-
this seems to be a great idea! I copied it to my memory card and couldn't run it cause I don't have .net 3.5.
I'm not interested in installing it cause it would take to much memory for other installs(waiting for a cooked 3.5 rom).
Try making a 2.0 compatible version of technic.exe first.
But this one is a good software to look up to. I use s2u2 as my locker and I miss configurable gestures to unlock.
Organic lock is going to be great! no doubt about it!
looking forward for:
1 - 2.0 compatible technic.exe
2 - full gesture control(i'm guessing this version allows only the click of the "checkpoint" and not the gesture)
3 - locking sequence not explicit(as for only owner knows it.. if not done yet)
Thumbs up to your work!
philocritus,
I didn't quite understand the 3rd point. Could you explain?
Made Technic compatible with .NET CF 2.0. Check new archive.
I can't seem to put in a gesture on my Kaiser. It doesn't detect any strokes of mine unless I make them very quick and very hard and even then, the strokes aren't the ones that I made, they seem pretty arbitrary.
I have to use the "Blind" option....lol
met3ora said:
I can't seem to put in a gesture on my Kaiser. It doesn't detect any strokes of mine unless I make them very quick and very hard and even then, the strokes aren't the ones that I made, they seem pretty arbitrary.
Click to expand...
Click to collapse
You have to tap the moving "lava" parts when you tap the black area your hit is not registered. So you basically have to tap the lava as it passes your pre-determined point.
I mean when I'm trying to define my gesture.
Excellent!
A new idea...wow!
Tested it out, and it works as it should....though I do have a few suggestions:
1)Instead of the 'lava' theme, try a easier theme....like dragging around a block in a grid would be an easier metaphor...like those picture puzzles!
2)kinda resource-hogging...slim down maybe?
Overall, a 5/5
rev3nant said:
philocritus,
I didn't quite understand the 3rd point. Could you explain?
Made Technic compatible with .NET CF 2.0. Check new archive.
Click to expand...
Click to collapse
Thanks Rev! I'll check it out and send you the results
as for the 3rd point I'm talking about having a static image as background and only the user knows where to touch to unlock. any other guy can't unlock it that way(kinda like a organic password)
Nice work.
But here, with lock enabled, phone doesn't ring.
Bye
This didn't work with my touch when I ran organic-panic. I opened that .exe, and my screen froze. I turned off the phone and turned it back on. I finally saw the lava screen and the little pockethal logo on the bottom right but the screen was still frozen. Is this running in DirectDraw? Last time this kind of thing happened is S2U2 v.93 or something and I think it was due to DD.
Interesting new idea. Subscribing to keep an eye on the progress.
ok rev here are the results on my trinity:
organic and organic-panic both run and respond only to the cancel button. couldn't unlock it...
when the display went off it never came back on...
maybe a .net 2.0 problem? or am I getting something wrong?
my perception is that there is no response to touch screen...
See these threads:
http://forum.xda-developers.com/showthread.php?t=375294&highlight=gesture
http://forum.xda-developers.com/showthread.php?t=362231&highlight=gesture
Others who put some thought and effort into something like this. I think it would be great. I added my ideas in those threads. I still wish it could be a "Gesture 2 Action" module, that could be integrated with S2U2 at some point cuz S2U2 has pretty much all the "locking and unlocking" functions down. It is evolved enough to handle almost all the use cases with notifications, locking buttons, and what not. All we'd be adding is a different "trigger" to initiate the unlock. I'm not saying its easy, but its gotta be easier than trying to redevelop all the code to do all the other functions, when all this is really adding is the gesture part.
Again, MHO.
New version.
0.8 (latest):
- Using GAPI instead of closed PocketHAL libs (so you need gx.dll)
- Removed both locker screens
- Added another unlocker screen (Checkers)
- Works with standard screen locker (and possibly any other, that properly sets lock flag in registry). This needs to be checked with other lockers' authors (in future version).
- Number of points can now be from 5 to 10.
- Installable .cab instead of .zip
See first post for .cab
If you can combine the functionality of S2U2 (notifications, time, now playing, etc)... this would be one of the top 5 best apps for WM6 available, period.
Yes, It does work on my prophet
I ,however, don't how to use even I read the instruction
May you record a live teaching video?
it's locking me all the way..
Very interesting idea that I want to see succeed. Subscribing to monitor progress/development.
WB
New version - 0.8.0.2:
- Slightly different Checkers unlocker
- Accuracy (difficulty) increased
- Device is now automatically locked after soft-reset
It works well on my prophet! However, I dislike it locking instantly on a soft reset, although this is just my preference...
