Related
I am new to this forum but have very high hopes that someone with more technical skills will be able to help me with my LG G watch
To start , i bought this new LG G watch and did not turn it on for 3 months after purchase , then i tried to run it on and it never came up , left it on charging overnight many times ,tried reset button and all other tricks i could find with help of Mr. Google except opening it .
So i plugged it in laptop USB port and at first it was showing some "Bulk" in device manager but it managed to get drivers automatically and now shows as HS-USB QDloader 9008 in device manager , than i again asked Mr. Google to help and read several forums and tricks and tips about getting device out of this phase using QPST etc. nothing worked so far.
I also tried LG flash tool but that also fails .
now i am here seeking help , anyone have any idea on how to get this device turned on ?
Is there someone who figured this??? Please help .. I did nothing it has happened suddenly. Now only showing this QDloader 9008.
sasadara said:
Is there someone who figured this??? Please help .. I did nothing it has happened suddenly. Now only showing this QDloader 9008.
Click to expand...
Click to collapse
I hate to say this but, you might be screwed. You should send it in or get a new watch.
Sorry.
drewmrk8 said:
I hate to say this but, you might be screwed. You should send it in or get a new watch.
Sorry.
Click to expand...
Click to collapse
But I didn't do anything. Sadly we have no option here in my country to send the watch back. i have seen that there are threads which unbrick from this state. But unfortunatly all the files are related to LG G3 and G2 and so on. So I don't have necessary files for unbrick Qualcomm. Hope if i could get any help :?
sasadara said:
But I didn't do anything. Sadly we have no option here in my country to send the watch back. i have seen that there are threads which unbrick from this state. But unfortunatly all the files are related to LG G3 and G2 and so on. So I don't have necessary files for unbrick Qualcomm. Hope if i could get any help :?
Click to expand...
Click to collapse
I don't think this would work, but hey, it's worth a shot.
droidsavvy.com/unbrick-qualcomm-mobiles/
Ya I tried before I post this, but it didn't success, im getting an error like this
Sahara Connecting …
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
v QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
No answers for that. May be the incompatible *. xml
sasadara said:
Ya I tried before I post this, but it didn't success, im getting an error like this
Sahara Connecting …
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
v QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
No answers for that. May be the incompatible *. xml
Click to expand...
Click to collapse
I was just searching around and I can't seem to find anything on the topic of an LG G Watch hard brick. Just wondering, did you buy the watch from eBay or a used one from Amazon etc...?
No I have brought from my friend. I have used this like from more than a year ago without any problem. normally i forget to charge. So it will completely out sometimes. Y]Day before yesterday also I forgot to charge. But yesterday I tried to charge, but it didn't turn on. I couldn't charge it. So I just connected to the computer then I saw this mode.
sasadara said:
No I have brought from my friend. I have used this like from more than a year ago without any problem. normally i forget to charge. So it will completely out sometimes. Y]Day before yesterday also I forgot to charge. But yesterday I tried to charge, but it didn't turn on. I couldn't charge it. So I just connected to the computer then I saw this mode.
Click to expand...
Click to collapse
It's also possible that it may just be dead for good, or it might be a defective model.
Hello Everyone,
I have a questions and hopefully some one can help me out here. My son has bricked my phone and I believe it is a soft brick... could be wrong. However, I need to find away too unbrick it.
I can get into hard reset with out issues. however with everything I do, I can't get into recovery what's so ever. The phone just hangs at the loading screen. I have talked to my son in order to find out what he did and this is exactly what he told me
He installed king root and attempted to replace-kinguser-with-supersu. However when he installed the application, it asked to reboot the phone. Well he rebooted the phone and now it is stuck at the loading screen and wont go any further than that. He also told me that he did not remove kingroot prior too the reboot. Please help! as I need my phone for work.
I am out of options on what too do. I would post the guide he used but I am limited due too the spamming regulations of the board.
Any one have an idea on how to unsoft brick this phone? I am all out of options as the only two options I have are hard boot and download mode.
Lunarman01 said:
Any one have an idea on how to unsoft brick this phone? I am all out of options as the only two options I have are hard boot and download mode.
Click to expand...
