I bricked my redmi note 3, please help - Xiaomi Redmi Note 3 Questions & Answers

I got my redmi note 3 officially unlocked and flashed zcx twrp, but when I tried to flash xiaomi.eu, I deleted the emmc_appsboot.mbn from the rom, it is my mistake. Now my phone cann't start at all.
when I boot into fastboot mode, I can see the bunny but my computer can not find the phone so I can not go to edl mode.
when I turned off the phone and connect it to computer, it shows as 900e instead of 9008 in device manager. I tried the method in http://en.miui.com/thread-274589-1-1.html, but it did not work. Is there anyway I can bring the phone back to live? Thanks.

The only way to save your phone is to flash whole ROM by fastboot ROM.
Following every steps described here and do it carefully: http://en.miui.com/a-234.html
Good luck !

Kris Chen said:
The only way to save your phone is to flash whole ROM by fastboot ROM.
Following every steps described here and do it carefully: http://en.miui.com/a-234.html
Good luck !
Click to expand...
Click to collapse
Thanks, but fastboot does not work on my phone right now.

Hello.
So you can access to fastboot so thats it you just need fastboot to edl command. I actually face the same issue way before and what i did I connect my redmi to pc in fast boot mode and run the command which is in this file.
http://forum.xda-developers.com/and.../guide-how-to-reboot-to-edl-fastboot-t3394292.
Press thank if i help you anyway

Do you know how to make your phone enter fastboot mode ?
1. Power off your phone first
2. Press button of [volume-] + [power] together
If you still cannot enter fastboot mode, that means your phone is dead.
maquechen said:
Thanks, but fastboot does not work on my phone right now.
Click to expand...
Click to collapse

I think you need to open the unit and connect the two points of the battery and it will appear in the device manager 9008. It has tutorials on how to do this.

If your phone able to enter fastboot mode, then you should do:
check your bootloader wether it's locked/unlock. If it's shown locked, try to unlock it using unlock tool.
I am pretty sure your bootloader locked again caused by flashing miui.eu rom without flash lazyflasher afterwards.
If unlock tool can't help you then you need to use reboot to edl app tool and flash it using miflash.
If reboot to edl still can't help, then the safest way is using deep flash cable to unbrick your phone. No need to open your phone to do this.
maquechen said:
Thanks, but fastboot does not work on my phone right now.
Click to expand...
Click to collapse

Mattsantana said:
I think you need to open the unit and connect the two points of the battery and it will appear in the device manager 9008. It has tutorials on how to do this.
Click to expand...
Click to collapse
Thanks, I think so too and already opened the unit. Do you happen to know the exact location of the two points? I found a video about it but it is not very clear.

You can try this
https://www.youtube.com/watch?v=g0xWYvmj4aE
I follow that video and success unbrick my Redmi Note 3.

Pc driver signature enable?
Open cmd
Run in administrator
Type this & enter
bcdedit /set testsigning on
Restart ur pc
Done

Related

Need help with bricked Redmi Note 3 Pro (Kenzo/Snapdragon)