Related
hi-will the hero work without the sens ? i mean will it work with the regular android gui.
like with the tf3d on wm .
thx
Yes it does. Somehow when i press my home button i get the option of either touchflo or home. Not sure how i got it to do this though!
The home one is just the plain android screen..
I got that too, happens if you press and hold home to view running applications. Goes away if you tick the make default action box (until you press and hold home again)
Yeh i noticed that too, also underneath it says something about changing options in settings home etc..
Tis nice to have the option to do this but the fact that you can do it is clearly a bug. I've let HTC know about it (although they are probably following the forums anyway).
herman3101 said:
Tis nice to have the option to do this but the fact that you can do it is clearly a bug. I've let HTC know about it (although they are probably following the forums anyway).
Click to expand...
Click to collapse
It's not a bug lol, the Sense UI home is simply a separate application to the original home instead of a replacement. like aHome, Dxtop etc etc.
also, holding the home button shows you recently run applications, not applications still running =)
Ok i can't do it on my Hero. Why?? i don't know. MY phone is sim free and not from orange or t-mobile. Maby that's why ??
yeah, it only seems to happen on the Orange and T-Mobile ones. It's not supposed to happen at all!
The Ui is indeed just an application, but it is supposed to run instead of the original Home and you aren't supposed to have access to it any more.
rhedgehog said:
yeah, it only seems to happen on the Orange and T-Mobile ones. It's not supposed to happen at all!
The Ui is indeed just an application, but it is supposed to run instead of the original Home and you aren't supposed to have access to it any more.
Click to expand...
Click to collapse
If this is the case are the phones faulty then? Do we ring and ask for new ones. ( mine is a bit worn now had it a week)
they all seem to do it. it appears to be a bug in the firmwares.
I'm sat here with a brown sim free one, running 1.76.405.6 and i can not get it to do this, no matter what i try. each method that people have posted to get it to doit, just simply doesn't seem to do it on the unbranded ones.
I saw a preview device back in may, that had the watermarked screen, and that did do it occasionally, but the release one from work doesn't seem to do it.
Normal Android Home On Hero
Guys Its very obviously not a bug, but actually a very cool feature.
If you cant access the original home,
Here's what to do...
Go to Settings - Applications - Manage Applications.
Scroll down to 'TouchFLO' and hit 'clear defaults'
Obviously this will clear the default action of taking you to the TouchFLO or Rosie UI home.
When you have done this every time you press the home button you will have a choice. Home or TouchFLO.
HERE'S THE HANDY THING ABOUT IT...
So far a bunch of apps have either had trouble or not worked at all due to the TouchFLO UI on the hero. And for obvious reasons. So...
Hit home and choose to launch TouchFLO by default (so you don't have the option of the normal android home)
Download Bar Control by the legendary Andrew Schwimmer for free on the market. open it and scroll to home. Click on home and choose an icon from the list. I chose the home icon but go crazy and choose the little android or whatever.
Now you can only go to the TouchFLO home when you press the physical home key but in you notification bar you can tap the home (or whatever icon you chose) icon and go to the original 3 screen android home.
WHY ITS A COOL FEATURE...
When in the original 3 screen android home the sense UI is not taking up foreground processes. as far as I know anyway. Reason I think this is I am a: now able to install and fully use apps that wouldn't work whilst on the Touch FLO home. And b: my Copilot Live Sat Nav works far better with almost no glitches. Thus bringing me to the conclusion that switching homes is a banging idea/feature
Thank you for you time
dmanbwxe
now that IS cool!
even though it is a bug, cos it's not supposed to do it out of the box (although yes, you can fiddle with it) Having the two like that is a nice set up!!
Yet another cool little tweak. you gotta love Android
I registered just so I could say...
Brilliant!
rhedgehog said:
now that IS cool!
even though it is a bug, cos it's not supposed to do it out of the box (although yes, you can fiddle with it) Having the two like that is a nice set up!!
Click to expand...
Click to collapse
I just spoke with HTC yesterday and asked about this..
Apparently you need to think of Sense UI like TouchFlo on the Windows Mobile. If you don't like it (and some won't) they have allowed the user to choose whether they want the original or Touch Flo.
So looks like it is not a bug, but its actually meant to do this.
Nice going I say, pleases everyone, and also..... Nice to know that the phone is very fast and responsive without Sense UI, meaning that like Touch Flo 3D, its just a tweaking game to get it to work flawlessly and smoothly, which will come in the future.
@dmanbwxe
just to clarify then- after going through all the steps you said there, pressing home will return to touchflo home as it did before, as if nothing was changed, yes? Definitely not bringing up a menu to pick which home I want?
