This is based on my Nougat kernel source for the J700P. Bugs like MTP and ADB being unstable/broken have been fixed.
Instructions to install TWRP:
1. Reboot your device into download mode.
2. Attach to PC via USB.
3. Select AP tab, and find the twrp-3.2.0-0-j7ltespr.img.tar file.
4. Start the flashing process.
5. After the reboot, hold the volUp+home+power keys to boot into TWRP.
Changelog for 3.2.0-0:
Allow restoring adb backups in the TWRP GUI (bigbiff)
Fix gzip backup error in adb backups (bigbiff)
Fix a bug in TWRP's backup routines that occasionally corrupted backup files (nkk71)
Better support for installing Android 8.0 based zips due to legacy props (nkk71)
Support vold decrypt with keymaster 3.0 in 8.0 firmwares (nkk71)
Decrypt of synthetic passwords for Pixel 2 (Dees_Troy)
Support newer ext4 FBE policies for backup and restore in libtar (Dees_Troy)
v2 fstab support (Dees_Troy)
Bring TWRP forward to android 8.0 AOSP base (Dees_Troy)
Various other minor bugfixes and tweaks
Downloads:
TWRP: https://twrp.me/devices/samsunggalaxyj72015qcomsprint.html
For which J7 variant? J7 2015,2016??
Sent from my SM-J700M using Tapatalk
daishi4u said:
for which j7 variant? J7 2015,2016??
Click to expand...
Click to collapse
j700p 2015
OK thanks
Sent from my SM-J700M using Tapatalk
minz1 said:
j700p 2015
Click to expand...
Click to collapse
Plz note that in 1st post for any mistake could happen
minz1 said:
j700p 2015
Click to expand...
Click to collapse
What about J700F 2015??
smarty_jogi said:
What about J700F 2015??
Click to expand...
Click to collapse
Can you read?
minz1 said:
Can you read?
Click to expand...
Click to collapse
Yes... If i misunderstood something... Please address...
Thank you
smarty_jogi said:
Yes... If i misunderstood something... Please address...
Thank you
Click to expand...
Click to collapse
This is for J700P, as I have started before.
minz1 said:
Can you read?
Click to expand...
Click to collapse
Why do you have to be so rude? That member was just asking.
kdraw44 said:
Why do you have to be so rude? That member was just asking.
Click to expand...
Click to collapse
It may have been a bit extreme, but it was said just earlier...
New build of TWRP out with reboot to recovery and download mode now enabled.
So what do I use for boost J7 2016 version?????
Sent from my LGLS770 using Tapatalk
tnomtlaw said:
So what do I use for boost J7 2016 version?????
Sent from my LGLS770 using Tapatalk
Click to expand...
Click to collapse
Can someone answer.Twrp 3.0.2.0 has problems when booting to recovery from phone.
Sent from my SM-J700P using Tapatalk
tnomtlaw said:
Can someone answer.Twrp 3.0.2.0 has problems when booting to recovery from phone.
Sent from my SM-J700P using Tapatalk
Click to expand...
Click to collapse
This is for the Galaxy J7 for Boost. SM-J700P.
minz1 said:
This is for the Galaxy J7 for Boost. SM-J700P.
Click to expand...
Click to collapse
Hey thanks for this recovery has been very helpful
TWRP has been updated to 3.1.1-0! Next will be LineageOS 14.1.
TWRP has been updated again, now with pstore support!
minz1 said:
TWRP has been updated again, now with pstore support!
Click to expand...
Click to collapse
Pstore? Imma google it.
Edit: Nope Lost now.
Download link is down..andriod file host says it can't find the file
Related
TWRP 2.8.6.0 For SLTESKT/KTT/LGT
(Exynos Modem 303)
ChangeLogs:
- initial release
- version up
Bugs:
- x
Installation:
Copy img file into sdcard root
Run terminal emulator
$ su
# dd if=/sdcard/TWRP-*.img of=/dev/block/mmcblk0p10
Download:
ARM
Enter recovery using Power+VolUP+Home is work.
