So I as successfully able to root the phone using the Windows version of Kingo Root and then installed Super Su and Busy Box but I can't get a recovery to work on it, yet.....would love a Recovery like TWRP or Phil's and CM13 port for this phone.
Finally got it rooted with KingRoot
Just noticed that the build.prop has the ro.build.id-LMY47V
That's the 5.1.1 for the 2013 Nexus 7
OldMansGhost said:
Finally got it rooted with KingRoot
Click to expand...
Click to collapse
Hi I would to know how you rooted the Coolpad Rogue 3320A. I was looking at Kingo root and KingRoot and they dont give good instructions.
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.
The Kingo Root Windows app gives instructions in English when you run it. Which are to connect the phone to the computer with a USB cable and enable "USB debugging" in the phone's "Settings" under "Developer options'. Then click the ROOT button when it appears. KingRoot is in Chinese, but I just followed the same procedure.
To get "Developer options" to show in the phone's settings , you need to give 7 or 8 taps to the "Build number" under "About phone" in the phone's "Settings".
Before I tried rooting I also ran COOLPAD-140926-SETUP.EXE in the CD Drive labeled "Coolpad_USB_Driver" that shows up in Windows Explorer when the phone is connected to the PC by USB cable. I also installed minimal ADB and Fastboot and Google USB drivers using 15 seconds ADB Installer v1.3 http://forum.xda-developers.com/showthread.php?p=48915118 But I think that they may not have been necessary.
The version of Windows KingRoot I had success with was KingRootSetup_v3.1.0.1125_105002.exe downloaded from kingroot.net
There's a setting in the developer options to allow the bootloader to be unlocked. I've not tried to fastboot to work yet.
"Vanilla" ROM or at least vanilla dialer/phone apps?
I'm interested in some kind of vanilla dialer/phone/telecom app set (5.1.1 based) or a full ROM that's AOSP so that I can toss out T-Mo's "Wi-Fi Calling" and use the built-in Android SIP client with its normal configuration screens.
If anyone has accomplished the same with this device or any other T-Mo 5.1 based device, please let me know. I'd really like to be able to configure the system dialer to connect to my SIP PBX directly rather than use a half dozen hacks to give me half-working VoIP calling of my own.
(Note: If there's a T-Mo 4.4 based image out there, that would suffice, as I can at least make VoIP apps intercept dial requests, which T-Mo Wi-Fi Calling prevents on 5.1. This device shipped with 5.1, but it might be possible that a similar model's ROM image might work on this as well.)
/system image
anyone with a rooted 3320a that might be able to provide me with a stock(or rooted stock) image of /system? i managed to softbrick my device after rooting and i forgot to do a dd of the system partition before mucking around in it
thanks in advance
Root Genius Might Work
venuspcs said:
So I as successfully able to root the phone using the Windows version of Kingo Root and then installed Super Su and Busy Box but I can't get a recovery to work on it, yet.....would love a Recovery like TWRP or Phil's and CM13 port for this phone.
Click to expand...
Click to collapse
My Arise don't have a custom recovery either. This kind of disappoints me, as this phone is a good phone for the price.
However, I thought I'd share with you guys that Root Genius may also work to root the Rogue as it does root my Arise. (I don't own a Rogue, so I can't confirm this.) It's always better to have more than one way to root your phone safely right?
Kingroot
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.
The Kingo Root Windows app gives instructions in English when you run it. Which are to connect the phone to the computer with a USB cable and enable "USB debugging" in the phone's "Settings" under "Developer options'. Then click the ROOT button when it appears. KingRoot is in Chinese, but I just followed the same procedure.
To get "Developer options" to show in the phone's settings , you need to give 7 or 8 taps to the "Build number" under "About phone" in the phone's "Settings".
Before I tried rooting I also ran COOLPAD-140926-SETUP.EXE in the CD Drive labeled "Coolpad_USB_Driver" that shows up in Windows Explorer when the phone is connected to the PC by USB cable. I also installed minimal ADB and Fastboot and Google USB drivers using 15 seconds ADB Installer v1.3 http://forum.xda-developers.com/showthread.php?p=48915118 But I think that they may not have been necessary.[/Q UOTE] I opens kingroot in my browser and used it for translation
Click to expand...