EDIT- double post
I did this and saw a very significant performance improvement, so set 'Home' to be my default. Now I always go to the standard Android screen. In the settings menu the default option is now grayed out and holding home doesn't give me an option. Is there anyway to get sense back? I don't want to keep it, but would like to play with it some more, but mainly just have the option, I guess.
Oh, without going back to factory defaults ;-)
Homeswitcher did the trick for me (available in the market)
[UPDATE: See http://forum.xda-developers.com/showthread.php?p=7141176 in this thread for an updated version of the program, with links to new screen shots and documentation]
[UPDATE: See http://forum.xda-developers.com/showthread.php?t=795753 for the Windows Phone 7 version of this program.]
I've written a program for reading eBooks on Windows Mobile devices. It can read txt, html and (DRM-free) ePub files.
For other formats you can use Calibre to convert them epub.
The program is called 'Freda' - short for 'free reader', since it is free software (both in the sense of 'free beer', as I am not charging for it, and in the sense of 'free speech', as I am licensing my code under the GPL).
It's released now, so please download it and let me have any feeback. (BTW that link points to the WinMo version of Freda; for the Windows Phone 7 version, please go here)
The program uses three third-party libraries, DotNetZipLib, OpenNetCF and the Majestic-12 HTMLParser library; all are licensed on terms permitting their redistribution for commercial and non-commercial purposes. More information is here
Happy reading!
Hi Folks,
It's here: version 1.1 of Freda is now released.
Main new features:
CSS Style sheets are recognised
Controls/gestures can be customised
Line spacing, indent and justification can be customised
Bookmarks and annotations are provided
Dictionary look-up is implemented (using SlovoEd)
See the freda home page for more details, and for download locations.
Any problems or questions, please let me know.
Discussion for this release can be followed from this post on.
Thanks,
Jim
Briljant,
Its the first epub reader that i found on my diamond that is able to render my epub newspaper correctly. Including links and images.
(the standaard is doing a test this week only with an epub version of its newspaper)
A few remarks to help you with the beta version (witch already is a keeper for me)
I had to install freda into main memory for it to start up.
The splash screen seems to to big, the text on it is cut off left and right, i have a vga screen.
The liberary display setting (icons or details) are not saved.
Thanks for the feedback - I'm working on those items now. [fixed in release 1.0]
Thanks,
Jim
Thanks for this program.
I'm a long time reader on PDAs and there was the need for something new.
I've just installed it now and I'll come back with some comments asap.
Looking forward to your feedback. Over at mobileread, I've been getting some feedback that CSS formatting is an important feature, so I'm particularly keen to hear the forum's view on that (because the beta 0.9 version of the program doesn't handle CSS formatting at all).
Cheers,
Jim
this is a really nice app!
I'd like to see an autoscroll in full screen mode if possible, this makes late night reading sessions a bit easier (less chance of being moaned at because of tapping buttons)
I'm not certain how easy it would be to control speed of scrolling on something like my touch HD with virtually no buttons though..
it's replaced mobipocket for me.
Autoscroll speed
Yes I had wondered about implementing autoscroll, but wasn't sure what would be a good mechanism for controlling the speed. I was thinking it would be kind of cool to control it using the acceleromter (gravity sensor) - something like 'tilt more to scoll faster' ... but I've not really throught it through. Ideas welcome.
Jim
Jim Chapman said:
Yes I had wondered about implementing autoscroll, but wasn't sure what would be a good mechanism for controlling the speed. I was thinking it would be kind of cool to control it using the acceleromter (gravity sensor) - something like 'tilt more to scoll faster' ... but I've not really throught it through. Ideas welcome.
Jim
Click to expand...
Click to collapse
one option would be to use the volume buttons to speed up and down, but it may not work in the 6.5.x builds as the MS volume control seems to takeover.
accelerometer is an option, but it could be frustrating when you move the device accidentally, unless you set up a control key such as long press talk/send, to enable the gsensor speed control only when the control key is called.
love Free apps
free apps
Yep. And also it means that it's less of an issue when the customers complain and ask for their money back .
error on my Opal (QVGA).
my 2 cents after one day.
Reader is good, fast and has a good pagination system.
It's really confortable to swipe up the thumb to change page, nice idea. Sometimes i was mad using mobipoket because when you tap, it may happen that you highlight the text instead of changing page. (i don't use hardware buttons expecially during night)
I'm gonna use this reader from now on I think.
Possible improvements from my point of view:
1) i'd like to have an option that allows auto opening of the last read ebook when opening Freda. Why opening the library every time?
