Related
after installation: recovery-clockwork-touch-5.8.1.8-tf201.zip
think my tablet is broken: (
Do not start!
if I want to run in recovery mode (PWR + Vol-down)
I have just read:
Android cardhU-user bootloader ,2.10 e. relased by "WW_epad-9.4.2.15-20120221" A03
Booting recovery kernel image
and nothing more
tablet hangs on this screen
What can I do???
ADB device not found
only works : APX mode
How about fastboot?
Sent from my Transformer Prime TF201
How can I run mode fastboot?
I choose at startup:
recovery mode - pwr+vol-
APX mode - pwr+vol+
any other combination?
RMA is probably only
http://forum.xda-developers.com/showthread.php?p=22897771
There is no APX mode here. When booting with vol -/power, and doing nothing after, you must face a screen with three icons. You go on the middle icon with vol down and validate by volume up and you're in fastboot mode.
When booting with vol down + power then immediately after volume up then you boot in recovery mode.
Are you sure to do the right thongs?
the problem is that when booting with vol -/power, I've screen with "Booting recovery kernel image" and nothing more!!
I don't have with three icons
Zenk_77 said:
the problem is that when booting with vol -/power, I've screen with "Booting recovery kernel image" and nothing more!!
I don't have with three icons
Click to expand...
Click to collapse
have you tried the 1a option form the unbricking thread?
leime68 said:
have you tried the 1a option form the unbricking thread?
Click to expand...
Click to collapse
is not possible to connection by ADB,
PC does not see the TF201 in Device Manager, and it is not a issue drivers
Zenk_77 said:
is not possible to connection by ADB,
PC does not see the TF201 in Device Manager, and it is not a issue drivers
Click to expand...
Click to collapse
I think you hard bricked your tp
but how did you brick you tp?
after installation recovery-clockwork-touch-5.8.1.8-tf201.zip
Sent from my Sensation using xda
Zenk_77 said:
after installation recovery-clockwork-touch-5.8.1.8-tf201.zip
Sent from my Sensation using xda
Click to expand...
Click to collapse
did you install It via adb?
No,
From CWM 5.5.0.4
Sent from my Sensation using xda premium
have you tried to install the drivers in apx mode?
Yes,
APX it works very well, but nothing can do about it.
When booting, are you trying to boot into recovery or is it automatically booting to recovery.
After flashing the recoveries that Roach has in his thread, you have to let the tablet try to boot normally. This is the point at which the recovery is actually flashed.
When you flash the zip it puts the files to the staging partition and then when you boot normally the staging partition flashes the new recovery.
I hope that all makes sense.
Basically if you haven't tried to boot normally since flashing the zip, then the flash process has not yet completed.
Well, I had the same problem today... and am in the same situation... rebooted the system after flashing and it just sits at the screen trying to boot into recovery... Can get into APX but not into recovery or Fastboot.
I guess I either send it in for service, or wait for NVFLasher.
Well after some long conversation with Asus, basically it is bricked. I can send it to them at my expense and they will give me a quote on repair. They said according to their records my serial number has the bootloader unlocked and is therefor off warranty.
This is true, but I just wanted to offer an update on my situation..
great , i think i did the same thing
can you pass me the contact?
i can't get into fastboot mode by pressing the volume up+down+power buttons
i have to install a custom rom and i am stuck here only. help
is there any other way to get into fastboot mode cause i'm really getting frustrated here
What phone? I'm on Tapatalk and I can't see which...
Sent from my Nexus 4 using Tapatalk 2
nexus 4
thanks i figured it on my own
Hi. My galaxy note is getting stuck on boot screen.
To begin with I was using Android Jelly Bean 4.2.1 and had rooted my phone with CWM 6.0.3.1. Then I used it to flash CynogenMod 9.1. Then I used it to flash CM 10.2 . After this when I tried to reboot in recovery mode by pressing volume up+home+power, phone didn't go into recovery instead it just did a normal reboot. Then I enabled advanced reboot option by enabling developer developer setting and selected recovery option after pressing power button and selecting reboot.This time the phone restarted but neither went into recovery nor did a normal reboot. Instead it got stuck on galaxy note logo screen and that's the way it's till now.
It tries to reboot when I press either volume up+home+power or just power button but keeps getting stuck. It does go into download mode though when I press Volume down+home+power.
Someone please let me know what should I do to go back to safety. This is the first time I am trying to do any kind if rooting/flashing stuff.
Thanks.
saurabhraj1947 said:
Hi. My galaxy note is getting stuck on boot screen.
To begin with I was using Android Jelly Bean 4.2.1 and had rooted my phone with CWM 6.0.3.1. Then I used it to flash CynogenMod 9.1. Then I used it to flash CM 10.2 . After this when I tried to reboot in recovery mode by pressing volume up+home+power, phone didn't go into recovery instead it just did a normal reboot. Then I enabled advanced reboot option by enabling developer developer setting and selected recovery option after pressing power button and selecting reboot.This time the phone restarted but neither went into recovery nor did a normal reboot. Instead it got stuck on galaxy note logo screen and that's the way it's till now.
It tries to reboot when I press either volume up+home+power or just power button but keeps getting stuck. It does go into download mode though when I press Volume down+home+power.
Someone please let me know what should I do to go back to safety. This is the first time I am trying to do any kind if rooting/flashing stuff.
Thanks.
Click to expand...
Click to collapse
OK, so this device we do not use HOME button to get recovery.
Volume up/down and power. Once vibrate , let go power and still hold volumes until recovery comes
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Maybe he haz Note 2?
Sent from my SGH-I717 using Tapatalk 4
Bubbajoe40356 said:
Maybe he haz Note 2?
Sent from my SGH-I717 using Tapatalk 4
Click to expand...
