hi every body
i have lenovo s60-a Mobile i just upgrade it to Android 5.0 from Android 4.4.4 by the way of update.zip from internal sd and so when i turn on it it show only lenovo logo for 2 3 second and then turn off with long vibration i have try many time to load the boot menu with all combination of power and volume button
but it turn off in the same way not loading recovery menu so what i can doo.
is there a way to install the all the boot menu on mobile
or how can i fix it.
Quote:
Originally Posted by FluXx95
Hello everyone.
I just got back from my holyday and searched everywhere, but couldn't find anything, so you guys are my last chance.
So my Lenovo S60a ran out of battery and when I got to the hotel and plugged it in to power, it got stuck at the LENOVO boot logo. After a few hours and several reboots, if finally "woke up", but I found out that it had no baseband and everything was missing... Like a factory reset. Since the phone still has warranty, I called my local Lenovo authorized service, explained them the problem and they told me to upgrade from 4.4.4 to 5.0.2 OTA, so the new baseband will flash over the unknows/unexistent one. I started the update and it got stuck at 75% for 15 minutes or so, then it shut down with a long vibration and that was it, like it's last breath.
I plugged it into QFIL and instead of Quallcom HS-USB QDloader 9008/9006, it appears as Marshall London HS-USB Diagnostics 9006.
I don't really want to get it to the service like my last phone, just to wait 2 weeks, call them and get the answer "We can't do anything, it's dead".
If it's just a problem that requires even a harder method of flashing, I am willing to try it.
Looking forward for help, apreciating any answer/oppinion and thank you in advance.
Hi try this if you didn't , before flashing Disable Driver Signature , you have videos on YT if you don't know how to do!
Downlad this firmware: Password : lenovo4
http://www.mediafire.com/file/v4lryqut16lom9f/Lenovo+S60-a+100%+tested+QPST+file.rar
QPST 2.7.422
http://www.mediafire.com/file/j4gcz64qjm63m86/QPST_2.7.422.rar
Qualcomm USB driver
http://www.mediafire.com/file/e4jz2a4g8lrjfmv/Qualcomm+USB+Drivers.rar
Instruction to flash
Extract the rom.
Open Qfil flasher.
Specify the file in Programmer Path the file will be prog_emmc_firehose_8916.mbn
Now in Load XML specify raw_program_unparse and patch file.
Now click select port and power off your mobile. Volume + and Volume – and then connect usb cable.
Selected port will show like relink HS-USB QD Loader 9008.
Now Press Download Button. After Flash Mobile Phone will be restart.
Credits for file : http://miraclesoftsolution.com
Good Luck
Related
Hi guys
I tried to install a custom ROM on my huawei ascend g610-u20 android 4.2.2 with mobileuncle tool
my phone was rooted but I forgot to unlock bootloader, anyway after rebooting phone with mobile uncle tool(and selecting recovery.img (CWM method)) it's gone in to a crazy state!!
I searched internet and I figured out that it's huawei boot loop :|, I downloaded the official ROM from huawei website and tried To flash it,
I get error 2004 ( I've installed Meditak Vcom and my device usb driver)
when I turn on my phone with battery it reboots every 5 second , so windows and sp flash tools can't recognize it.
I tried to flash it without battery,when I pressed volume down phone turned on by vibration and after a while it turned of by vibration again!
I can't access to bootloader menu when I press " volume up +volume down + power button" nothing happens! it just turns on phone!( and crazy loop boot circle happens again!)
I'm using windows 8.1 last update , every thing is Ok and my cable is Ok my sd card is Ok and I've downloaded Right ROM for my device(MT6589) and also I'm using sp flash tool last version!
**** I've got access to fast boot mode ****
My main problem is with Error 2004! help me out PLZ!
I couldn't put any screen shot cuz I'm a new user, Sry!
any idea?
Hey guys, I'm new to this site and I hope this is being posted in the correct area and I apologize if it's not.
