## I TAKE NO RESPONSIBILITY IF YOU BRICK YOUR DEVICE##
THIS IS A MATERIAL TWRP IMG THAT I MADE FOR THE PAYTON
I HAVE TESTED THIS WHIT MY OWN DEVICE
ITS IS FULLY STABLE NOW YOU ALL TO ENJOY!!!
BUT IM STILL TWEAKING THING
INSTALL THE SAME WAS AS EVERY OTHER TWRP IMG
RECOMMEND CLEAN INSTALL DO NOT INSTALL OVER OTHER TWRP
reboot to bootloader
run this command
Fastboot boot TWRP-payton-material.img
wait for it to boot
then flash the installer zip
IF YOU KEEP REBOOTING BACK INTO TWRP REFLASH MAGISK
TO GET THE ADD ON TO BE ABLE TO CHANGE COLOR LAYOUT AND ALL THAT
AFTER FLASH COMPLETELY REBOOT BACK TO OS
THEN REBOOT BACK TO TWRP CLICK THE ICON NEXT TO SETTING IN THE TOP RIGHT
IT WILL ASK YOU FOR UI.ZIP CLICK CHANGE THEME SWIPE TO FLASH AND THERE YOU GO
DOWNLOAD
I HOPE EVERYONE ENJOYS!!!
FEATURES SO FAR
EVERYTHING IS WORKING!!!
MTP(YES)
OTG(YES)
ADB SIDELOAD(YES)
DECRYPTION(YES)
BONUS TWEAKS BUILT IN (YES)
GROUP AND BUG REPORTS
will this stay in place with a rom OTA (like havoc?)
themedicduck said:
will this stay in place with a rom OTA (like havoc?)
Click to expand...
Click to collapse
At this time i cant give a 100% yes
I only have a couple of beta tester as of right now
But they have reported it work like normal
so I do be leave that it will
if you do a OTA and it fails please tell me asap
Im still working on it but is stable enough to be beta tested :good:
FizzyAps said:
At this time i cant give a 100% yes
I only have a couple of beta tester as of right now
But they have reported it work like normal
so I do be leave that it will
if you do a OTA and it fails please tell me asap
Im still working on it but is stable enough to be beta tested :good:
Click to expand...
Click to collapse
Good deal.
I'm guessing dirty flashing this over my current TWRP is a bad idea? Clean install?
Recommend clean install do not install over other twrp
FizzyAps said:
Recommend clean install do not install over other twrp
Click to expand...
Click to collapse
Ok.
Did you do anything special to get this to build?
What sources are you using? Omni trees or los?
gee one said:
Did you do anything special to get this to build?
What sources are you using? Omni trees or los?
Click to expand...
Click to collapse
I de-compiled the official 3.2.3-1 and syberhexen 3.2.3-0
and re-compiled
them together with the themed ui the us see to get stable result
so mix of both
gee one said:
Did you do anything special to get this to build?
What sources are you using? Omni trees or los?
Click to expand...
Click to collapse
you can follow the build and updates on all are twrps here
https://t.me/motox4twrp
themedicduck said:
will this stay in place with a rom OTA (like havoc?)
Click to expand...
Click to collapse
There is no longer a recovery partition, instead recovery is built into the boot.img on X4 (and all other slot A/B devices)
So when you flash a rom, that file gets updated and you loose twrp.
The only way around that would be a custom installer that manually installs twrp during flash.
SchmilK said:
There is no longer a recovery partition, instead recovery is built into the boot.img on X4 (and all other slot A/B devices)
So when you flash a rom, that file gets updated and you loose twrp.
The only way around that would be a custom installer that manually installs twrp during flash.
Click to expand...
Click to collapse
Gotcha ok. I think I get it now. So if I don't want TWRP to be overwritten, I'll just have to manually flash updates every time like I do now.
themedicduck said:
Gotcha ok. I think I get it now. So if I don't want TWRP to be overwritten, I'll just have to manually flash updates every time like I do now.
Click to expand...
Click to collapse
You have to flash TWRP after every rom flash whether its OTA or manual.
Thank you for providing the decrypt function.
But I use a 6x6 pattern, and it is literally impossible to succeed with my pattern since the dots are so close together. Possible to spread them out?
I need to know: What are the bonus tweaks built in? Thanks
flieswithhawks said:
I need to know: What are the bonus tweaks built in? Thanks
Click to expand...
Click to collapse
Everything listed in the post
Which installer, TWRP-payton-Material-stb1 or TWRP-payton-material-installer? What's the difference?
flieswithhawks said:
I need to know: What are the bonus tweaks built in? Thanks
Click to expand...
