Thinnest Qi Charger - Samsung Galaxy S7 Accessories

I'm looking for the thinnest Qi charger available. It doesn't have to be fast charging, just super thin. I have the Ravpower Mini charging pad, but it is slightly too thick for what I want to do with it. I want to glue it down to my RAM mount so that I can charge wirelessly in the car while in use. Thanks!

My old nokia qi chargers are slim enough and do charge my s7 pretty quick
Sent from my SC-02H using Tapatalk

I took apart that Nokia 3 coil and mounted its guts in the center console lid of my Silverado. Works like a champ through the phone case and the plastic tray of the console.
Sent from my SM-G930U using Tapatalk

if u know how to Solder and have good hands u can do really cool things with something like this :
http://www.ebay.com/itm/Qi-Wireless-Charger-PCBA-Circuit-Board-With-3-Coil-Wireless-Charging-Pad-DIY-h-/111787743471?hash=item1a071198ef:g:qPwAAOSw0HVWDzzK
that's the thinnest Qi charger available

Related

Idea for Qi Charging Case

The magnetic charging docks are not bad. Also, the qi charging case from Sony is pretty nice. However, the best case would be a plastic case with a Qi wireless coil inside with a lead that wraps around and fits over the magnetic contact. Qi chargers like the Tylt work really well and they are so handy at home and in the car. I wear a holster so the flip cover is not necessary.
Sent from my D6503 using XDA Free mobile app
rambo6 said:
The magnetic charging docks are not bad. Also, the qi charging case from Sony is pretty nice. However, the best case would be a plastic case with a Qi wireless coil inside with a lead that wraps around and fits over the magnetic contact. Qi chargers like the Tylt work really well and they are so handy at home and in the car. I wear a holster so the flip cover is not necessary.
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
Can you please tell me where you managed to get the Qi charging case? I cannot find it anywhere...
matthieup said:
Can you please tell me where you managed to get the Qi charging case? I cannot find it anywhere...
Click to expand...
Click to collapse
Sony Cancelled the accessory.
They also removed any trace of it on their official websites.
HussainQ said:
Sony Cancelled the accessory.
They also removed any trace of it on their official websites.
Click to expand...
Click to collapse
I know, that's why I asked if maybe there are some prototype floating around
I did not mean to infer that I had one of the Sony Qi charging cases. I may have purchased one had they been available. I prefer the a slim fitting tpu or hybrid case. However, none that I have found fit correctly. Sony's magnetic charging docks are great and work fast, but one has to remove his case to use them. Yet no one makes a good case that covers up the SIM/Micro USB cover and exposes the magnetic charging area. This is totally stupid. One only seldomly changes his SIM and needs access to the micro usb port, but one always needs to charge.
If Sony is not going to add a Qi charger in the phone, they should at least make some good folio and slim fit cases at a sub $50 price that can be left on while charging using the magnetic dock.
Also, charging with a car dock is a pain without Qi charging using the Z2. The buttons are all in the wrong place also and interfere with the sides of both my car docks.
It's a real shame that Sony has not made a better attempt at charging options combined with cases. The Sony Z2 is a great phone. Even better yet woukd be a removeable battery. This is the only feature that keeps me going back to Samsung.
Sent from my D6503 using XDA Free mobile app
I have been thinking about trying this. I have dismantled a magnetic charger and there are only 2 wires in there. Positive and negative. Is there anything stopping me buying a universal micro usb qi adapter and soldering the positive and negative from that onto the positive and negative of the magnetic charger and hiding it all inside a case?
That's an interesting Idea. I've thought of the same thing, though I wanted to connect to the magnetic charger contact rather than the micro USB port. I'd like to make a case with a Qi charger and FM radio antenna built in. It wouldn't take up that much space.
I hope someone at Sony is watching this thread.
Sent from my D6503 using XDA Free mobile app
I for one actually feel a bit cheated.
The did announce Qi charging capability through a case and plate and while I had to choose between the S5/M8/Z2, this was one of the element that I considered...
Now all of a sudden they decide to cancel...
Though I would much prefer a Qi charger, the magnetic chargers can be useful. I bought some cheap magnetic charging cables and cut some of the plastic off them so they would work with my phone's case on. The magnets are weak and it s a pain to get them attached but of charges quite fast.
I was hoping that the Z3 would come out of the gate with wireless charging. In a statement made a few months back, they stated they would have Qi charging by the end of this year.
Hopefully the Z4 will have it. They also need to put 32 GB of internal storage in their phones.
Sent from my D6503 using XDA Free mobile app
If someone made a QI charging case, I'd be willing to pay for it, as long as it looked good enough!
might be worth testing out to see if the WCR14 connector and charging type works on a Z2. i can see the connector alone makes the phone look much bigger.
Why sony decided to put a magnetic charge on the side is beyond me.
Did anybody get any where with this? I am thinking about getting one of the coils on ebay for the samsungs and modifying it, they look very slimline as I suppose they are design to fit behind the battery cover?
I am planning to have it sit inside a TPU case I have. The difficult part will be the magnetic part / Soldering....etc