Click to collapse
According to the good people here on this thread http://forum.xda-developers.com/general/general/qa-metro-pcs-lg-k7-lgms330-t3331678 there is only a paid solution at the moment.
http://lg-firmware-rom.com/download...330-dll-for-lg-up-unbrick-lg-k330-with-lg-up/
if it is a lg k7 k330 (tmo) i followed this guide http://www.repairshopusa.com/phone/lg-k7-k330-unbrick-method/
Thank you for the information. However the lgup application does not recognize my phone. Indicates that the model is "Unknown"
Guess i am out of luck lol
Not uncommon. Sometimes you need to unplug and replug the device back in or close and reopen the program.
Thank you for the information. Does the USB debugging option need to be enabled because if it does, I don't think it is as the my computer does not recognize my device at all. Under computer, it shows as k7. However when I got into the device manager it indicated "LGE Android MTP device".
No. USB Debugging only works while booted into the system or recovery. You must be in Download Mode for the LG Up tool.
At this time, I am really frustrated as nothing is currently working at this time. Possibly because the phone just went under a hard reset. I have changed the port too 41 and ran the flash tool and that was not able too pick up my phone either. Also, I can't seem to get the lgup to work correctly as it's still not working correctly.
I have uninstalled the applications belonging too lg, rebooted and then reinstalled them and I still get the same thing. I have attached screen shots below. lgup does indicate the firmware I need, however I can't get too it lol
Message me I can fix your phone
Sent from my LG-K330 using XDA-Developers mobile app
Lunarman01 said:
At this time, I am really frustrated as nothing is currently working at this time. Possibly because the phone just went under a hard reset. I have changed the port too 41 and ran the flash tool and that was not able too pick up my phone either. Also, I can't seem to get the lgup to work correctly as it's still not working correctly.
I have uninstalled the applications belonging too lg, rebooted and then reinstalled them and I still get the same thing. I have attached screen shots below. lgup does indicate the firmware I need, however I can't get too it lol
Click to expand...
Click to collapse
If I remember right, you have to make it search for *.kdz otherwise it's looking for .tot files, which is why it's probably not seeing the firmware you need.
es0tericcha0s said:
If I remember right, you have to make it search for *.kdz otherwise it's looking for .tot files, which is why it's probably not seeing the firmware you need.
Click to expand...
Click to collapse
Yes you are correct. However the file that I have downloaded from the link below doesn't actually provide you with a kdz file. The file provided you the files that have been extracted from the kdz file, which are the (LGK330.dz) file
Ah, weird. Never worked on an LG that didn't use .tot, .kdz, or .bin files. I guess just search for *.dz and it should load according to the link the other guy put up.
peteypete206 said:
Message me I can fix your phone
Sent from my LG-K330 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you peteypete206. You have really save my phone. This issue has been resolved.
Lunarman01 said:
Thank you peteypete206. You have really save my phone. This issue has been resolved.
Click to expand...
Click to collapse
i'm having same problem in device manager , LGE android mtp device (yellow triangle with exclamation) & LGUP says device unknown.
The phone is able to go in download mode. any help will be appreciated.
I have a hard bricked k7 (k330) CHIPSET MSM8909 qdload 9008 with no partition, the solution I found here was for LG G2 & G3 because the diag program has those chipsets, please I need help with this
peteypete206 said:
Message me I can fix your phone
Click to expand...
Click to collapse
How's it going man, I need your help I have a ms330 stuck in 9008 mode with an unlocked bootloader. Everything I've tried has failed and I'm stuck. I only owned this phone for 6hrs before I screwed it up any help will be appreciated!!
Hello guys!
I'm kinda freakin' out here.
Here's the story:
I bought this amazing Redmi 3 Pro from China, and after waiting for 33 days, it arrived. I knew that it's important change the ROM that came with the device, so... I changed it. I'm from Brazil, so I needed a ROM with Portuguese-BR language and at least, stable. When I was going to change the ROM, my device just turn off and never turned on again.
OBS: The drivers are installed. It recognizes as "Qualcomm HS-USB QDLoader 9008", so I think that it's on EDL Mode.
OBS2: I tested flash on: Win7(x64) and Win10(x64). Neither worked.
OBS3: Every time, I get the error "Reached End of File.(0x80070026: Receiving Hello Packet.)
OBS4: I downloaded several ROMs, several versions of MiFlash (including the Beta version) and nothing passed from the error above.
OBS5: The device doesn't turn on, doesn't light on the LED, doesn't vibrate etc.
I believe that the problem resides on the missing two files: MPRG8936.mbn and 8936_msimage.mbn.. If anyone have those files, please, share here.
