Hi all,
I am using Remix 2.0 on my Intel NUC DN2820FYKH connected to my TV via HDMI.
There is no audio over HDMI. How can we fix this?
I am having the same issue with my Nuc DN2820FYKH. Are you running yours from USB?
keenan316 said:
I am having the same issue with my Nuc DN2820FYKH. Are you running yours from USB?
Click to expand...
Click to collapse
Tried both, on USB 3 and installed on HDD
suku_patel_22 said:
Tried both, on USB 3 and installed on HDD
Click to expand...
Click to collapse
I am running mine from an SSD and it keeps freezing on the Remix OS boot screen. Got it to actually boot up once, but after that it just freezes everytime! Dont know if it's the SSD... I'm gonna try from USB and see if that fixes it..
Have you had any freezes on yours? Did you use the legacy boot iso?
keenan316 said:
I am running mine from an SSD and it keeps freezing on the Remix OS boot screen. Got it to actually boot up once, but after that it just freezes everytime! Dont know if it's the SSD... I'm gonna try from USB and see if that fixes it..
Have you had any freezes on yours? Did you use the legacy boot iso?
Click to expand...
Click to collapse
If the system did boot one time after installation, your problem probably is your custom grub entry.
About audio over HDMI, it's a known Linux issue, and Android-x86 has not alsamixer, so we can't find a solution for this problem yet.
Sent from my XT1095 using Tapatalk
lucasdeeiroz said:
If the system did boot one time after installation, your problem probably is your custom grub entry.
About audio over HDMI, it's a known Linux issue, and Android-x86 has not alsamixer, so we can't find a solution for this problem yet.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
According to the technical specifications, the Remix Mini supports multichannel audio output over HDMI. So is this problem specific for x86 platforms? I have managed to get audio over HDMI working on a Linux platform (Ubuntu), although it was quite cumbersome.
So might this be just a configuration issue? Unfortunately, I have no clue where to start trying.
CountNerd said:
According to the technical specifications, the Remix Mini supports multichannel audio output over HDMI. So is this problem specific for x86 platforms? I have managed to get audio over HDMI working on a Linux platform (Ubuntu), although it was quite cumbersome.
So might this be just a configuration issue? Unfortunately, I have no clue where to start trying.
Click to expand...
Click to collapse
Remix Mini is designed for Remix OS (and vice-versa). Our notebooks aren't. You can solve your issue on Ubuntu with ALSA. And there is the problem: Remix OS doesn't use ALSA.
Yes, it is a configuration issue, but in a deep and advanced level.
Sent from my Inspiron N4050 using Tapatalk
suku_patel_22 said:
Hi all,
I am using Remix 2.0 on my Intel NUC DN2820FYKH connected to my TV via HDMI.
There is no audio over HDMI. How can we fix this?
Click to expand...
Click to collapse
This is about all I can find.
https://groups.google.com/forum/#!topic/android-x86/tY3Mct71b-Q
Thanks for the link. I spent hours trying to make this work, but to no avail. After spending more than a week trying to turn my NUC DN2820FYKH into an HTPC running on Android, I have given up for now. In addition to the problem with HDMI audio, I haven't yet found a way to use the NUC's built-in infrared module on Android. There are a couple of initiatives to port LIRC to Android (e.g. Irdroid), but they focus on using the device as an IR transmitter, whereas I would like the NUC to function as an IR receiver.
CountNerd said:
Thanks for the link. I spent hours trying to make this work, but to no avail. After spending more than a week trying to turn my NUC DN2820FYKH into an HTPC running on Android, I have given up for now. In addition to the problem with HDMI audio, I haven't yet found a way to use the NUC's built-in infrared module on Android. There are a couple of initiatives to port LIRC to Android (e.g. Irdroid), but they focus on using the device as an IR transmitter, whereas I would like the NUC to function as an IR receiver.
Click to expand...
Click to collapse
You applied a patch to the kernel?
adfurgerson said:
You applied a patch to the kernel?
Click to expand...
Click to collapse
Yes, I did. Since I didn't have the kernel sources installed, I just replaced the library file (snd-hda-codec.ko) as suggested in the thread. I also tried different values for the kernel parameters in the grub menu item (it's a dual-boot system with Lubuntu installed in the boot partition). But none of these worked out. I really like to experiment, but applying kernel patches is something that I tend to stay away from.