Anyway, I have an LG Access 4G LTE StraightTalk android phone. The other day, I rooted it and everything worked fine and I was having a good time editing things and customizing. Last night, I download the Clockwork Recovery Mod app and my intention was to reboot into the CWR mode and install a zip file for a custom animation, (and yes, I know how simple it is normally, but this one required extra steps). Now, seeing as my phone is relatively new (February 2014 release) I figured I could've gotten a recovery module from a similar phone. Wrong! I'm pretty sure there was a warning that advised against it, but I didn't listen. I clicked "reboot into clockwork mode" and my phone screen went black and hasn't come back on at all. No power buttons, or combinations will work. However, when I took out my battery and plugged in my charger, it shows an empty battery with a charger plugged in and a large yellow triangle with a question mark in it. While it is in this state, if I hold the power on button or any other sequences, the screen goes black and displays the same symbol again. When I plug the battery into it, the symbol goes away, and nothing happens. Although, when I plug it into my computer with the battery inside and all, I can hear my computer making the "something is connected sound" then like 10 seconds after, "something was disconnected". You know, like when you plug and unplug a flash drive or something. It's also worth noting that I don't have an SD Card so all of my rooting and download was done onto my internal memory....... I'm boned right now. Can anybody help?
the same problem
I do some experiments with this phone to unlock
This phone realy is LG F70 D315
I stuck in Qualcom 9008
http://forum.xda-developers.com/lg-g2/help/lg-f70-d315-tracfone-download-mode-t3009244
Depending in what stage you leave it
what you see when conect to computer in the device manager?
corratge said:
I do some experiments with this phone to unlock
This phone realy is LG F70 D315
I stuck in Qualcom 9008
http://forum.xda-developers.com/lg-g2/help/lg-f70-d315-tracfone-download-mode-t3009244
Depending in what stage you leave it
what you see when conect to computer in the device manager?
Click to expand...
Click to collapse
I think you're confused. My phone won't turn on at all. The screen is black and it will not power on. I don't see anything in the device manager when it's plugged in. My laptop makes the sounds but nothing happens. And I read your post and to confirm, we both have the Straight talk LG F70, also known as the LG Access 4g LTE. So we have similar situations with the same phone.
Sorry I don't understand why you say i confused maybe my english is'nt good enought
My phone won't turn on at all even not batery image but in the device manager
I have Qualcomm, HS-USB QDLoader 9008
I break my phone because I do worst experiments and I know the consecuencies
I backup all original partitions I can give you if you find the way to restore it
this phone and all qualcom from nowdays has 2 dead modes 9008 & 9006
In this post explained
for the mode 9008 the oficial tool for all is QPST
rusian post about
If you check that nothing in the device manager you can have QHUSB 9008 mode but i cant do anything in it for the moment this mode is really hard to work it
The test point for this LG to force in 9008 go in atachment.
The only form I know to save your phone If you achived somethink like a disk with ext partitions that windows don't recognize when you conect to pc
I have the original recovery and then you flash it
I flash a custom recovery but this don't break the phone exept the recovery because
you have to unlock bootloader to do this and i did'nt
Also for a custom animation the only needed is root and is stored in /system/media/bootanimation.zip
Is there a thread for this phone anywhere?
Found one last night in a car I just bought, it is locked with PIN, no SIM card was dead so not a current phone and dude hosed me on car deal so a toy for me...
Wanted to at least get into phone to see if could get my active Tracfone SIM to use their network, phone died that it was in, if I could force my way into it somehow or figure out how to hard reset I would be in a much better place than I am now... Any other pages to look for help, or you guys know anything?
Tried the basics, power and - volume, just a reboot loop...
hey guys how i can enter recovery on my lg l31l or f70
Hello, after playing with my z90 (with the original rom that was Z90a40_USR_S118 international, bought in october 2015) I wanted to clean it up and make some updates. So I made my backups etc... Entered the recovery (not the green lenovo one wich is very limited) with hold vol - , I choosed to wipe (the phone was encrypted just to mention) all that I can and reset to factory, all was done but when it finished, it reboot and it stuck to initializing just after lenovo logo it reboot... initializing... and it s an inifinite loop. So I retryed to go to the maintenance recovery but it s not possible a black screen come and it reboot, I can go to the limited lenovo green recovery, but no factory reset, so I make the wipe datas etc... nothing... infinite reboot loop!
So I found some rom put them in the micro SD, go for an update.zip with the recovery, update work well but... initializing.... reboot...
Grrr, lenovo... So I take the big tools, installed a minimal win7 with qualcom drivers, lenovo ones, qpst. I tried many manipulation to enter the download mode with port com (I finaly managed multiple times with not the exact manipulation it s vol- + power + 10s and multiple spanning of the vol - button....) And I have succefully flashed multiple roms with qfil but with always the same results... initializing, reboot... I don t know where to search now, I someone can help me to find where to go, perhaps reflashing the recovery or I saw the .qnc in a russian forum but I can t understand one word.... 2 days of flashing make me hate my lenovo, my first brick with a phone . Any help?