Thank's for those who can help! ^^
Brow1998 said:
Hello guys!
I'm kinda freakin' out here.
Here's the story:
I bought this amazing Redmi 3 Pro from China, and after waiting for 33 days, it arrived. I knew that it's important change the ROM that came with the device, so... I changed it. I'm from Brazil, so I needed a ROM with Portuguese-BR language and at least, stable. When I was going to change the ROM, my device just turn off and never turned on again.
OBS: The drivers are installed. It recognizes as "Qualcomm HS-USB QDLoader 9008", so I think that it's on EDL Mode.
OBS2: I tested flash on: Win7(x64) and Win10(x64). Neither worked.
OBS3: Every time, I get the error "Reached End of File.(0x80070026: Receiving Hello Packet.)
OBS4: I downloaded several ROMs, several versions of MiFlash (including the Beta version) and nothing passed from the error above.
OBS5: The device doesn't turn on, doesn't light on the LED, doesn't vibrate etc.
I believe that the problem resides on the missing two files: MPRG8936.mbn and 8936_msimage.mbn.. If anyone have those files, please, share here.
Thank's for those who can help! ^^
Click to expand...
Click to collapse
don't panic.. just try this method.. your phone will be back!!
http://en.miui.com/forum.php?mod=viewthread&tid=283484&page=9#pid5645253
Didn't worked
saikatmitra71 said:
don't panic.. just try this method.. your phone will be back!!
Click to expand...
Click to collapse
Heey, didn't worked. .-.
it will be solved with the method which explained on this thread
en.miui.com/thread-283484-5-1.html
Hey @Brow1998
Try this : HERE
Section How to Unbrick the Redmi3
Scenario B (Hardbrick)
adblocker said:
Hey @Brow1998
Try this : forum.xda-developers.com/redmi-3/development/redmi-3-pro-spacex-rom-t3406919
Section How to Unbrick the Redmi3
Scenario B (Hardbrick)
Click to expand...
Click to collapse
Well.. I believe that my phone's battery is dead.. How can I charge it externally? Cuz the charger isn't charging properly. Tried several chargers, but the light of low battery doesn't turn on in a couple days.
Brow1998 said:
Well.. I believe that my phone's battery is dead.. How can I charge it externally? Cuz the charger isn't charging properly. Tried several chargers, but the light of low battery doesn't turn on in a couple days.
Click to expand...
Click to collapse
You need to plug the battery to other redmi 3 and charge it
or charge it directly with 1A 3.9V (risk of damage)
adblocker said:
You need to plug the battery to other redmi 3 and charge it
or charge it directly with 1A 3.9V (risk of damage)
Click to expand...
Click to collapse
Well.. I live in Brazil, and I don't know anyone who have this device, so that's not an option. Any other sugestions to charge it?
Brow1998 said:
Well.. I live in Brazil, and I don't know anyone who have this device, so that's not an option. Any other sugestions to charge it?
Click to expand...
Click to collapse
you do not need to charge the phone before flashing. i had the same problem. connect your phone to computer and after some minutes (may be up to 20 minutes) in device manager you will the phone as..... qdloader.... 9008 and every thing is ready to flash according the instructions.
rekh said:
you do not need to charge the phone before flashing. i had the same problem. connect your phone to computer and after some minutes (may be up to 20 minutes) in device manager you will the phone as..... qdloader.... 9008 and every thing is ready to flash according the instructions.
Click to expand...
Click to collapse
The computer recognizes the device exactly like this "Qualcomm HS-USB QDLoader 9008 (COM20)"
When i'm going to flash, an error appears, "Reached End of File.(0x80070026: Receiving Hello Packet.)".
Using the MiFlash Beta, the error says "Coudn't communicate with port COM20"
I wanna play pokémon go :c
Brow1998 said:
The computer recognizes the device exactly like this "Qualcomm HS-USB QDLoader 9008 (COM20)"
When i'm going to flash, an error appears, "Reached End of File.(0x80070026: Receiving Hello Packet.)".
Using the MiFlash Beta, the error says "Coudn't communicate with port COM20"
I wanna play pokémon go :c
Click to expand...
Click to collapse
why dont you do what I said ! ?
try it
someone like you did it and he saved his phone!
adblocker said:
why dont you do what I said ! ?
try it
someone like you did it and he saved his phone!
Click to expand...