Click to collapse
BONUS TWEAKS BUILT IN (YES)
It says right there. (YES)
I'd also like a list of what exactly the bonus tweaks are, as they are apparently mixed in with regular non-tweaked content.
So, in the context of recovery images... how exactly is there such a thing as a "dirty" flash? A flash is a flash for the recovery image. It is contained. What am I missing?
Please tell me!
TWRP-payton-Material-stb1.img or TWRP-payton-material.img - what's the difference, which one to use? Will the project be further developed - 3.3.1-0?
Thank you for a good job!
@FizzyAps Nicely done. Although I wish I could get the theme used when booting from the IMG file (TWRP-payton-material.img). -- That was impressive! Unfortunately, I see that the installer (and the ui.zip) do not include that. Still, it is both a visual and tech improvement over the current stock TWRP.
Related
Great deal
[emoji106]
Is there away around the password on first boot. I bought my op2 Second hand so I don't know the original pin
emilio242 said:
Is there away around the password on first boot. I bought my op2 Second hand so I don't know the original pin
Click to expand...
Click to collapse
Download this file: https://drive.google.com/file/d/0BzZGP6ljwL-XR1FnbG03dVVmOGM/view?usp=sharing
Then boot into fastboot mode and send the following commands
Code:
fastboot erase persist
fastboot flash persist persist.img
fastboot reboot
This is due to a password/fingerprint being active and is a security measure but the above steps will clear them.
Will v4a work on this rom?
phuongvl2016 said:
Will v4a work on this rom?
Click to expand...
Click to collapse
It already has Maxxaudio. V4A has not been tested so it may not work.
Awesome. These are full ROM's right? Incremental updates would be even better. Thanks for this.
Also, have you tried running Xposed on this, if so which version did you use.
Awesome to see Hydrogen OS getting some love.
I can't download via Google drive. Could you possibly upload via AFH?
Abdur Desai said:
Awesome. These are full ROM's right? Incremental updates would be even better. Thanks for this.
Also, have you tried running Xposed on this, if so which version did you use.
Awesome to see Hydrogen OS getting some love.
Click to expand...
Click to collapse
Yes these are full ROMs but unfortunately I do not plan to make incremental OTAs only full updates. This is for a few reasons but mainly that it's harder to maintain.
Xposed I have not personal had the chance to try yet but others have reported that it works fine
seangeezy12 said:
I can't download via Google drive. Could you possibly upload via AFH?
Click to expand...
Click to collapse
Uploading now. I am hoping to get a fix for audio tuner in place soon though.
Thanks for your work. I installed it and after the "Android is starting..." is finished it ends in a loop and the Hydrogen logo starts again...
Bostrot said:
Thanks for your work. I installed it and after the "Android is starting..." is finished it ends in a loop and the Hydrogen logo starts again...
Click to expand...
Click to collapse
Does it boot after that?
Bostrot said:
Thanks for your work. I installed it and after the "Android is starting..." is finished it ends in a loop and the Hydrogen logo starts again...
Click to expand...
Click to collapse
Has to be something strange to do with your environment or bad download. Did you do a full wipe (/system /data and /cache) prior to installing?
Kstarz said:
Has to be something strange to do with your environment or bad download. Did you do a full wipe (/system /data and /cache) prior to installing?
Click to expand...
Click to collapse
Yes a full wipe with TWRP. I downloaded it a few times. Also the files from the old post but it was the same. @seangeezy12 Yes it boots with the Android is starting loop
Dirty flashed the last version over a full blown H2os . boot just fine. One thing that took forever and with several reboots was updating google services. Other than that I like it a lot.
Abdur Desai said:
Awesome. These are full ROM's right? Incremental updates would be even better. Thanks for this.
Also, have you tried running Xposed on this, if so which version did you use.
Awesome to see Hydrogen OS getting some love.
Click to expand...
Click to collapse
Yes Xposed is working perfectly fine on this awesome ROM
I wanna download this. I've been itching for a new ROM but this Google drive won't let me download. Patiently waiting for the upload of AFH
seangeezy12 said:
I wanna download this. I've been itching for a new ROM but this Google drive won't let me download. Patiently waiting for the upload of AFH
Click to expand...
Click to collapse
Done check OP
Kstarz said:
Done check OP
Click to expand...
Click to collapse
Thank you kind sir. Will give my review after a day or 2 of running. I'm sure it's a dope ROM though
Dual boot Patcher now works with our v20 I can confirm it works with the h918 but I cannot confirm it works with any of the others but as they are the same Hardware I cannot see why not.