Thanks,
sorry for my bad english
Steph
costeph said:
Hello, after playing with my z90 (with the original rom that was Z90a40_USR_S118 international, bought in october 2015) I wanted to clean it up and make some updates. So I made my backups etc... Entered the recovery (not the green lenovo one wich is very limited) with hold vol - , I choosed to wipe (the phone was encrypted just to mention) all that I can and reset to factory, all was done but when it finished, it reboot and it stuck to initializing just after lenovo logo it reboot... initializing... and it s an inifinite loop. So I retryed to go to the maintenance recovery but it s not possible a black screen come and it reboot, I can go to the limited lenovo green recovery, but no factory reset, so I make the wipe datas etc... nothing... infinite reboot loop!
So I found some rom put them in the micro SD, go for an update.zip with the recovery, update work well but... initializing.... reboot...
Grrr, lenovo... So I take the big tools, installed a minimal win7 with qualcom drivers, lenovo ones, qpst. I tried many manipulation to enter the download mode with port com (I finaly managed multiple times with not the exact manipulation it s vol- + power + 10s and multiple spanning of the vol - button....) And I have succefully flashed multiple roms with qfil but with always the same results... initializing, reboot... I don t know where to search now, I someone can help me to find where to go, perhaps reflashing the recovery or I saw the .qnc in a russian forum but I can t understand one word.... 2 days of flashing make me hate my lenovo, my first brick with a phone . Any help?
Thanks,
sorry for my bad english
Steph
Click to expand...
Click to collapse
Hi,
here is my solution if can help.
I had on my vibe shot s208 rooted ROW. It stacked after SU update in boot loop.
1. I did wipe data without formatting from recovery mode (Vol+ and Vol- and Power button. When Logo is on release power button and hold Vol+ and Vol - until you are in recovery mode). STILL boot loop.
2. I did wipe data with formatting from the same menu. - STILL boot loop.
3. I did factory reset from recovery menu (Vol - and Power after logo is on release Power and hold Vol - until you get recovery mode) - STILL boot loop.
Then I did next:
1. I downloaded and installed QFIL (QPST_2.7.422) - I am not allowed to post links yet.
2. I have connected OTG adapter to phone. Phone was off.
3. then connected OTG to PC. It was some HDD activities but I did not hear any sound.
4. press Vol- for as long as something is going on - HDD activities. Then I think came up sound too - but not sure.
5. I had installed Qualcomm USB drivers from before I suppose.
6. Because I couldn't see my device as ...908 I disconnected and connected again usb cable... then I got my device as ...908 in device manager, but it was written "RECONNECTED" or similar in front of word "QUALCOM".
7. Then just follow instructions for QFIL. and ROM will be installed.
First I have installed INTERNATIONAL no root ROM. But because I needed phone to be rooted in order to use data recovery software I flashed again with s240 ROOTED. When I flashed second time I did not use OTG, just direct usb cable connection to PC, and my phone was again recognized after I reconnected usb cable and in device manger was "RECONNECTED" in front of word "QUALCOM".
Hello, thanks for replying. But I already tried all the roms with qfil, they were successfully installed as wtih miflash but I always got a initializing boot loop... Unfortunately I tried some other method, I successfully erase all partitions, I m now in 9006 mode with a long vibration on start and I cant do anything now No flashing works anymore... I ll try some stuff when I had a little time.
did you find a solution ?? , cause I have the same problem ... tried everything, adb or cwm recovery won't work cause my device is not rooted nor the usb debugging is on .. so am stuck with this "initializing loop".. flashing didn't solve it for me, I tried every ROM I could find, rooted or not .. nothing .... this problem happened with my phone after wiping user data and trying to restore QCN, cause before this problem I had another one with network services, tried to solve it, and here I am, from bad to worse
Hello,
I had the same problem. I tried with QFile and MiFlash but unfortunately without success. will you a track ?
I reinstalled the drivers QDLoader HS- USB Driver. I maintained volume + for 3 seconds , however, nothing happens ! (Before it worked ) I also tried adb reboot eld the prolème is the USBport phone is not known !
I followed the procedure of DejXDA carefully until the end staying press the VOL- the phone starts to recharging battery ... have you others sollutions ? thanks in advance.
Hey there !
Same problem for me... The solution may be to rebuild the partition table, but we need a working phone, and a backup with QPST.
