Hello
I tried flashing my phone with lineage 15 I had not noticed that the rom had a bug in the battery software, then I tried to start my cell phone and nothing. It does not appear that it's power up, already tried the combo buttons either fastboot or csc nothing happens.
The way I saw to get my cell phone out of the coma is with the program Qualcomm Flash Image Loader, I would like to know if anybody has the files necessary (mbn and Xml). My phone is the Zenfone 2 max ZC550KL msm8916 snapdragon 410.
Best Regards
Me too
Me too end in the same problem!!
Is there any way?
Related
I have found about 10 various manuals how to do it and I tried all of them to activate this mode but unsuccessfully. I heared somewhere that it disabled in Android kernel, so may be someone knows how to enable or to get it round or something? I will explain why do I need it: I want to connect with phone by QPST to unlock Bands like described here - https://forum.xda-developers.com/cr...ad-progress-please-leave-im-updating-t2871269. I just thought that if E2312 has the same SOC on a bort as his brothers so it could be possible to unlock LTE Bands on it. But It contained in NVM of the Quallcomm processor.
If anyone has some experience or any idea how to realize it - make me know please.
I bring a problem. I try to flash my Redmi note 4 but without success. Try the flasboot Chinese / global stable and both leave me in an infinite bootloop, installing the developers versions start but I throw the following error, I made a full wipe but returns to the same error screen:
[url=http://es.zimagez.com/zimage/20170407074040.php]
[/URL]
I comment that I flash by SPFlahsTool by changing the CUST.img. XioMiFlash does not flash because I have the BL blocked.
Try to connect the DEEP FLASH cable to make it enter EDL mode but without success, it does not enter.
I only have to proceed to do a TEST POINT so that it enters EDL mode through port 9008 and can flash through XiaoMiFlash.
Look for all the internet and I can not find the TEST POINT of this model.
I leave some images of the plate to be able to between all get the TP for this model.
[url=http://es.zimagez.com/zimage/20170407074952-01.php]
[/URL]
[url=http://es.zimagez.com/zimage/20170407075104-01.php]
[/URL]
[url=http://es.zimagez.com/zimage/20170407075615-01.php]
[/URL]
I also leave an image of the model of the cell phone...
[url=http://es.zimagez.com/zimage/20170407082417-01.php]
[/URL]
Thank you very much. I hope we can find the TP to revive my Redmi Note 4 and other users who may need it later ...
Is there a Chinese stable or beta for Snapdragon version? Of course you will have bootloop. :silly:
Crowbar Asdfghjkl said:
Is there a Chinese stable or beta for Snapdragon version? Of course you will have bootloop. :silly:
Click to expand...
Click to collapse
I have the MediaTeK (MTK) version not the Snapdragon. Place the corresponding MTK global version stable and it is in bootloop but when installing the global MTK developers it manages to start with the problem of encryption (image 1). I could not start the system.
Nobody knows what the TEST POINT of this board can be? I'm willing to try different pin suggestions ...
I buy a phone from Ebay, i flashed the phone with wrong rom's in Smart Phone Flash Tool. then i flashed the phone i check the Bootloader off. so i don't flash the preloader.
I searched around and i found close to the phone and it was MT6735M without error in Smart Phone Flash Tool. But the phone still does not boot up, without success.
I asked on this forum i another topics, he help me to get preloader.bin out of my phone, now i have the preloader.bin.
What the problem i can't found the right rom right now.
The name is: (GSM UNLOCKED 4G LTE 6.29" Waterdrop Screen Smart Phone Android 9 Fingerprint ID) from Ebay
i get confused:
Before i flash the Phone it says (MT6595)
I got booted it op in mode: and it says (MT6735)
The buyer says (MT6575)
WwR MTK says: CPU type: (MT6752)
Can some one help me with the right rom? i hope you also not get confused as i am. Tell me if you need more info about the topic.
Not too long ago i installed a custom rom on my phone( Oneplus nord n10 5g ) and i guess i messed something up cus after a while it would go into Qualcomm crash dump mode. So i went to get help some people told me to use MSM, I installed it, put my phone into EDL mode, ECT, but once i went to click begin with my phone correctly in EDL mode i got the following status msg forever on MSM, "hub-image identify by target sw is disabled". so i thought i got the wrong MSM for the wrong model so i went to get the right one from the official site but there wasn't one for my "BE2026" model so im stumped. Please help.
Hello Guys
I want to link my topic of last month for my motorola X40 as I can see the moto x40 / edge 40 pro has a own XDA forum now.
Link of the topic is to be found here:
https://forum.xda-developers.com/t/i-screwed-up-moto-x40-bricked-any-edl-mode-available.4567913/
Short story: I bricked my moto X40 last month by flashing the wrong firmware (edge 30 pro) with result my phone is semi bricked. (+ relocked the bootloader).
My phone is detected now as a edge 30 pro in firmware.
It's still booting and I can even play games on it but the touchscreen is not working anymore, touch itself works but the calibration is completely wrong, it's touching a complete different point on the screen compared where I put my finger on. So touch is unusable
I can control my screen phone with a bluetooth mouse or gamepad controller. (i'm using it for now as a switch emulator or I play some games from the play store).
I haven't managed to unlock the bootloader anymore, the option is there in developer menu but when I try to enable it, the developer menu just crashes (stopped working error).
My theory behind this is you can only unlock the bootloader once.
So this topic is for anyone has encountering the same issue as me, who knows there will be any solution in the future.
I think only EDL mode can unlock the bootloader again or flash the phone back to original firmware.
But we don't know yet how to get into EDL mode for this phone yet.
Did you try using blankflash? as it works from 9008 port and probably flashes the boot image.
MASBD said:
Did you try using blankflash? as it works from 9008 port and probably flashes the boot image.
Click to expand...
Click to collapse
Yes I think I saw a post somewhere couple of weeks ago there was a blankflash file for this phone but not yet a working method to flash or use it. I could be wrong
The main problem is I can't get it to 9008 (EDL) port otherwise I could have flashed it back easily also with RSDlite or Qfil tool.
EDL mode (9008 port) is required to flash with blankflash(or any other method) if you can't unlock the primary bootloader anymore from the firmware side.
If i'm not wrong I don't think anyone has found out yet how bypass the snapdragon 8 gen2 primary bootloader to access the secondary bootloader (edl mode).
Shorting some test-points on the motherboard circuit could work, only we don't know yet which ones exactly
1 guy has tried this out I found on the russian forum:
Motorola Moto X40 / Motorola Edge 40 Pro - Обсуждение - 4PDA
Motorola Moto X40 / Motorola Edge 40 Pro - Обсуждение, Смартфон, 6,7"
4pda.to
He tried to short the circuit with test points on the motherboard and succeeded to bypass the primary bootloader and tried to get into EDL mode on (port 9008). But I think regardless of that he still wasn't able to flash it (used bad google translation from russian to english. Even he tricked the phone into EDL mode at some point he got stuck in the flashing process, my guess is there are some additional security added to this SOC to avoid this.
Edit: Maybe this is some useful info for other people reading this
Based on my previous research
Normal fastboot mode = primary bootloader (non EDL mode)
EDL mode (port 9008) = tied to secondary bootloader
The secondary bootloader is always present on a snapdragon SOC, but ofcourse due security reasons it's a bit of a secret how to access it. Guess time will tell if someone find it out how to get into EDL mode on this phone (moto X40 or edge 40pro which shares both same SOC).
the same problem here
Solved.
Solved.
forum.xda-developers.com