hi i was doing this
and i followed everithing but in the part that i select reboot it restarts, get to the "samsung" text and then power off, then i tried to start it up with the power button but it not respond, even connecting it to my pc doesnt work. i cant go back to stock rom because i cant boot into recovery.
download and recovery mode not working, it doenst even show the samsung text or something. the screen doesnt react.
do you solved your problem ?
I got a same problem, bro. i changed rom several times. more then 10 custom i've tried, and the dead boot a10 got after trying installing pixel experience 11. my a10 A105G real dead boot. pc cannot recognising, and of course odin can not indentifying port.
Lucky for me, I tried to open the case, release battery connection. and reconnectthe battery. amazing. i try to enter download mode.... and... its work for me.
hope some ppl like us can find good solution for the dead boot A10 aftertry installing a costum rom.
Related
Yo guys well it eventually had to happen someday. Well i will try to explain what exactly happenend.
I had the Sensation 5 Rom on my device. which means i was on 4.4.2 the CWM recovery is 6.0.4.7
yesterday i decided to flash back to the Revolution HD Rom which is 4.3 if im not mistaken... i didnt change the cwm recovery.
There were no problems while flashing and the Revolution HD Rom was working fine until today when i decided to boot into recovery Mode.
(My hardware PowerButton is defect thats why i took it out of my phone so yeah there is no Power Button on my S3)
Because i cant use the 3 button combo to get into Recovery i used the App quick boot and used the App to boot into Recovery mode.
Now from there on my Problem begins. The Samsung Logo appears then the phone boots into Recovery but only for roughly 1 second.
The only thing i can see is the circle with a hat in the middle (the logo) and the cwm version on the bottom before the phone shuts down and everything starts again...its kind of a bootloop only going into recovery mode for 1 second and then starting a new.
Which mena si CANT use recovery Mode and i ALSO cant get into Download Mode somehow... ive tried holding the Volume down button and Home button and everything but i cant get the phone into download Mode so yeah phone is stuck in that Bootloop which i explained above.
Do u guys think that a Usb Jig from Amazon would actually work getting the Phone into Download Mode? or is it a lost cause and i should start looking for a new phone? ^^
i would appreciate any answers a lot !
No one who can help? :/
sharaku18 said:
Yo guys well it eventually had to happen someday. Well i will try to explain what exactly happenend.
I had the Sensation 5 Rom on my device. which means i was on 4.4.2 the CWM recovery is 6.0.4.7
yesterday i decided to flash back to the Revolution HD Rom which is 4.3 if im not mistaken... i didnt change the cwm recovery.
There were no problems while flashing and the Revolution HD Rom was working fine until today when i decided to boot into recovery Mode.
(My hardware PowerButton is defect thats why i took it out of my phone so yeah there is no Power Button on my S3)
Because i cant use the 3 button combo to get into Recovery i used the App quick boot and used the App to boot into Recovery mode.
Now from there on my Problem begins. The Samsung Logo appears then the phone boots into Recovery but only for roughly 1 second.
The only thing i can see is the circle with a hat in the middle (the logo) and the cwm version on the bottom before the phone shuts down and everything starts again...its kind of a bootloop only going into recovery mode for 1 second and then starting a new.
Which mena si CANT use recovery Mode and i ALSO cant get into Download Mode somehow... ive tried holding the Volume down button and Home button and everything but i cant get the phone into download Mode so yeah phone is stuck in that Bootloop which i explained above.
Do u guys think that a Usb Jig from Amazon would actually work getting the Phone into Download Mode? or is it a lost cause and i should start looking for a new phone? ^^
i would appreciate any answers a lot !
Click to expand...
Click to collapse
Try to use adb to boot to recovery/dowload mode if not use usb jig.
tallman43 said:
Try to use adb to boot to recovery/dowload mode if not use usb jig.
Click to expand...
Click to collapse
well if i try adb the device isnt shown as connected because well the phone restarts every 2-3 seconds.
If there is still any other way wich it could work without a usb jig that would be awesome
ive found a thread over google which said something about sp tools and scatter files....looked like it was possible to change the files of the phone while it was shut down....Does somebody on here know if this is possible?
push
Helloooo,
I have a big problem, cant get my phone running again.
The sad thing is, I just got it 4 hours ago
So heres what I have done to my Phone:
I rooted it with Kingo-Root and then installed a app where TWRP was listed, there also was CWM and stuff and I thought I have to flash my phone there with TWRP to install a new ROM and stuff and I clicked there on flash.
Then it asked me if I want to restart in, I cant remember recovery and/or download mode, I clicked yes and from there the trouble began.
When it starts the Coolpad Logo appears, then it say "Download and install the package?", to confirm volume up, to abort volume down. If I press abort, it just goes off, the restart may leads to the battery charging screen ( usb cable is always connected!!), if I press volume up, it says "Information - Do not disconnect data cable", but it says it for forever, nothing happens.
If data cable isnt connected, it shows Logo and then goes off, doesnt do anything.
I wish I would have never done that, Im too stupid for stuff like that.
Can someone help me out?
Hopefully
Hi are you able to enter in TWRP recovery in orden to try to flash him back to stock rom ?
Sadly no
I read some stuff on the internet, and tried it:
I installed andoid studio on my PC, with all that drivers, connected the Phone to my PC and looked it up in the device manager.
Before it was just recognized as "Other devices - Android" without any information, now I had the Hardware ID and put that into the setup text of Google drivers and installed them.
My PC somekind recognizes the phone. (but not like normally)
Maybe i can get the Stock Rom to phone that way somehow?
Edit: its called adb interface in device manager
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
bad support.