Would anyone post a *.qcn file from his phone, made with QPST Software Download ? or a *.hex ?
And the user partitions ? Or a factory image (*.mbn) ?
Any gurus here, what would you advise for that problem ? Would using QPST properly work ?
Cheers !
Z90-7 (Z90a40) unbricked (at last...)
Hello!
After days and days of fails, my Z90-7 is unbricked!
How?
Just follow the OTG cable method, but copy in the SD card, in the sdfuse folder, this image:
Z90a40_S209_150716_ROW.qsb
You can download it from russian forum*, freely.
*I'm not allowed to post links, but enter the exact reference (Z90a40_S209_150716_ROW.qsb) in Google search (don't accept the Google's proposition to correct it), the link is the first answer. Use Google trad as I did if you don't speak russian .
Hello ,
I have a Lenovo vibe shot Z90-7
I wanted to set an international Rom 5.1 and now since it gets stuck on initializing indefinitely.
I have access to the recovery mode so I spend not to turn off the phone.
I Agency will proceed as this I put out the létélphone I press the volume + and I connect it to the ordidateur to put in download mode, but there is nothing after it launches in initializing .
So I essyer with presses of flight - and connects to the PC and it remains on the Lenovo logo.
In prériphérique manager there wrote lenovo ADB android.
Can not have Qualcomm hs -usb in the Port . even after installing the driver.
you have an idea what I can do?
Thank you
z90-7 not working
Hi,
i tried to install 20150619_VIBEUI_V2.5_1525_5.404.1_ST_Z90-7-Root_Phoenix rom on my lenovo vibe shot using Qfil , After Qfil finished flashing the mobile shutdown and It does not turn on anymore
and computer does not recognize it anymore.
what can I do??
I bought swipe elite plus today ..
And when I power up
With "power key + valume key"
Now its won't open
After swipe logo its stuck in blinking clear black display
Please help me
Im facing the same issue.
Please let me know if you were able to fix it.
I had yhe USB debug mode off when my phone crashed. The recovery is also corrupt. Nothing hets displayed after Volume up + power.
Phone is not detected by the computer, so cant use QF
Swipe Elite Plus Fully Wiped "No OS" Stuck on Swipe Logo
As for now reaching every corner of my no OS issue I can Quote sure problem happend to my device.
I really want to explain everything how it happed. Firstly
1.I bought Swipe Elite Plus 2 monts back, everything was fine but then suddenly after one week using at the mornig time I see Phone shutting down after every 2 to 4 min.
2. When I head to settings "about phone" phone backs to home screen if I swipe to and fro 5 to 6 time device switch offs' .
So wasn't stepping towards flashing .... before flashing what I did was
1. reset.. then hard reset... switch off hold volume + and Power button bootloader hardreset. Evrything done but the result was same (hangs /switch off).
2. In recovery mode i can see 9 times reset logs.. gave up..then
I googled for stock rom... I could not find for first 1 month or two until now...
3. Then I downloaded stock rom for this device (Swipe Elite Plus) found from previously posted swipe forums links (google drive), Drivers, Tools, and Stock Rom...everything.
4. But I get... sahara Fail...this is not possible with Sahara protocol..
#
# Tried several times.. changing ports...Qualcom driver installation.... everything was right (doubted driver problem ~but tried everything/manual port driver update to Qualcom.... QLoader 9008)...
# But sahara Fail.... Cannot procced with sahara protocol....
---------------------
Read forum.... thought to root....rooted with iroot(not sure rooted or not rooted) however TWRP flashed... and wiped everthing now no OS....
# No way to connect to pc. I can hear connection (sound) when i plug in usb to phone then phone switch on and stuck on swipe elite plus logo..
# however I can enter to TWRP recovery by volum up + power button...and When I go to "power off" from reboot option in TWRP phone offs' then on again and stuck on swipe logo, while usb cable is still connected and I can hear connection sound but no signs (nothing) of device at "Device Manager"....
#Can I have any ROM/CM to flash from internal memory as I can still access Internal storage (through PC) in TWRP mode and rooted...??.I will try...
#Do I need convert emax mini/ TCL M3G ..?? But no way to usb connecion??? only sound...( I am Using win7 32bit)
Any Links to flash file plz....????
My swipe elite plus wont boot
Well.. somehow I have QFIL flashed the TCL M3G rom following the UMI forum tutorial..