Dear Community,
I got my Note 3 Pro Snapdragon Version today and I tried unlocking the bootloader, installing root and TWRP.
Unfortunately after I installed TWRP, WiFi didnt work anymore so I wanted to go back to where I was before.
i tried flashing the GlobalRom with the MiFlash Tool but somehow I'm now stuck with a bootloop.
The phone starts up and shows the MI Logo but doesnt go on. I tried booting TWRP temporarily via fastboot commands so that I can try to flash flashable zip files
but it doesnt let me execute "fastboot boot xyz.img" anymore because my device is locked.
I would really love to hear any solutions or ideas. I dont want any root or something anymore. If someone has an idea Im very happy!!!
thanks a lot in advance and tell me if you need any more infos
Paul/shisaya24
1. keep vol + and vol - pressed while connecting USB to enter adb mode
2. check if phone is connected with "adb devices" in command line, if phone shows up, enter "adb reboot edl"
3. now you can flash via MiFlash
Alex3oe said:
1. keep vol + and vol - pressed while connecting USB to enter adb mode
2. check if phone is connected with "adb devices" in command line, if phone shows up, enter "adb reboot edl"
3. now you can flash via MiFlash
Click to expand...
Click to collapse
First of all, HUGE thanks for your fast answer!
Unfortunately I couldnt get this to work. Since I am stuck at the Logog screen here is what I tried:
Pressing both volume buttons while Logo Screen and plugging USB.
Pressing both colume buttons while fastboot screen is up.
These two didnt enter adb mode, I guess because of the bootloop I'm in
I also tried antering recovery mode with volume up + power button. Pressing both volume buttons didnt help either but when I am in recovery like that it shows my device in adb as "sideload" device.
Maybe that helps ? Can you give further advice or am I doomed?
My idea would be: Is it possible to reflash the device completely only usinf fastboot? The only thing I seem to be able to enter is fastboot...
Is there a way from fastboot to "working phone" ?
or maybe through the "adb sideload" state?
thanks a lot in advance!
Paul
EDIT
tried installing via "adb sideload xyz.zip" command but after shortly showing a status bar on phone screen it aborted and said "Total xfer: 0.00x" on PC screen .
Also: I read "adb reboot edl" brings you to download mode so you can flash something. Tried it but the phone just rebooted the normal system, so it stuck on Logo again...
search miui forum for unbrick, there is 2 or 3 method without opening your device
exp: http://en.miui.com/forum.php?mod=viewthread&tid=257227
Unfortunately they all do not work because they always require either a phone in download mode, and i only get to fastboot and adb sideboard or they require flashing something via fastboot but I can't do that either because it says my device is locked if I try...
Any suggestions how to flash a ROM with fastboot only or with adb sideload?
Thanks a lot
Paul
shisaya24 said:
Unfortunately they all do not work because they always require either a phone in download mode, and i only get to fastboot and adb sideboard or they require flashing something via fastboot but I can't do that either because it says my device is locked if I try...
Any suggestions how to flash a ROM with fastboot only or with adb sideload?
Thanks a lot
Paul
Click to expand...
Click to collapse
I Had The Same Issue Brother ! There are only 2 Things which you can do now .
1. Test Point Method to enter EDL
2.Give it to Service Center . I Gave Mine to Service Center ,They Fixed it in 30 mins or less and it was free
Dharani_V said:
I Had The Same Issue Brother ! There are only 2 Things which you can do now .
1. Test Point Method to enter EDL
2.Give it to Service Center . I Gave Mine to Service Center ,They Fixed it in 30 mins or less and it was free
Click to expand...
Click to collapse
Can I do the test point thing myself or is it risky?
What kind of service center? A general mobile phone repair shop or a Xiaomi special one?
shisaya24 said:
First of all, HUGE thanks for your fast answer!
Unfortunately I couldnt get this to work. Since I am stuck at the Logog screen here is what I tried:
Pressing both volume buttons while Logo Screen and plugging USB.
Pressing both colume buttons while fastboot screen is up.
These two didnt enter adb mode, I guess because of the bootloop I'm in
I also tried antering recovery mode with volume up + power button. Pressing both volume buttons didnt help either but when I am in recovery like that it shows my device in adb as "sideload" device.
Maybe that helps ? Can you give further advice or am I doomed?
