[ROM][AOSP][Nightly/Release] CarbonROM Lollipop [MT2L03] - Huawei Ascend Mate 2

About Carbon
CarbonRom is an aftermarket firmware based on the Android Open Source Project and CyanogenMod. We are dedicated to fast, stable, and feature-filled ROMs, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look at, build, and use our code on CarbonROM GitHub. and on our Gerrit CarbonROM Gerrit.
We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.
Special thanks also go to Slim Rom for some of their features, PA, AOKP, and anyone else we may have borrowed commits from that hasn't been mentioned here. If you feel you have been unfairly left out, please - let us know.
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in #teamcarbon on freenode IRC.
Features
All of our features can be found on our site here:
Carbon Features
Here are some screenshots:
Carbon Screenshots
Carbon Updates
Join us on these Social Media Channels to keep yourself up-to-date on all the latest Carbon news, updates, contests, and more! Join our completely open Google+ community for insider conversation with devs and other users.
Download Carbon
All Carbon downloads and further information such as features, changelog, and FAQ can be found on our website.
Carbon Downloads
Support
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Ask a question on our IRC channel. Connect to #teamcarbon on irc.freenode.net or click here. You'll find several other Carbon fans and usually one or more devs as well. Please be polite.
Who is Team Carbon?
Find out here:
Carbon Team
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
​
XDA:DevDB Information
CarbonROM, ROM for the Huawei Ascend Mate 2
Contributors
CarbonDev, mdmower, patrickc, pb
Source Code: http://github.com/carbonrom
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: AOSP / CyanogenMod
Version Information
Status: Nightly
Created 2015-08-26
Last Updated 2015-08-25

Reserved

Very nice!!!

Mods: Please close this thread, it had mistakes in posting that we had to make a new thread for.
NEW THREAD: http://forum.xda-developers.com/ascend-mate2/orig-development/rom-carbonrom-lollipop-t3186646

Related

[ROM][AOSP][Nightly/Release] CarbonRom KitKat [i9100]