Thanks to @modpunk
XDA:DevDB Information
TWRP for slteskt/sltektt/sltelgt, ROM for the Samsung Galaxy Alpha
Contributors
qkdxorjs1002, modpunk
Source Code:
https://github.com/qkdxorjs1002/android_device_samsung_slteskt
https://github.com/qkdxorjs1002/android_kernel_samsung_slteskt
https://github.com/qkdxorjs1002/proprietary_vendor_samsung_slteskt
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-12-31
Last Updated 2015-04-21
850m
Work in 850m?
klau77 said:
Work in 850m?
Click to expand...
Click to collapse
Yeah, this recovery is for exynos based alpha.
850m
where to download?
klau77 said:
where to download?
Click to expand...
Click to collapse
Open your eyes
Thank you
Sent from my SM-G850S using XDA Free mobile app
kmsi said:
Thank you
Sent from my SM-G850S using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for this. Any plans to release TWRP for Snapdragon Alpha as well?
Is it suitable for SM-G850F?
Could you provide us with an Odin flash-able tar ? Would be much appreciated
GreySephiroth said:
Could you provide us with an Odin flash-able tar ? Would be much appreciated
Click to expand...
Click to collapse
Just rename file to recovery.img and compress file to tar file.
qkdxorjs1002 said:
Just rename file to recovery.img and compress file to tar file.
Click to expand...
Click to collapse
Oh, sry, didn't know it was that simple
Btw, if I would provide you with a boot.img or recovery.img dump from the new 5.0.2 850F firmware, could you compile a recovery for the new firmware ?
Please complete for new firmware 5.0.2 lollipop.....kitkat is dead
SM-G850w compatible?
Will this work on my Canadian (sm-g850w) Alpha? Thanks
Backup not working on 5.0.2 stok roms
pls make a update,I like to try some theme & twicks but without working back up
will be too much time losing
I'm curious and interested in the kernel in your files section.
Any changelog/features list ?
Thank you
hensk said:
Backup not working on 5.0.2 stok roms
pls make a update,I like to try some theme & twicks but without working back up
will be too much time losing
Click to expand...
Click to collapse
sorry,this recovery works perfect with Alpha 850F,i have old recovery 2.8.1.1
but after flashing 2860 recovery all OK
hensk said:
sorry,this recovery works perfect with Alpha 850F,i have old recovery 2.8.1.1
but after flashing 2860 recovery all OK
Click to expand...
Click to collapse
So the 2860 recovery works with 5.0.2?
yup fabulous, I already make my backup on 5.0.2 rom
alpha 850F
ayamgoreng said:
I'm curious and interested in the kernel in your files section.
Any changelog/features list ?
Thank you
Click to expand...
Click to collapse
That Kernel is not compatible with G850F.
Only for Exynos Modem Built-in Devices
Here flashable zip for twrp 2.8.6.0 i created from OP, thanks to him.
MEDIAFIRE
Disclaimer: I'm not responsible for any device. Flash on your own risk! Warranty is void if flashed.
I wanted to make my own rom. It's based on stock last nougat frim for S6 920F i hope you like it
-Based on XXU5EQAC NOUGAT firmware with the FEBRUARY security patch.
-Debloated i remove a lot of apks form frim
-Odexed, Zipaligned, Busybox, Deknoxed and SQlite.
-Added Tweaks for battery , performance and it's very smooth
-Performance mod.
-S8 font for lock screen and weather.
Download here :
Mega link :https://mega.nz/#F!oZoS0BwZ!xPX2XaeQSbDvaFx0rowg4w
How to install:
1) Enter TWRP recovery.
2) Wipe Dalvik Cache, Cache and System.
3) Choose the rom zip
4) Flash Magisk that i put in the download folder you need to boot the rom and than download magisk manager form play store to have root
5) Reboot.
6) Wait 10 or 15 min for first boot.
Thanks to:
@AlexisXDA for helping me
@cloud596 thanks mate for your help
Screenshots:
Screen shots ?
the usb debug mode is work?
Chriss1983 said:
the usb debug mode is work?
Click to expand...
Click to collapse
Yes mate.
Bilal_687 said:
Screen shots ?
Click to expand...
Click to collapse
I will put now
How can I install your ROM on G920I? I really appreciate it
Excuse me for asking I'm still new here but What's different compared to stock ?
Base on stock nougat?