My idea would be: Is it possible to reflash the device completely only usinf fastboot? The only thing I seem to be able to enter is fastboot...
Is there a way from fastboot to "working phone" ?
or maybe through the "adb sideload" state?
thanks a lot in advance!
Paul
EDIT
tried installing via "adb sideload xyz.zip" command but after shortly showing a status bar on phone screen it aborted and said "Total xfer: 0.00x" on PC screen .
Also: I read "adb reboot edl" brings you to download mode so you can flash something. Tried it but the phone just rebooted the normal system, so it stuck on Logo again...
Click to expand...
Click to collapse
I've been facing the same (or a similar?) problem about a week ago but managed to get out. Knowing me for having a head like a sieve I made some notes, sadly quite rudimentary
Did you try to flash with MiFlash after "adb reboot edl"? If I remember rightly after "adb reboot edl" you got the logo like booting another way, but the light is blinking red. Then I could flash via MiFlash.
I'm quite sure that if you get a "reboot" after entering "adb reboot edl", your phone will be in edl mode.
I will try that this evening when I am at home again and report. Thanks
Alex3oe said:
I've been facing the same (or a similar?) problem about a week ago but managed to get out. Knowing me for having a head like a sieve I made some notes, sadly quite rudimentary
Did you try to flash with MiFlash after "adb reboot edl"? If I remember rightly after "adb reboot edl" you got the logo like booting another way, but the light is blinking red. Then I could flash via MiFlash.
I'm quite sure that if you get a "reboot" after entering "adb reboot edl", your phone will be in edl mode.
Click to expand...
Click to collapse
Unfortunately this doesnt work. Phone reboots and shows MI Logo but red light doesnt blink and MiFlash doesnt recognize any devices.
Do you have another idea? :/
How did you unlock the bootloader, via official permission or that unofficial hack?
Sent from my Moto G using Tapatalk
I didnt use the official way :/ Im so hoping my phone isnt broken. I wish i owuld have been more patient
shisaya24 said:
I didnt use the official way :/ Im so hoping my phone isnt broken. I wish i owuld have been more patient
Click to expand...
Click to collapse
Only options you have right now are:
1) using test points method which is a but cumbersome and voids warranty if you care about that.
2) go to a xiaomi service center of you have any nearby.
It is hard bricked.
So there is absolutely no option to unlock bootlader via adb sideload or fastboot ?
shisaya24 said:
So there is absolutely no option to unlock bootlader via adb sideload or fastboot ?
Click to expand...
Click to collapse
Apparently, no! Whenever using unofficial methods, read precautions carefully and you missed all as I can see. Wait if someone can help you out.
apply official unlock. then unlock your device from fastboot mode.
asaharaSK said:
apply official unlock. then unlock your device from fastboot mode.
Click to expand...
Click to collapse
That sounds nice and easy. I already applied for official unlock.
But: do you know if u can use the official unlock now? I can only access fastboot and adb sideload mode. Is it possible to activate official unlock from there? Or do I need a working ROM rather?
I would have thought that official unlock doesn't work from fastboot /adb sideload...
shisaya24 said:
That sounds nice and easy. I already applied for official unlock.
But: do you know if u can use the official unlock now? I can only access fastboot and adb sideload mode. Is it possible to activate official unlock from there? Or do I need a working ROM rather?
I would have thought that official unlock doesn't work from fastboot /adb sideload...
Click to expand...
Click to collapse
Does anyone know this?
I have the same problem. I made the same mistakes as shisaya24. I have followed every procedure for unbricking and nothing works. I even applied for an unlock code and got it from Xiomi. I used their mi-unlock app which requires fastboot (pwr/vol-) but it gets to 50% and bombs out. It states it can't verify the phone. Can anyone please help me??
smiley1960 said:
I have the same problem. I made the same mistakes as shisaya24. I have followed every procedure for unbricking and nothing works. I even applied for an unlock code and got it from Xiomi. I used their mi-unlock app which requires fastboot (pwr/vol-) but it gets to 50% and bombs out. It states it can't verify the phone. Can anyone please help me??
Click to expand...
Click to collapse
out of sheer desperation I tried MiPhone again and after a few tries, MiPhone started updating the OS. My phone now works again and I have an unlock code as well.

