Great deal
[emoji106]
Is there away around the password on first boot. I bought my op2 Second hand so I don't know the original pin
emilio242 said:
Is there away around the password on first boot. I bought my op2 Second hand so I don't know the original pin
Click to expand...
Click to collapse
Download this file: https://drive.google.com/file/d/0BzZGP6ljwL-XR1FnbG03dVVmOGM/view?usp=sharing
Then boot into fastboot mode and send the following commands
Code:
fastboot erase persist
fastboot flash persist persist.img
fastboot reboot
This is due to a password/fingerprint being active and is a security measure but the above steps will clear them.
Will v4a work on this rom?
phuongvl2016 said:
Will v4a work on this rom?
Click to expand...
Click to collapse
It already has Maxxaudio. V4A has not been tested so it may not work.
Awesome. These are full ROM's right? Incremental updates would be even better. Thanks for this.
Also, have you tried running Xposed on this, if so which version did you use.
Awesome to see Hydrogen OS getting some love.
I can't download via Google drive. Could you possibly upload via AFH?
Abdur Desai said:
Awesome. These are full ROM's right? Incremental updates would be even better. Thanks for this.
Also, have you tried running Xposed on this, if so which version did you use.
Awesome to see Hydrogen OS getting some love.
Click to expand...
Click to collapse
Yes these are full ROMs but unfortunately I do not plan to make incremental OTAs only full updates. This is for a few reasons but mainly that it's harder to maintain.
Xposed I have not personal had the chance to try yet but others have reported that it works fine
seangeezy12 said:
I can't download via Google drive. Could you possibly upload via AFH?
Click to expand...
Click to collapse
Uploading now. I am hoping to get a fix for audio tuner in place soon though.
Thanks for your work. I installed it and after the "Android is starting..." is finished it ends in a loop and the Hydrogen logo starts again...
Bostrot said:
Thanks for your work. I installed it and after the "Android is starting..." is finished it ends in a loop and the Hydrogen logo starts again...
Click to expand...
Click to collapse
Does it boot after that?
Bostrot said:
Thanks for your work. I installed it and after the "Android is starting..." is finished it ends in a loop and the Hydrogen logo starts again...
Click to expand...
Click to collapse
Has to be something strange to do with your environment or bad download. Did you do a full wipe (/system /data and /cache) prior to installing?
Kstarz said:
Has to be something strange to do with your environment or bad download. Did you do a full wipe (/system /data and /cache) prior to installing?
Click to expand...
Click to collapse
Yes a full wipe with TWRP. I downloaded it a few times. Also the files from the old post but it was the same. @seangeezy12 Yes it boots with the Android is starting loop
Dirty flashed the last version over a full blown H2os . boot just fine. One thing that took forever and with several reboots was updating google services. Other than that I like it a lot.
Abdur Desai said:
Awesome. These are full ROM's right? Incremental updates would be even better. Thanks for this.
Also, have you tried running Xposed on this, if so which version did you use.
Awesome to see Hydrogen OS getting some love.
Click to expand...
Click to collapse
Yes Xposed is working perfectly fine on this awesome ROM
I wanna download this. I've been itching for a new ROM but this Google drive won't let me download. Patiently waiting for the upload of AFH
seangeezy12 said:
I wanna download this. I've been itching for a new ROM but this Google drive won't let me download. Patiently waiting for the upload of AFH
Click to expand...
Click to collapse
Done check OP
Kstarz said:
Done check OP
Click to expand...
Click to collapse
Thank you kind sir. Will give my review after a day or 2 of running. I'm sure it's a dope ROM though
Related
https://developers.google.com/android/nexus/images?hl=en
Wow nice !!!
Let's Rock!
Can't wait for pure nexus to update to N
Sent from my Nexus 6P using Tapatalk
YES!
Is it possible to flash the factory image using flashfire?
Im currently using this ROM (Stock+Nougat-NRD90M Debloated-Prerooted-Odex-Busybox-Fast & Stable).
Vegeta700 said:
Is it possible to flash the factory image using flashfire?
