ZTE Nubia Z11 Max NX523J Stuck in BootLoop after V1.43 Update Failure - Android Q&A, Help & Troubleshooting

Hi Folks,
The Phone is stuck at Nubia Logo, and just stays there. TWRP was successfully installed and phone was rooted. Before actually loading the update package, i performed a wipe (delvik, system, data) and flashed a Stock Recovery. It prompted for Reboot which i did and the bad luck started.
Now, Vol-Up+Power boots into stock Recovery but unfortunately i do not have a backup nor an official Nubia ROM for the handset & hence can't do anything. Vol-Down+Power boots into Bootloader in which all the options pretty much take me back to Stock Recovery.
I know i made a stupid mistake but it would be really really helpful if anyone could please help put an end to my misery and undo this error. I have already tried discharging completely and then trying to power it back on again but to no avail.
Thanks in advance

Guys, a little help here please!!

My laptop does not recognize the device, it doesn't even appear when connected via USB Cable, although it charges alright.
I tried installing Nubia Recovery Tool but unfortunately it was in Chinese and I could not understand one word of it.
Please HELP!!

Hi Goraya,
I get a lot of answers from Pesa1234, hi is from Italy so his English is not that good.
I use the ComboRom 4.2 and in principle it is good, although I don't have fast charging.

Related

Bricked s3 :/

Earlier today, I downgraded the firmware from my straighttalk galaxy s3 from stock H2 to H1 and then proceeded to root it, which went fine. After this, I installed CWM recovery and cyanogenmod, once I booted into cyanogenmod, I ran into a bug/glitch which didn't allow my rom to use my mobile data, so after that, I installed android revolution hd. This is where I ran into my problem, I went into CWM and factory reset my phone and wiped all caches, after this I proceeded to install android revolution HD, only to find out that it only shows a black screen, I also cannot use adb, but my computer still recognizes my phone as connected.
PS:
If I leave the battery out and plug in the USB, I get a brief solid red light
The phone WILL NOT go into recovery or download
No boot screen or error
Any and all help you guys can offer is well appreciated as I was not expecting this to happen
Hello imjimbob,
I think your LCD is broken. :crying:
Can you tell me a bit more please, and is there any way to fix it?
How would my phone screen break from flashing a ROM?

Dead XPeria X10 Mini after flashing bad rom from flashing tool. Hard bricked? :(

Hello everyone!
Need some help, I'm totally new to android hacking stuff and think messed up my phone, it's sure an old one but I loved it so much I don't want it to die.
So here's the point, yesterday I rooted it, worked fine, after that I unlocked the bootloader, always fine, but the problems began when I tried installing a custom recovery, didn't find a suitable one for the phone so I found RecoverX, and installed the CWM-Based Recovery 5.0.2.7 (ICS), after it done installing the phone was never able to boot anymore, I got stuck on a bootloop so I was searching for the original firmware, I found one and it worked after that, except the touchscreen was not working, so after reading some threads I realised that I installed a firmware who's not made for my phone version. Then I tried flashtool again and installed the built-in version or don't know what it is just for seing if it was able to restore the firmware since it said "X10". After that the phone turned off and wasn't able to boot anymore, the power button doesn't respond, no vibration, no backlight, no LED, and it isn't detected but the computer anymore, I tried flash mode and all other thing but nothing.
Is it dead? Can't I repair it anymore? Based on some reasearch I think it's hard bricked but can't find a solution.
Please help. Can I repair it by myself by doing some testpoint stuff or I don't know, I'm just too new about this, I just began yesterday.
PS: sorry for my bad english.
Thanks for you answer.

I need stock ROM for Alcatel Pop 3 (5025D)

Hello everyone,
So I got a phone from a friend, he said the phone just stopped working. The power button just vibrates the phone and nothing happens, I cant get into the recovery, and when I connect it on a charger it just displays it's alcatel logo and does not move any further.
I assume that the memory got wiped, but maybe I'm wrong. Anyways, it's running on MTK6580 and I tried to flash a new recovery with system and everthing else. It didn't work out. And now I need your help... I can't find a stock ROM for this phone, and I need you guys to send me one if you can. The thing is, I need to install it through the SP Flash tool, so I will need all the information in the scatter file. Like I need the recovery, system, boot and all of that stuff....
If I posted in the wrong section, I'm sorry and if something is not clear, ask me.
Thanks in advance guys!

anyone please help me. i just bricked my phone

the phone's model is nubia Z5s mini nx404h. the thing is this model is only sold to Philippines and Russia and its pretty outdated its jelly bean 4.3 but the thing is i rooted it. flashed the suitable TWRP for my device. and i accidentally wiped cache/dalvik then it restarted to recovery thrice even if i choose to reboot to system. the information about this device is so scarce that i had to spend 29 hours just trying to find a way to unlock the bootloader. i succeeded but now this. after certain reboots to recovery i shut it down. and tried to restart it, next thing that's happened its stuck with ZTE logo. buttons dont work. the battery cannot be removed, and its past the 2 weeks handset warranty so im doomed. now every time i try to charge it and connect it into a computer logo will show, again. and it computer says usb not recognized, then thats it. buttons not working nothing is working. please help. im trying everything, almost everything. thanks to anyone who will be kind enough to help me.

help me guys

goodmorning everybody . i am sorry about my bed english also i am sorry because i am writing this post while going to university so will check it later since my phone is broken
first of all my phone is lenovo k6 power i've rooted the phone and it works fine but sadly some apps detect root so i decided to remove it by installing other costum rom called lineages i guess like that
i was sure that the rom will work so i didn t do a buck up and i i did the wipe data system and i delet everything . when i tried to install the rom it didn t work it gives me error 225 which i search through the net and i discover that i need to change something in the rom i tried but it gives me same error
in that moment the phone stucked in boot it won t shut down either go trwp or fastboot i tried to install the official rom by Qfil but i can not since the phone did not shut down i've said i will let it to the point where the phone goes down of charge and try
i let it and now in the morning i tried but the programm didn t detect the phone also when i plug the phone to the charger it doesn t work please help guys i beg you all help and i promise i will not touch it again :crying::crying::crying::crying:
Shouldnt have been that bad
If the lineage os zip gave an error it means that it didnt install. TWRP should still be there and you should be able to bolt up back into recovery. Try doing the right button combination to power up and enter into recovery. I doubt that after installing a zip and rebooting your phone broke.
brother i installed trwp i am using the one that i did on rooting and installing superuser
any idea how can i shut down the phone to install the official rom

Categories

Resources