Click to collapse
hi guys,i av rooted coolpad 3320a with kingroot windows version but when i try to unlock with sigma box it says root the phone first. Anyone with a solution pliz help. Thanks in advance
KingRoot (Android version) worked for me
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.]
Just another data point. . .
KingRoot (Android app) v4.9.0 142 worked on this Coolpad:
Model: 3320A
Android: 5.1.1
Baseband: GW_T2_01134._01
Kernel: 3.10.49 (08/10/2015)
Build: 5.1.157.00.T2.150810.LMY47V
Happy camper -- For $20 this is a great no-tears tinkering platform.
Click to expand...
Click to collapse
myoshinaga said:
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.]
Just another data point. . .
KingRoot (Android app) v4.9.0 142 worked on this Coolpad:
Model: 3320A
Android: 5.1.1
Baseband: GW_T2_01134._01
Kernel: 3.10.49 (08/10/2015)
Build: 5.1.157.00.T2.150810.LMY47V
Happy camper -- For $20 this is a great no-tears tinkering platform.
Click to expand...
Click to collapse
So what is the final verdict?
Click to expand...
Click to collapse
Hello, but I have a question. Is busybox OK on this device? I am afraid that installing it may brick the device
got it working with kingo root, but only after kingroot said it worked. otherwise kingo root kept freezing. havent been able to get supersu installed but kingo root works just fine
I was able to root the coolpad rouge without a computer. I'm going to create an account and upload the tut. -cyphermil
myoshinaga said:
So what is the final verdict?
Click to expand...
Click to collapse
You CAN root this with the Kingroot apk.
I'm new and can't post links so to make the links below work just abbrev the http and add a colon.
As soon as I can post links I will fix them.
PROOF:
Hypertexttransferprotocol//imgur.com/a/SXmMc
Here's what I did:
1) download latest kingroot Hypertexttransferprotocol//androidmtk.com/download-kingroot-application
2) enable USB debugging in developer options
3) enable OEM boot loader unlock in developer options
6) enable unsigned APKs
7) install kingroot apk
8) run kingroot
9)?
10) PROFIT
Will update with better details later. Sorry for mistakes and formatting I'm on my rooted coolpad rouge.
Kotetsukun said:
Hello, but I have a question. Is busybox OK on this device? I am afraid that installing it may brick the device
Click to expand...
Click to collapse
Busybox is safe to install. Will post screenshots when I am able to include links
Never mind. I am happily satisfied anyways. Thank you.
Coolpad Rouge 3320A
So im am writing this post via on my mac...
So i want to root my phone but when i tried to install king root i got to 90 percent then the app closes its self and disables my wifi unless i reboot my phone.
im just need to root my phone for to install xposed framework and installer
~Ninja, Aug/13/16
Related
I looked everywhere for help to root this but without any lock tried oneclickroot Superoneclick ect.. even tried z4root with no luck at all any help would be great or if someone can make a custom firmware from the stock here is the link to the stock thanks flare2(dot)hipstreetonline(dot)ca
stretch30 said:
I looked everywhere for help to root this but without any lock tried oneclickroot Superoneclick ect.. even tried z4root with no luck at all any help would be great or if someone can make a custom firmware from the stock here is the link to the stock thanks flare2(dot)hipstreetonline(dot)ca
Click to expand...
Click to collapse
install root checker basic on play store
enable usb debugging first in the developer options
(if you don't know how to get developer options, click on build number 7 times in the "about tablet" option)
plug your tablet into your computer and install the adb driver: adbdriver(dot)com/upload/AdbDriverInstaller(dot)exe
after installing the driver, unplug your tablet, then install kingo root: kingoapp(dot)com
launch kingo root and plug your tablet into your computer (make sure usb debugging is checked)
then root your tablet, if it says "root status: yes" then click on "root again"
reboot your tablet and open supersu, update the su binary (normal installation only)
reboot again, open root checker, click on verify root, supersu will popup, click on grant
if it says "sorry! this device..." then close root checker, open it, and click verify root
then you should have root access
sorry for my bad english
root
KINGO ANDROID ROOT program. it worked on my hs-9dtb7 and my digital2 tab as well
Please help me. Can you please tell me how to root iball slide 7803q-900 its running on android 4.4.2.