Awesome, my tutorial worked ahahaha, good luck with your works mate
Thank you for your effort I'm very interested in trying this one. Tell me one thing, coming from Marshmallow, do I need to flash Nougat bootloader and modem or is it OK just to follow the given procedure? Thanks!
Human_Fly said:
Thank you for your effort I'm very interested in trying this one. Tell me one thing, coming from Marshmallow, do I need to flash Nougat bootloader and modem or is it OK just to follow the given procedure? Thanks!
Click to expand...
Click to collapse
Just flash mate it will work
Sent from my SM-G920F using XDA-Developers Legacy app
tachiquan3 said:
Base on stock nougat?
Click to expand...
Click to collapse
Yes
Sent from my SM-G920F using XDA-Developers Legacy app
Bilal_687 said:
Excuse me for asking I'm still new here but What's different compared to stock ?
Click to expand...
Click to collapse
Debloated with nice tweaks
Sent from my SM-G920F using XDA-Developers Legacy app
Mercz23 said:
Just flash mate it will work
Sent from my SM-G920F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Thanks, cheers!
bielsimao said:
How can I install your ROM on G920I? I really appreciate it
Click to expand...
Click to collapse
You can flash it mate 920F and 920I are the same
Sent from my SM-G920F using XDA-Developers Legacy app
Can you add flotify sms?
nikkali25 said:
Can you add flotify sms?
Click to expand...
Click to collapse
Install it yourself.
LUUD18 said:
Install it yourself.
Click to expand...
Click to collapse
How?
sim tool missed
Mercz23 said:
Yes
Click to expand...
Click to collapse
Dual sim support? Coz i installed and didnt boot, stuck on recovery.
New port twrp 3.0.2 for g360h by me
................................
What's new?
based on stock lollipop kernel and libs and files..
[*]mtp and usb fixed.. now u can copy and paste files via mtp on pc
[*]slow format without use rm-rf fixed u dont need wait for 20min anymore its fast
[*]adb via recovery fixed for developers
[*]must emmc lags fixed with new format without rm-rf... not tested
note....to get mtp working you need disable and Enable mtp via twrp mount options when usb cable connected to pc ...
Flash it via old twrp and restart to recovery.. enjoy
Download:
View attachment twrp-3-0-2-fixed-v2-blue.zip
Thank you so much. And hey please can you help in you know making RIL for android Oreo please? You did it once with xosp nougat. Please try I implore you kindly.
Hi dear, make us a better stable version of TW.5.1.1 and do not need any Andoid Oreo, Nougat and the like, at least fix the camera, the SD card and mobile data.
Sent from my Samsung SM-G360H using XDA Labs
arnette said:
Thank you so much. And hey please can you help in you know making RIL for android Oreo please? You did it once with xosp nougat. Please try I implore you kindly.
Click to expand...
Click to collapse
Ril oreo g360h broken at hal level.. source need edited.. just wait new build.
Make Maltsev said:
Hi dear, make us a better stable version of TW.5.1.1 and do not need any Andoid Oreo, Nougat and the like, at least fix the camera, the SD card and mobile data.
Sent from my Samsung SM-G360H using XDA Labs
Click to expand...
Click to collapse
I hope so.. but its not so easy
mv2007 said:
New port twrp 3.0.2 for g360h by me
................................
What's new?
*based on stock lollipop kernel and libs and files..
*mtp and usb fixed.. now u can copy and paste files via mtp on pc
*slow format without use rm-rf fixed u dont need wait for 20min anymore its fast
*adb via recovery fixed for developers
*must emmc lags fixed with new format without rm-rf... not tested
Flash it via old twrp and restart to recovery.. enjoy
Click to expand...
Click to collapse
To you recomend me to use new twrp 3.1.1
Or this one?
Sent from my Samsung SM-G360H using XDA Labs
Cherifiali said:
To you recomend me to use new twrp 3.1.1
Or this one?
Sent from my Samsung SM-G360H using XDA Labs
Click to expand...
Click to collapse
Both good.. but this one with fixed mtp and slow format without rm-rf
mv2007 said:
Both good.. but this one with fixed mtp and slow format without rm-rf
Click to expand...
Click to collapse
Support ffs format?
Sent from my Samsung SM-G360H using XDA Labs
Cherifiali said:
Support ffs format?