Paskebe said:
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
Click to expand...
Click to collapse
Bad support for this phone...
My is dead after 20 days .
Paskebe said:
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
Click to expand...
Click to collapse
That is probably because you flash incompatible firmware which does not recognize display of your device .
Search on the internet for another genuine rom and repeat flashing process .
I had alsmost same issue when I flashed Blu Studio D572i with rom of D572a as I remember , was black screan completely but buttons are working (showing light) .
Hello,i got a huawei y6 2017 MYA-L11 model, i unlocked the bootloader and installed twrp, i made a backup of my stock rom and then wiped to install some custom roms.But now my phone is not working, everytime i start the phone it goes only to twrp even when i restore.I see that the backup exist in internal storage (contains system,data and boot) and says the restore was successful but the device boots always in twrp menu.Please help.
Any help guys?It doesnt seem so difficult problem for the level of this forum.
Try resetting the phone by pressing up volume button when on warning screen to get to erecovery. Use the option to shut down phone. Then try starting the phone again after a minute or two.
BTW what rom were you trying to install?
I tried every possible combination in the warning screen the only place i can go is twrp.I tried to install aokp,lineage 14.1, slim7, xeonHD nothing worked.
Where did you get those roms, I don't think they are for the y6 2017!
Anyway try pressing and holding the volume up button when at warning screen until the phone turns off. It will come back on and go to erecovery after the warning screen.
If that doesn't help then get SPFlashtool and stock rom and flash it.
I didnt know that y6 and y6 2017 was different.When i hold volume up the warning screen keeps repeating like forever and the phone doesnt go off.
Do i need spflashtool,can i do it from twrp install?
Anyway thanks for the help,it seems this phone cant take any custom roms,i should had bought a sumsung,can you suggest me some brands/devices that can be easily rooted/twrped with much custom roms in low range price.
We all make mistakes.
You will be able to fix it with the spflashtool if you download the rom.
Just have a look on here for an alternate device, I wouldn't know off hand which would be a good buy.
Tip: Read, read and then read some more before attempting anything with your phone!
Problem, the phone cant stay off when the usb is connected to the pc or electricity,when i press power off it reboots to warning screen and twrp,if it is closed when i plug the usb it starts into twrp all the time.
When i put the scatter file and press download this error appears
ERROR:S_COM_PORT_OPEN_FAIL(1013)
[COM]Failed to open COM port.
I m on linux
Use this tut to set up for linux.
You will just have to time plugging in the usb cable., I managed it so I know it can be done!
Hey there,
I was actually searching a lot about my problem but I can't find a solution anywhere so I wanted to ask you people.
Here is the story;
I tried to install twrp using a 3rd party Google play app it downloaded and said installed the twrp and asked whether I want to reboot the phone or not. Then phone got stuck in bootloop. Looks similar to the other ones but believe me it is not.
Here is why;
- Phone keeps restarting I can't even charge the phone because of that the battery just gets drained so I can't connect it to the pc
- Can't enter recovery or the fast boot mode I tried all key combinations only volume up+power works for me and it shows 3 selections. Recovery mode,fast boot mode,normal boot mode. When I select recovery mode it shows HTC logo and just keeps bootlooping. When I select fast boot mode it just says fast boot mode initiating and gets stuck there ( waited 5 hours ) when I select normal boot it already doesn't boot.
- I can't charge the phone to flash on pc since I have to have at least %35. Whenever I connect charger it starts bootlooping and never stops. Like literally I tried 24 hours and it never stopped.
- I am using Android 4.2.
Does anyone have any idea on fixing this ? This is my work phone and I can't get it to work. This is really very frustrating.
Can anyone help me get to the recovery mode ? Is my phone bricked ? If so is there any way to recover the phone or the data inside of it ? Any help would be much appreciated.
Thanks
So... any ideas ?
Up
It is very interesting how this community has no answer to this question .
Hello community,
I haven't posted here before, so I hope I'm not doing anything wrong.
I have a problem with my Neffos X1 and after browsing the internet for hours nothing helped so far, so I hope some of you can help me out.
My phone is stuck in a bootloop since yesterday evening. I haven't done any updates or new installations recently, so it just happened out of the blue. It loads till the Neffos logo and then restarts over and over again.
Since I can't take the battery out, I tried letting it run out of energy and then restart, but as soon as I connect it to a power source the bootloop will start again.
I read a lot about getting it in recovery mode or to try and flash it, but no matter what combination of buttons I try, nothing is happening. The phone basically doesn't react to anything and just keeps restarting. The only thing I noticed is, that when pushing both volume keys the screen will just stay black (no restarting), but after letting go the bootloop will start again.
I tried flashing it via SP Flash Tools, but the phone also doesn't react to it.
Lots of troubleshooting guides also require, that I have rooted my phone in the past, unfortunatly I haven't. I also read about unlocking the bootloader, but since my phone isn't reacting to any buttons and my laptop also doesn't seem to recognize my phone (probably because it doesn't boot proberly), that doesn't seem like a solution either.
To summarize: I'm stuck in a bootloop with no recovery mode, no rooting, no unlocking bootloader, probably can only use my laptop to do anything remotely.
So, is there anything you can think of, that might help me get out of the bootloop? Or ideas of what I may did wrong when trying the other solutions?
Thanks for any help in advance.
Same problem
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Shotzo said:
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Click to expand...
Click to collapse
Try this
Download phone's Stock Firmware onto your personal computer.
Install the USB MTK Drivers - NOT ANY OTHERS (skip if you have them already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your phone via USB to the computer>> holding volume + and volume – button of your phone at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug phone and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.