I switched to the latest build of Android-x86 (4.4-r5) which I believe is the groundwork for Remix OS. I can see the HDMI device when I type 'alsa_aplay -l' (card 0, device 3). In Lubuntu, it's a simple case of switching the default device. But as lucasdeeiroz has pointed out, ALSA functionality is not fully implemented in Remix OS / Android-x86.
CountNerd said:
Yes, I did. Since I didn't have the kernel sources installed, I just replaced the library file (snd-hda-codec.ko) as suggested in the thread. I also tried different values for the kernel parameters in the grub menu item (it's a dual-boot system with Lubuntu installed in the boot partition). But none of these worked out. I really like to experiment, but applying kernel patches is something that I tend to stay away from.
I switched to the latest build of Android-x86 (4.4-r5) which I believe is the groundwork for Remix OS. I can see the HDMI device when I type 'alsa_aplay -l' (card 0, device 3). In Lubuntu, it's a simple case of switching the default device. But as lucasdeeiroz has pointed out, ALSA functionality is not fully implemented in Remix OS / Android-x86.
Click to expand...
Click to collapse
Okay, I appreciate the effort you put into this as I don't have the knowledge or really the time required to learn how. If I find anything else I'll be sure to post it here.
Same issue with NUC D54250WYK. I hope Remix OS guys will be able to find out a solution
pipcr2 said:
Same issue with NUC D54250WYK. I hope Remix OS guys will be able to find out a solution
Click to expand...
Click to collapse
No sound on NUC D54250 as well . .
ver. Remix_OS_for_PC_64_B2016030106
the same here, no HDMI sound on ny old Asrock ION 330HT-BD
testing release_Remix_OS_for_PC_64bit_B2016040501 in Asrock ION 330HT-BD but:
HDMI, Audio out normal, composite audio (vulgar RCA) and even have experienced the DIGITAL OUT spdif and nothing gives/no sound in Kodi or the Remix.
there will be no way to get around this problem?
sorry my bad english
Also on my asrock Q2900M (Intel processor) i've no sound through HDMI. Is there any workaround?
Thank you very much.
ayoraider07 said:
No sound on NUC D54250 as well . .
ver. Remix_OS_for_PC_64_B2016030106
Click to expand...
Click to collapse
Same issue with several x86 Android images for NUC. hope this can get sorted out.
Related
I am working on a mediacenter Rom and I am looking for suggestions for remote control apps for android to control the Q anyone have any good suggestions on controlling the Nexus Q over bluetooth or wifi. This is my only hiccup for this rom.
How far have you got with the ROM yet?
right now i use Bluetooth mouse/keyboard combined with adb over wifi, do you need more control than this?
I've tried a VNC approach but it was a bit strange doing everything from a browser window, but using VNC I used the VMLite_VNC_Server_1_0_4.apk install on Nexus Q
i use ADB and a BT mouse myself at the moment to navigate through the Q. did you manage to add a different launcher on startup?
BT Keyboard?
The tutorials on this board for getting BT Mouse work fine for me. I can't get BT Keyboard working though. If anyone has had success with that let me know!
---------- Post added at 08:32 AM ---------- Previous post was at 08:26 AM ----------
Also I've compiled the kernel to support NFS and CIFS. Recommend adding that to your ROM.
Plex has worked best for me in terms of a consistent playback. This requires Plex media server to be run somewhere else. As its transcoded you can tune the bitrate for consistent playback. I've tried a variety of other players accessing the media via NFS, however none of them can handle full bitrate MKV. Probably it just exceeds the capability of the device.
Romz
My goal is to have a rom others can flash pretty easily and use an existing android device to navigate on the Q.
I'm honestly just figuring out what basic things to throw on the Q for now I might just put a way to flash gapps, but install xbmc.
Heres the process right now that im stuck with now:
-Nandroid restore using the same method I posted for restoring.
(I've been researching the possibility to have a script push and restore the the rom)
-use OTG USB with keyboard and mouse to pair with device
(I've used tablet remote from the play store but the only issue is that the text input does NOT work so searching for things on the store sucks)
But since most people got them at IO the current owners should be pretty confident with adb.
fiveipads said:
My goal is to have a rom others can flash pretty easily and use an existing android device to navigate on the Q.