I searched the internet about this but I did not find any information regarding this.
Thanks
ashwanid said:
Please help me. Can you please tell me how to root iball slide 7803q-900 its running on android 4.4.2.
I searched the internet about this but I did not find any information regarding this.
Thanks
Click to expand...
Click to collapse
I am also looking for the same. The device is detected as "MyHTC" and it seems that the bootloader is locked. There is no fastboot option to get the device id to unlock bootloader. I can get into recovery mode. I am not able to post the link to the product page but you can search and find the same on site iball.co.in.
Please try installing Towelroot on your device and using it to obtain root. It will root many Kitkat devices.... uses a few different exploits to achieve root access.
There is a LifeHacker thread on it here: http://bit.ly/1qAobRl
I tried baudi root to root my device. The Chinese superuser is installed but there is no root access. And that superuser apk made my tablet sluggish. Can u tell how to remove the superuser.apk. my tab isn't rooted.
And towel root and many other apps doesn't work.
Thanks
And I want to tell that first I installed kingroot and my tab was rooted. But game killer was not working then I unrooted . then again tried with baudi root but It made my tab sluggish.
Please help to remove that superuser
Download the latest kingroot.
uttam27 said:
I am also looking for the same. The device is detected as "MyHTC" and it seems that the bootloader is locked. There is no fastboot option to get the device id to unlock bootloader. I can get into recovery mode. I am not able to post the link to the product page but you can search and find the same on site iball.co.in.
Click to expand...
Click to collapse
I could get into fastboot mode through adb command "reboot bootloader". However, fastboot screen is blank with only "Fastboot=>" mentioned at bottom left of screen. In bootloader mode device is recognized as "mtk6582_phone". I don't have the phone ROM file that could have been used to create custom CWM recovery and without root I cannot backup the phone ROM. One-click root methods fail. Any ideas?
Try to root with kingroot it rooted this device.
Download the latest version of this app.
ashwanid said:
Try to root with kingroot it rooted this device.
Download the latest version of this app.
Click to expand...
Click to collapse
I am little skeptical about using methods that are not well-known. You mentioned you faced some issues after this..?
I tried Kingo but it failed
I said to use kingroot and not Kingo root. Download it here kingroot.net
So here's the long awaited root!!!
Just use the following root tool. I just Used it myself
Its called root genius
Download it here
htt p :// downloa d1766 . mediafire .com /9g59 3gbw8bjg/j17ivc iz1x808wo/RootGen ius_v2.3.0.zip
Just backspace the spaces in the link and copy it to the address bar of your browser then press enter to download the file.
This is because i couldn't post a link
I am sure this works fine
it worked fine for me
Connect the Tablet to your pc and click on root
That's it
Congratulations! You have rooted your tablet...
Hope this Helps
Regards
Adarsh Mathai
Just use iroot (also known as vroot) Easy steps starts here:
1. DOWNLOAD iroot /vroot
2.Use ur usb cable and connect ur phone to pc
3. Put ur phone in usb debugging mode available in developer option
4. IF u dont have developer option then go to setting->about phone and continously click build number till you get notified.
5. And open vroot and let it detect ur phone. It will ask permission so give permission from ur tablet. It will download and install some drivers.
6. U can see there is a option to root ur phone go ahead and click it
7. Ur tablet may restart so don't. Pannic
Volla rooted ur iball
Hi I have been trying to root my Android device.
Maximus Max-909
Android 4.0.4
Software I tried:
Farmaroot
Towelroot ( Doesn't support my device )
KingRoot
Root Genius
mt6589_rooting_pkg
Cydia Impactor (Can't find Driver software Err Msg: Write:No space left)
Root_with_Restore_by_Bin4ry_v36 (Method 3, 5)
Note: I Checked with Root Checker if Root worked
I did a factory data reset after I tried each Method
About the driver software:
The driver software is working. I am sure of this because I am a beginner at developing
Android application and I have been running my Soft from eclipse using USB Debugging on my phone.