[Redmi 3S] EDL Doesn't work?.

Hi everyone, i cant enter to EDL mode, i need it because my stock rom is unstable(All start with OTA update), after update it show me "unfortunately android.... has stopped " every 3-5 seconds. EDL works fine yesterday and i try to install fastboot rom, but since MiFlash get error when i install fastboot rom i cant reboot in EDL. Hope you can help me.
note: I try reboot trough fastboot and do same thing as the video.
youtube. com/watch?v=gPh1yE3or8g&feature=youtu. be
(Sorry for the video post, but i cant find something like this case in web and i really need help)
Hkoup said:
Hi everyone, i cant enter to EDL mode, i need it because my stock rom is unstable(All start with OTA update), after update it show me "unfortunately android.... has stopped " every 3-5 seconds. EDL works fine yesterday and i try to install fastboot rom, but since MiFlash get error when i install fastboot rom i cant reboot in EDL. Hope you can help me.
note: I try reboot trough fastboot and do same thing as the video.
youtube. com/watch?v=gPh1yE3or8g&feature=youtu. be
(Sorry for the video post, but i cant find something like this case in web and i really need help)
Click to expand...
Click to collapse
If you are using REDMI 3S/ 3S Prime then follow these steps to boot in to the edl mode
step 1 Download and extract MI unlock tools on your pc
step 2 Go to fast-boot mode by pressing vol down+ power button of your phone>connect it to pc via data cable>open extracted folder of mi flash tools (I recommend you to use the fast boot files which are available with mi unlock tools so you need to download mi unlock tool and extract it with the help of winrar ) press shift and right click then click on command prompt
and type these commands
fastboot devices
Press enter
fastboot oem edl
press enter
Now you are in Edl mode...enjoy....