I'm honestly just figuring out what basic things to throw on the Q for now I might just put a way to flash gapps, but install xbmc.
Heres the process right now that im stuck with now:
-Nandroid restore using the same method I posted for restoring.
(I've been researching the possibility to have a script push and restore the the rom)
-use OTG USB with keyboard and mouse to pair with device
(I've used tablet remote from the play store but the only issue is that the text input does NOT work so searching for things on the store sucks)
But since most people got them at IO the current owners should be pretty confident with adb.
Click to expand...
Click to collapse
How is the play store working on your ROM? able to download/update?
Are you using OTG USB with a hardware adapted or software? (just wondering)
Why do you need to Nandroid Restore the ROM as opposed to making a flashable zip and installing it over CWM?
UKROB86 said:
How is the play store working on your ROM? able to download/update?
Are you using OTG USB with a hardware adapted or software? (just wondering)
Why do you need to Nandroid Restore the ROM as opposed to making a flashable zip and installing it over CWM?
Click to expand...
Click to collapse
1. Haven't tried/ im messing with the build.prop
2. Im using an OTG cable with a USB Hub w/ a keyboard and mouse
3. CWM is a mess right now the text is super tiny on a 1080p tv and I can't get a hold of the dev on rootzwiki to get the source from him so I fix the screen resolution.
fiveipads said:
1. Haven't tried/ im messing with the build.prop
2. Im using an OTG cable with a USB Hub w/ a keyboard and mouse
3. CWM is a mess right now the text is super tiny on a 1080p tv and I can't get a hold of the dev on rootzwiki to get the source from him so I fix the screen resolution.
Click to expand...
Click to collapse
Cool
What's ur progress on the ROM so far? What source are you building it from?
Would it be easier to get the Q working using CM and then just add the xbmc app to act as a media centre? Would probably be less dedicated by could utilize the Q's full potential.
Just my 2 cents.
By the way, please don't get me wrong. I fully appreciate your work!
fiveipads said:
I am working on a mediacenter Rom and I am looking for suggestions for remote control apps for android to control the Q anyone have any good suggestions on controlling the Nexus Q over bluetooth or wifi. This is my only hiccup for this rom.
Click to expand...
Click to collapse
I think the perfect remote software AND the perfect launcher just don't quite exist yet.
One suggestion though... you can probably get the tablet remote to work properly if you tweak the key layout in your rom as I've described in this thread: http://forum.xda-developers.com/showthread.php?t=1892359
You could remap each of the letters to whatever key input is being sent by tablet remote.
Keep us updated on your progress!
dj_ghosie said:
Would it be easier to get the Q working using CM and then just add the xbmc app to act as a media centre? Would probably be less dedicated by could utilize the Q's full potential.
Just my 2 cents.
By the way, please don't get me wrong. I fully appreciate your work!
Click to expand...
Click to collapse
I agree better to have a full CM ROM on here than just an app as the front, but I think he is making a a full ROM, but not sure..
Remote
I don't see why some off you are having problems controling the Q I only used adb once to root and navigate to get my stuff ready. Has far has a controller this is the best mouse keyboard combo I found small portable controll type http://www.ipazzport.com/16A.html is a full keyboard plus it already has the android buttons on it. there is a tutorial here how to redirect the home button to call that way goes to launcher instead of the screen saver thing(http://forum.xda-developers.com/showthread.php?t=1892359). Use nova luncher it wont work with trebuchet from CM9. I have a otg cable with usb hub currently with controller, ps3 controller(yes it works fine with usb cable to play deadtriger) 16gb usb with movies(use stick mount). I apreciate the effort of getting xbmc but I also think a full android rom is better
ohh I forgot use droidmote server is far better than tabletremote
Can't wait see what you come up with OP!
chrlop said:
I don't see why some off you are having problems controling the Q I only used adb once to root and navigate to get my stuff ready. Has far has a controller this is the best mouse keyboard combo I found small portable controll type http://www.ipazzport.com/16A.html is a full keyboard plus it already has the android buttons on it. there is a tutorial here how to redirect the home button to call that way goes to launcher instead of the screen saver thing(http://forum.xda-developers.com/showthread.php?t=1892359). Use nova luncher it wont work with trebuchet from CM9. I have a otg cable with usb hub currently with controller, ps3 controller(yes it works fine with usb cable to play deadtriger) 16gb usb with movies(use stick mount). I apreciate the effort of getting xbmc but I also think a full android rom is better
ohh I forgot use droidmote server is far better than tabletremote
Click to expand...