I take no credit for this mod as all I did was send the original developer the necessary files to get it working on our phones, so go give @chenxiaolong a thanks and go here http://forum.xda-developers.com/showthread.php?t=2447534&page=1083
To download the latest snapshot and DualBoot utilities to easily managed between the two or three or however many you get.
This will really come in handy once we get Aosp up and running for our devices! Set alarm just putting this here in case anyone is interested.
jthrasher47 said:
Dual boot Patcher now works with our v20 I can confirm it works with the h918 but I cannot confirm it works with any of the others but as they are the same Hardware I cannot see why not.
I take no credit for this mod as all I did was send the original developer the necessary files to get it working on our phones, so go give @chenxiaolong a thanks and go here http://forum.xda-developers.com/showthread.php?t=2447534&page=1083
To download the latest snapshot and DualBoot utilities to easily managed between the two or three or however many you get.
This will really come in handy once we get Aosp up and running for our devices! Set alarm just putting this here in case anyone is interested.
Click to expand...
Click to collapse
Thank you so much for the heads up on this! I used this on my Note 4 and loved it!
Sent from my LG-H918 using Tapatalk
Thanks for sharing! Works great! Just flashed CM as secondary
Be warned, I used this with NATFs ROM as a primary and CM as secondary and I got locked out of my phone when going back to NATFs ROM. Pattern lock said it was wrong pattern. So be careful and disable lockscreen and fingerprints before doing this. There are still some bugs floating around.
But nice job and great progress for our phones!!!
jthrasher47 said:
Dual boot Patcher now works with our v20 I can confirm it works with the h918 but I cannot confirm it works with any of the others but as they are the same Hardware I cannot see why not.
I take no credit for this mod as all I did was send the original developer the necessary files to get it working on our phones, so go give @chenxiaolong a thanks and go here http://forum.xda-developers.com/showthread.php?t=2447534&page=1083
To download the latest snapshot and DualBoot utilities to easily managed between the two or three or however many you get.
This will really come in handy once we get Aosp up and running for our devices! Set alarm just putting this here in case anyone is interested.
Click to expand...
Click to collapse
For some reason I'm losing root on my secondary rom. I checked the dual boot thread and did not figure it out. Any ideas on what I can try? Thanks
Edit: I figured it out. If I flash it in twrp root sticks.
Sent from my LG-H918 using Tapatalk
For future reference for anyone with root sticking problems.. Just patche the SuperSU. Zip for dual or multi whatever you are going to use then flash it either in app or recovery and when you are booted into your secondary Rom make sure to set kernel accordingly
dfogelstrom said:
Be warned, I used this with NATFs ROM as a primary and CM as secondary and I got locked out of my phone when going back to NATFs ROM. Pattern lock said it was wrong pattern. So be careful and disable lockscreen and fingerprints before doing this. There are still some bugs floating around.
But nice job and great progress for our phones!!!
Click to expand...
Click to collapse
If you do run into this, delete all `lockscreen.db*` files in `/data/system/`.
Yes, it is good etiquette to remove lock screen patterns and fingerprints before installing a new ROM in any of your slots as it will not let you in when you go back to the other
I was having issues with this on my ls997. I was running teamdev ROM with werewolf kernel set as primary. I patched resurrection remix for secondary and tried to flash through app and got an error. So I tried to flash from TWRP and it failed to flash. I saw an error about the us996 at some point. Anyone have this working on ls997? What am I doing wrong?
almony8 said:
I was having issues with this on my ls997. I was running teamdev ROM with werewolf kernel set as primary. I patched resurrection remix for secondary and tried to flash through app and got an error. So I tried to flash from TWRP and it failed to flash. I saw an error about the us996 at some point. Anyone have this working on ls997? What am I doing wrong?
Click to expand...
Click to collapse
Did you patch the Rom and gapps zips before flashing?
Yes I patched them. I even tried downloading the ROM again. Still no luck. Any other thoughts?
almony8 said:
Yes I patched them. I even tried downloading the ROM again. Still no luck. Any other thoughts?
Click to expand...
Click to collapse
What's the error?
Zacharee1 said:
What's the error?
Click to expand...
Click to collapse
I didn't get a screenshot or anything but it said something about it not being a h918. It said like file type unrecognized
almony8 said:
I was having issues with this on my ls997. I was running teamdev ROM with werewolf kernel set as primary. I patched resurrection remix for secondary and tried to flash through app and got an error. So I tried to flash from TWRP and it failed to flash. I saw an error about the us996 at some point. Anyone have this working on ls997? What am I doing wrong?
Click to expand...
Click to collapse
Unfortunately this dual boot Patcher is setup for the h918.