[Q] Recommended wireless chargers

Hi guys! I've been eyeing a wireless charger for a while now. I have the D855 which includes Qi wireless charging capabilities
.
Last time I purchases a generic charger for the Note 2 it got really hot for my liking.
I've had an eye for this one... Aukey N12:
http://www.aukey.com/product/wireless-charger-n12
Unfortunately I can only find this one on eBay Australia:
http://pages.ebay.com/link/?nav=item.view&id=171730898638&alt=web
But it's $80+ down to $6.99 which is concerning.
So are there better alternatives (I assume there are heaps)?
Thanks!! [emoji4]
Will wireless chargers charge through some/all cases or covers?
It would be a pain to have to keep removing a cover (for example gel or plastic one) to be able to charge, espeically for those that are a really tight fit.
The Nokia wireless charges work flawlessly
The Nokia one is great but hard to find cheap.
Try the WCD-100 which is from LG and you can get it from Ebay for under $40-50. It works perfectly with the LG G3 (with a case). You just need to make sure you have a 1.5Amp USB charger as the WCD-100 doesn't come with a wall plug, just the USB cable.
I have several wireless chargers, the ones I like best are the Itian desktop charger and the Ikea Desk lamp charger. I have the Itian at work and the Ikea on my nightstand next to my bed. I need to put some clear rubber "feet" on the Ikea charger for easier alignment, and maybe find a way to add the charger for my G Watch R, but both work well. I should also add a disclaimer that I have only used the Ikea charger with the LG quick circle case, bit the Itian worked with the thinner cases, not so much with the leather book case (plastic and leather between the phone and charger)
@Aid777
It really depends on how thick it is. I reckon <4-5mm will be able to. I hope to get one soon and I'll let you know when I do.