About Carbon
CarbonRom is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look at, build, and use our code on CarbonDev GitHub. and on our Gerrit CarbonDev Gerrit.
We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.
Special thanks also go to Slim Rom for some of their features, PA, AOKP, and anyone else we may have borrowed commits from that hasn't been mentioned here. If you feel you have been unfairly left out, please - let us know.
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in #teamcarbon on freenode IRC.
Features
All of our features can be found on our site here:
Carbon Features
Here are some screenshots:
Carbon Screenshots
Carbon Updates
Join us on these Social Media Channels to keep yourself up-to-date on all the latest Carbon news, updates, contests, and more! Join our completely open Google+ community for insider conversation with devs and other users.
Download Carbon
All Carbon downloads and further information such as features, changelog, and FAQ can be found on our website.
Carbon Downloads
Changelog
For a detailed changelog, check out the changes made each night here:
Carbon Changelog
Support
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Ask a question on our IRC channel. Connect to #teamcarbon on irc.freenode.net or click here. You'll find several other Carbon fans and usually one or more devs as well. Please be polite.
Who is Team Carbon?
Find out here:
Carbon Team
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
​
XDA:DevDB Information
[ROM][AOSP][Nightly/Release] CarbonRom KitKat [i9100], ROM for the Samsung Galaxy S II
Contributors
CarbonDev, Myself5
ROM OS Version: 4.4.x KitKat
Based On: AOSP
Version Information
Status: Beta
Created 2014-02-14
Last Updated 2014-06-07
Reserved
Reserved
Hello Guys.
I'm your i9100 device maintainer.
I meanwhile tweaked the Rom specially for the i9100 so its difference to our other devices is:
Compiled using SaberMod arm-eabi 4.7 (Kernel code) and SaberMod arm-linux-androideabi 4.8 (ROM code) toolchain compilers
Cross-compiled using those custom toolchains results in a more smoother, faster, and battery friendly ROM
F.A.Q.:
What is Toolchain?
In software, a toolchain is the set of programming tools that are used to create a product (typically another computer program or system of programs). The tools may be used in a chain, so that the output of each tool becomes the input for the next, but the term is used widely to refer to any set of linked development tools.
A simple software development toolchain consists of a compiler and linker to transform the source code into an executable program, libraries to provide interfaces to the operating system, and a debugger. A complex product such as a video game needs tools for preparing sound effects, music, textures, 3-dimensional models, and animations, and further tools for combining these resources into the finished product.
Click to expand...
Click to collapse
Source: http://en.wikipedia.org/wiki/Toolchain
What is SaberMod?
The term "SaberMod" is coming from:
SaberMod is a AOSP based ROM with some extra features added in and mostly from CyanogenMod. SaberMod started out pure AOSP when android 4.2.1 launched. Originally it was pure AOSP with a few extra features I ported over from CyanogeMod and linaro optimizations. Then I rebased everything off of rasbeanjelly because I liked many features found in rasbean. Since then I've modified a lot of the code so not much of it is rasbeanjelly based anymore. But you will still find some commonly used features found in rasbeanjelly. SaberMod is not a rasbeanjelly or CM clone, or KANG. Custom kernels are included for certain devices when available. These are personal builds we make for ourselves and originally became very popular in the nexus 7 forums. Features are very rarely added, and are built to SaberMod's team members liking. Currently there are two members of SaberMod working on this project. Myself and @jarjar124. Please understand our time is limited and we are only two people who have lives, and do not have 25-50 members like CyanogenMod to add things. And our goal is not to add a bunch of features that bloat the system of the ROM.
Click to expand...
Click to collapse
Source: http://forum.xda-developers.com/show....php?t=2158698
About GCC main compiler cflags
-O1
Optimize. Optimizing compilation takes somewhat more time, and a lot more memory for a large function. With -O, the compiler tries to reduce code size and execution time, without performing any optimizations that take a great deal of compilation time.
-O2
Optimize even more. GCC performs nearly all supported optimizations that do not involve a space-speed tradeoff. As compared to -O, this option increases both compilation time and the performance of the generated code. -O2 turns on all optimization flags specified by -O.
-O3
Optimize yet more. -O3 turns on all optimizations specified by -O2 and also turns on the -finline-functions, -funswitch-loops, -fpredictive-commoning, -fgcse-after-reload, -ftree-loop-vectorize, -ftree-slp-vectorize, -fvect-cost-model, -ftree-partial-pre and -fipa-cp-clone options.
-Os
Optimize for size. -Os enables all -O2 optimizations that do not typically increase code size. It also performs further optimizations designed to reduce code size.
Click to expand...
Click to collapse
Greetings
Myself5
Nice Work Dude !
Mine
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Whats Up Whith "Mine" ?
great ...thanks ....will try it surly
Great!! carbon finally arrived gonna try
Sent from my GT-I9100 using Tapatalk
im not able to see the download link in carbon page, i select our device but the links to download the ROM doesnt appear, can someone share the download link?
attack11 said:
im not able to see the download link in carbon page, i select our device but the links to download the ROM doesnt appear, can someone share the download link?
Click to expand...
Click to collapse
I have found that this link:
http://carbon-rom.com/downloads/?device=i9100&type=nightly&country=US
Showing some dates but still no luck with working link...
Послато са GT-I9100 уз помоћ Тапатока
Will this rom contain the tweaks/things that Myself5 added to his unofficial build?
It seems like we're currently having some issues with our download page getting accessed by mobile browsers. Please use your computer to download until we fixed it.
@GreekBlood: All in all the most tweaks I made were coommits from gerrit, so sooner or later they will be included
http://carbon-rom.com/downloads/?device=i9100&type=nightly&country=BE
Here i can see the downloads perfectly and they also work.
And here is the latest nightly for our SII :> http://eu1.dl.carbon-rom.com/files/i9100/nightly/CARBON-KK-NIGHTLY-20140215-0148-i9100.zip
congrats myself5 on getting to be the maintainer for this great rom on our s2.
i think i will just dl from the official carbon page,and then just use the updater to get all the improvements and fixes moving forward!!
well first hour whit this rom.and everything seems good after all! just one question,how i can enable wheater widget in the lockscreen? i cant find an option..
also some translations are missing (in spanish) i can help if you want.
also another question Halo will be added on the future?
i flashed newest rom all good.kernel included is not compatible with stweaks.
I plan on flashing gustavo 2\09 kernel.
will nightly updates flash a another kernel each update??
thnx
A little problem
I have a little problem,when i try to install gapps it says that i have insufficient space. How would i fix that? I`m using PA-GOOGLE APPS (FULL MODULAR PACKAGE) .
And another question. Previous versions that were unofficial had TWRP, how could I get that back too?
@attack11 the Weather Widget is called cLock. HALO will be added it just has some small bugs ATM we need to fix. Thanks for your help, I will later PM you all files you need to translate.
@saskrider: It will flash a new Kernel every Update. However when you later (as soon as it's working) use CarbonDelta to update there will be a option to add Custom Zip's to flash after the Rom (like GApps and Custom Kernels)
@Pecka40: the S2's Sytem Partition is to small for these GApps, use some smaller ones
Greetings
Myself5
Sent from my GT-I9100 using Tapatalk
Myself5 said:
@attack11 the Weather Widget is called cLock. HALO will be added it just has some small bugs ATM we need to fix. Thanks for your help, I will later PM you all files you need to translate.
@saskrider: It will flash a new Kernel every Update. However when you later (as soon as it's working) use CarbonDelta to update there will be a option to add Custom Zip's to flash after the Rom (like GApps and Custom Kernels)
@Pecka40: the S2's Sytem Partition is to small for these GApps, use some smaller ones
Greetings
Myself5
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply! And there is no way of making it bigger?
And could you please answer the other question. About how can I get TWRP on it.