But I can not restore QCN backup (Downloaded from given link 216kb) bcz.. Port is not Showing 9091 com port.... When I go to QFIL>>Tools tab>>backup /restore>> then select the downloaded QCN file then backup and restore button is inactive...I know it bcz of com Port ....QDoader 9008(COMxx)...
# But then If I try to Switch on it Stuck on Small Linux logo (No more Swipe Elite Plus/phone changed to TCL M3G)...And sometimes Loads big "Android" Logo for 1 or 2 then shuts down and nothing happens.... I can boot to bootloader....TWRP is Gone...
# I did try to flash the stock rom found at aplush.xyz but this time it is again Sahara Fail...Sahara..Fail...
What Can I do...??? :fingers-crossed::fingers-crossed::fingers-crossed:
anuragkumar19 said:
I bought swipe elite plus today ..
And when I power up
With "power key + valume key"
Now its won't open
After swipe logo its stuck in blinking clear black display
Please help me
Click to expand...
Click to collapse
I am also facing same problem
This happened everytime whenever i tried to hard reset
May be flashing custom rom will help
Bt im afraid if while processing it may cause the same problem
problem of swipe elite plus hang on logo and screen blinks
guys first tell me if your phone is rooted or not
if your phone is not rooted then try the below steps
download swipe elite plus firmware
download android usb driver
download qualcomm driver
download QPST
move the swipe elite plus firmware to the following path:-my computer/local disc(C)/program files/qualcomm/QPST/bin
then you will not encounter sahara error
now press and hold volume+ and volume- button at atime and connect usb cable simultaneosly
you will entert diwnload mode
now provide qualcumm driver path and open QPST AND flash your firmware
enjoy
I rooted my swipe elite plus with Kingroot and uninstalled some system apps and also apps provided bt swipe.....Then..there was no problems and i've restarted several times after i rooted and uninstalled the system apps...but when i uninstall Kingroot (unroot) Then my phone got stuck on Swipe logo ...I tried hardreset (volumup+power) But didt work again stuck at the logo..What Can i do please help
from ,
jahir ali abbas
pallapatti karur district tamilnadu.
To,
swipe elite plus MD
swipe mobile
unrespected sir,
this is a worst mobile i have ever had. bakwas mobile. china company. not booting whats the solution u fellows.
"download fail firehorse fail fail to load qdloader port after switch" plz help.
"download fail firehorse fail fail to load qdloader port after switch" plz help.
---------- Post added at 12:03 PM ---------- Previous post was at 11:52 AM ----------
"download fail firehorse fail fail to load qdloader port after switch" plz help.
Swipe elite plus blank screen even after successful flash with stock rom
My swipe elite plus show blank black screen, even after several times flashing with stock rom... What should i do... When i use ADB commands, it shows null device. Kindly help me..
... I also tried it to flash with videocon v502830 rom.. But after 36% completion, it shows nprg error.. Or 5002...but phone status appears to be rooted while this flash.
Have you tried going "NUCLEAR" Android=>> ♧♧♧ !!!
IDK if code works on iOS, other OS. After W 8.1, I went in 2010 to 2.2 -> 8.1 now on Pixel 2(loved it, native OS w/No bloat like Samsung & never went back -> Android/Chrome). Code as follows.
*2767*3855#
It's a complete wiping of your mobile also it reinstalls the phones firmware(in XDA forum). "Work for me with 'normal' FRR or HR -> 'no joy' or for non-military means 'nothing' -> Mech Engr/CS B.S. degrees. If you are ~XDA, your risk, ask the Mods or leads for XDA if my suggestion is ok"!
Hello. I have a problem. I updated my Huawei G6 to the B189 firmware (that one famous for bricking)
The update halted and the phone is now showing as qualcomm hsusb 9008. I tried every flashtool, but nothing works. Please help
Do a Factory Reset
Cant do factory reset
The phone is hardbricked that means its like dead but it isnt so i cant access recovery, fastboot or turn the phone on
See if QPST, mostly QFIL can fix it. Should be able to. Having your firmware in the right format may be your biggest hurdle.
QPST and QXDM:
https://drive.google.com/file/d/18JDdJeMWk7phGaaURgLb0y3wBFvdfpTa/view?usp=sharing
Use at your own risk. May need to turn off real-time protection
Also, try holding vol- and power for as long as 5 minutes. I waited about 4 and a half minutes to get a Note 8 out of edl. Not saying it'll work, but if it does you'll likely need to hold on to those 2 buttons a lot longer than you think you should.