Sent from my Samsung SM-G360H using XDA Labs
Click to expand...
Click to collapse
Devs have twrp 3.1.1 support ffs format.. but we don't share it.. Because every rom need special kernel for ffs
mv2007 said:
Devs have twrp 3.1.1 support ffs format.. but we don't share it.. Because every rom need special kernel for ffs
Click to expand...
Click to collapse
Ookey thanks dude
Sent from my Samsung SM-G360H using XDA Labs
Thanks for that Mr mv2007 for your reply. God bless you and thank u a lot.
---------- Post added at 05:55 PM ---------- Previous post was at 05:54 PM ----------
Thanks a lot.
mv2007 said:
New port twrp 3.0.2 for g360h by me
................................
What's new?
*based on stock lollipop kernel and libs and files..
*mtp and usb fixed.. now u can copy and paste files via mtp on pc
*slow format without use rm-rf fixed u dont need wait for 20min anymore its fast
*adb via recovery fixed for developers
*must emmc lags fixed with new format without rm-rf... not tested
Flash it via old twrp and restart to recovery.. enjoy
Click to expand...
Click to collapse
I have another question please
I m running LOS 14.1
And using SD card as adoptative storage
Is there any workaround to flash file that are on SD card on recovery ?
Sent from my Samsung SM-G360H using XDA Labs
Thank you so much. It was much needed, God bless you.
thanks bro...please fix the TW 5.1.1..i love the rom...thank you
mv2007 said:
New port twrp 3.0.2 for g360h by me
................................
What's new?
based on stock lollipop kernel and libs and files..
[*]mtp and usb fixed.. now u can copy and paste files via mtp on pc
[*]slow format without use rm-rf fixed u dont need wait for 20min anymore its fast
[*]adb via recovery fixed for developers
[*]must emmc lags fixed with new format without rm-rf... not tested
note....to get mtp working you need disable and Enable mtp via twrp mount options when usb cable connected to pc ...
Flash it via old twrp and restart to recovery.. enjoy
Download:
View attachment 4325486
Click to expand...
Click to collapse
Thank you @mv2007 for this recovery. I have two questions regarding this recovery. Hope you'll clear these issues.
1. We used the format option of earlier recovery specially for fixing the lagginess problem, though that usually took longer time but was effective too. Will this recovery be able to do same like the previous one?
2. "must emmc lags fixed with new format without rm-rf" --does this mean that this recovery will permanently fix the native lagginess problem of rooted core prime devices? Or temporarily? Or anything else?
Update: Though this twrp takes lesser time to format but unfortunately it is unable to fix the lagginess. (tested)
To fix that native lag problem use the old twrp.
T3RM1NATOR said:
Update: Though this twrp takes lesser time to format but unfortunately it is unable to fix the lagginess. (tested)
To fix that native lag problem use the old twrp.
Click to expand...
Click to collapse
Did tried latest version ?
Cherifiali said:
Did tried latest version ?
Click to expand...
Click to collapse
I tried mv2007's latest twrp.
Do you know about the official twrp 3.1.1?
Does that also have this shortcoming?
I am thinking about trying that
T3RM1NATOR said:
I tried mv2007's latest twrp.
Do you know about the official twrp 3.1.1?
Does that also have this shortcoming?
I am thinking about trying that
Click to expand...
Click to collapse
I m using 3.1.1
I have faced no bugs but i cant tell you exactely for the lagness
T3RM1NATOR said:
Update: Though this twrp takes lesser time to format but unfortunately it is unable to fix the lagginess. (tested)
To fix that native lag problem use the old twrp.
Click to expand...
Click to collapse
Cherifiali said:
Did tried latest version ?
Click to expand...
Click to collapse
T3RM1NATOR said:
I tried mv2007's latest twrp.
Do you know about the official twrp 3.1.1?
Does that also have this shortcoming?
I am thinking about trying that
Click to expand...
Click to collapse
Cherifiali said:
I m using 3.1.1
I have faced no bugs but i cant tell you exactely for the lagness
Click to expand...
Click to collapse
afaik, there is only way to fix this lagness is using dreamstar's old twrp, i did successfully recover this old pal by wiping again and again like 20times (one take half an hour). So yeah, its not easy and need to be patient, a lot.