Fastboot mode disappeared in 10 seconds...How to solve

When I'm try to boot in fastboot mode the fastboot mode (volume down+power) will only display for about 10 seconds and then it will reboots itself into charging mode. doesn't matter if i use the key, or even use adb commands to get there. it will still reboot itself in short period of time.
why is this happening? i just want to unlock my bootloader thats all...
Please help me... thanks in advance....
Smart Sujoy said:
When I'm try to boot in fastboot mode the fastboot mode (volume down+power) will only display for about 10 seconds and then it will reboots itself into charging mode. doesn't matter if i use the key, or even use adb commands to get there. it will still reboot itself in short period of time.
why is this happening? i just want to unlock my bootloader thats all...
Please help me... thanks in advance....
Click to expand...
Click to collapse
Your computer is unable to detect the phone in fastboot mode. Uninstall and reinstall the fastboot drivers, the proper ones. If successfully detected it should not be rebooting.
Cheers
ArK96 said:
Your computer is unable to detect the phone in fastboot mode. Uninstall and reinstall the fastboot drivers, the proper ones. If successfully detected it should not be rebooting.
Cheers
Click to expand...
Click to collapse
I just try this...but nothing happened...
Smart Sujoy said:
I just try this...but nothing happened...
Click to expand...
Click to collapse
That ten seconds when phone is turned on in fastboot and connected to computer quickly type this command in command prompt without the quotes
" fastboot devices "​If a device with device number shows up fastboot drivers are installed correctly or else if nothing shows up fastboot drivers are not installed properly..so check them.
Smart Sujoy said:
When I'm try to boot in fastboot mode the fastboot mode (volume down+power) will only display for about 10 seconds and then it will reboots itself into charging mode. doesn't matter if i use the key, or even use adb commands to get there. it will still reboot itself in short period of time.
why is this happening? i just want to unlock my bootloader thats all...
Please help me... thanks in advance....
Click to expand...
Click to collapse
i actually watched this video, to unlock my bootloader
https://youtu.be/dDRC-J-cLlE
Smart Sujoy said:
When I'm try to boot in fastboot mode the fastboot mode (volume down+power) will only display for about 10 seconds and then it will reboots itself into charging mode. doesn't matter if i use the key, or even use adb commands to get there. it will still reboot itself in short period of time.
why is this happening? i just want to unlock my bootloader thats all...
Please help me... thanks in advance....
Click to expand...
Click to collapse
Im having this issue now on my redmi note 4x.
Do you have a solution? Thanks
Man, you need adb bootloader interface installed properly.
Open device manager, and you'll see something popping out when you connect your device to pc on fastboot mode, there you can see what's wrong. So all you need is update that wrong driver (the one that popped out once you connect your device in fastboot mode) and install redmi note 4x driver, just ignore your disappearing fastboot mode in your device, keep install it. You should have your redmi note 4x driver prepared btw, you can google it.
Good luck!
use USB2 port, do not use USB3
Smart Sujoy said:
When I'm try to boot in fastboot mode the fastboot mode (volume down+power) will only display for about 10 seconds and then it will reboots itself into charging mode. doesn't matter if i use the key, or even use adb commands to get there. it will still reboot itself in short period of time.
why is this happening? i just want to unlock my bootloader thats all...
Please help me... thanks in advance....
Click to expand...
Click to collapse
Update your redmi note 4 driver in PC through a software called driver booster.... It's free
AtheistZ said:
Update your redmi note 4 driver in PC through a software called driver booster.... It's free
Click to expand...
Click to collapse
NO ADS!!!!
and2nckiko said:
Im having this issue now on my redmi note 4x.
Do you have a solution? Thanks
Click to expand...
Click to collapse
That is because your computer does not make any connection with your phone. Are you sure that you have all drivers installed. You can install fastboot drivers with mi flash tool but before that write this command in an admin cmd - bcdedit /set TESTSIGNING OFF and reboot. Now you can now install the fastboot driver from mi flash tool and try your luck
ArK96 said:
That ten seconds when phone is turned on in fastboot and connected to computer quickly type this command in command prompt without the quotes
" fastboot devices "​If a device with device number shows up fastboot drivers are installed correctly or else if nothing shows up fastboot drivers are not installed properly..so check them.
Click to expand...
Click to collapse
Bro my bootloader is already unlocked but my phone still restarts after 10 second i did not connected to any usb still it restarts i updated magisk today and now nothing is working in my phone no call incomming and outgoing audio is fully disabled when i turn on audio in any app it crashes or freezes i tried to factory data reset my phone but nothing works plzz help me broo
Leeeop90 said:
Bro my bootloader is already unlocked but my phone still restarts after 10 second i did not connected to any usb still it restarts i updated magisk today and now nothing is working in my phone no call incomming and outgoing audio is fully disabled when i turn on audio in any app it crashes or freezes i tried to factory data reset my phone but nothing works plzz help me broo
Click to expand...
Click to collapse
My root is also lost
JustExperimentingRedmi said:
That is because your computer does not make any connection with your phone. Are you sure that you have all drivers installed. You can install fastboot drivers with mi flash tool but before that write this command in an admin cmd - bcdedit /set TESTSIGNING OFF and reboot. Now you can now install the fastboot driver from mi flash tool and try your luck
Click to expand...
Click to collapse
So drivers are needed for fastboot flashing a xiaomi phone?
Why I didn't need drivers to use fastboot with other phone manufacturers?
In these phones (oppo, op) the phone stays in fastboot mode until you exit or shut it down.
I think xiaomi did a bad move with this.
───────
EDIT: It works in debian without any additional drivers.
Fastboot recognizes the xiaomi phone with "fastboot devices" command.
So it was as you said.