2) It would be good to have a couple of presets regarding the color scheme. Usually I use white backgroung and black text during day and black background and grey/red text during night readings.
3) add the possibility to change page by tapping the screen. So, hardware button, or swipe thumb or tap.
Other less important improvements:
4) i usually read in portrait....but maybe add the possibility to read in landscape would be appreciated.
5) it would be nice to add the possibility to change also backlight power in the point 2) presets. IE: during night time low backlight, black background and gray text.
Finally let me add that the improvements I pointed out should help to make the program better (from my point of view) but Freda is really good already as it is, so don't consider them as a critic.
And congrats for the nice work.
TheRem said:
error on my Opal (QVGA).
Click to expand...
Click to collapse
Same error on Touch HD [Energy ROM Leo Build 23081]
TypeLoad Exception error
MrAce said:
Same error on Touch HD [Energy ROM Leo Build 23081]
Click to expand...
Click to collapse
Did you get this error after installing the application onto the Storage Card? Because right now (Beta 0.9 version) that doesn't work. The application has to be in main memory. For version 1.0 I will fix that. [fixed in release 1.0]
If you got the error even though the app was installed in main memory, then it's a problem that I haven't seen before. Normally that error message means that one of the program's DLLs or resource files is missing - and I thought that they were all present and correct in the install package. If you could PM me (or email on jim(at)turnip.demon.co.uk) with a listing/screenshot of all the contents of the \Program Files\Freda folder, I will take a look and see if I can spot the problem.
Thanks for the feedback.
Jim
McAndrew73 said:
...
1) i'd like to have an option that allows auto opening of the last read ebook when opening Freda. Why opening the library every time?
Click to expand...
Click to collapse
Good idea. I will do that for version 1.0
McAndrew73 said:
2) It would be good to have a couple of presets regarding the color scheme. Usually I use white backgroung and black text during day and black background and grey/red text during night readings.
Click to expand...
Click to collapse
makes sense. I don't want to add too many presets as it could get confusing ... but I guess I can come up with something for v1.0
McAndrew73 said:
3) add the possibility to change page by tapping the screen. So, hardware button, or swipe thumb or tap.
Click to expand...
Click to collapse
Right now, I need to reserve the 'tap screen' gesture for bringing up the main menu. I guess I could have a mode whereby it's tap-and-hold to bring up the menu, and quick-tap to page forward. I'm a little concerned though that if I have too many different 'command modes' I will end up with something like uBookReader which (though otherwise a fine piece of software) drives me crazy with trying to figure out which mode it is in. Another option would be to reserve tap-near-bottom-of-screen to mean 'page down' and tap-near-top-of-screen to mean scroll up. What do you think?
McAndrew73 said:
4) i usually read in portrait....but maybe add the possibility to read in landscape would be appreciated.
Click to expand...
Click to collapse
This should work already - if you can get the device into landscape mode, Freda will work in landscape mode. Freda relies on the operating system to tell it whether to work in landscape or portrait. On my HTC Touch Pro 2 I can switch modes by flipping the keyboard. For devices without a keyboard, you should try the G-Config application - run G-Config and follow the instructions (i.e. switch to Freda and then insert the stylus, then soft reset). Now, when you hold the device in landscape orientation, Freda should switch to landscape mode. You can find G-Config at http://forum.xda-developers.com/showthread.php?t=487991
McAndrew73 said:
5) it would be nice to add the possibility to change also backlight power in the point 2) presets. IE: during night time low backlight, black background and gray text.
Click to expand...
Click to collapse
Seems like a useful feature. I don't know how to program the backlight settings, but I guess this gives me the opportunity to learn
Thanks for using the app, and thankyou also for the feedback - I really appreciate it.
Jim
Jim Chapman said:
Good idea. I will do that for version 1.0
Click to expand...
Click to collapse
COOL!
makes sense. I don't want to add too many presets as it could get confusing ... but I guess I can come up with something for v1.0
Click to expand...
Click to collapse
Yes, I can understand. Reading a book should be sometihing really smooth and easy.
Right now, I need to reserve the 'tap screen' gesture for bringing up the main menu. I guess I could have a mode whereby it's tap-and-hold to bring up the menu, and quick-tap to page forward. I'm a little concerned though that if I have too many different 'command modes' I will end up with something like uBookReader which (though otherwise a fine piece of software) drives me crazy with trying to figure out which mode it is in. Another option would be to reserve tap-near-bottom-of-screen to mean 'page down' and tap-near-top-of-screen to mean scroll up. What do you think?
Click to expand...