I also used SnapPea which works fine for connecting my Android to my Computer.
But in the Device Manager it shows my device "YunOS Phone" insted of "Android Phone" (using Windows 8.1 Laptop)
My Driver name is YunOS ACB Interface.
I have been trying this for Almost a week.
I really need some Expert help on this. Can anyone please point to the right direction.
have you tried with Vroot it seems good ?
if you succeed you have to change chinese supersu ( google search )
It worked
jean.michel.78 said:
have you tried with Vroot it seems good ?
if you succeed you have to change chinese supersu ( google search )
Click to expand...
Click to collapse
Hi, Thanks :good: for your suggestion. VRoot installed a SuperUser ( Kinguser ), Its English. But when I checked with Root checker it still shows No Root Access. I repeated the whole process. I think I missed a step ( VRoot shows my phone is rooted ).
Can you please tell me what should be my next step.
@Firefly244
Try Towelroot. Press the Lambda (greek letter) to download it.
https://towelroot.com/
Doesn't work
christi9503 said:
@Firefly244
Try Towelroot. Press the Lambda (greek letter) to download it.
Click to expand...
Click to collapse
Towelroot doesn't support my device. Sorry I should have mentioned it before. Thanks anyway.
dont try several tools if you have succeeded with vroot you can damage your device
you can check by typing "su" in a terminal emulator
after you have only to switch chinese supersu by chainfire supersu
http://forum.xda-developers.com/showthread.php?t=2532818
after you can test get titanium backup who ask to be root
and you can suppress applications you dont want be carefull anyway
I tried Kingoroot, Iroot, Vroot, Framaroot, Rootmaster and many other aplikacija.
None have worked.Kingoroot sees my phone as a TCL Device(5038x), but the real name is Alcatel OneTouch D5 (5038x). Does anyone know how to root this phone?
Do you have an impact if it's locked bootloader. and if so how it unlocks.
People are explaining how to root the most popular phones, but not the specific phones like i have.
pop31 said:
I tried Kingoroot, Iroot, Vroot, Framaroot, Rootmaster and many other aplikacija.
None have worked.Kingoroot sees my phone as a TCL Device(5038x), but the real name is Alcatel OneTouch D5 (5038x). Does anyone know how to root this phone?
Do you have an impact if it's locked bootloader. and if so how it unlocks.
People are explaining how to root the most popular phones, but not the specific phones like i have.
Click to expand...
Click to collapse
Can you run adb shell? If so, run "adb shell" in a dos terminal do the following:
#cd /system/
# cp build.prop /sdcard/
# exit
Click to expand...
Click to collapse
Then from the same dos terminal run "adb pull /sdcard/build.prop" ... (make sure your current location e.g. c:\users\blablah\yadayada)
Then use windows explorer to navigate to where the build.prop was saved to view its contents (you should be able to open it using notepad or wordpad) ... report back the values for the following:
ro.build.version.release
ro.product.board
ro.board.platform
If it's MSM8212, 4.4.2 and MSM8610 you're pretty much out of luck...
And yes Alcatel bootloader for Qualcom (e.g. MSM8212) devices has thus far not been 'hacked' if you know what I mean.
This is how I managed to root
Maybe someone will help.
1.Instalirao'm on the computer Android SDK tools.
2.Onda Android ADB, Fastboot and other tools.
3.Instal Java developer kit 8u25.
I installed on their computers VRoot v.1.7.9.
I joined the phone, waited to recognize him and started Root.
My phone is rebooted, and asked to install VRoot and on the phone, which I did.
I started VRoot and on the phone, and so alternately I managed to root the phone.
Then I installed and started supers.
cant root
pop31 said:
Maybe someone will help.
1.Instalirao'm on the computer Android SDK tools.
2.Onda Android ADB, Fastboot and other tools.
3.Instal Java developer kit 8u25.
I installed on their computers VRoot v.1.7.9.
I joined the phone, waited to recognize him and started Root.
My phone is rebooted, and asked to install VRoot and on the phone, which I did.
I started VRoot and on the phone, and so alternately I managed to root the phone.
Then I installed and started supers.
Click to expand...