New TWRP out
https://eu.dl.twrp.me/h870/twrp-3.2.2-0-h870.img.html
Changelog
What's new in 3.2.2-0:
* adb backup fixes
* OTA style update zips will now install automatically without prompting for decrypt
* minor tweaks to handling date/time on Qualcomm devices
* updates to some language translations
Has any one tested yet?:highfive:
ChangeLog?? Whats new?? [emoji44][emoji44]
Enviado desde mi LG-H870 mediante Tapatalk
andriyhar said:
Has any one tested yet?:highfive:
Click to expand...
Click to collapse
yes I am using it. All fine so far.
motes said:
ChangeLog?? Whats new?? [emoji44][emoji44]
Enviado desde mi LG-H870 mediante Tapatalk
Click to expand...
Click to collapse
What's new in 3.2.2-0:
* adb backup fixes
* OTA style update zips will now install automatically without prompting for decrypt
* minor tweaks to handling date/time on Qualcomm devices
* updates to some language translations
Does it work with US997? Or H870 specific?
NCU1980 said:
Does it work with US997? Or H870 specific?
Click to expand...
Click to collapse
H870 only, but search the TWRP site for your model
TWRP official only supports the H870, but for us US997 users, you can use Melina TWRP.
@zefie will be incorporating 3.2.2 into his version.
can't mount data, I'm on stock Oreo, is this known issue?
banesi said:
can't mount data, I'm on stock Oreo, is this known issue?
Click to expand...
Click to collapse
Format data, than reboot recovery . After this flash rom
LineageOS users -> don't use new TWRP version 3.2.2
I reported an issue about "system -1" error message while installing LineageOS update in January 2018. This issue still exists in new 3.2.2, TWRP issue #1133 / URL https://github.com/TeamWin/Team-Win-Recovery-Project/issues/1133
That is really poor!
I recommend all LineageOS users to use the TWRP version "Melina TWRP v3.2.1" or newer: https://forum.xda-developers.com/lg-g6/development/recovery-twrp-3-2-1-unofficial-fixes-t3722199
!bigbabba said:
Format data, than reboot recovery . After this flash rom
Click to expand...
Click to collapse
Thanks but would like to somehow make backup of stock ROM, seems not possible atm
no chinese language, ?
it can work well on 7.0, can i use this 3.22 twrp to install 8.0?
theres already a TWRP thread for G6.
https://forum.xda-developers.com/lg-g6/development/recovery-twrp-3-1-x-t3627595/page45
cheeze.keyk said:
theres already a TWRP thread for G6.
https://forum.xda-developers.com/lg-g6/development/recovery-twrp-3-1-x-t3627595/page45
Click to expand...
Click to collapse
You mean the thread for TWRP 3.1.X?
This is 3.2.2...
basicreece said:
You mean the thread for TWRP 3.1.X?
This is 3.2.2...
Click to expand...
Click to collapse
are you the dev of the updated twrp? if not then its an update from that thread. so no need to create another thread. you can just reply on the official twrp thread.
cheeze.keyk said:
are you the dev of the updated twrp? if not then its an update from that thread. so no need to create another thread. you can just reply on the official twrp thread.
Click to expand...
Click to collapse
When I posted this hadn't been mentioned, im just letting people know there is an update. Next time ill chuck it in that thread as it clearly means a lot to you.
Thank you
Hi !
It doesn`t work for LG G6 H870 . I was trying to flash from fastboot and twrp 3.1.1.0 direct . What I doing wrong?.
TWRP 3.5.2_9 FOR GALAXY J5 (2016)
DISCLAIMER : I AM NOT RESPONSIBLE VOIDING YOUR WARRANTY OR ANY DAMAGE CAUSED TO YOUR DEVICE
FEATURES
-Standard TWRP 3.5.2 features
**-Nano and bash removed for now
-Built with Android 9.0 sources
-Backup/restore/format/mount:
-IMEI 1, IMEI 2, FRP PARTITION, EFS, APNHLOS, RPM, MODEM, HIDDEN, QSEE, QHEE, PERSDATA, USB OTG
-Android 11 compatible
-Encryption
-J510H support dropped due to lack of feedback from users
BUGS/KNOWN ISSUES
-None so far
***Backup and restore info***
Some have reported having issues backing up and restoring beginning with Android 10, where upon restoring, a bootloop/stalled boot up occurs. A root fix flashable zip was referenced as the fix to this.