Click to collapse
Is there a driver needing to installed for the ipazzport keyboard?
Also could you theoretically attach at 1 TB hard drive over usb OTG, with stick mount?
This of any use?
Lokifish Marz said:
This of any use?
Click to expand...
Click to collapse
Loved your work on the Photon back when I had it. Really happy to see that you're working on the Q.
UKROB86 said:
Is there a driver needing to installed for the ipazzport keyboard?
Also could you theoretically attach at 1 TB hard drive over usb OTG, with stick mount?
Click to expand...
Click to collapse
No I don't think you could do that since we don't have a custom kernel, usb mount is built in in android, maybe if you format it fat 32 it could work, good luck. I tried https://play.google.com/store/apps/details?id=com.paragon.mounter&hl=en but it won't work.
For keyboard you don't need drivers android reads those input by default even with put root.
fiveipads,
If you are still active on this, I suggest we pool resources. If the deal goes through, I'll also have a Gnex to help aid in development in about a week.
OR
Please , please , pretty please still be deving on the Q. It's lonely in Q land and its driving me crazy. :silly:
Lokifish Marz said:
fiveipads,
If you are still active on this, I suggest we pool resources. If the deal goes through, I'll also have a Gnex to help aid in development in about a week.
OR
Please , please , pretty please still be deving on the Q. It's lonely in Q land and its driving me crazy. :silly:
Click to expand...
Click to collapse
I know how to build from source pretty well. But without sources for the Q I'm not sure how to get starte. If you take a glance at threads I have started you can see all of my work. PM me if you'd like. I would like to get in on this.
Welcome to the JynxBox HD and JynxBox HD Mini Super Thread
This thread is meant to collect all of the hacks/useful bits of info related to the JynxBox Android sticks and set top boxes.
Below are links to the various posts outlining what is known at this time.
Firmware Images Catalog: http://forum.xda-developers.com/showpost.php?p=37800174&postcount=2
Source Catalog: http://forum.xda-developers.com/showpost.php?p=37800183&postcount=3
Boot JynxBox HD STB into recovery: http://www.xbmcandroid.com/forums/jynxbox-android-hd-discussion/486.htm
Firmware Images
New images for the JynxBox HD and JynxBox HD Mini seem to pop up sporatically over time. This thread is meant to archive the different images released for both for archive / rollback purposes. Links and details below.
Note: upgrading the firmware may cause your device's data to be wiped. Happened to me on my JynxBox HD Mini.
BACKUP before running any updates, you've been warned
Install Instructions
Backup device
Download appropriate firmware image file from below (Some android browsers don't download fully from box, be mindful of file sizes)
Copy to the sd card of the JynxBox device
Rename file to update.img
Run the Update application from all programs
Select "From local storage"
Select update.img
Wait for install
Restore backup
Enjoy
JynxBox HD
2013-02-05: last_update_Hiolux_20130205.img
JynxBox HD Mini
2013-02-05: last_update_Hiolux_20130205.img
Sources
AMLogic Sources Site: http://openlinux.amlogic.com
Getting the source docs: http://openlinux.amlogic.com/wiki/index.php/Arm/Android/2.Getting_the_Source_Code
PivosGroup AMLogic Sources: https://github.com/pivosgroup
// Reserved 2
App Tweaks/Hacks
Netflix
Black screen / No video
Courtesy of Pivos Forums (http://www.pivosforums.com/viewtopic.php?f=14&t=1436)
Edit /system/build.prop and change tv.hideStatusBar.enable to false
Stuttering
Change you Netflix quality to the middle one. I had issues with the top quality setting.
So I have both the Jynxbox HD and also the mini HD.
Both came with a remote but the mini remote does not have the gyro or acts like a mouse.