Click to collapse
Im not very good in this rooting process and i ve tried to root my alcatel d5 with vroot and framaroot and doesnt work
if u could me explaind a bit easier what i have to do? i would be graetfull thks and sorry for bad english
about DOS mode...
can somebody help me how to install dos on windows 10 pro technical preview, evaluation copy : 10041...or maybe help me root alcatel 5038x without dos. i would be grateful
toniternova said:
can somebody help me how to install dos on windows 10 pro technical preview, evaluation copy : 10041...or maybe help me root alcatel 5038x without dos. i would be grateful
Click to expand...
Click to collapse
You can root it withowt dos via pdanet. I rooted mine that way.
Mobo Genie is the way to go!
1. Download mobo genie
2. Install and run (close the window when it asks you do you want wifi connection or arabic connection)
3. Connect your device
4. Go to Tools>One Click Root
5. Profit!!!!1
blazeaster said:
You can root it withowt dos via pdanet. I rooted mine that way.
Mobo Genie is the way to go!
1. Download mobo genie
2. Install and run (close the window when it asks you do you want wifi connection or arabic connection)
3. Connect your device
4. Go to Tools>One Click Root
5. Profit!!!!1
Click to expand...
Click to collapse
Nope, cannot on pop D5 5038A
gl3nborj said:
Nope, cannot on pop D5 5038A
Click to expand...
Click to collapse
Looks like theres a major diference between 5038x and 5038a. I flashed my boot image with image for 5038a, and now its bricked!
These two mobiles are not compatible obviously.
NOTE TO EVERYONE:DONT FLASH ALCATEL POP D5 IF YOU ARENT ABSOLUTELY SURE THAT IMAGES/ROMS ARENT SPECIFIC FOR YOUR MODEL. IF YOU ARENT SURE WHAT IS YOUR MODEL ID, CHECK UNDER THE BATTERY
blazeaster said:
You can root it withowt dos via pdanet. I rooted mine that way.
Mobo Genie is the way to go!
1. Download mobo genie
2. Install and run (close the window when it asks you do you want wifi connection or arabic connection)
3. Connect your device
4. Go to Tools>One Click Root
5. Profit!!!!1
Click to expand...
Click to collapse
I tried mobo genie method and it starts one click to root after launching it (saw it in task manager) but it didn't root it.
I've also tried downloading one click root from official site and was without results.
The tool that worked for me was Shaume (shuame.com/en/root/).
It's a chinese based website which is probably one of the reasons.
After rooting it installed King User (basically SuperSU) and Cleaner Master.
PS: It might say that it failed to root but it worked.
Using POP D5 5038X.
BiscuitEdi said:
I tried mobo genie method and it starts one click to root after launching it (saw it in task manager) but it didn't root it.
I've also tried downloading one click root from official site and was without results.
The tool that worked for me was Shaume (shuame.com/en/root/).
It's a chinese based website which is probably one of the reasons.
After rooting it installed King User (basically SuperSU) and Cleaner Master.
PS: It might say that it failed to root but it worked.
Using POP D5 5038X.
Click to expand...
Click to collapse
Can you post some screenshots or any alternative methods of rooting? I am trying on 3 different PCs to root my 5038x with RootGenius but still with no luck :/
5038a Roms
any cyanogenmod 12.1 rom for alcatel one touch pop d5 5038a
Phone problems
I tried to install the latest version of software on alcatel pop d5 5038x(that one that appears when new software is available).Now my phone is stucked on boot menu. I tried the methods shown on interner but nothing works. I formated the phone it doesnt work. When I try to install software from pc it ways " There is no greater software version available to upgrade your phone,actual version on your phone is the latest". Can someone help me? When I turn on my phone enters boot menu and I tried everything and I cant access to the phone. Help me pleaseee
Got this device and so far there's very little I've found for it so I want to share my findings.
*ROOT can be obtained using king root.
*link to source code http://opensource.lge.com/osSch/list?types=ALL&search=lgl22
Ive tried all of the methods to wipe out king root and get this thing switched over to super su. here are the only instructions that i have found that work, only thing I can add to this info is, i used pdanet for drivers and phone has to be in "ptp" mode for any of it to work.
http://forum.xda-developers.com/showpost.php?p=60669196&postcount=1
Remove King root
How exactly did you get KingRoot completely off the phone? I have tried a couple of times even through adb and it will not go away lol.