Im currently using this ROM (Stock+Nougat-NRD90M Debloated-Prerooted-Odex-Busybox-Fast & Stable).
Click to expand...
Click to collapse
I only flash via fastboot and when going between versions I'd personally want to do a fully clean flash. Mind you I reverted to MM after trying N for a couple days, but again, I'd never flash a full factory image via Flashfire.
Vegeta700 said:
Is it possible to flash the factory image using flashfire?
Im currently using this ROM (Stock+Nougat-NRD90M Debloated-Prerooted-Odex-Busybox-Fast & Stable).
Click to expand...
Click to collapse
Unless a lot of users have certified that flashing via dlash fire works, I would recommend a clean flash via fastboot. This way you are flashing the images the most direct way possible. Doing this will also reduce possible entry points for issues.
First person to find an .mbn file in the boot.img or bootloader.img gets SO much cred.
Oh my .. Time to flashing silently
Is there a list of apps that currently don't work (or do work) with 7.0? I'm trying to switch over but there's a couple core apps that I need to know will work fine.
kaslopis said:
Is there a list of apps that currently don't work (or do work) with 7.0? I'm trying to switch over but there's a couple core apps that I need to know will work fine.
Click to expand...
Click to collapse
There's a thread called "Android N: What doesnt work" here in general
david279 said:
There's a thread called "Android N: What doesnt work" here in general
Click to expand...
Click to collapse
Most of the apps on that list that I use did not have the stated issues... None of them did.. I'm not sure if that list is up to date.
You're welcome.
I just finished flashing back to 6.0.1 and getting everything set up.
Of course now it gets released...
E30Nova said:
You're welcome.
I just finished flashing back to 6.0.1 and getting everything set up.
Of course now it gets released...
Click to expand...
Click to collapse
You aren't alone. Went back a day ago myself.
Sent from my Nexus 6P using Tapatalk
From what I've seen, this version isn't all that superb. Being on 6 isn't so bad
I've honestly had zero issues with the factory image for N. I wiped everything and clean flashed the image flat. Once I restored all my apps (around 80), so far it seems very smooth. No issues with lag in either the system or the fingerprint scanner.
I keep getting an error about not being able to find systsem.img in its package.. In thought they fixed this in the flash all script in 5.0 for factory images?
Soured Lie said:
I keep getting an error about not being able to find systsem.img in its package.. In thought they fixed this in the flash all script in 5.0 for factory images?
Click to expand...
Click to collapse
Flash-all is still broken afaik, better flash the individual img`s in fastboot.
Hey y'all,
Sorry to bother here. I looked around but couldn't find anything. I'm running NRD90M on my phone. I install TWRP and I rooted my 6P + unlocked bootloader. However I just downloaded the full image on google NRD90U. I'd like to put back my phone to stock with this new image and be able to just keep it stock and receive OTA. Can someone help me out or giving me a link where there's a tutorial. I already downloaded Fastboot/ADB and installed my drivers.
PS: It's find if it wipes everything. I just want it clean.
Thanks!
StangATX
Hey guys nougat is available to download for axon 7.
A2017U only, of course...
(so far)
Just restored to stock form LeanageOS to give it a spin. Downloading now. Although I saw it on Reddit first ><
I remember lots of people in the other nougat threads that ripped on ZTE saying there's no way it would be ready.. a little late, but not too late. Good job ZTE.
Takenover83 said:
Just restored to stock form LeanageOS to give it a spin. Downloading now. Although I saw it on Reddit first ><
Click to expand...
Click to collapse
Just did the same. Flashed full b29, downloaded update and it failed.
Factory reset, now waiting for download again.
lafester said:
Just did the same. Flashed full b29, downloaded update and it failed.
Factory reset, now waiting for download again.
Click to expand...
Click to collapse
I had the same problem. On my 2nd go around as well. First time I restored B29 from TWRP. After the failed update. I reflashed B29 via the official recovery, and then re-downloaded the Nougate update again. Will update.
Edit: Success.
Takenover83 said:
I had the same problem. On my 2nd go around as well. First time I restored B29 from TWRP. After the failed update. I reflashed B29 via the official recovery, and then re-downloaded the Nougate update again. Will update.