Any ideas why the Jynxbox HD remote will not work on the mini except the power button?
I looked at the remote.conf in /system/etc and they are the same between the 2 models.
I have taken both your ROMs links above apart and I do not see the reason why? In fact both ROMs look 100% the same?
Build.prop model= the same device model. I think there is no difference between them that I can see.
Might be a hardware thing between them for the IR remote? Any ideas?
Also the remotes are NOT 2.4 as the specs say. Both are IR.
One thing I will say. Thanks for startin this thread. There is not much info on these devices out there! I am learning these devices the hard way!
Bob
finlessbob said:
Both came with a remote but the mini remote does not have the gyro or acts like a mouse.
Any ideas why the Jynxbox HD remote will not work on the mini except the power button?
I looked at the remote.conf in /system/etc and they are the same between the 2 models.
Click to expand...
Click to collapse
The HD remote needs the included USB dongle plugged in to work as a Gyro. If you plugin the dongle to the Mini it should behave like an airmouse/gyro.
finlessbob said:
I have taken both your ROMs links above apart and I do not see the reason why? In fact both ROMs look 100% the same?
Build.prop model= the same device model. I think there is no difference between them that I can see.
Might be a hardware thing between them for the IR remote? Any ideas?
Click to expand...
Click to collapse
I noticed they look 100% identical myself, but I wanted to post what I yanked from each device regardless. Gives the dev's more to play with in the end. The remotes should work with either device. I have both on the same desk and ended up discontinuing use of the remotes due to cross over.
finlessbob said:
One thing I will say. Thanks for startin this thread. There is not much info on these devices out there! I am learning these devices the hard way!
Click to expand...
Click to collapse
There is also some discussion happening on Freenode in the #xbmcandroid channel. AdamOutler, Entropy512 and I have been discussing some of the various bits the last few days.
exFAT Support
I can confirm an exFAT filesystem created from Windows 7, written to from Linux using the FUSE filesystem driver can be read on the JynxBox HD.
Hey there,
Been playing with the Jynxbox HD and Mini. I've been using a 3TB HDD for my local content and Jynxbox is able to read it. It's formatted to NTFS so I guess external HDD's up to 3TB and NTFS are supported.
Hope that helps someone out
Possible Video Decode Chip
Poking around the openlinux site that AMLogic maintains I found the below link. It looks like they are using a Synopsys ARC chip for video decode.
http://www.synopsys.com/IP/ProcessorIP/Pages/default.aspx
*Solved* (Make sure your tv set supports 1080p for the Jynxbox Android HD box.)
Anyone have an idea of LED colours on a successfull boot ?
Got all reds and nothing on tv.
Not sure if device is a dud or something else gone broke.
The jynx mini runs fine on same tv .
Sent from my GT-N7100 using Tapatalk 2
Has anyone tried a jellybean image on the android HD I would really love to see if it would work I hope for some developers to put in some work on this set top box its my favorite device next to my gs3
just got my jynxbox today and am having netflix streaming issues but im gonna play with this thing a bit and possibly create a rom for it
I think you can find a Netflix patch for jynxbox over at xbmcandroid.com.
Sent from my GT-N7100 using Tapatalk 2
blorro said:
Anyone have an idea of LED colours on a successfull boot ?
Got all reds and nothing on tv.
Click to expand...
Click to collapse
Not sure offhand. I don't believe mine changes the LED colors much, just shows them lit or flickering if memory serves.
DLM2583 said:
Has anyone tried a jellybean image on the android HD I would really love to see if it would work I hope for some developers to put in some work on this set top box its my favorite device next to my gs3
Click to expand...
Click to collapse
Not that I am aware of. Do you know of a possible candidate ROM to test?
There has been some discussion of building a Cyanogen based ROM... But, there is a lot of work that would need to go into it and a good copy of the kernel is going to be needed.
beanstown106 said:
just got my jynxbox today and am having netflix streaming issues but im gonna play with this thing a bit and possibly create a rom for it
Click to expand...