I am assuming that you followed just the "HOW TO INSTALL BUSYBOX, SUPERUSER, AND SU BINARIES" part of that post or did you do the whole thing?
Also have you managed or tried to get this thing to boot into download mode? Not sure if it even has it as an option but i tried for like 8 hours last night to get it to go, the best i found was the hard button combo from lg leon for recovery that worked.
D34DH4CK said:
How exactly did you get KingRoot completely off the phone? I have tried a couple of times even through adb and it will not go away lol.
I am assuming that you followed just the "HOW TO INSTALL BUSYBOX, SUPERUSER, AND SU BINARIES" part of that post or did you do the whole thing?
Also have you managed or tried to get this thing to boot into download mode? Not sure if it even has it as an option but i tried for like 8 hours last night to get it to go, the best i found was the hard button combo from lg leon for recovery that worked.
Click to expand...
Click to collapse
My apologies for the delayed response, link was updated to the correct one. I've been playing the find a job game lately and has taken priority. Also this thread wasn't on my watch threads list so I've not gotten any notification of your question, I've fixed this as well. Again thank you for your patience.
Got kingroot removed completely and installed supersu with terminal emulator ......now waiting for cyanogenmod....
So is there a cwm or twrp for this yet?
Sent from my XT1028 using XDA Premium 4 mobile app
No custom recovery to my knowledge at the moment
Is king root an app on phone or from computer
Sent from my XT1028 using XDA Premium 4 mobile app
ozz200127 said:
Is king root an app on phone or from computer
I believe I had to use the computer, it's been a while
Click to expand...
Click to collapse
Do u know if u can use xposed on this phone
Sent from my XT1028 using XDA Premium 4 mobile app
At the time of post no, xposed has come a long way since then though
I just used xda RootJunky's Amazon Fire 5th Gen SuperTool (April 6, 2016 version), JUST AS IT IS, to root my Tracfone LG L22C Power. With only a couple of mouse clicks.
Even if you are already rooted with KingRoot, you can use this tool to uninstall KingRoot and install SuperSU. (Just run the tool, let it re-install KingRoot, don't run KingRoot but hit Enter on the SuperTool to then uninstall KingRoot and install SuperSU).
Tracfone LG L22C Power info:
Model Number: LGL22C
Android version: 5.0.1
Kernel version: 3.10.49
Build number: LRX21Y
Software version: L22CV10a
The SuperTool batch file script rooted the phone with KingRoot and then uninstalled KingRoot and installed SuperSu.
I have since installed ES File Manager, Titanium Backup, Link2sd on the phone. Root is totally working. Rooted with only a couple of clicks!
Just enable Developer options on LG L22C (by tapping phone Build Number 7 to 10 times [Settings, About Phone, Software info, Build Number (tap 7 to 10 times)]), enable USB debugging on L22C in the Developer options settings.
Connect L22C to Windows 10 with a USB data cable (I used the USB 2.0 port). When screen message on the L22C mentions MTP mode, tap that and change to PTP mode on the phone.
Install RootJunky's SuperTool to the Windows 10 desktop.
Run RootJunky's SuperTool (Amazon-Fire-5th-gen.bat) You may have to read the instructions on the pages below and install adb drivers. Pick option #6 Root. Choose Option #3: version 5.1.2.
Press enter and KingRoot will be installed on the phone from the SuperTool. (approve any messages that appear on phone screen) Now don't touch the PC SuperTool until the phone is rooted.
Open KingRoot on the phone and run it. You may have to run KingRoot several times and the phone may reboot. Just keep running KingRoot until the LG L22C is rooted. After KingRoot reaches 100%, then press ENTER on the PC.
The SuperTool will now uninstall KingRoot and install SuperSU on the phone.
Choose NORMAL SuperSU install on the phone when prompted. When SuperSU is installed, reboot the phone. Disconnect data cable.
