Does anyone know how to modif the IPAQ 3600->3800 series adapter, made by Think Outside (or Targus), to work as an IPAQ 3600 --> XDA adapter? The ribbon cable has only 4 wires. Is it possible to adjust the wiring in the ribbon cable, or is it necessary to rewire the connectors? Can anyone figure this out?
Related
¿Do you know if the MiniUsb to headphone connector on the Herald is a standard??
I've been looking for an adapter and I've found some Motorola Headphones that connect through mini USB interfase, but don't know if it's goin' to work on my Herald.
¿Can anyone help me?
Thnx in advance
my razor (motorola) headphones do not work on my herald, however, you can check ebay for a usb to headphone converter for the wing or herald, i have one and it works fine.
this might be a big bump, but this is why it wont work.
HTC devices use something called extUSB, which, evidently, is miniusb but better i guess. You will want to ebay search for that,
on ebay.. search term "wing" choose cellphone accessories>> headsets-corded>> u will get some... most are 1.99 with 4.99 shipping (us dollars)
http://www.daydeal.com/product.php?productid=15366
exactly what u need
daydeal.com -= thye got some good stuff on there lol
This one works well for me:
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=776
I plug it into the usb audio/power adapter that came with my Wing, then plug the car power adapter into the adapter, and a Belkin 3.5 to stereo RCA cord into my Pioneer receiver... Charge my Wing as I drive while MortPlayer entertains me
Slightly old thread, but I figure it's worth clarifying this a little.
The Harold and Wing's connector has extra pins which provide analog input and output from the headset. I don't believe it uses any of the USB side's pins.
The adapter above will work for conventional headphones. I don't know of any adapters for MOT's miniUSB connector headsets (I highly doubt you'll ever see one) or even a full 2.5mm headset (although that shouldn't be hard to fabricate).
Anyone ever seen one?
I have the HTC YC A300 connector in order to play music through the car Aux-in cable and charge at the same time, but it means 2 leads trailing through the car. I would like to have a single lead between the Touch Pro 2 and the YC A300 connector (hidden in the centre armrest).
I bought a mini-USB extension lead, but it doesn't fit as its not 11 pin.
I've tried searching the net but no joy - anyone else found anything suitable?
I've also considered the 3 in 1 USB adaptor - but I assume that will have the same issue (needing 11 pin cable).
Cheers,
Jim
Enhanced Mini USB extension
Nee them also.
But its to connect my S3LTE (with Otter-Case) to my docking Station.
Its not possible with the Otter Case.
Can anyone tell me if I can replace the power connector with a mini usb type? The xda2 works well apart from that and want to have a go.
I have a female mini usb connector and time..... not usre about the skils, just need a bit of advice on pinouts/where i should solder.
TIA
I will be using my GT 7.7 allot in the car and likely in the landscape orientation. This puts the 30pin connector and cable sticking straight out the side.
Is there any 90 degree ("L" shaped) 30pin connectors available? (similar to a "L" shaped SATA connectors -see picture-)
If there is, this would point the cable towards the dashboard and and make the cable routing less messy looking.
I searched but didn't come up with anything.
Note: I know I could use the Samsung OEM car dock (which, I think, has the power cable connector in the back/bottom) but was looking for a lower cost option.
Thank
Any luck with finding one of these cables?
Neogrin said:
I will be using my GT 7.7 allot in the car and likely in the landscape orientation. This puts the 30pin connector and cable sticking straight out the side.
Is there any 90 degree ("L" shaped) 30pin connectors available? (similar to a "L" shaped SATA connectors -see picture-)
If there is, this would point the cable towards the dashboard and and make the cable routing less messy looking.
I searched but didn't come up with anything.
Note: I know I could use the Samsung OEM car dock (which, I think, has the power cable connector in the back/bottom) but was looking for a lower cost option.
Thank
Click to expand...
Click to collapse
Have you had a look at my cheap solution for car a car dock and cable management yet?
I know this was posted awhile ago, but if you or anyone else is interested, the original samsung galaxy tab HDMI dock uses the same connector and works w/ the 7.7 (I know because i have a couple). You can get these on amazon for $15 right now. I believe this is the same dock for all the tabs and they just change the plastic piece that holds your tablet to accomodate the model (i have the original galaxy tab, the 7 Plus, and the 7.7 and they ALL work).
If you take it apart, the tablet connector looks exactly like what you are looking for - an L shaped 30-pin. The profile when plugged in is very thin and looks less like when you have the actual car charger cable plugged directly into the tablet.
I've attached a picture of what the cable end looks like. The nice thing is if you keep all the electronics intact, there is an area in the back that the car charger cable connects to pass power to this cable as well as a 3.5 jack for your auxiliary audio connector. Once you lop off the plastic tablet holder part, you have a bare ribbon cable that you can cover in black electrical tape and you just have to mount the pod onto the back of a hard tablet mount and plug your power and auxiliary audio cable into it.
Dear rEVOLVE
i liked your idea the most and i already ordered the dock, but i have a question, my ordered dock has HDMI output as well, so can i do some electronic modification Like this DIY USB OTG cable to connect USB hub to it in the same time as well, so finally i got i charging 30pin port, auxiliary 3.5 audio port, HDMI port, and USB port???
thank you
hi
I need some of help with power plug for galaxy tab
look at this http://forums.whirlpool.net.au/forum-replies.cfm?t=1931227&p=-1&#bottom
anybody got any ideas?
Hi All,
So I've spend the best part of the weekend trying to find a wiring diagram for the cable for the TF101.. one of my delightful kids pulled on the wire to disconnect it from the adapter, and left the actual usb plug behind - so I now have a cable with 6 wires exposed, and a seperate (and mangled) usb plug.
I've ordered a new cable - but urgently need to charge my TF101 today... does anyone know where I can find a wiring diagram so I can connect the wires direct to a 12v adapter - or know which of the wires in the cable are + and - ?
many thanks in advance
Nick