Edit: Success.
Click to expand...
Click to collapse
Nice. almost there myself.
Takenover83 said:
I had the same problem. On my 2nd go around as well. First time I restored B29 from TWRP. After the failed update. I reflashed B29 via the official recovery, and then re-downloaded the Nougate update again. Will update.
Edit: Success.
Click to expand...
Click to collapse
Do you recommend to unlock bootloader before upgrading?
jorch_oc said:
Do you recommend to unlock bootloader before upgrading?
Click to expand...
Click to collapse
Don't know yet. A beta user said all they had to do was go into fastboot and unlock... Hopefully the release build is the same.
So... either wait and see, unlock now, or go for it and be the first to try.
Does nougat have the dreaded power management?
Just tested Daydream a bit. The power button is no longer a problem
But I can't find any options to adjust blur or flicker like in LeanageOS. Also, I still get quiet a bit of drifting to the right. Was hoping Official would help with that, as other fixes/solutions had minimal impact for me.
borijess said:
Does nougat have the dreaded power management?
Click to expand...
Click to collapse
It now has 3 options
Always remind to clean
Auto-clean without reminding
Do not clean
Fastboot doesn't appear to accept any commands unfortunately.
Is this still MiFavour 4.0 or maybe a new version?
4.2
lafester said:
Fastboot doesn't appear to accept any commands unfortunately.
Click to expand...
Click to collapse
Yep, was like grrr when I went to flash twrp.
Takenover83 said:
Yep, was like grrr when I went to flash twrp.
Click to expand...
Click to collapse
So what's the easiest method to install? Trying tennear's tool but I keep getting failed to open recovery.bin.
It came OTA
Could somebody pls pull the ota link?
I can confirm. I am downloading right now. I will try to pull the OTA when it has finished.
## I TAKE NO RESPONSIBILITY IF YOU BRICK YOUR DEVICE##
THIS IS A MATERIAL TWRP IMG THAT I MADE FOR THE PAYTON
I HAVE TESTED THIS WHIT MY OWN DEVICE
ITS IS FULLY STABLE NOW YOU ALL TO ENJOY!!!
BUT IM STILL TWEAKING THING
INSTALL THE SAME WAS AS EVERY OTHER TWRP IMG
RECOMMEND CLEAN INSTALL DO NOT INSTALL OVER OTHER TWRP
reboot to bootloader
run this command
Fastboot boot TWRP-payton-material.img
wait for it to boot
then flash the installer zip
IF YOU KEEP REBOOTING BACK INTO TWRP REFLASH MAGISK
TO GET THE ADD ON TO BE ABLE TO CHANGE COLOR LAYOUT AND ALL THAT
AFTER FLASH COMPLETELY REBOOT BACK TO OS
THEN REBOOT BACK TO TWRP CLICK THE ICON NEXT TO SETTING IN THE TOP RIGHT
IT WILL ASK YOU FOR UI.ZIP CLICK CHANGE THEME SWIPE TO FLASH AND THERE YOU GO
DOWNLOAD
I HOPE EVERYONE ENJOYS!!!
FEATURES SO FAR
EVERYTHING IS WORKING!!!
MTP(YES)
OTG(YES)
ADB SIDELOAD(YES)
DECRYPTION(YES)
BONUS TWEAKS BUILT IN (YES)
GROUP AND BUG REPORTS
will this stay in place with a rom OTA (like havoc?)
themedicduck said:
will this stay in place with a rom OTA (like havoc?)
Click to expand...
Click to collapse
At this time i cant give a 100% yes
I only have a couple of beta tester as of right now
But they have reported it work like normal
so I do be leave that it will
if you do a OTA and it fails please tell me asap
Im still working on it but is stable enough to be beta tested :good:
FizzyAps said:
At this time i cant give a 100% yes
I only have a couple of beta tester as of right now
But they have reported it work like normal
so I do be leave that it will
if you do a OTA and it fails please tell me asap
Im still working on it but is stable enough to be beta tested :good:
Click to expand...
