Can someone help? Been searching the internet for over 24 hours for a solution and I can't seem to find one.
I was attempting to flash Android lollipop kdz on my G2 mini, but I accidentally closed it because the language was in Korean and now my phone doesn't work.
It only boots into download mode, and when I connect it to my computer it recognizes as a MTP USB device and attempts to install drivers but fails immediately.
Theoretically if I can get it to recognize on the computer as a com port I can flash stock on it and it should be fine, but I have no clue how and I'm afraid to fiddle with the flashing tool to make matters worse.
Can anyone tell me what can I do please? Any more info you need ill be happy to provide.
Related
Hi guys, I believe I have hard bricked my phone.
I was trying to solve the IMEI lost by installing these bins files (www movilesdualsim dot com/threads/ayuda-con-i9500-s4-with-mtk6589-quad-core-5-0-screen-1920-1080.47124/) using SP_Flash_Tool_v3.1304.0.119, so I was doing so and when SPFlash has finished the phone doesn't boot up anymore. I have tried to flash recovery.img with SP Flash but it doesn't even detect the phone anymore.
When I connect the phone to the PC by USB cable I can heard the connected device sound going on and off and looking the windows device manager I can see a "Alcatel Single RNDIS Interface" device connected but like I said it goes on and off every 5 seconds or so. If I put the battery on the phone it doesn't make any different.
I would appreciate so much if anyone could help me out. I don't usually bother people asking for help but I can't really find how to fix this issue and I don't know if it is even possible to fix it.
Thank in advance
pepeg said:
Hi guys, I believe I have hard bricked my phone.
I was trying to solve the IMEI lost by installing these bins files (www movilesdualsim dot com/threads/ayuda-con-i9500-s4-with-mtk6589-quad-core-5-0-screen-1920-1080.47124/) using SP_Flash_Tool_v3.1304.0.119, so I was doing so and when SPFlash has finished the phone doesn't boot up anymore. I have tried to flash recovery.img with SP Flash but it doesn't even detect the phone anymore.
When I connect the phone to the PC by USB cable I can heard the connected device sound going on and off and looking the windows device manager I can see a "Alcatel Single RNDIS Interface" device connected but like I said it goes on and off every 5 seconds or so. If I put the battery on the phone it doesn't make any different.
I would appreciate so much if anyone could help me out. I don't usually bother people asking for help but I can't really find how to fix this issue and I don't know if it is even possible to fix it.
Thank in advance
Click to expand...
Click to collapse
Hi, you solved your problem? I have the same issue, help me
Hello everyone i need help!
I have LG G3 Sprint(LS990), its a long story how i get into this problem so ill be short.
I flashed my phone few times and got bricked my phone. now i stuck on LG logo loop it continuously shows me LG logo. Recovery and Download modes not working anymore so i cant flash a ROM right now. after few days of researching i find the way how to make download mode work with laf.img i got everything i need LG driver installed , adb installed on my computer and i got that laf.img for lg g3 ls990 the only problem right now i have is that i can't connect my LG phone to PC, windows doesn't see any changes in device manager when i connect cable.
So here is the question: how can i make my Phone connect to PC while im stuck in fastboot. (i already tried few different Windows PC and Linux also used 5 different cables starting from original one end with other phone cables but still can't make my LG get connected to PC so i can flash a laf.img file to make my download mode work. If you have any other solution ill be happy to accept and try it. Hope for quick response, as its the only phone i got at the moment and its been a few days already that i don't have phone, so my friends start think that im dead or lost already
P.S sorry for poor English
Never could resolve it?
Hi people.
I am very sad , hopeless, I searched all the internet and can't fix the mistake i've done. If anyone know how to help me or have any idea I really apreciate.
So, this is what happened:
I live in Brazil and have a D855 LG G3.....I was trying to go back to stock on my LG G3, so i searched the internet about flashing .KDZ files via download mode and did it. But.... i was stupid, and installed the D858HK model KDZ. This is a Korean model of the G3, with DUAL SIM....
So, the system was installed, I thought everything was fine... But when I start to setup the phone I realized that it was not ok.
This is what is happening:
- It does not detect my SIM.... no signal at all... So, no internet from the SIM
- The wi-fi doesn't work. It keeps "turning on wi-fi" and nothing happens.
- My phone is not detected via USB... I tried to install and uninstall the LG drivers thousand times... but when I plug my phone in the PC via USB it just charges, and give me no option to change that.
- Download mode doesn't work because my phone is not detected via USB. I can go in download mode on the phone, but the software (LGUP, LG flashtool, Odin) doesn't "see" my phone, doesn't recognize it.
- I have now stock recovery, unrooted phone, with no internet, no USB connection....
I think that wifi, SIM, and USB are not working because i installed a 858HK kdz on a 855 phone.
Is there any way to get out of this, or I just lost my phone???
Apreciate ANY help! Thankss
up
up
up
Hello! So a while ago I bought a Cubot x9 and it was a really good phone. Recently i haven't been able to do anything with it due too I tried to root it and it bugged out so I reinstalled the rom on it and it fixed it for a while but now it won't even show that it's powering on or even charging. I tried connecting it too my pc to see if i could use odin too reset it but it's not displaying on any of the com ports. I'm curious if theres anything i can do for it. I have a newer and better phone now so i dont really need it but it would be nice to try to fix it or(In the case of my tablet) Fully modify it so nothing on it is stock on it.
Cloak2131 said:
Hello! So a while ago I bought a Cubot x9 and it was a really good phone. Recently i haven't been able to do anything with it due too I tried to root it and it bugged out so I reinstalled the rom on it and it fixed it for a while but now it won't even show that it's powering on or even charging. I tried connecting it too my pc to see if i could use odin too reset it but it's not displaying on any of the com ports. I'm curious if theres anything i can do for it. I have a newer and better phone now so i dont really need it but it would be nice to try to fix it or(In the case of my tablet) Fully modify it so nothing on it is stock on it.
Click to expand...
Click to collapse
For your information, odin is for Samsung devices only, hence why it wont recognize you because you are not in download mode. If adb or fastboot recognizes it you can manually flash stock ROM, that is, if you have adb. And also, does your phones display turn on or not?
Hi
I have an lg h850 with bootloader unlocked an a custom rom. Few days ago I buy it a samsung s7 edge so I wanted to sell the lg g5. I wanted to come back to stock with @autoprime tool upercut and at 4% give me an erorr. After that my phone is in bootlop an my pc recognize only ,,Android Bootloader Interface" in device manager. Adb, upercut none of them recognize my device. I tried to reinstall the drivers but none of them work. I also tried with a diferent pc, diferent usb cable but still nothing. I can enter in fastboot mod and in stock recovery. Any ideeas ?
PS sorry for my bad english
Pathrick25 said:
Hi
I have an lg h850 with bootloader unlocked an a custom rom. Few days ago I buy it a samsung s7 edge so I wanted to sell the lg g5. I wanted to come back to stock with @autoprime tool upercut and at 4% give me an erorr. After that my phone is in bootlop an my pc recognize only ,,Android Bootloader Interface" in device manager. Adb, upercut none of them recognize my device. I tried to reinstall the drivers but none of them work. I also tried with a diferent pc, diferent usb cable but still nothing. I can enter in fastboot mod and in stock recovery. Any ideeas ?
PS sorry for my bad english
Click to expand...
Click to collapse
I don't know if it's truly windows or LGup, but it can a pain in the butt. You try different kdz version? Redown-load kdz on stable connection? I know you tried on different PCs, but how many? A lot of the time I seem to have issues with PC. Like my 1 laptop works every time with LGup and kdz. Then other PCs its hit and miss.