So what you were going to have to do to get it working is extract the entire Resurrection ROM folder and open the updater script and remove the get prop lines and then save the file and rezip then patch and Flash after that all should be well
jthrasher47 said:
Unfortunately this dual boot Patcher is setup for the h918.
So what you were going to have to do to get it working is extract the entire Resurrection ROM folder and open the updater script and remove the get prop lines and then save the file and rezip then patch and Flash after that all should be well
Click to expand...
Click to collapse
I'll hold off I guess until RR gets a little further along instead of messing with it now
almony8 said:
I was having issues with this on my ls997. I was running teamdev ROM with werewolf kernel set as primary. I patched resurrection remix for secondary and tried to flash through app and got an error. So I tried to flash from TWRP and it failed to flash. I saw an error about the us996 at some point. Anyone have this working on ls997? What am I doing wrong?
Click to expand...
Click to collapse
works fine
almony8 said:
I'll hold off I guess until RR gets a little further along instead of messing with it now
Click to expand...
Click to collapse
It works
I admit its a bit confusing but once you figure it out it will be so easy to use
ricohz said:
works fine
Click to expand...
Click to collapse
Did you do what he said to do with removing the prop stuff or just install and use regular?
---------- Post added at 10:56 PM ---------- Previous post was at 10:54 PM ----------
ricohz said:
It works
I admit its a bit confusing but once you figure it out it will be so easy to use
Click to expand...
Click to collapse
I used this dual boot before on old phones without issues, just not working for me on this phone. I'll give it another shot when I have the time
just a regular install
I was having trouble with patching the zip files
so with file explorer I went to file's location and saw that the patch files were way smaller(for example gapps patch zip was like 20mg) so i deleted all the files and started over
jthrasher47 said:
Unfortunately this dual boot Patcher is setup for the h918.
So what you were going to have to do to get it working is extract the entire Resurrection ROM folder and open the updater script and remove the get prop lines and then save the file and rezip then patch and Flash after that all should be well
Click to expand...
Click to collapse
Device.json? Or am I in the wrong file?
Hey guys.
The below is my full experience of how I flashed TWRP, the Xiaomi.eu rom and rooted with Magisk. Whilst it essentially is a step-by-step, it also contains not only how I succeeded but also how I encountered issues and so...
*UPDATE!*
Here is a slightly condensed verison with thanks to @airwebber
Get the latest xiaomi.eu rom from here or here, just scroll down and find the "xiaomi.eu_multi_MI9..." version.
https://sourceforge.net/p/xiaomi-eu...ty/?page=0&limit=100#5cb9f96ee8ba7c44716e87ff
Get the latest magisk (magisk v19 works at the time of writing this post):
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Some versions of twrp may not work on older builds other than the latest (9.4.25) and so use this one with:
https://mega.nz/#!CH5jgYTB!yNqOiVoo3cf0_15jIwZ-btO52cvpOG7iZrRCe19V2Nc
Once the waiting time elapses (usually 360 hours) use the MiFlash tool to unlock the bootloader. Warning: this wipes your phone entirely, so be sure to backup anything of importance.
Unlocking takes a few minutes and once 100% complete your Mi 9 will reboot. Your phone will say “unlocked” on the first splash screen while booting up.
Your Mi 9 will boot, and you will need to either perform/skip the initial setup stuff. Once ready, power off your device in order to flash TWRP.
Press both the volume down key and power key to boot into Fastboot Mode.
Once in Fastboot Mode, use the following command to install TWRP: “fastboot flash recovery XXXX” (XXXX = the pathway to your TWRP.img file). However, I find it best using Minimal ADB and copying the TWRP file and renaming it to “twrp.img” for ease) in the Minimal ADB folder location e.g. “C:\Program Files (x86)\Minimal ADB and Fastboot”.
Once flashed, disconnect the USB cable and boot to TWRP recovery by holding down both the volume up and the power buttons. This sometimes will bring you to the stock recovery and NOT TWRP! If it does, boot back to Fastboot and reflash TWRP.
Once you can boot to TWRP, push both the rom and magisk via CMD line:
adb push rom.zip /tmp/
adb push magisk.zip /tmp/
For ease, I suggest copying both files to the Minimal ADB folder location e.g. “C:\Program Files (x86)\Minimal ADB and Fastboot”. And renaming them to: “rom.zip” and “magisk.zip”.
This step is very important!! You must go to the Wipe menu and select: Format Data, then type “yes” to continue and then: do a Factory reset, which also wipes: Data, Caches and Format Data. If you skip this step you won’t be able to install a lot of important apps and will have to start over.
