Firmware for Tanix TX3 Mini+ (S905W2) - Android Stick & Console AMLogic based Computers

Official firmware for this device. There are two firmware versions, one for the cheaper variant with only 2,4 Ghz WiFi and other for the dual-band (2,4 and 5 Ghz) variant.
Single band (2,4 Ghz WiFi) - TX3mini_S905W2_20211115.img
Dual band (2,4 and 5 Ghz WiFi) - TX3MINI_plus_dual_20211113.img
I tested the dual band version on my 4/64 GB device and it works. Installed with Amlogic USB Burning Tool.
Anyway, the firmware is still very buggy and root access doesn't work properly yet. Can't use OAndBackupX to restore my apps, nor AdAway to block ads... Consider this firmware only useful if you brick your device and need to flash it.

---

thanks.
What custom roms do you recomend for a tanix tx3 mini-L?

---

I don't have that model, but I would try Slimbox ATV.
TX3 Mini
CPU: Amlogic S905W GPU: Mali-450MP
slimboxtv.ru
The site is in russian, but you can use the translator of Chrome/Chromium.

---

I'm just curious about the box, as it looks quite intriguing specs-wise. Reached any verdict yet?

---

Hardware is good, but the firmware is still buggy.

---

Currently with tx3 plus, I can't boot it from sd card or use any way like debug with adb. Can someone help me? Thank you very much

---

Anyone else experiencing issues with hdr and 4k 60hz? Sometimes i have the option and sometimes i dont

---

I there a custom ROM already for the tx3 Mini+ ?

---

there are many revisions of the TX3 Mini (unique ones are rev 1.3, 1.6)
most of them have eMMC, while I have the weird 3D-NAND version
(that's rev 1.3 btw)
which revision is this firmware for?

---

LITUATUI said:
LITUATUI said:
Does you have a custom recovery for Tx3 mini+ i really need it.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
LITUATUI said:
Phần mềm chính thức cho thiết bị này. Có hai phiên bản phần sụn, một cho biến thể rẻ hơn chỉ có WiFi 2,4 Ghz và một cho biến thể băng tần kép (2,4 và 5 Ghz).
Băng tần đơn (WiFi 2,4 Ghz) - TX3mini_S905W2_20211115.img
Băng tần kép (WiFi 2,4 và 5 Ghz) - TX3MINI_plus_dual_20211113.img
Tôi đã thử nghiệm phiên bản băng tần kép trên thiết bị 4/64 GB của mình và nó hoạt động. Được cài đặt với Amlogic USB Burning Tool.
Dù sao, phần sụn vẫn còn rất nhiều lỗi và quyền truy cập root vẫn chưa hoạt động bình thường. Không thể sử dụng OAndBackupX để khôi phục ứng dụng của tôi, cũng như AdAway để chặn quảng cáo ... Hãy xem xét chương trình cơ sở này chỉ hữu ích nếu bạn đặt thiết bị của mình và cần flash thiết bị.
Click to expand...
Click to collapse

---

SlimboxTV firmware already available for Tanix S905W2 devices here. Full root with magisk.

---

ola nao falo inglessou do brasil alguem ai no foro tem o backup original
da box tx9 normal nao e a mini

---

LITUATUI said:
SlimboxTV firmware already available for Tanix S905W2 devices here. Full root with magisk.
Click to expand...
Click to collapse
Is there a firmware for TX3 MINI+ as well? Perhaps it works with the tanix w2 file?

---

hojnikb said:
Is there a firmware for TX3 MINI+ as well? Perhaps it works with the tanix w2 file?
Click to expand...
Click to collapse
It does, I'm using it for some weeks now.

---

can we expect a11 a12 on our tx3 mini or not

---

mình cần rom cho phiên bản tx3 mini 2g chạy android 11. có dùng được bản nào ít lỗi không
Mod translation via GT: I need rom for tx3 mini 2g version running android 11. can I use any version with few errors?

---

LITUATUI said:
Nó có, tôi đang sử dụng nó trong vài tuần nay.
Click to expand...
Click to collapse
can i flash it to tx3 mini 2.4g running android 11

---

LITUATUI said:
Não tenho esse modelo, mas tentaria o Slimbox ATV.
TX3 Mini
CPU: Amlogic S905W GPU: Mali-450MP
slimboxtv.ru
O site está em russo, mas você pode usar o tradutor do Chrome/Chromium.
Click to expand...
Click to collapse
Hi my friend how are you ?
Could you or someone tell me where the short of this board is so I can restore it? It connects normally, but it doesn't recognize it on the computer at all. can you help me ? I already installed the usb burning tools, the drivers and nothing appears, just the sign of being connected but nothing appears in the program

---

niconstill said:
Hi my friend how are you ?
Could you or someone tell me where the short of this board is so I can restore it? It connects normally, but it doesn't recognize it on the computer at all. can you help me ? I already installed the usb burning tools, the drivers and nothing appears, just the sign of being connected but nothing appears in the program
Click to expand...
Click to collapse
Hi.
Are you using the correct cables? A USB A - A like this one.

---

niconstill said:
...I already installed the usb burning tools, the drivers and nothing appears, just the sign of being connected but nothing appears in the program
Click to expand...
Click to collapse
Try this, install Terminal Emulator app and execute command reboot update and quickly connect USB cable, while burning tool is running...