[Rom][Unofficial][KitKat]Carbon Rom 4.4.2 based on CM11.0 [TEST BUILD]

About Carbon​
CarbonRom is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look at, build, and use the code on CarbonDev GitHub. and on our Gerrit CarbonDev Gerrit.
We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.
Special thanks also go to Slim Rom for some of their features, PA, AOKP, and anyone else we may have borrowed commits from that hasn't been mentioned here. If you feel you have been unfairly left out, please - let us know.
Features
All of our features can be found on the site here:
Carbon Features
Carbon Updates
Join us on these Social Media Channels to keep yourself up-to-date on all the latest Carbon news, updates, contests, and more! Join our completely open Google+ community for insider conversation with devs and other users.
Download Carbon
Carbon Rom V0.1
Gapps
Ultra Slim Gapps
Instructions
* Download the ROM and GApps
* Reboot to recovery (Philz or CWM 6.0.4.8 only )
* Wipe data/factory reset
* Flash the ROM and then GAapps
* Reboot your phone
* Enjoy
What works:
- Network for phone calls (useless since no audio)
- Mobile data
- WiFi
- Sensors
- GPS
Bugs
1. No hwcomposer
2. SystemUI FC when msim is turned on
3. No Audio
4. No Bluetooth
5. No camera
4. FM and all other bus on CM11
THIS IS A WIP.
Changelog
For a detailed changelog, check out the changes made each night here:
Carbon Changelog
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon and my other roms better with every release. Your support means the world to us! If you've enjoyed Carbon and my other roms, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon and my other roms!
Credits
@chrmhoffmann - for his MT6589 device tree and hacks
@Dr-Shadow - for MT6589 patches
@Xplodwild and OmniROM team for their hard work
Special thanks to Carbon ROM developers
Source:
1. Rom Source : https://github.com/CarbonDev
2. Kernel Source : https://github.com/kashifmin/KashKernel_4.2
XDA:DevDB Information
Carbon Rom 4.4.2 based on CM11.0, ROM for the Micromax A116
Contributors
kashifmin
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2014-05-21
Last Updated 2014-05-21
Reserved
Screenshots
This is a test buid. I will update this once I get all the patches from CM11.
Check attachment for screenshots!
woahh!! you are a machine bro!!
The rom building king kashif
Good work bro
Theirs a lot to learn from you
Awesome love it
this project looks interesting. btw, is that "Ultra Slim Gapps" package meant only for this rom or can it be used on other stock/aosp roms? to be frank, the "slim gapps" term is very appealing.
You can use slim gapps on any ROM but android version should be same.
Good to see new improvements for CHD… Hoping sooner we will taste complete cm… keep it cmg bro
Sent from my Moto G using Tapatalk
Looking forward to this getting updated
Keep up the good work!!!! @kashifmin
When this will be updated. I eagerly waiting to use it . Apart from Bluetooth cm11 0.8 has fixed almost all bugs. When will carbon rom get updated.Any time frame bro?
Sent from my CM11 v 0.8 by kashifmin for A116 using xda premium
system ui updates here
http://forum.xda-developers.com/showpost.php?p=68904070&postcount=464

CarbonRom KitKat

CarbonRom KitKat
About Carbon
CarbonRom is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.
Special thanks also go to Slim Rom for some of their features, PA, AOKP, and anyone else we may have borrowed commits from that hasn't been mentioned here. If you feel you have been unfairly left out, please - let us know.
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in #teamcarbon on freenode IRC.​
Download Carbon
Download
​
Changelog
For a detailed changelog, check out the changes made each night here:
Carbon Changelog​
Bugs
The torch shortcut wont work when screen is off (Draw V)​
Credits
@ak - For Kernel - Github
@CarbonDev - For ROM Source - Github
@SlimRoms - For Device Source - Github
Finally my sources can be found - Github​
XDA:DevDB Information
CarbonRom KitKat , ROM for the ONEPLUS ONE
Contributors
deedwar
Version Information
Status: Beta
Created 2014-09-08
Last Updated 2014-09-08
Looking forward to giving this ROM a shot, thanks for your time!
Added to the OnePlus Index thread here:
[INDEX] OnePlus One Resources Compilation Roll-Up
Transmitted via Bacon
Tracking this now
Looks good. Much appreciated.