Now that you have pushed both the rom & magisk and wiped everything you needed to. Install the ROM immediately after install magisk.zip (in that order) both located in /tmp/.
The installation will take a couple of minutes (if your screen dims, don’t worry that’s just TWRP screen dimming, touch the screen to keep it awake!) once finished with no errors, then reboot and chose Do Not Install the TWRP app when prompted.
The phone will take a few seconds to reboot and show the first MI splash screen, but it should start booting. After a couple of minutes, you should see the initial boot screen! Perform the setup (connecting to Wi-Fi, adding my Google account etc.).
Once finished setting up, you may notice that magisk was not installed, if that happens, you can install the APK version and follow the prompts and reboot.
Once rebooted, confirm that magisk is now installed. If it is, I suggest installing SafetyNet and confirming your phone passes!
If it passes, you have successfully installed and rooted the Xiaomi.eu rom!
Also, when updating with each weekly I recommend the below as an alternative to using the built in Updater app. The reason being is I believe the updater app automatically reboots after it installs, which if you're rooted means you'll lose it. That then means you have to reboot back to twrp, reflash magisk, reboot, reinstall modules, reboot again etc.
Therefore to update a weekly:
Download the rom manually
Reboot to twrp
Wipe system and caches
Flash the rom and magisk
Reboot
Optional: I also disable my substratum theme too before updating and reapply afterwards. Whether it's needed or not I'm not too sure, so give it a try either way
Awesome, all files at the ready! BTW get the latest MIUI from HERE or HERE.
Make sure you download the xiaomi.eu_multi_MI9_xxx.zip.
The Dutchman said:
Awesome, all files at the ready! BTW get the latest MIUI from HERE or HERE.
Make sure you download the xiaomi.eu_multi_MI9_xxx.zip.
Click to expand...
Click to collapse
Thanks, first post updated!
cd993 said:
Thanks, first post updated!
Click to expand...
Click to collapse
You have used the Magisk Canary build I presume?
And great job for writing it down.... Now I remember the same culprits I had of flashing TWRP. [emoji23]
*justintime* said:
You have used the Magisk Canary build I presume?
And great job for writing it down.... Now I remember the same culprits I had of flashing TWRP. [emoji23]
Click to expand...
Click to collapse
That's right:
Magisk-v18.2-51110866(18116).zip
If I can find the link (of if someone can link me to it) I'll update the posy
cd993 said:
That's right:
Magisk-v18.2-51110866(18116).zip
If I can find the link (of if someone can link me to it) I'll update the posy
Click to expand...
Click to collapse
Here ya go.
https://forum.xda-developers.com/apps/magisk/dev-magisk-canary-channel-bleeding-edge-t3839337
*justintime* said:
Here ya go.
https://forum.xda-developers.com/apps/magisk/dev-magisk-canary-channel-bleeding-edge-t3839337
Click to expand...
Click to collapse
Thanks, updated!
Rommco05 said:
Good stuff for early roots without not tested stuff like twrp and magisk but I would hide that middle part coz some people can get be confused. Or make a short version which working in order and another with your all step's but separately
edit: still 46h left
Click to expand...
Click to collapse
Yeah I agree it's kinda overkill, being a a full run down - when I get time I'll make a shorter condensed version
Thanks for the detailed write up. The EU roms are google approved correct? Does the side Ai button work with google assist? Do you need to install twrp to flash or can I just flash global/EU rom if I don't want to root yet?
I just got the bootloader unlocked (1h before than I tought ahahah). I had some issue that the unlocker was telling to me thaat I didn't use enought the phone and that so I had to try in few days I overtook the problem using an old version of the unlocker (2.3.803.10).
Reading your procedure it all logical and fine, thanks! Except one thing that I'm not sure... Is xiaomi.eu a 'full rom' (on all Xiaomi that I had I always jumped straight to something different than MIUI and so I never tried it ahahah )?
If so, I think it would be better to wipe the system too before installing the rom. That's because doing so it will do 100% 'clean' installation and not a an update on the normal global miui
perryano said:
Thanks for the detailed write up. The EU roms are google approved correct? Does the side Ai button work with google assist? Do you need to install twrp to flash or can I just flash global/EU rom if I don't want to root yet?
Click to expand...
Click to collapse
Hmm unsure about them being approved or not... The side button does work. As far as I understand, you'll need to install twrp in order to flash the new rom, but could always go back to stock recovery and of course no need to root if you don't want to
mr-mauro said:
I just got the bootloader unlocked (1h before than I tought ahahah). I had some issue that the unlocker was telling to me thaat I didn't use enought the phone and that so I had to try in few days I overtook the problem using an old version of the unlocker (2.3.803.10).