After reboot the LG L22C Power is rooted. There will be a request by SuperSU to upgrade. Approve it. You can now install Titanium Backup, Link2sd, ES File Manager, etc. Your phone is rooted. As easy as that. THANKS ROOTJUNKY!!!
Info and links to Download RootJunky's SuperTool at these pages:
Amazon Fire 5th Gen [SuperTool] Root, Google play install, block ota updates and more
http://forum.xda-developers.com/amazon-fire/development/amazon-fire-5th-gen-supertool-root-t3272695
"AmazonFire5thGenSuperTool.zip"
http://rootjunkysdl.com/files/?dir=SuperTool
Robo-rooter said:
I just used xda RootJunky's Amazon Fire 5th Gen SuperTool (April 6, 2016 version), JUST AS IT IS, to root my Tracfone LG L22C Power. With only a couple of mouse clicks.
Even if you are already rooted with KingRoot, you can use this tool to uninstall KingRoot and install SuperSU. (Just run the tool, let it re-install KingRoot, don't run KingRoot but hit Enter on the SuperTool to then uninstall KingRoot and install SuperSU).
Tracfone LG L22C Power info:
Model Number: LGL22C
Android version: 5.0.1
Kernel version: 3.10.49
Build number: LRX21Y
Software version: L22CV10a
The SuperTool batch file script rooted the phone with KingRoot and then uninstalled KingRoot and installed SuperSu.
I have since installed ES File Manager, Titanium Backup, Link2sd on the phone. Root is totally working. Rooted with only a couple of clicks!
Just enable Developer options on LG L22C (by tapping phone Build Number 7 to 10 times [Settings, About Phone, Software info, Build Number (tap 7 to 10 times)]), enable USB debugging on L22C in the Developer options settings.
Connect L22C to Windows 10 with a USB data cable (I used the USB 2.0 port). When screen message on the L22C mentions MTP mode, tap that and change to PTP mode on the phone.
Install RootJunky's SuperTool to the Windows 10 desktop.
Run RootJunky's SuperTool (Amazon-Fire-5th-gen.bat) You may have to read the instructions on the pages below and install adb drivers. Pick option #6 Root. Choose Option #3: version 5.1.2.
Press enter and KingRoot will be installed on the phone from the SuperTool. (approve any messages that appear on phone screen) Now don't touch the PC SuperTool until the phone is rooted.
Open KingRoot on the phone and run it. You may have to run KingRoot several times and the phone may reboot. Just keep running KingRoot until the LG L22C is rooted. After KingRoot reaches 100%, then press ENTER on the PC.
The SuperTool will now uninstall KingRoot and install SuperSU on the phone.
Choose NORMAL SuperSU install on the phone when prompted. When SuperSU is installed, reboot the phone. Disconnect data cable.
After reboot the LG L22C Power is rooted. There will be a request by SuperSU to upgrade. Approve it. You can now install Titanium Backup, Link2sd, ES File Manager, etc. Your phone is rooted. As easy as that. THANKS ROOTJUNKY!!!
Info and links to Download RootJunky's SuperTool at these pages:
Amazon Fire 5th Gen [SuperTool] Root, Google play install, block ota updates and more
http://forum.xda-developers.com/amazon-fire/development/amazon-fire-5th-gen-supertool-root-t3272695
"AmazonFire5thGenSuperTool.zip"
http://rootjunkysdl.com/files/?dir=SuperTool
Click to expand...
Click to collapse
Fantastic thank you! Will try this tomorrow on brothers phone
I have a script to force xposed for devices without a recovery. Will give it a try on this phone and let everyone know
SyCoREAPER said:
Fantastic thank you! Will try this tomorrow on brothers phone
I have a script to force xposed for devices without a recovery. Will give it a try on this phone and let everyone know
Click to expand...
Click to collapse
Without recovery, I have not tried anything crazy. Just installed Link2sd, Titanium backup and ES File Manager. Don't want to take the chance of bricking this phone.
Robo-rooter said:
Without recovery, I have not tried anything crazy. Just installed Link2sd, Titanium backup and ES File Manager. Don't want to take the chance of bricking this phone.
Click to expand...
Click to collapse
Right now it's ~$30 so I will take the risk for everyone
Going to go pick it up tomorrow, root and try and push xposed to it.