Click to collapse
There is a thread on pivosforums that outlines the fix for netflix. Having said that: I applied the fix and found the netflix playback to be a bit lacking. On the full quality setting I had a lot of stuttering and buffering problems. Dropping the quality down to a level resulted in pretty poor quality on my TV.
cwm
[do you know how to install cwm in jynxbox and replace the stock recovery rom manager wont do it and i just dont want to flash and brick it and thoughts
juggalodrew said:
[do you know how to install cwm in jynxbox and replace the stock recovery rom manager wont do it and i just dont want to flash and brick it and thoughts
Click to expand...
Click to collapse
Last I had heard there is not a clockwork recovery available for this device. Where did you find a cwm image (link if possible).
This is a version of the Linux image that works for Jynxbox Android HD and mini (wifi is not working on mini).
4Shared link
Megaload link
Here is a version of XBMC with Hardware Acceleration for the Jynxbox:
Megaload link
4shared link
DepositFiles link
Working well.
Here is the version from the Gbox modified to work on the Jynxbox. I found it on some other forums.
Deposit files link
Megaload link
4shared Link
Please discuss any issues with the first version.
This is a patch update file for the Jynxbox Android HD that will allow Netflix to works. Its not working full screen but at least you get to watch it.
Megaload link
4Shared link
When you run upgrade->local update, it will not list below files on Jynxbox Android HD box automatically, please press menu button on remote controls 8 times for it to show up.
I haven't tested it on the mini yet. But I assume it will works because both devices are the same build.
This is for Hulu Plus the Landscape version: LandscapeModHuluPlus.apk
I have attached a screenshot of the screen I get stuck at. I have no idea why it does this....Am I supposed to type something in here to get it to continue??
I have tried installing the 32 bit version also but nothing works.
I found a youtube video of a guy saying that it relates to the video card....His fix supposedly makes it use onboard video rather than the video card. Tried doing that but did not seem to work....Probably because switching to onboard video requires me to change my HDMI cable to the onboard port maybe??
Here is what says:
A N D R O I D [email protected]_x86_64:/ #
It just sits there with a blinking cursor
Any help would be appreciated.
FYI: I installed on one of my extra internal hard drives. Also..I tried two different versions and both had the same resulting screen.
I am on Windows 8.1 X64. with 12GB RAM
Using a GeForce GTX 670 video card if that matters.
While installing it says I have a write speed of 126 mb's or something per second
Thanks in advance
ASharpEdge said:
I have attached a screenshot of the screen I get stuck at. I have no idea why it does this....Am I supposed to type something in here to get it to continue??
I have tried installing the 32 bit version also but nothing works.
I found a youtube video of a guy saying that it relates to the video card....His fix supposedly makes it use onboard video rather than the video card. Tried doing that but did not seem to work....Probably because switching to onboard video requires me to change my HDMI cable to the onboard port maybe??
Here is what says:
A N D R O I D [email protected]_x86_64:/ #
It just sits there with a blinking cursor
Any help would be appreciated.
FYI: I installed on one of my extra internal hard drives. Also..I tried two different versions and both had the same resulting screen.
I am on Windows 8.1 X64. with 12GB RAM
Using a GeForce GTX 670 video card if that matters.
While installing it says I have a write speed of 126 mb's or something per second
Thanks in advance
Click to expand...
Click to collapse
I hit this issue when I did the installation on VMware. I enabled 3D acceleration and it did the trick. Hope this fix your issue.
Need help same issue..
I have the same issue.. Any fix for this please? I need help.. L
Roughnecks27 said:
I have the same issue.. Any fix for this please? I need help.. L
Click to expand...
Click to collapse
I was able to fix my problem.
My issue was that Remix OS would not work with my video card. If you have an onboard video enabled processor you may be in luck as I was.
All I had to do was go into my bios settings and enable my onboard video. Then plug in my monitor into the onboard video and it worked!!
In my bios I was able to set the settings to auto select. That was it would automatically work if a cable is plugged into it.
I hope this helps some people out.
Good luck!!!!
One more thing.....As you boot up it will ask you what OS you want to boot....Windows or Remix OS. This will show up on the video card input. Then when you choose Remix OS I just unplugged my HDMI from the video card and plugged it into the onboard and you will see it booting up to the Remix OS. If you have two monitors and two cables so both are attached I suppose you would not need to do this.
P.S. please hit the thanks button if I was helpful!!
Thank you...
ASharpEdge said:
I was able to fix my problem.