[ROM][6.0.1][MOB30M][Alpha] Official Slim6 - mako

SlimRoms is a custom android operating system. Our main goal is to offer users a slimmed down yet feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by our public Gerrit to submit patches of any type.
Slim6 is the project name for SlimRoms based on Android 6.0.1 Marshmallow and offers the following original features:
Slim6 is still in its early stages of development so if your favourite feature is not back yet, don’t worry more will be added with later releases.
SlimLauncher
An Open source, feature filled launcher! -More fun than you can shake a stick at.
Important links:
slimroms.org - Our official website and your source for anything SlimRoms related.
Downloads - Slimify your device!
Installation instructions - Follow these steps if you want SlimRoms on your device.
FAQ - Have a question? Consider reading our FAQ first, you might find your answer there!.
Report-bugs - Found a bug? Send it our way!
Kernel Source - The source of your device's kernel.
Get in touch! - You can contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Disclaimer: We are not responsible for any damages to your device.
XDA:DevDB Information
Slim6, ROM for the Google Nexus 4
Contributors
prbassplayer
Source Code: https://github.com/SlimRoms
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSP, CAF, CyanogenMod
Version Information
Status: Testing
Created 2016-06-22
Last Updated 2016-06-22
déja vu?
Why there are two threads of slim6?
Thanks for such a great rom .loving it since 2013 .slim team you are the best.