Reading your procedure it is more or less everything fine except one thing that I'm not sure. is xiaomi.eu a full rom? If so, I think it would be better to wipe the system too before installing the rom because instead it will try to to an update on the normal global miui rather than a 100% 'clean' installarion
Click to expand...
Click to collapse
That's a fair point - if you have some this successfully then perhaps I'll amend my post. Sometime soon I'll make a small set of instructions, rather than my essay
cd993 said:
That's a fair point - if you have some this successfully then perhaps I'll amend my post. Sometime soon I'll make a small set of instructions, rather than my essay
Click to expand...
Click to collapse
aahahha, yes, it looks like an essay. I'm trying it now... If it fail I'll scream ahahaha
mr-mauro said:
aahahha, yes, it looks like an essay. I'm trying it now... If it fail I'll scream ahahaha
Click to expand...
Click to collapse
Let us know
cd993 said:
Let us know
Click to expand...
Click to collapse
It just boot So, it is fine I just noticed TickTock as a default app installed by Xiaomi.eu
P.S. FYI I noticed that the devices is seen by Google as a Mi Mix 2S
mr-mauro said:
It just boot So, it is fine I just noticed TickTock as a default app installed by Xiaomi.eu
Click to expand...
Click to collapse
Great!
Ahh I did see 1 random app. But then I debloated a went away
cd993 said:
Great!
Ahh I did see 1 random app. But then I debloated a went away
Click to expand...
Click to collapse
Luckily in those two waiting-weeks I had time to test all the debloat that I wanted to come with a stable configuration today It's just a pity that we can't get rid completely of the Security app It is integrated too much in the system!
One quick question for who has installed Xiaomi EU with Magisk: does it pass SafetyNet to you? (to me no )
cd993 said:
Hmm unsure about them being approved or not... The side button does work. As far as I understand, you'll need to install twrp in order to flash the new rom, but could always go back to stock recovery and of course no need to root if you don't want to
Click to expand...
Click to collapse
So once bootloader is unlocked I can install TWRP and flash the EU rom without rooting?
mr-mauro said:
It just boot So, it is fine I just noticed TickTock as a default app installed by Xiaomi.eu
P.S. FYI I noticed that the devices is seen by Google as a Mi Mix 2S
Click to expand...
Click to collapse
Yeah, to change the device name back to mi 9, just install "Find my device" app from Google play store, sign in with google account, there's an option in the setting to rename the device (this device).
That's the only place you can change the name back, I did try all, but only this one worked.
<removed>
I think Moto Moto don't like us
Command should be "dd if=/dev/block/mmcblk0p40 of=/external_sd/boot.img" then, and don't forget to mount micro sd in twrp first.
Ofc it works fine to execute command from adb shell when booted to twrp, which makes it a bit easier to type.
When I try to boot from patched image, phone is stuck on 'Android One' logo.
I'm on firmware version OPENEU_9.0_PPK29.68-16-21. I guess this firmware version isn't rootable .
Well, I'll wait for some custom ROM to enjoy rooted phone (maybe that Ressurection Remix ROM which was announced few days ago) .
gregory678 said:
When I try to boot from patched image, phone is stuck on 'Android One' logo.
I'm on firmware version OPENEU_9.0_PPK29.68-16-21. I guess this firmware version isn't rootable .
Well, I'll wait for some custom ROM to enjoy rooted phone (maybe that Ressurection Remix ROM which was announced few days ago) .
Click to expand...
Click to collapse
Propably you patch wrong boot image, try to extract from your device stock
tys0n said:
Command should be "dd if=/dev/block/mmcblk0p40 of=/external_sd/boot.img" then, and don't forget to mount micro sd in twrp first.
Ofc it works fine to execute command from adb shell when booted to twrp, which makes it a bit easier to type.
Click to expand...
Click to collapse
It's not universal path so i BOLD the path to change
[email protected] said:
It's not universal path so i BOLD the path to change
Click to expand...
Click to collapse
That's understood, but if you're booted to twrp, then "of=/external_sd/boot.img"" is pretty much your only option since internal is encrypted.
tys0n said:
That's understood, but if you're booted to twrp, then "of=/external_sd/boot.img"" is pretty much your only option since internal is encrypted.
Click to expand...
Click to collapse
Edited
[email protected] said:
Propably you patch wrong boot image, try to extract from your device stock
Click to expand...