My issue was that Remix OS would not work with my video card. If you have an onboard video enabled processor you may be in luck as I was.
All I had to do was go into my bios settings and enable my onboard video. Then plug in my monitor into the onboard video and it worked!!
In my bios I was able to set the settings to auto select. That was it would automatically work if a cable is plugged into it.
I hope this helps some people out.
Good luck!!!!
One more thing.....As you boot up it will ask you what OS you want to boot....Windows or Remix OS. This will show up on the video card input. Then when you choose Remix OS I just unplugged my HDMI from the video card and plugged it into the onboard and you will see it booting up to the Remix OS. If you have two monitors and two cables so both are attached I suppose you would not need to do this.
P.S. please hit the thanks button if I was helpful!!
Click to expand...
Click to collapse
Thanks for this! Yeah i think i have a built-in video card in my processor so i hope it will work i haven't tried it yet due to busy schedule. By the way, may i know how to enable AUTO SELECT in bios settings that you said it would automatically work if a cable is plugged into my onboard.. Please it would be a big help because i am not that familiar with bios. I really appreciate you help and i hope your advice will work on my computer. Thank you.
This service is driving me crazy they have an offline viewing thing, but it won't let me output to a Fire stick or a basic HDMI, and there is no windows app This is a solution I have been considering to just install Android x86 on my laptop, but I just wonder if it would work, can someone verify this?
It seems not
Nope
buzz86us said:
This service is driving me crazy they have an offline viewing thing, but it won't let me output to a Fire stick or a basic HDMI, and there is no windows app This is a solution I have been considering to just install Android x86 on my laptop, but I just wonder if it would work, can someone verify this?
Click to expand...
Click to collapse
Disney+ v1.4.1 ( 2020-03-24 ) - PN: com.disney.disneyplus - runs only on Android devices with CPU-architecture arm64-v8 and/or armeabi-v7a
Hi All,
Below information is for the dev's on these boards that have the knowledge to create roms and use the SDK from below.
I hope we can spark a flame and reuse our S912.
I came accross the following android 9 Pie ROM that has been uploaded recently for the Khadas VIM2.
The VIM2 is a S912 board designed for Android TV and Ubuntu. https://docs.khadas.com/vim2/FirmwareAndroid.html
Download Link
The rom is flashed by me with Am Burning Tool on my X92 3G/12G and it booted.
The list that worked: Wifi, Ethernet, Bluetooth, Sound.
What did not work: Front Display, 1 out of 4 USB ports, the remote.
So far so good it runs smoothly.
Reserve second post
@minixfreak , @N'ayam Amarsh'e just tagging the developer for attention
I have TX92 3/32GB, This seems to be non LPRAM version, I was not able to flash it directly, I had to convert it to LPRAM, its now stuck in boot logo screen
At-least its booting
@whiteak Maybe willing to help?
testie the rom is S912 for teams 2 ram rom 16 to 32 has two details no wifi and rest bluetooh problem is functional and it is androi 9 real very fast for youtube advance
eagledipesh said:
@N'ayam Amarsh'e just tagging the developer for attention
Click to expand...
Click to collapse
Soon.
N'ayam Amarsh'e said:
Soon.
Click to expand...
Click to collapse
Nice, will be waiting, super celeron also released his rom yesterday...
there are a few roms that are working on S912 (i have a Sunvell T95Z Plus)
this is working, only the clock from front panel is not working, and led can't be turned off, the remote is working 100%, shut down/reboot, wifi/lan, bluetooth also works, both usb ports are working
https://drive.google.com/file/d/1l55zNFE_gXSifk9xTYFAFUMVj32ykzm4/view
Click to expand...
Click to collapse
this one
https://drive.google.com/file/d/1EEbwZnNrfWALWheH0vGOSRRg9WgUVXwn/view
Click to expand...
Click to collapse
(i converted it from lpddr3 to DDR4), there is root (SuperSU), the screen is blinking when i move the mouse cursor, bluetooth not working, wifi/lan working, clock from front panel not working,, no "white" settings, only from those from left side panel
and there are more variants here
https://daivietpda.com/2020/07/rom-atv9-android-9-0-cho-amlogic-s912/
Click to expand...
Click to collapse
Its 32 bit rom