Ravpower Qi Car Charger Review

Hey guys!
Thought I would post a review for this Qi wireless car charger since I didn't see much info about it and help those in deciding one for their car.
I have been using this Qi wireless car charger for about 4 months. The weather here is summer now so the car interior does get super hot, and so far this charger has been working like a champ in the heat.
The charger comes with a bunch of accessories which include:
-Vent adapter holder
-Traditional suction cup stand holder for dashboards
-Micro Usb cable
-Usb car chager (1 input)
-Sticky pads for wire management
I used the suction cup on my dash since my vents in my car are not ideal for my setup. The Qi charger is made hard sturdy black plastic and the section where you place your phone is made of a softer grippy rubber that holds the Nexus 6 very well. There is button on the back that release the two arm clamps. The Nexus 6 being a big of a device I thought it would be a tight fit, but I am happy to report that there is plenty of space. I have a Caseology Case and still a bit of extra room on the dock. So for those with thicker cases than mine can still fit, but in terms of it charging through a thicker case is something I do not have to test, but for those familiar with my case which I will put a link on the bottom of this post, my phone charges perfectly fine with it. Also the Qi charging unit in this has a 3 coil system so placement is not an issue and wireless charging is maximized and efficient as possible. There is a LED light on the bottom that indicates if it idle or charging, Green means idle and Blue means charging. The cradle of the charger is very sturdy and holds the Nexus with ease, have not had it drop my phone (yet) and hopefully stays that way. I use the charger everyday for the past 4 months and yet to encounter an issue, remember I am using it 95 degree weather for the past 4 months and it has not died on me yet. Once winter comes I will update on how it handles the cold, hopefully like a champ as it does in the summer! I attached some pictures for everyone to have a better look at it. Overall I am very happy with this charger and highly recommended!
Any questions about this product let me know and I will try my best to answer and help!
Amazon Links:
Qi wireless charger:
http://www.amazon.com/RAVPower-Wire...id=1440909770&sr=8-1&keywords=ravpower+qi+car
Case:
http://www.amazon.com/Caseology®-Me...=1440911291&sr=8-1&keywords=nexus+6+caseology
Thanks!
Look.like so good.
Can you try in front window and let us know how it works? When I get my phone it's going to be a window mount and since I'll have to use an OTG adapter for long distance that means I'll have to use wireless charging.
thunderstruck! said:
Can you try in front window and let us know how it works? When I get my phone it's going to be a window mount and since I'll have to use an OTG adapter for long distance that means I'll have to use wireless charging.
Click to expand...
Click to collapse
If you mean having the suction cup on the windows then yes it works even better cause the surface on the glass gives it an even better grip.

Wireless charging with Speck Presidio Grip Case - will it work?

Do someone know, will wireless charging work with Speck Presidio Grip? I want to buy car mount with Qi wireless charger (https://www.cafago.com/en/p-pa4049.html) and I need to know will it even work.
Why wouldn't it?
Because it's additional material between phone and wireless charger? I don't know, how it works.
Sent from my SM-G903F using Tapatalk
It's plastic. It'll be fine. You can charge with a case on.
Thanks for help, thread can be closed, if there's any moderator
I wouldn't be so quick to call it good. While my S8 charges fine with a Speck case on a Samsung charger, a friend has a GMC Yukon with a charging pad built in the center console. Neither my S8 with Speck case nor his S8 with whatever case he has will charge there. Remove the case and it charges fine.
Iv just bought the speck grip case and it works pretty fine with my anker wireless charger

Wireless Charging for 3a XL

I wanted to have wireless charging on my 3a XL to prevent wear and tear on the charging port. I charge once a day using USB cable and I realize if I will do this everyday there is a risk of damaging the charging port. Although it did not happen on my previous Android phones, i still wanted to be cautious as i like the 3a XL so much and planning to do upgrade after 3yrs or so.
I was able to get a Nilkin Qi Wireless charging receiver and Anker Qi charging pad. The receiver fits OK on my Poetic rugged armor case. I can now do wireless charging without hassle!
Cool that you got this working.
I will say that according to the breakdown guides that I saw on the 3a series, the USB port is actually modular. So if it did break for some reason (I agree with you that it is a pretty rare, but not unfathomable, thing to happen) it should be super simple to replace. No soldering needed. Just pull the old module out and replace with a new module. https://www.ifixit.com/Teardown/Google+Pixel+3a+Teardown/123256
I wonder if those steel plates they sell, so that the phone will stick to magnetic mounts, would work if placed between the Qi charging adapter and the phone...?
Tom2112 said:
I wonder if those steel plates they sell, so that the phone will stick to magnetic mounts, would work if placed between the Qi charging adapter and the phone...?
Click to expand...
Click to collapse
It won't and you could risk a fire from the heat that gets pumped into the metal

Categories

Resources