SyCoREAPER said:
Right now it's ~$30 so I will take the risk for everyone
Going to go pick it up tomorrow, root and try and push xposed to it.
Click to expand...
Click to collapse
There's $60 down the $41773R, xposed failed, bricked. Root went perfectly, thank you for the guide
Officially fully bricked since I can't hard reset or get I to download mode
SyCoREAPER said:
There's $60 down the $41773R, xposed failed, bricked. Root went perfectly, thank you for the guide
Officially fully bricked since I can't hard reset or get I to download mode
Click to expand...
Click to collapse
Check out this website link. These guys might be able to help with the bricked Tracfone:
Tracfone Developers website:
http://tracfonedevs.createaforum.com/bricked-phone-support/
http://tracfonedevs.createaforum.com/index.php
Robo-rooter said:
Check out this website link. These guys might be able to help with the bricked Tracfone:
Tracfone Developers website:
http://tracfonedevs.createaforum.com/bricked-phone-support/
http://tracfonedevs.createaforum.com/index.php
Click to expand...
Click to collapse
Thanks but from what I am seeing its a permanent brick. Sucks. Oh well, took one for the community to attempt to have xposed. Now everyone knows not to try for sure since this stupid phone apparently doesn't even have fastboot , download or accessible stock recovery.
Confirmed by LG; Bricked. They skimped and did not add a way to get to Fastboot/Download mode.
Also everyone be aware that this screen is prone to burn-in. I have a slight ghosting of the LG boot screen burned in
Has anyone found anything for this phone
Here: http://forum.xda-developers.com/leon/how-to/root-lg-leon-lg-power-device-adb-t3383007
Greetings devs, advanced users and all those wannabes like me. the LG POWER L22C has been my only successful root out of four different devices, from different manufacturers...go figure. Anyway, root was achieved on my LG POWER L22C ( Straight Talk, VZW) via Kingroot 4, I believe ( Chinese one). Things however, went a bit sideways after that. Kingroot is dug in like a rabid, star- nosed mole rat, and its somehow interfering with the binary update for SuperSU. I would like to re-root and start anew. Trouble is, I can't seen to find a TWRP or CWM specific to this model. I've tried CyanogenMod, TWRP, Resurrection and I don't know how many other, less known CR's. Here's her specs:
LG POWER LGL22C
Android 5.0.1
Kernal 3.10.49
Build: LRX21Y
Software version: L22C VIDa
Anyone out there has some info on this, and I'd be much obliged for sharing.
Thanks,
CinephilCinephile74
CaPpY
P.S. While we're on the subject of LG, the FIESTA LTE/ Power X2 ( same FCC ID's) which differ only in processor architecture, is proving to be most stubborn in rooting as well. I'll see of there's a forum for this model
. Not a bad phone at all, considering her loadout. Only really lacking in GPU. Phenomenal battery life, due to a nearly 5000 mah battery.
Cinephile74
(CapPy)
***UPDATE 0428 Saturday 24 June***
I'm in trouble again, folks. I've been trying to improve the quality of my root experience with this lil' guy (just found out it is the LG LEON), and I'm also studying to root a ZTE QUEST N817(QLink) and the newest addition, the LG FIESTA LTE, in which even the XDA app identified as an LGE X POWER 2. In fairness, it is, in fact, an X power 2 according to the FCC ID. Only differences I know of are, the XP2 uses a single processor with 8 cores, while the "FIESTA variant" uses a quad set-up with ARMv7 architecture. Bear with me, the point of all this is nigh. Ad to all this, a moderate problem with insomnia. Long story short (TOO LATE), I was installing an app, I believe that was SD CardFix...restores R\W access to 4.+. And ONLY Kit Kat. I had theWong device in my hand, installed this app into 5.0. My poor LG L22C is now stuck at the initial LG screen. Tried SAFE/RECOVERY modes, no joy. Just stuck. This must be the famous soft brick I've been so weary of. Arms mute line a hard bricked device though, because ONLY battery removal powers down the internal thing.
Any answers, explanations, solutions and/or advice Is MOST appreciated!
PEACE ✌