[ROM][10][UNOFFICIAL][GAUGUIN]MoKee Open Source Android Project

MoKee Open Source is the biggest non-profit Android Open Source development team in China, with members from all parts of the world. We follow the latest development from Google closely and improve various parts of Android according to the user habits. Being a non-profit organisation, we utilise our spare time and own funds to keep this passion alive. Therefore, the costs for the forum and servers are solely beared by us. In order to provide a good user experience, we only included a few preinstalls in the ROM. Along with the advertisements in the forum; we hardly get enough to pay for the bandwidth. The point is, those are our only source of income, however many developers choose to exclude them when releasing unofficial builds. Unlike CyanogenMod, we did not accept monetary help at the early stages, as in China, most people do not understand the meaning of “making a donation”. They would think of it as buying a service, which is conflicting with our objectives. Anyways, we still made it until today, and even started to provide third party developers a chance to utilise our OTA system. All of these are the fruit of our hard work and passion. We are proud of the happy users, and we are also proud of the support given to MoKee Open Source. Most importantly, we are proud of the improvements we have achieved all these while, and the advancements never stop.
What's working:
Almost everything
Known issues:
SELinux is permissive
You tell me
Instructions:
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Wipe Data/Cache
4. Flash the ROM
5. Flash TWRP installer ZIP
6. Reboot to Recovery
7. Flash GApps
8. Flash Magisk (Optional)
9. Reboot to System
Downloads:
Google Drive
MEGA
Source:
Kernel Source code: None, prebuilt kernel
Device Source code : mkq-mr1
ROM Source code: Mokee Source Code
Credits:
DtHnAme
Mokee Development Team
LineageOS
Big Thanks:grewal
Version Information:
Android Version: 10
Status: Unofficial
Last updated: 2021-03-10
DtHnAme said:
MoKee Open Source is the biggest non-profit Android Open Source development team in China, with members from all parts of the world. We follow the latest development from Google closely and improve various parts of Android according to the user habits. Being a non-profit organisation, we utilise our spare time and own funds to keep this passion alive. Therefore, the costs for the forum and servers are solely beared by us. In order to provide a good user experience, we only included a few preinstalls in the ROM. Along with the advertisements in the forum; we hardly get enough to pay for the bandwidth. The point is, those are our only source of income, however many developers choose to exclude them when releasing unofficial builds. Unlike CyanogenMod, we did not accept monetary help at the early stages, as in China, most people do not understand the meaning of “making a donation”. They would think of it as buying a service, which is conflicting with our objectives. Anyways, we still made it until today, and even started to provide third party developers a chance to utilise our OTA system. All of these are the fruit of our hard work and passion. We are proud of the happy users, and we are also proud of the support given to MoKee Open Source. Most importantly, we are proud of the improvements we have achieved all these while, and the advancements never stop.
What's working:
Almost everything
Known issues:
SELinux is permissive
You tell me
Instructions:
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Wipe Data/Cache
4. Flash the ROM
5. Flash TWRP installer ZIP
6. Reboot to Recovery
7. Flash GApps
8. Flash Magisk (Optional)
9. Reboot to System
Downloads:
Google Drive
MEGA
Source:
Kernel Source code: None, prebuilt kernel
Device Source code : mkq-mr1
ROM Source code: Mokee Source Code
Credits:
DtHnAme
Mokee Development Team
LineageOS
Big Thanks:grewal
Version Information:
Android Version: 10
Status: Unofficial
Last updated: 2021-03-10
Click to expand...
Click to collapse
Hey, any screenshots?
Why it is so hard for all to put some screenshots. Credits, Instructions, bla bla... but never screenshots
zlatko63 said:
Why it is so hard for all to put some screenshots. Credits, Instructions, bla bla... but never screenshots
Click to expand...
Click to collapse
Because maybe ia this project dead
DtHnAme said:
MoKee Open Source is the biggest non-profit Android Open Source development team in China, with members from all parts of the world. We follow the latest development from Google closely and improve various parts of Android according to the user habits. Being a non-profit organisation, we utilise our spare time and own funds to keep this passion alive. Therefore, the costs for the forum and servers are solely beared by us. In order to provide a good user experience, we only included a few preinstalls in the ROM. Along with the advertisements in the forum; we hardly get enough to pay for the bandwidth. The point is, those are our only source of income, however many developers choose to exclude them when releasing unofficial builds. Unlike CyanogenMod, we did not accept monetary help at the early stages, as in China, most people do not understand the meaning of “making a donation”. They would think of it as buying a service, which is conflicting with our objectives. Anyways, we still made it until today, and even started to provide third party developers a chance to utilise our OTA system. All of these are the fruit of our hard work and passion. We are proud of the happy users, and we are also proud of the support given to MoKee Open Source. Most importantly, we are proud of the improvements we have achieved all these while, and the advancements never stop.
What's working:
Almost everything
Known issues:
SELinux is permissive
You tell me
Instructions:
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Wipe Data/Cache
4. Flash the ROM
5. Flash TWRP installer ZIP
6. Reboot to Recovery
7. Flash GApps
8. Flash Magisk (Optional)
9. Reboot to System
Downloads:
Google Drive
MEGA
Source:
Kernel Source code: None, prebuilt kernel
Device Source code : mkq-mr1
ROM Source code: Mokee Source Code
Credits:
DtHnAme
Mokee Development Team
LineageOS
Big Thanks:grewal
Version Information:
Android Version: 10
Status: Unofficial
Last updated: 2021-03-10
Click to expand...
Click to collapse
Will it be this ROM with Android 11 , i found it as GSI but don't know how to install it
DtHnAme said:
MoKee Open Source is the biggest non-profit Android Open Source development team in China, with members from all parts of the world. We follow the latest development from Google closely and improve various parts of Android according to the user habits. Being a non-profit organisation, we utilise our spare time and own funds to keep this passion alive. Therefore, the costs for the forum and servers are solely beared by us. In order to provide a good user experience, we only included a few preinstalls in the ROM. Along with the advertisements in the forum; we hardly get enough to pay for the bandwidth. The point is, those are our only source of income, however many developers choose to exclude them when releasing unofficial builds. Unlike CyanogenMod, we did not accept monetary help at the early stages, as in China, most people do not understand the meaning of “making a donation”. They would think of it as buying a service, which is conflicting with our objectives. Anyways, we still made it until today, and even started to provide third party developers a chance to utilise our OTA system. All of these are the fruit of our hard work and passion. We are proud of the happy users, and we are also proud of the support given to MoKee Open Source. Most importantly, we are proud of the improvements we have achieved all these while, and the advancements never stop.
What's working:
Almost everything
Known issues:
SELinux is permissive
You tell me
Instructions:
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Wipe Data/Cache
4. Flash the ROM
5. Flash TWRP installer ZIP
6. Reboot to Recovery
7. Flash GApps
8. Flash Magisk (Optional)
9. Reboot to System
Downloads:
Google Drive
MEGA
Source:
Kernel Source code: None, prebuilt kernel
Device Source code : mkq-mr1
ROM Source code: Mokee Source Code
Credits:
DtHnAme
Mokee Development Team
LineageOS
Big Thanks:grewal
Version Information:
Android Version: 10
Status: Unofficial
Last updated: 2021-03-10
Click to expand...
Click to collapse
Will we get Android 10?

Categories

Resources