Click to collapse
Well.....I think that both options are good.....so you should choose the easiest to implement.
I think I would slightly prefer the second one: tap the bottom for one page increase, tap the upper part for one page decrease.
This should work already - if you can get the device into landscape mode, Freda will work in landscape mode. Freda relies on the operating system to tell it whether to work in landscape or portrait. On my HTC Touch Pro 2 I can switch modes by flipping the keyboard. For devices without a keyboard, you should try the G-Config application - run G-Config and follow the instructions (i.e. switch to Freda and then insert the stylus, then soft reset). Now, when you hold the device in landscape orientation, Freda should switch to landscape mode. You can find G-Config at http://forum.xda-developers.com/showthread.php?t=487991
Click to expand...
Click to collapse
As I said, I read in potrait so no problem with that. I was just trying to brainstorm in order to get some possible enanchements to Freda.
Seems like a useful feature. I don't know how to program the backlight settings, but I guess this gives me the opportunity to learn
Thanks for using the app, and thankyou also for the feedback - I really appreciate it.
Jim
Click to expand...
Click to collapse
Thank YOU for the program and listening to my comments.
Jim Chapman said:
Did you get this error after installing the application onto the Storage Card? Because right now (Beta 0.9 version) that doesn't work. The application has to be in main memory. For version 1.0 I will fix that.
Click to expand...
Click to collapse
yes. it is installed in the Storage Card... i find a 6MB installer too large for the Main memory.
waiting for the fix. thanks Jim Chapman!
TheRem said:
yes. it is installed in the Storage Card... i find a 6MB installer too large for the Main memory.
waiting for the fix. thanks Jim Chapman!
Click to expand...
Click to collapse
In the meantime, if you have a Windows Mobile 6 device you could try the wm6 version. That's a much smaller install (about 1.3 MB). It's at http://www.turnip.demon.co.uk/jim/freda/installWM6/setup.msi
Cheers,
Jim
Jim Chapman said:
In the meantime, if you have a Windows Mobile 6 device you could try the wm6 version. That's a much smaller install (about 1.3 MB). It's at http://www.turnip.demon.co.uk/jim/freda/installWM6/setup.msi
Click to expand...
Click to collapse
oh... oh... i've installed the wrong file.
ok i'll try that. thanks!
Camera lock button
Yesterday I saw video from Windows mobile 7 showing dedicated camera button working even if the phone was locked. Today I bring this feature for HD2 on WM6.5.
Update:
7.9.2010 - I've uploaded version 1.1 see FAQ.
9.9.2010 - Version 1.2 brings support for CHT.
13.9.2010 - Version 1.2.1 fixes loading issue.
What is it and what it does
This little application starts phone's camera when user press home button when the phone is locked.
It is aware of proximity sensor status, so it won't start camera in your pocket.
It won't do anything if pda is not locked.
If your pda is locked and display is switched off, you must click home button twice.
Current limitations
Only for HD2, because of proximity sensor hardware.
Only works with original non-customized lockscreen, because unlocking is performed by sending mouse move events.
v1.1 has unlock gesture learning ability.
Planned features
Camcorder on windows button.
Support for pin.
Installation
Download cab file and run it on your device.
If you want application application to start with your device use camera_lock_button_with_autostart.cab otherwise you'll have to start it manually.
You must turn off this application before uninstallation or reinstallation.
FAQ
Q: Nothing happens when I start the application?
A: That's normal behaviour. Lock your device and try to click home button.
Q: How do I turn it off?
A: Run application again.
Q: How do I start it with device startup?
A: Download cab that ends with '_autostart' or add shortcut do your \Windows\StartUp folder.
Q: I'm getting "This application is not designed for your device!" message.
A: This application is only for HTC HD2. If you have HD2 then there's something wrong with your OEMINFO value. Check "\Windows\ModelName.txt" whether it contains 'HD2' or 'LEO' string.
Q: What is licence for icon?
A: I used free icon from dryicons.com .
Q: Why installer ignores location I picked for installation?
A: NEVER EVER install this application on Storage Card, always use device.
Q: Is there source code available?
A: Nope. Last time I published something under GPL everyone was ignoring it (GPL) completely.
Following FAQ applies only to v1.1
Q: How to learn it unlock gesture?
A:
Start it with shortcut named "Camera lock button toggle learning".
Lock device.
Make sure proximity sensor is not covered.
Press "windows" hw button. "Learning mode!" text should appear on screen.
Unlock device.
Done. Message informing you about success should appear. Learning mode is now switched off automagically.
You can delete "Camera lock button toggle learning" shortcut from start menu.