ZTE Blade v9 no Fastboot only Ftm

I want to unlock the bootloader on my ZTE Blade v9 but i can only boot normal in recovery mode and in ftm (Factory Test Mode). In Ftm i can use adb but not with root and without fastboot. If i type in adb "adb reboot bootloader" , its just an normal reboot. When i select reboot to bootloader in the recovery mode too. I can go in Edl on my phone too when i press both volume buttons. So is there a way to go in fastboot? Sorry for my bad english i am german.
Fastboot commands basicallly only work if device's bootloader is unlocked. You do this via enabling in Android Settings -> Developer options -> "OEM unlock", restart device, and run commands
Code:
fastboot devices
fastboot flashing unlock
and again restart device.
The thing is I can't boot into fastboot.
The thing is i can't boot into fastboot.
Kiwilikecookies said:
The thing is i can't boot into fastboot.
Click to expand...
Click to collapse
What do you want to express with this? Do you mean you can't boot into device's bootloader mode?
Code:
adb devices
adb reboot fastboot
What error message do you get when doing what?
Please clarify.
Kiwilikecookies said:
I want to unlock the bootloader on my ZTE Blade v9 but i can only boot normal in recovery mode and in ftm (Factory Test Mode). In Ftm i can use adb but not with root and without fastboot. If i type in adb "adb reboot bootloader" , its just an normal reboot. When i select reboot to bootloader in the recovery mode too. I can go in Edl on my phone too when i press both volume buttons. So is there a way to go in fastboot? Sorry for my bad english i am german.
Click to expand...
Click to collapse
At 4pda is instructions, using service firmware's aboot
ZTE Blade V9 - Обсуждение - 4PDA
ZTE Blade V9 - Обсуждение, Смартфон, 5.7"
4pda.ru
Mentioned here: https://romprovider.com/zte-blade-v9-twrp/
jwoegerbauer said:
What do you want to express with this? Do you mean you can't boot into device's bootloader mode?
Code:
adb devices
adb reboot fastboot
What error message do you get when doing what?
Please clarify.
Click to expand...
Click to collapse
It's only a normal reboot
CXZa said:
At 4pda is instructions, using service firmware's aboot
ZTE Blade V9 - Обсуждение - 4PDA
ZTE Blade V9 - Обсуждение, Смартфон, 5.7"
4pda.ru
Mentioned here: https://romprovider.com/zte-blade-v9-twrp/
Click to expand...
Click to collapse
Thanks i am going to check it out now
Kiwilikecookies said:
Thanks i am going to check it out now
Click to expand...
Click to collapse
I am not able to download the tools.zip file. So what can i do then?
Kiwilikecookies said:
It's only a normal reboot
Click to expand...
Click to collapse
Have you ever tried this?
jwoegerbauer said:
Have you ever tried this?
Click to expand...
Click to collapse
I saw that so often there is not physical camera button or home button. Only a normal camera and with Android a navigation bar. and with Volume + i get in recovery mode and with Volume - i get in Ftm.
Kiwilikecookies said:
I am not able to download the tools.zip file. So what can i do then?
Click to expand...
Click to collapse
Good luck! (and remember to make a backup first.)
Thanks
CXZa said:
Good luck! (and remember to make a backup first.)
Click to expand...
Click to collapse
I cannot speak russian so I use a translator but i don't understand it clearly. Did someone the guide and explain me how to do it.
If I have understood correctly, OP has a problem with Fastboot Mode (Bootloader Mode) and not with Recovery Mode. Wonder why OP should install a CR ( TWRP ) to solve his problem?
@Kiwilikecookies
A CR replaces device's Stock Recovery, what can't be undone. Do you really want this?
jwoegerbauer said:
If I have understood correctly, OP has a problem with Fastboot Mode (Bootloader Mode) and not with Recovery Mode. Wonder why OP should install a CR ( TWRP ) to solve his problem?
@Kiwilikecookies
A CR replaces device's Stock Recovery, what can't be undone. Do you really want this?
Click to expand...
Click to collapse
I want to unlock the bootloader to install Cr or Twrp with EDL and when i can backup it i do(wich is not importent for me), root my device and install a custom rom because there are no more official updates.
How Fastboot is implemented on a mobile device if at all ( Note: The fastboot mode is available on a lot of devices but not on all the devices out there ) varies from OEM to OEM. It's on you to find out this.
I know that from my old broken phone where i had a bootloop and had to reinstall android but i want to unlock the bootloader and my phone hasn't fastboot. So i have only recovery, ftm and EDL wich i can boot into it. I only want to unlock the bootloader i know then how to flash twrp (with edl).
Hello, i bricked my V9 . Cant communicate via ADB anymore. It shows me DFU5 COM5 under Windows and when i use ZTE Terminal i can change it it to QDLoader 9008 COM6 but still no communication via ADB possible. The only thing that works is Recovery Mode but can't install update.zip (OEM unlock not enabled, Bootloader is unlocked) and Sideload also not working (adb: sideload connection failed: no devices/emulators found). And it's not a USB, Drivers or ADB problem. Another phone works. Qfil can't communicate with COM6 and in COM5 Mode it says "Switch to EDL Fail". What i can do now?
XTA4235 said:
Hello, i bricked my V9 . Cant communicate via ADB anymore. It shows me DFU5 COM5 under Windows and when i use ZTE Terminal i can change it it to QDLoader 9008 COM6 but still no communication via ADB possible. The only thing that works is Recovery Mode but can't install update.zip (OEM unlock not enabled, Bootloader is unlocked) and Sideload also not working (adb: sideload connection failed: no devices/emulators found). And it's not a USB, Drivers or ADB problem. Another phone works. Qfil can't communicate with COM6 and in COM5 Mode it says "Switch to EDL Fail". What i can do now?
Click to expand...
Click to collapse
check params.cmd