Click to collapse
Good deal.
I'm guessing dirty flashing this over my current TWRP is a bad idea? Clean install?
Recommend clean install do not install over other twrp
FizzyAps said:
Recommend clean install do not install over other twrp
Click to expand...
Click to collapse
Ok.
Did you do anything special to get this to build?
What sources are you using? Omni trees or los?
gee one said:
Did you do anything special to get this to build?
What sources are you using? Omni trees or los?
Click to expand...
Click to collapse
I de-compiled the official 3.2.3-1 and syberhexen 3.2.3-0
and re-compiled
them together with the themed ui the us see to get stable result
so mix of both
gee one said:
Did you do anything special to get this to build?
What sources are you using? Omni trees or los?
Click to expand...
Click to collapse
you can follow the build and updates on all are twrps here
https://t.me/motox4twrp
themedicduck said:
will this stay in place with a rom OTA (like havoc?)
Click to expand...
Click to collapse
There is no longer a recovery partition, instead recovery is built into the boot.img on X4 (and all other slot A/B devices)
So when you flash a rom, that file gets updated and you loose twrp.
The only way around that would be a custom installer that manually installs twrp during flash.
SchmilK said:
There is no longer a recovery partition, instead recovery is built into the boot.img on X4 (and all other slot A/B devices)
So when you flash a rom, that file gets updated and you loose twrp.
The only way around that would be a custom installer that manually installs twrp during flash.
Click to expand...
Click to collapse
Gotcha ok. I think I get it now. So if I don't want TWRP to be overwritten, I'll just have to manually flash updates every time like I do now.
themedicduck said:
Gotcha ok. I think I get it now. So if I don't want TWRP to be overwritten, I'll just have to manually flash updates every time like I do now.
Click to expand...
Click to collapse
You have to flash TWRP after every rom flash whether its OTA or manual.
Thank you for providing the decrypt function.
But I use a 6x6 pattern, and it is literally impossible to succeed with my pattern since the dots are so close together. Possible to spread them out?
I need to know: What are the bonus tweaks built in? Thanks
flieswithhawks said:
I need to know: What are the bonus tweaks built in? Thanks
Click to expand...
Click to collapse
Everything listed in the post
Which installer, TWRP-payton-Material-stb1 or TWRP-payton-material-installer? What's the difference?
flieswithhawks said:
I need to know: What are the bonus tweaks built in? Thanks
Click to expand...
Click to collapse
BONUS TWEAKS BUILT IN (YES)
It says right there. (YES)
I'd also like a list of what exactly the bonus tweaks are, as they are apparently mixed in with regular non-tweaked content.
So, in the context of recovery images... how exactly is there such a thing as a "dirty" flash? A flash is a flash for the recovery image. It is contained. What am I missing?
Please tell me!
TWRP-payton-Material-stb1.img or TWRP-payton-material.img - what's the difference, which one to use? Will the project be further developed - 3.3.1-0?
Thank you for a good job!
@FizzyAps Nicely done. Although I wish I could get the theme used when booting from the IMG file (TWRP-payton-material.img). -- That was impressive! Unfortunately, I see that the installer (and the ui.zip) do not include that. Still, it is both a visual and tech improvement over the current stock TWRP.
I tried like 5 times to do that and all the times my phone get on a bootloop. What am Im doing wrong? I tried adb xiaomi tools , xiaomi flash... but it doesnt work I downloaded form the official site i open the bootloader I installed twrp. Do I have to do anything more?
Gerard03 said:
I tried like 5 times to do that and all the times my phone get on a bootloop. What am Im doing wrong? I tried adb xiaomi tools , xiaomi flash... but it doesnt work I downloaded form the official site i open the bootloader I installed twrp. Do I have to do anything more?
Click to expand...
Click to collapse
No , device
Yangasto said:
No , device
Click to expand...
Click to collapse
Its my device its not working or its because the rom is buggy?
The last eu ROMs for umi are very buggy. You could try to install 12.0.8. that one is working quite good. Or maybe better to wait for a reliable Rom.