Q: Why isn't there autostart version of v1.1?
A: Because it needs beta testing and I don't want you to brick your device.
Q: Do I need to learn it gesture if I'm using unmodified lockscreen?
A: No. If there isn't learned gesture it uses default gesture from v1.0.
Q: Where is stored learned gesture?
A: In file \Windows\camera_lock_button_gesture.bin
(You will be asked if you want to remove it at the end of uninstallation.)
Q: What about unlocking the device with password?
A: If device is locked after camera application is closed, it won't be security hole. Maybe next time I'll implement it.
Changelog
v1.2.1:
Fixes forgetting of learned gesture after application was switched off.
v1.2:
Support for CHT.
v1.1:
Volume buttons are working again.
Gesture learning (= maybe S2U2 compatible).
Setup dll, so you don't need to make sure application is not running before uninstallation.
v1.0:
Initial release.
Compatible lockscreens
WM6.5 default (Confetti lock screen)
Co0kie's Home Tab lockscreen [worked for me, not worked for Guus_]
Maybe others but nobody informed me about it.
Not working with S2U2, I contacted author of S2U2 about it.
Reserved for future use.
Excelent work.....!!!
THX!!!
-----------
SteviCzech
GREAT idea, but I/we need to get this to work with Co0kie Home Tab. Can we expect CHT support in the future?
Thanks for sharing!
Why isn't it working with CHT? Different unlock screen? Different camera application?
Also I noticed it conflicts with htc volume control, right now by I'm betatesting fix.
Would it be possible to make compatible with Chris's Lockscreen [middle]? It puts the slider halfway down the screen. I HATE having the lock slider at the top!
Thanx for all your hard work MilaCzeque
Thanks for sharing!
Guus_ said:
GREAT idea, but I/we need to get this to work with Co0kie Home Tab. Can we expect CHT support in the future?
Thanks for sharing!
Click to expand...
Click to collapse
Yes, yes, yes ++. A lot people use Co0kie HT.
will you add future support for su2u?
Very cool idea, I'll have to switch back to the default lockscreen to try it.
Though, it would be cool if the X/Y values for the mouse event could be set in a file, for those of us with customized lock screens.
Edit: got around that by editting my LS_LockScene_480x800.cpr file.
Though, it would be nice if we could program in a "macro" to type in our passwords.
Cheers!
Jaxbot said:
Very cool idea, I'll have to switch back to the default lockscreen to try it.
Though, it would be cool if the X/Y values for the mouse event could be set in a file, for those of us with customized lock screens.
Edit: got around that by editting my LS_LockScene_480x800.cpr file.
Though, it would be nice if we could program in a "macro" to type in our passwords.
Cheers!
Click to expand...
Click to collapse
Very good tool, this is a subscribe
+1 on the configurable lockslider position (middle, left, right, and Y coord pixels), this would make your tools compatible with virtually any sliding lockscreen.
BTW, will the home button return to its normal function (display homescreen ) when the screen is not locked? I use it very often for that purpose.
Gave it some review/press here: http://windowsphonehacker.com/app_review_hd2_camera_lock_button-09-06-10.php
Also a video of it in action:
http://www.youtube.com/watch?v=3dLTP0Jf33E
Great job!
The ideas that continually out and on to the HD2 is still amazing!! I really like the progression of this feature. very genus to include the sensor with button activation!!
MilaCzeque said:
Why isn't it working with CHT? Different unlock screen? Different camera application?
Also I noticed it conflicts with htc volume control, right now by I'm betatesting fix.
Click to expand...
Click to collapse
Yes different lock/unlock screen. CHT is the most used application for the HD2 I think.
CHT support would be great!
bumpity bump on cht. that'd probably be worth a few bucks from me ;-)
could you publish source code?
YES, CHT support is very much needed with the ability of using HD Mini unlock screen. i'll definitely donate for this feature once you have configured it to work with my HD2
s2007 said:
could you publish source code?
Click to expand...
Click to collapse
he clearly explained why he won't in the first post, and I kind of understand him
v1.1
New version is out, see 1st post. It's a bit experimental so be careful and have fresh backup of your device in case anything bad happens.
ephestione said:
he clearly explained why he won't in the first post, and I kind of understand him
Click to expand...
Click to collapse
I'm sorry. My mistake I do not read cerfuly.
Is 1.1 compatibile with CHT lockscreen (manila style)?
On WM6.5 and WM6.5.x you have the option of using the new sliding lock screen. I for one prefer to use the old 'Windows Classic' lock screen (i.e. the one where you have to tap the soft key then an unlock button like in WM6.1, see images), as it uses less memory and allows me to see the today screen. However, on many ROMs for HTC phones, even stock ROMs, it doesn't seem to work properly with regards to incoming calls.
