Would there be any issues running an older mk2000 kernel with 10s? I feel like I should wait on either this or mk2000 for now.
Click to expand...
Click to collapse
Nope no issues
custommsp said:
You're the man!
Click to expand...
Click to collapse
About to test debloated version is all goes well then I'll upload
Still_living714 said:
Currently on alpha ROM with Xposed. I know this doesn't have weta mods so my question is if dirty flash is OK? Also wanted to request if you have time for a deodexed version?️. Thanks for this easy update ?️?️
Click to expand...
Click to collapse
About to test debloated version and I say it should work but not 100% sure might need to wipe cache or clean for best bet
dudeawsome said:
About to test debloated version and I say it should work but not 100% sure might need to wipe cache or clean for best bet
Click to expand...
Click to collapse
Will there be anything else besides just being debloated?
Still_living714 said:
Will there be anything else besides just being debloated?
Click to expand...
Click to collapse
as of now nothing but maybe lookout for a new h918 rom coming
dudeawsome said:
as of now nothing but mybe lookout for a new h918 rom coming
Click to expand...
Click to collapse
Gotcha! V20 not dead yet ?️?️
Still_living714 said:
Gotcha! V20 not dead yet ️️
Click to expand...
Click to collapse
It's sad, this phone don't have that much deving going on anymore and I personally love phone (the nifty second screen features not found in any other phone makes me not understand...even LG was so confused they removed it...). Again sad that so many left it...
Well, thanks OP for bringing updates to rooted users we need it bad
theslam08 said:
It's sad, this phone don't have that much deving going on anymore and I personally love phone (the nifty second screen features not found in any other phone makes me not understand...even LG was so confused they removed it...). Again sad that so many left it...
Well, thanks OP for bringing updates to rooted users we need it bad
Click to expand...
Click to collapse
LG's great at following HTC's footsteps from five years ago in throwing a bunch of crap at the wall and seeing what sticks, only to abandon most of their power-user-friendly ideas in favor of becoming a generic also-ran that can't keep up with the Chinese, never mind Samsung. They've done one dumb thing after another starting with the G4 and they managed to get lucky once with the V20.
Even then, they still screwed up with the V20 by not selling it in Europe or marketing aggressively everywhere else when the irons (and the batteries) were hot. How the hell do you botch a product offering when your biggest competitor served lithium-ion flambé for that flagship's generation? LG Mobile is a three-ring circus.
Does this update the firmware as well (modem, bootloader, etc)?
Sent from my LG V20 using XDA Labs
NickWhit1992 said:
Does this update the firmware as well (modem, bootloader, etc)?
Sent from my LG V20 using XDA Labs
Click to expand...
Click to collapse
yes

Categories

Resources