unable to connect mobile with pc in bootloader

Hi guys I am having an interested issue,
I want to install custom rom in my phone
I have downloaded in depth test and applied for un depth test
my mobile do connect to computer when it prompt to select mod I do select file transfer and my mobile do connect to laptop
and it shows in "adb devices" but when it goes into bootloader mod my mobile gets disconnected I have done everything I could
I have install every possible driver i got from articles but non worked is it the issue with my windows 10 ? or driver issue I have spent my whole night on this but couldn't find the way
fastboot devices
0purple said:
fastboot devices
Click to expand...
Click to collapse
what does it mean ?
when i connect my phone it prompt me with this and usb debugging is on
i tried adb devices but it didn't showed anything but when i chose transfer file it do connect to the laptop and shows in adb devices
najam489 said:
what does it mean ?
Click to expand...
Click to collapse
Try it once you are in fastboot
wow its showing
najam489 said:
wow its showing
Click to expand...
Click to collapse
0purple said:
Try it once you are in fastboot
Click to expand...
Click to collapse
i have another problem now my device is showing with fastboot devices but my devices status is locked when i tried this command "fastboot flash recovery recovery.img" it didnt work i am follwing this article https://www.guidetoroot.com/root-realme-3-pro/
thank you for your help my bootloader wasn't unlock it is now thanks a lot
It appears your device's bootloader is locked. Try:
fastboot oem unlock
fastboot flashing unlock
If that doesn't help, search for a guide on how to unlock bootloader for your specific brand.
It also looks like don't really know what you are doing. Make sure you are following trusted guide. If no, I'll be happy to help.
0purple said:
It appears your device's bootloader is locked. Try:
fastboot oem unlock
fastboot flashing unlock
If that doesn't help, search for a guide on how to unlock bootloader for your specific brand.
It also looks like don't really know what you are doing. Make sure you are following trusted guide. If no, I'll be happy to help.
Click to expand...
Click to collapse
well i did installed custom roms few time but i dont know much, i did unlock bootloader now the problem is i do install custom recovery twrp and it do installed and rom manager shows that custom recovery is installed but pressing volume down + power button just shows fastboot logo and it restart my phone, and with command "
adb reboot bootloader" i am able to boot into fastboot mood and when i go to recovery from their it open stock recovery instead of twrp
Stolen from my guide:
7. Go into fastboot mode
8. fastboot flash recovery recovery.img
9. fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
10. fastboot reboot recovery
12. Sometimes recovery doesn't want to stick as a permanent one. To test it, hold the power button and select "Reboot to recovery". If you reboot to TWRP, you can move on, but if you reboot to stock one, flash recovery using fastboot again and from recovery flash recovery again (sounds crazy, right?). I won't give you instructions on this, research it yourself. Make sure guide you will find is for your device and your recovery.

Categories

Resources