Click to collapse
That didn't help as well. Now I'm sure that only some custom ROM will be my way to enjoy root. I will not flash any other stock ROM, I'm not that desperate (I'm also a bit afraid of doing so) .
gregory678 said:
That didn't help as well. Now I'm sure that only some custom ROM will be my way to enjoy root. I will not flash any other stock ROM, I'm not that desperate (I'm also a bit afraid of doing so) .
Click to expand...
Click to collapse
Okay, contact me on Telegram @Zmianek, and be a Tester of RessuectionRemix ! I always need to wait till the weekend with tests that slow's down development speed
gregory678 said:
That didn't help as well. Now I'm sure that only some custom ROM will be my way to enjoy root. I will not flash any other stock ROM, I'm not that desperate (I'm also a bit afraid of doing so) .
Click to expand...
Click to collapse
It should work. I've patched boot after every update without problems.
XT1941-4
Sent from my moto one
[email protected] said:
Okay, contact me on Telegram @Zmianek, and be a Tester of RessuectionRemix ! I always need to wait till the weekend with tests that slow's down development speed
Click to expand...
Click to collapse
I would like to, but is there some way of backing up stock ROM? I know that current version of TWRP has some issues with /data partition, that's why I ask .
And what about installing this ROM? Would I need to use that TWRP we have now? Is it safe?
tys0n said:
It should work. I've patched boot after every update without problems.
XT1941-4
Click to expand...
Click to collapse
Well, you have different software channel, I think that's the only reason why it works for you and it doesn't work for me . OPENEU seems to be bulletproof. (I have XT1941-4 too)
Someone correct me if I'm wrong, maybe for someone with OPENEU it does work.
I Request close due to failures
Hello!
Please forgive me as it's been a long time since I made/posted a stock based ROM as I have been mainly doing security research and dealing more with source code last few years.
Most seasoned Samsung users on here probably already know me and work that I have done so I won't waste time posting any "about me" stuff.
DISCLAIMER:
This ROM is still WIP (although fully functional) and based on Android R Beta 1ZTJA for G986U/U1/W. An unlocked BL is required to flash this ROM!
Features:
- Based on Stock R Beta 3 Build aka 1ZTJA.
- This is a full ODIN flashable tar (got tired of messing with update zips.)
- Disabled vbmeta
- Pretty heavily debloated
- Deknoxed
- Removed pesky recovery-from-boot.p which could cause boot loops.
- Currently only has SPR csc mods (will mod others in next build)
*Native call recording
*App Lock (forgot to push the app though so will fix in next build)
*Few others.. will post more specifics and give creds since I used the csc mod for exynos as a basis..
- Probably forgetting something but thhis is an initial build so will add more as time goes..
Instructions:
Note: The zip contains an instructions.txt that is more detailed.
Note 2: Zip contains the full firmware tar file which includes everything to be fully updated/on ztja. This means all bl files, modem, boot, recovery, super etc. so you can start from and build. Zip also contains files and instructions on how to obtain root.
- Backup your data if you must since this will wipe device!
- Put phone in dl mode and extract zip to pc somewhere.
- Open ODIN (INCLUDED IN ZIP) and in AP slot navigate to SamPWND.R3.v1-G986U1.tar and flash it.
- Device will reboot into stock ZTJA recovery where you will wipe data and reboot.
- Set up device and win?
Root Steps (optional):
Note: Since theres no sources for R yet theres no custom recovery. Also, Q based recovery will not work on R bootloaders as well as R there is no more /sbin so root needs to be flashed at this time.
- After you have flashed rom and everything is set up reboot back into DL mode.
- Open included ODIN and in AP slot navigate to the 1BTIF_BL_Files_and_LOS_Recovery.tar. Make sure auto reboot is NOT selected. Flash it.
- Once thats flashed hold vol down and power until screen turns off then immediately hold vol up and power until LOS recovery loads.
- However you want to flash magisk (I included Magisk.v21.0.zip) flash it.
* I do adb push magisk.zip /... Then select Install Update then install from root and select magisk zip...
- Reboot back into DL mode.
- In ODIn, select AP slot then navigate to 1ZTJA_BL_Files_and_1ZTJA_Stock_Recovery.tar and flash it.
- Device will boot back into ROM and you will now be rooted!
***TWRP RECOVERY***
- Download listed below
- I suggest you follow all the steps above and make sure it's up and running before installing TWRP.
- Basically extract the .tar from the .gz archive and flash in ODIN!
- adb works
- file manager and other tools work
- If follow above steps first as recommended, data will be decrypted.
- mounts work
- flashing works
- backup/restore works
- no issues found so far?
Steps are really quite simple if you have ever used ODIN.