When you receive an incoming call, the lock screen pops up asking you to tap unlock, but it is unresponsive and obscures the caller ID screen, meaning you can't see who's calling you or the accept / reject slider. On phones / ROMs were it does work properly, you sometimes still have to press the unlock button manually before you can do anything.
This had annoyed me for ages and I couldn't find a solution, so since I am learning C++ at uni, I decided to try and teach myself Win32 programming and create a a program to fix it. The result was this little utility, my first windows mobile app
The program basically just sits and waits for an incoming call, and when the system notifies it of one, if the device is locked it waits for the unlock screen to pop up and then very quickly presses the '*' key. The result is that the device unlocks before the screen messes up, allowing you to see the dialler! The app is very lightweight (executable is only ~6KB), fast (native code), and does not use the CPU whilst idle since it makes use of the windows messaging notification system. Should theoretically work on any resolution on any device, but I've only tested it on my Touch Pro2 (WVGA).
I originally made this just for myself, but XDA Developers has been so useful to me over the years I thought it would be nice to share it with you guys For this reason it is provided as is, I may or may not add to it. I'll try and fix any bugs and stuff if they arise, but I'd like to keep it a simple, lightweight app.
[size=+1]VERSION HISTORY:[/size]
1.0 - Initial Release
1.1 - Multilingual support. If v1.0 works for you, you don't have to upgrade but you can if you like.
Fixed the bug that causes program to crash if not using an English ROM.
Removed message box that tells you you're using the sliding lock. Program now just exits silently.
CAB file now changes the registry key to disable the sliding lock screen for you.
[size=+1]INSTALLATION:[/size]
I've attached the EXE in a zip file, simply unzip, place it on your device somewhere and run it to activate the program. Run it again to exit the program. You might like to place a shortcut in \Windows\Startup. The program will not run if you have the WM6.5 sliding lock enabled, you need to have set:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\LockScreen] "Enable"= dword:00000000 (obviously).
I've also made a cab file which just simply places the EXE in \Program Files\DeviceLockXT, and creates a startup shortcut and the reg key for you, if you prefer
If you already have DeviceLockXT installed and are installing a newer version, you probably need to stop the old one from running first, and you should probably uninstall the old CAB before installing the new one. I don't know what difference it will make if any.
Enjoy!
DISCLAIMER: In the unlikely event that this program damages your device / causes you to lose data / kills your cat / whatever, I am not responsible. Use at your own risk.
Feel free to include it in a custom ROM if you like!
This looks interesting. Like you, I also do not like the latest lock screen (I've been searching forever for a better one). Does yours support PIN lock? And if you wouldn't mind, I think it'd be cool to see a screenshot (or just a google image), I'm not sure if I remember the classic lock screen you are referring to...
Certainly! Images added & first post updated
The reason I like it is that it isn't a lock screen as such, more of a lock softkey. This allows you to see through to the lovely HTC flip clock when the phone is locked / you turn it on to see the time. You only see the rather ugly looking grey screen when you want to unlock the device.
The program will run if you have PIN lock enabled, but there is no need to use the program in this case, it will literally sit there doing nothing. If you are using the PIN lock then the dialler screen works fine, at least on my phone anyway
To use the Windows Classic Lock Screen with a PIN just set:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\LockScreen]
"Enable"=dword:00000000
Then enable a PIN in Settings > Lock and you're good to go! No need to install my program You can also set:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\LockScreen]
"ShowLockScreenPicker"=dword:00000001
To get an extra tab in Settings > Lock which lets you change lock screen without editing the registry.
EDIT: There is not supposed to be a space between the c and r in LockScreen in the reg keys, don't know why the forum does that.
I'm also a fan of the "Windows Classic Lock Screen", and have encountered the same problem that you describe!
So thanks a lot for this great tool, I'm trying it ASAP.
i see your point of locking and seeing at the same time your home screen right there and then and i think i'm liking it. i'll give it a try. any chance to change the "ugly" gray unlock screen to something else? a simple black one would be good for me, or better still to a customized background.
edit: btw, does this work on stock wm 6.5? it says 6.5+ in your post.
Yup, I meant 6.5+ as in 6.5 and above (including both 6.5 and 6.5.x)
Not that I know of, the grey screen is part of the windows mobile locking program itself so I don't think it can be easily changed. On some ROMs I have tried the grey screen is skipped entirely, unlocking straight away when you press the softkey, but this is tied to something at the ROM level I think. So it's possible, but I don't have the time or ability to figure it out
Another way to do it would be to write your own locking program from the ground up that mimics the standard windows classic one, then you could do what you like, which interestingly is what I tried initially. But it was much harder than I thought! Defeats the point of utilising what is already on your phone though, which is what I like to to (minimal 3rd party software).