Click to collapse
If you're talking about the solution through the guide for Redmi 3, I just did it and nothing worked. On MiFlash 2015.10.28.0 appeared the error "0x800700aa" Something like "Current Resource current being used" and when I click on refresh and try it again, the same old error appears: "0x80070026: Receiving Hello Packet"
On MiFlash Beta, the error "Can not read from port COM4" still appears.
Just updating.
Using this method, it worked: http://en.miui.com/forum.php?mod=viewthread&tid=283484&page=5#pid5510469
I was making some mistakes, but doing it properly totaly works!
Thank you all!
Brow1998 said:
Heey, didn't worked. .-.
Click to expand...
Click to collapse
same with my problem yesterday , my redmi3 deadbrick, but i can repair it, sorry for my english , follow that tutorial link
Hello everyone, so the other day I put my sim on my v10 just for a change. This v10 is rooted with elimators kernel with twrp.3.0.2. Anyway I had no radio at all. The bars showed but no activity there. I went to about phone and found that all information about the phone identity was gone , imei, service, baseband unknown, etc. I wiped to system and started fresh with lgups and tot. Files re-rooted the phone and to no avail. It still had none of the information avalable . so it thought maybe I was missingoing the baseband so I foolishly flashed one though twrp after it flashed it was light out,, power button nothing, the phone literally went cold, colder then I've ever felt. it. It felt dead for reals.........I did have it show up in device manager with Husb....bla bla... the it went to quamcom..... bla..bla... and now the computer don't see it any longer. Unless it just got sick and tired of me shoving the USB cord in and out of the socket and deactivated the USB port.... I know there is a lot of stuff out there as far as mega bricks, if anyone out there can get me out of this ,it would be awesome... my last brick with this phone was there was no root yet and I almost got though a combination of software .etc... that took me three months to Un brick it.. this brick is even worst because of No sign of life. So I'm open to use this phone as a Guinny pig for some new stuff If anyone out there's got a solution to try...... thanks
Wutever1969 said:
Hello everyone, so the other day I put my sim on my v10 just for a change. This v10 is rooted with elimators kernel with twrp.3.0.2. Anyway I had no radio at all. The bars showed but no activity there. I went to about phone and found that all information about the phone identity was gone , imei, service, baseband unknown, etc. I wiped to system and started fresh with lgups and tot. Files re-rooted the phone and to no avail. It still had none of the information avalable . so it thought maybe I was missingoing the baseband so I foolishly flashed one though twrp after it flashed it was light out,, power button nothing, the phone literally went cold, colder then I've ever felt. it. It felt dead for reals.........I did have it show up in device manager with Husb....bla bla... the it went to quamcom..... bla..bla... and now the computer don't see it any longer. Unless it just got sick and tired of me shoving the USB cord in and out of the socket and deactivated the USB port.... I know there is a lot of stuff out there as far as mega bricks, if anyone out there can get me out of this ,it would be awesome... my last brick with this phone was there was no root yet and I almost got though a combination of software .etc... that took me three months to Un brick it.. this brick is even worst because of No sign of life. So I'm open to use this phone as a Guinny pig for some new stuff If anyone out there's got a solution to try...... thanks
Click to expand...
Click to collapse
Sorry for your brick and if you can get into that Qualcomm USB mode again you may be OK, see here
http://forum.xda-developers.com/tmo...brick-phone-h901-qualcomm-9008-t3440359/page7
The issue may be due to the anti roll back 'feature' lg gave us, if it finds firmware from a lower version you can brick or could just be a mismatch between radio and bootloader
Neither are good but you may be in luck with tungkick's method
so here is an update date, I am back to my device manger seeing the phone under Qualcomm HS-USB QDLoader 9008, i have been able to install qualcomm drivers and qualcomm's QPST config program does see the phone on COM port 5, I guess now my hold up is i need the manufactures firmware which im not sure i can get, so again im stuck i guess unless there someone out there with those files
Wutever1969 said:
so here is an update date, I am back to my device manger seeing the phone under Qualcomm HS-USB QDLoader 9008, i have been able to install qualcomm drivers and qualcomm's QPST config program does see the phone on COM port 5, I guess now my hold up is i need the manufactures firmware which im not sure i can get, so again im stuck i guess unless there someone out there with those files
Click to expand...
Click to collapse
Did the files in the link i gave you not contain what you need?
demkantor said:
Did the files in the link i gave you not contain what you need?
Click to expand...