It took a bit to put this together since all we have are update zips so I had to do a bit of trickery as well as had to build some binaries/tools to manually patch from 1BTIF to 1ZTJ3 to 1ZTJA to be able to have all the firmware images.
I will create a Telegram ROM support group soon where you can ask all the questions you want there (I am not at liberty to discuss unlocking bootloader on XDA so questions about this on here will either be ignored or will say I cant discuss. More info as to why will be posted in the support group or you can read the imcluded instructions.txt wink.wink).
ENJOY!
Shout Outs:
@topjohnwu for Magisk of course
@jesec for LOS Recovery
@afaneh92 base TWRP
@Mentalmuso for direction on how to get TWRP to work on R!
More shout outs coming soon!
SamPWND ROM Support and Other Support Telegram Group CLICK HERE
Downloads will be in post 2.
SamPWND.R3.v1-G986U1.tar
G986U/U1 1ZTJA TWRP Recovery
SamPWND ROM Support and Other Support Telegram Group CLICK HERE
CHANGELOG and Other Updates:
10/31/2020 - Added Telegram ROM Support group link to OP and second post as well as cleaned posts up a bit
10/19/2020 - Initial Upload/Post Creation
elliwigy said:
SamPWND.R3.v1-G986U1.tar
https://drive.google.com/file/d/1cm5H-GEEENQAhK0DnKGMjjZWnyONVXCm/view?usp=drivesdk
Click to expand...
Click to collapse
Nice, I'm going to give this a try in a little while.
Misterxtc said:
Nice, I'm going to give this a try in a little while.
Click to expand...
Click to collapse
feel free to use it as a base to work ur rom magic lol! u kno how my roms are.. bare bones lol
elliwigy said:
feel free to use it as a base to work ur rom magic lol! u kno how my roms are.. bare bones lol
Click to expand...
Click to collapse
Thanks, that will be a big help getting me back into building roms again. I haven't had the time at all lately except for some minor phone stuff plus I'm waiting for computer parts to come in and put together a 10th gen Intel system. Then I can get started again.
I can flash this on g9860 device?Great work!
Verstuurd vanaf mijn SM-G9860 met Tapatalk
[email protected] said:
I can flash this on g9860 device?Great work!
Verstuurd vanaf mijn SM-G9860 met Tapatalk
Click to expand...
Click to collapse
dunno.. i wouldnt try it tho.. not sure how g986u bl files will work on a g9860.. might hard brick
Great work. Good to have more choices
so this will work on G988U too?
Smartphones13 said:
so this will work on G988U too?
Click to expand...
Click to collapse
no
it clearly states its for G986U/U1/W if anyone tries it or flashes it to any other device then dont complain if it doesnt work or bricks phone
That being said, how do we get this going for the 988U1? I have root working for R on the 988U1. Although attempting to boot into stock recovery on ZTJA sends it into a boot loop still working on that.
Zavon said:
That being said, how do we get this going for the 988U1? I have root working for R on the 988U1. Although attempting to boot into stock recovery on ZTJA sends it into a boot loop still working on that.
Click to expand...
Click to collapse
i have toake rom for g988u/u1..
and thats bcuz it needs to pull recovery from boot which it xan only do on stock boot.img
Just flashed this last night, seems to be running beautifully, no issues so far, battery is looking good. Removed a dozen more useless apps, root is working great.
Running on a G986W with a Canadian Sim, everything seems to be working fine with my carrier (WiFi calling, LTE+...)
Thanks brother! Keep up the good work
elliwigy said:
no
it clearly states its for G986U/U1/W if anyone tries it or flashes it to any other device then dont complain if it doesnt work or bricks phone
Click to expand...
Click to collapse
I have sm-G986U1 American version will it work or na?
Franzferdinan51 said:
I have sm-G986U1 American version will it work or na?
Click to expand...
Click to collapse
is ur bl unlocked? if not then no.. if it is then yes
Now that the FE has TWRP, any idea if these will work on that?
elliwigy said:
is ur bl unlocked? if not then no.. if it is then yes
Click to expand...
Click to collapse
How do you unlock the BL for the US Variant SM-G981x (S20 5G), is it possible
Superguy said:
Now that the FE has TWRP, any idea if these will work on that?
Click to expand...
Click to collapse
as i stated already a few times the answer is no.. this is for g986u/u1. the rom has g986u/u1 bootloaders and everything.. its not a twrp flashable zip.. if u try and hard brick thats on you.
illiterateBuffoon said:
How do you unlock the BL for the US Variant SM-G981x (S20 5G), is it possible
Click to expand...
Click to collapse
its not allowed to b posted on xda since its a paid service.. if u look around ull be able to find ur way