Click to collapse
Mehbeh! ( insert fat bastard here )
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
captemo said:
Mehbeh! ( insert fat bastard here )
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
I have the international version of note i.e GT-N7000 actually. I posted this issue here as I couldn't find correct forum at that time. Though have posted it to N7000 forum now @ http://forum.xda-developers.com/showthread.php?p=44977074#post44977074
(I have discovered now that posting duplicate threads violates rules )
But anyways I am unable to boot into recovery even by pressing buttons mentioned by you. I am thinking of flashing Philz CWM6 kernal using ODIN through download mode and then flashing CM10.2(or CM10.1 if the problem lies with CM10.2).
I had flashed Philz CWM6 kernal before flashing with CM 9.1. But after CM 9.1 was flashed I think it replaced Philz touch recovery with its own recovery. After that I flashed CM 10.2 with this recovery. Now I don't know if CM10.2 is the problem or the recovery which overwrote Philz recovery
I hope I get an answer to what went wrong so as to be wiser when flashing a new ROM next time.
I am new to android and hacking.
I am using a Micromax Canvas Nitro A310 phone which is a rebranded Coolpad F1 8297w. In my haste and excitement I installed a YunOs ROM. That led to my bootsplash being replaced by another image.
While trying to fix that I corrupted my recovery and have been unable to get into recovery since.
I used adb sideload to flash a zip file after which I can no longer boot into recovery.
My current OS is a KitKat based Hive UI for Xolo phones. Its an AOSP ROM with good battery backup so I still have a working phone.
Also, I was playing with themer launcher and that seems to have altered some setting as my home button is no longer working.
So, I have three issues and hope that they are not inter related.
1. Altered Bootsplash.
2. Unable to get into recovery.:banghead:
3. Home button not working.
I have tried various steps to fix the most important issue (2) here.
1. Tried flashing recovery from within the device. Doesn't work as neither CWM nor TWRP have released stable recoveries for my device. Flashify and ROM manager don't work either.
2. Fastboot mode (boot loader). I can get my device into fastboot mode but, my PC doesn't recognize the device. I am confused as to which drivers to install. MMX A310 or CoolpadF1 or Xolo 8x1000 which is the name I get when I connect my phone to PC in normal MTP mode.
I have come to the conclusion that first I need to flash a stable recovery using boot loader. For that I need help.
Also in Windows device manager under other devices MTK65xxx is showing. The drivers weren't digitally signed so I disabled that in windows 8.1.
Fastboot still doesn't recognize my device.
Senior devs please guide me through (2) as it is imperative to solve. The rest can wait.
Sent from my 8x-1000 using XDA Free mobile app
So I figured out the home button problem. I had installed themer and it messed with the default action of home button.
My Solution was.
1. Installed Nova Launcher.
2. Nova Settings.
3. Buttons and Notifications.
4. Home button.
5. Set home button action to default screen. Additionally check the option for action (long press).
And done. Everything is back to default which is good.
Sent from my 8x-1000 using XDA Free mobile app
hi everyone i have a problem with getting into LG G2 mini recovery mode
i can't access to that mode
i try to use adb by writing 'adb reboot recovery' . my device rebooting bot it stock on photo of android fail .
by the way i have l g2 mini D618 . lolipop 5.0.1
and i want to install cyanogenmod 13
so how do i fix this problem . and is there is any way to install cyanogenmod 13
ty
have you correctly flashed the twrp 3.0? even if you have, try reflashing it with flashify. and boot into it by powering off, then hold both the power button and volume down until you see the lg logo, then release the power button while holding volume down, and press power again. keep holding both until you get to the factory reset menu, navigate to yes 2 times and voila, you are in recovery
bombaglad said:
have you correctly flashed the twrp 3.0? even if you have, try reflashing it with flashify. and boot into it by powering off, then hold both the power button and volume down until you see the lg logo, then release the power button while holding volume down, and press power again. keep holding both until you get to the factory reset menu, navigate to yes 2 times and voila, you are in recovery
Click to expand...
Click to collapse
thanks men . but i didn't flash my phone before . and the lolipop 5.0.1 it's origin from the factory .
when i do your instructor -> it didn't work . what happen is this
when i get in factory reset menu . i press yes 2 times . now the phone delete all data from my phone and restart . but he didn't take me to the recovery mode ...
jonasess said:
thanks men . but i didn't flash my phone before . and the lolipop 5.0.1 it's origin from the factory .
when i do your instructor -> it didn't work . what happen is this
when i get in factory reset menu . i press yes 2 times . now the phone delete all data from my phone and restart . but he didn't take me to the recovery mode ...
Click to expand...
Click to collapse
You can't access stock recovery with the hardware key combination.
You have unlock your bootloader and flash a custom recovery.
Sent from my LG G2 Mini using XDA Labs
oh man there is no stock recovery on the g2 mini which can flash cm13... first look up here on xda how to unlock your bootloader, then flash twrp and then you can access it with the button combination i described
Vagelis1608 said:
You can't access stock recovery with the hardware key combination.
You have unlock your bootloader and flash a custom recovery.
Sent from my LG G2 Mini using XDA Labs
Click to expand...
Click to collapse
how can i unlock bootloader ??
i have lg g 2 mini D618 . running the original lolipop from lg 5.0.2
how can i root my device and unlock bootloader to go to the recovery mode??
bombaglad said:
oh man there is no stock recovery on the g2 mini which can flash cm13... first look up here on xda how to unlock your bootloader, then flash twrp and then you can access it with the button combination i described
Click to expand...
Click to collapse
i couldn't find a good solution can you help me pls
as i said before i have lg g2 mini D618 . running original lolipop
when i buy my device . he was running kitkat 4.4.2 . after that lg sent to me update for lolipop 5.0.2
finally it works . thanks guys