The official solution to this, per TWRP managerial staff, is when backing up the system partition, use the system image instead of system. Its more reliable and efficient.
INSTALLATION
1. Download TWRP image to your device
2. Reboot to Recovery
3. Install
-a. via TWRP by selecting Install, Install Image, then select the image.-b. via OrangeFox as a normal install.4. Reboot to recovery.
5. Enjoy!
DOWNLOAD
J5XNLTE/J5XLTE
https://twrp.me/samsung/j5xnlte.html
J5XLTECMCC
https://twrp.me/samsung/j5xltecmcc.html
Credits
TWRP Team
Zakaryan2004 for his assistance
Sources
TWRP source: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
Device and Kernel trees: https://github.com/teamwin
XDA:DevDB Information
[RECOVERY] TWRP 3.5.2_9 for Galaxy J5 (2016), Tool/Utility for the Samsung Galaxy J5
Contributors
palmbeach05
Version Information
Status: Stable
Current Stable Version: 3.5.2_9
Stable Release Date: 2021-04-19
Created 2019-10-01
Last Updated 2021-04-19
When might it be available?
Awesome! I will install it when available.
shreejalm said:
When might it be available?
Click to expand...
Click to collapse
I'm guessing later on today. I submitted the markdown about 3 hrs ago. Just waiting on word from the twrp team to say its uploaded
Wooow thanks so much!
Thank you so much
nice to see twrp official.
Ota install doesn't work..
Bogdans29 said:
Ota install doesn't work..
Click to expand...
Click to collapse
If i'm not mistaken, i tried coordinating with zakaryan2004 and he said ofox had the same issue. However jens 3.2.3 did have that feature. I have been unable to replicate his success on this or the 2015 version. Best advice, download the rom normally, and update that way until i can track down a patch to implement.
palmbeach05 said:
If i'm not mistaken, i tried coordinating with zakaryan2004 and he said ofox had the same issue. However jens 3.2.3 did have that feature. I have been unable to replicate his success on this or the 2015 version. Best advice, download the rom normally, and update that way until i can track down a patch to implement.
Click to expand...
Click to collapse
You are right...Jenslody i think know solution since he make 3.2.3 that work for ota.. Not a big problem for me at all.. Just want you to know and don't know for others. Thank you for TWRP and for your help.
Bogdans29 said:
You are right...Jenslody i think know solution since he make 3.2.3 that work for ota.. Not a big problem for me at all.. Just want you to know and don't know for others. Thank you for TWRP and for your help.
Click to expand...
Click to collapse
Np. Not sure how much he talks, i'm wrapped up in pre-10 implementations and stuff (or at least trying to get the damn thing to work), but if you can get info on that, i'll push it to both the 2015 and 2016 builds and re-release with that update
Amazing to see official TWRP for our device! Thank you so much!
Sent from my j5xnlte using XDA Labs
palmbeach05 said:
Np. Not sure how much he talks, i'm wrapped up in pre-10 implementations and stuff (or at least trying to get the damn thing to work), but if you can get info on that, i'll push it to both the 2015 and 2016 builds and re-release with that update
Click to expand...
Click to collapse
I will try..
i asked for the issue on the twrp github.maybe they have a hint for fixing
J510H?
TWRP 3.3 has some flashing problems with some zips like the Camera fix for Pie just doesn't replace anything...
NecromancerViper said:
TWRP 3.3 has some flashing problems with some zips like the Camera fix for Pie just doesn't replace anything...
Click to expand...
Click to collapse
provide logs
Have you got any recovery for J510H? The version is not important but to be able to download android P&Q roms only
Bogdans29 said:
provide logs
Click to expand...
Click to collapse
+1
Zaid Koudmani said:
Have you got any recovery for J510H? The version is not important but to be able to download android P&Q roms only
Click to expand...
Click to collapse
I have some free time over the next few days to look into things. Can you tell me if there are any pie roms for the j510h? I'm not sure or can't exactly tell if that is supported?