Click to collapse
i did thank you i, i have not had a chance to look over any of it yet. the link you gave me sends me to google drive with lots of programs, which direction are you pointing me towards , forgive me if i sound alittle retarded i have been working on a lot of different phones lately. this v10 has fried my brain, as far as LG's programs like UPS and Bridge neither of them see the phone, it still in COM's HS-USB Qloader 9008, i was messing with qualcomm's manufacture software, but with out LG's manufacture rom i have not gotten far.... anyway thanks again ,,,,,i did see this sd card thing is that what i need to be trying? let know ,again thanks brian
It's been hardbricked for almost a month now. I've looked everywhere on how to unbrick this specific model on XDA but didn't find anything.
I know it's been done for models like the V10, G3, etc.. so I thought there might be some hope from bringing my phone back to life.
I goofed up accidentally installing the wrong ROM for the phone. It had TWRP and all but the phone won't turn on at all.
Does anybody have system dump files for the RS988?
CP100 said:
It's been hardbricked for almost a month now. I've looked everywhere on how to unbrick this specific model on XDA but didn't find anything.
I know it's been done for models like the V10, G3, etc.. so I thought there might be some hope from bringing my phone back to life.
I goofed up accidentally installing the wrong ROM for the phone. It had TWRP and all but the phone won't turn on at all.
Does anybody have system dump files for the RS988?
Click to expand...
Click to collapse
Hello!
When you say that the phone won't turn on at all, do you mean that the LG logo does not appear when you attempt to turn it on? In any case, your phone seems to be recognized by your computer, so download LGUP (with UPPERCUT) and see if they can communicate. You can flash the stock firmware using the .kdz files linked by @autoprime in his All-in-One G5 thread. I believe the firmware made for the RS988 Brightpoint (BPT) variant doesn't have anti-rollback protection, so you'll have the most luck flashing it. Make sure, though, if you go that route, to flash the non-carrier firmware afterwards.
NextDroid said:
Hello!
When you say that the phone won't turn on at all, do you mean that the LG logo does not appear when you attempt to turn it on? In any case, your phone seems to be recognized by your computer, so download LGUP (with UPPERCUT) and see if they can communicate. You can flash the stock firmware using the .kdz files linked by @autoprime in his All-in-One G5 thread. I believe the firmware made for the RS988 Brightpoint (BPT) variant doesn't have anti-rollback protection, so you'll have the most luck flashing it. Make sure, though, if you go that route, to flash the non-carrier firmware afterwards.
Click to expand...
Click to collapse
The Logo doesn't appear, after being plugged in to my PC, it just gets a little warm.
As for the LGUP with uppercut, I ran the program and it gives me a message of it saying "no handset connected". It is currently on COM3 in device manager named "Qualcomm HS-USB QDLoader 9008".
CP100 said:
The Logo doesn't appear, after being plugged in to my PC, it just gets a little warm.
As for the LGUP with uppercut, I ran the program and it gives me a message of it saying "no handset connected". It is currently on COM3 in device manager named "Qualcomm HS-USB QDLoader 9008".
Click to expand...
Click to collapse
Interesting. This reminds me of APX mode from the NVIDIA Tegra devices.
I think there's a Qualcomm-developed firmware flashing tool that can detect the device via the COM3 port. I cannot recall the name, but if you find it, you should give it a try.
I also have same issue flashed wrong Rom showing qualcomm 9008,complete black screen not even showing charging also,no recovery mode no download mode.is there any solution for it.
balu9999 said:
I also have same issue flashed wrong Rom showing qualcomm 9008,complete black screen not even showing charging also,no recovery mode no download mode.is there any solution for it.
Click to expand...
Click to collapse
I don't know if they exist. You need qfil and whatever firmware parts and edl recovery files. Your fire hose programmer for your chipset.
I've read some guys claim sd card method. But I've never done it on this device
Where you ever able to unbrick the phone?
I am currently experiencing the same issue, the best method that would seem to work so far is through QFIL but I can't find the firehose file.
same problem, any help?
CP100 said:
It's been hardbricked for almost a month now. I've looked everywhere on how to unbrick this specific model on XDA but didn't find anything.
I know it's been done for models like the V10, G3, etc.. so I thought there might be some hope from bringing my phone back to life.
I goofed up accidentally installing the wrong ROM for the phone. It had TWRP and all but the phone won't turn on at all.
Does anybody have system dump files for the RS988?
Click to expand...
Click to collapse
I have the exact same problem but i have the h850