I repeat my program is NOT a stand alone lockscreen, but a utility to hopefully make the built in one work properly. In my opinion the windows classic lock is fine as it is, apart from the issue my program aims to fix
Great job!
This little app works very well and it does what it promises.
The grey screen is something that I've seached how to change for quite some time, but haven't found nothing. It would be very cool if we could edit it!
This is just awesome...thanks so much for sharing...
What about cooking this program into ROM? Is it fine to do so?
Yeah sure, it says so at the very end of the first post (under 'Disclaimer')
Uch, sorry, I never read disclaimers or other important notes.
Keep up great work. I'll include this software into my ROMs if I don't find anything annoying
thank you very much.this problem is annoying me for a long time,i'll have a try.is this work well,i'll get a reply.wish it work well and jack use it in his roms~
It's work very well in my phone,thank you very much~good job~
Been using this for a day or so now...no complains...works as intended. Thank you!
i find a problem with the app.when i use the app,the screenlight is turn on and turn off,it's change all the time.when i use the swith button to turn off the screen light,the screen light will turn on soon.and if i close the app ,the screen light became well.what's the wrong?can you help me ?
I'm not sure what would be causing that behaviour, what device are you using? What version of windows mobile / ROM are you using? Do you have any other screen lock type apps installed?
It is nice
but unfortunately it works only for WM6.1
i hope i can find one for WM6.5
jamiemckee said:
I'm not sure what would be causing that behaviour, what device are you using? What version of windows mobile / ROM are you using? Do you have any other screen lock type apps installed?
Click to expand...
Click to collapse
I use HTC TOUCH PRO 2 ,HTC Version.and the rom is Jackos EVO FULL v1.1.0.i don't installed another screen lock.do you know what cause the problem?thanks~
Delete Hd2ProximityScreenOff.lnk from /Windows/StartUp
Jackos said:
Delete Hd2ProximityScreenOff.lnk from /Windows/StartUp
Click to expand...
Click to collapse
Thank you very much ,i 'll have a try~
Not sure if this is impossible, easy, or even already accomplished, but coming from CM7 to MIUI there are two CM7 features that I am sorely missing:
1. Lockscreen gestures. I want to secure my device, but I've always hated that with Android you have to get past your "slide this there" lockscreen, THEN enter your pin or draw your pattern before you can get to the phone. With CM7, you can turn off the slides/rotaries/tabs/whatever that normally appear on the lockscreen (so it's just your lockscreen background, clock, and music controls) and set it to unlock when you draw whatever special invisible lockscreen gesture (which I also feel is more secure/less susceptible to onlookers than connecting dots on the Android pattern grid) you specified. This feature is great, and I think a lot of people misunderstand it!
If that isn't possible, does anyone know how you can at least turn off the conventional lockscreen if you have the pattern lock on? I really just hate the redundancy of the two-step unlock process.
2. (Screen off) long press volume-button track skipping. Simple as that. I need to be able to skip tracks without looking at my device (when running, driving, working out, whatever). Even lockscreen music controls don't cut it, because you have to click the screen on, look at it, poke the right button, relock the screen etc. When you're running, being able to long press on the volume up button to skip a track is HUGE.
I'm loving MIUI otherwise. Looking forward to Ace getting a handle on the wakelock, and sound/games/media issues.
As an aside, I do wish Xiamoi would release source code for people to comb through...it seems weird to me that a corporation--Chinese or otherwise--would sink untold dollars/development hours perfecting and making freely available a product that offers no clear monetization strategy. Furthermore, Huawei and Baidu's longstanding cooperation with Chinese Intelligence agencies makes me leery of Chinese corporate interest)
Gestures would be cool especially since on the default lock screen you have over half the screen of nothing.
(Accidentally hit reply. Oops.)
Kevin M said:
(Accidentally hit reply. Oops.)
Click to expand...
Click to collapse
Just wondering, if you accidentally hit reply, why "submit" the comment? You could have still avoided it.
Just found this flashable MIUI mod for the volume track skipping:
http://forums.miuiandroid.com/showthread.php?7356-MOD-Skip-track-via-volume-press
I haven't given it a shot yet, but if it works, it might be a good one to build into Ace's MIUI (like he inbuilt the extended settings mod).
Still keeping my eyes out for a lockscreen gesture mod.