Frits28 said:
The last eu ROMs for umi are very buggy. You could try to install 12.0.8. that one is working quite good. Or maybe better to wait for a reliable Rom.
Click to expand...
Click to collapse
Ok thanks i will try it
Frits28 said:
The last eu ROMs for umi are very buggy. You could try to install 12.0.8. that one is working quite good. Or maybe better to wait for a reliable Rom.
Click to expand...
Click to collapse
I tried the 12.0.8 And it gets stuck on the miui colored letters that comes after 5g
Did you follow the correct steps? For instance format data instead of clear data?
And beware, first start can take minutes.
Frits28 said:
Did you follow the correct steps? For instance format data instead of clear data?
And beware, first start can take minutes.
Click to expand...
Click to collapse
I cean data dalvic and format data im gona try to re erase a reflash it
Gerard03 said:
I cean data dalvic and format data im gona try to re flash it
Click to expand...
Click to collapse
Frits28 said:
Did you follow the correct steps? For instance format data instead of clear data?
And beware, first start can take minutes.
Click to expand...
Click to collapse
I finally done it thanks for the help. Do i can update the rom by ota or its also bug
You're welcome.
Better to stay on 12.0.8 and wait for a better rom.
Frits28 said:
Did you follow the correct steps? For instance format data instead of clear data?
And beware, first start can take minutes.
Click to expand...
Click to collapse
Ok thanks fr all the info
Hi i replace the old battery because was dead.
I installed this original new battery but on lineage os can reach 100%, even trying the calibration guide the battery is stuck to 75-79%.
But now booting into twrp i'm actually seeing the battery going to 100%... can someone knows how to fix?
Sorry for my bad english but it's not my primary language
Thanks!
Which LineageOS version are you on?
3y3k3y said:
Which LineageOS version are you on?
Click to expand...
Click to collapse
17.1 by zeroltexx based on android 10
Nabbus_ said:
17.1 by zeroltexx based on android 10
Click to expand...
Click to collapse
I had trouble (not battery, but wifi) with that rom, since it is compiled for the regular S6. You can see this in the info-tab in settings. 920 instead of 925.
I installed the 18.1 and problems were gone.
Use this one:
lineage-18.1-20220205-UNOFFICIAL-zeroltexx.zip
3y3k3y said:
I had trouble (not battery, but wifi) with that rom, since it is compiled for the regular S6. You can see this in the info-tab in settings. 920 instead of 925.
I installed the 18.1 and problems were gone.
Use this one:
lineage-18.1-20220205-UNOFFICIAL-zeroltexx.zip
Click to expand...
Click to collapse
thanks! for the gapps, i'll must use the pico ones?
arm64/android11/nano is what I used. Pico should be fine, too.
3y3k3y said:
arm64/android11/nano is what I used. Pico should be fine, too.
Click to expand...
Click to collapse
lets see if works, i'm downloading those files..
btw i used that rom bcs the others were stuck on lineageos boot animation
Nabbus_ said:
lets see if works, i'm downloading those files..
btw i used that rom bcs the others were stuck on lineageos boot animation
Click to expand...
Click to collapse
I read first boot could take up to 30 (!!!) minutes. Can be this long, doesn't need to be. I did my install onto a fresh wipe/format.
First boot (installation) was very quick. Maybe 5 minutes or so.
3y3k3y said:
I read first boot could take up to 30 (!!!) minutes. Can be this long, doesn't need to be. I did my install onto a fresh wipe/format.
First boot (installation) was very quick. Maybe 5 minutes or so.
Click to expand...
Click to collapse
wow i didn't know
okay now i'm installing lineage, magisk and gapps, let's see if works ç_ç
Nabbus_ said:
wow i didn't know
okay now i'm installing lineage, magisk and gapps, let's see if works ç_ç
Click to expand...
Click to collapse
the phone boot up, first thing to appear is "speech service by google keeps stopping" xD
Nabbus_ said:
the phone boot up, first thing to appear is "speech service by google keeps stopping" xD
Click to expand...
Click to collapse
Had that, too. But assistant works.