Hello everybody,
I try to connect the MDA with a serial device like Cisco Router or simply an PC with Terminal emulation . I made a cable which connects PIN 8 with RX (on the other device) PIN 10 with TX on other device and PIN 19 with GND; Then I opened a Terminal programm called "Term force" with Properties (9600,8,n,1,Serial 1) on MDA.
But nothing happened !! At least, it should be possibly to send a string to the PC with "Hyper Terminal" opened.
Could anybody tell me which mistake I do !
Related
I am considering purchasing the T-Mobile Pocket PC Phone. I need the ability to connect a wireless device to my laptop while I travel. Can I connect the T-Mobile pocket pc phone to my laptop? If so, do I need a cable for that or can I do it via IR?
Thanks,
Brian
Wireless modem on XDA is serial cable or irda. Be sure to disable activesync before and connect your phone to laptop before pushing the "start", button.
So will W2K automatically detect it as a modem?
Well, actually not really. Regarding the infra red connection, I had to install first a virtual infra red port (http://www.cyber-mill.com/irdaw2k.zip), and then install on it the standard 33.6 Modem.
If you want, I can post how to do this, step by step, and it works.
Tekflow said:
Well, actually not really. Regarding the infra red connection, I had to install first a virtual infra red port (http://www.cyber-mill.com/irdaw2k.zip), and then install on it the standard 33.6 Modem.
If you want, I can post how to do this, step by step, and it works.
Click to expand...
Click to collapse
That would be awesome if you would do that.
Thanks!
Brian
http://xda-developers.com/phpBB/viewtopic.php?t=2643&highlight=modem
in this thread there is an url to a pdf which explane how you do it step by step
USING XDA AS A MODEM
example for GPRS connection
Before installation, note carefully (for your GPRS connection):
The access point name of your network provider
Your username and password
PS: if you don't know the access point name, open -on your device- settings/connections/internet settings
press on modify... then press on your GPRS connection
press on next: you will see the access point name.
Preliminary step: for infrared use only (skip for serial connection)
unzip irdaw2k (download from: http://www.cyber-mill.com/irdaw2k.zip)
click on setup, wait till end of installation
open your pc control panel/system/hardware/device manager
Click on ports and note on what port the infrared virtual com is installed (example: com5)
Step one: installing modem
open control panel/phone and modem options
choose modems tab. click add...
check don't detect modem
select from standard modem types: standard 33600bps
click next. install on selected port (com5 in this example)
after end of installation, click on properties for the modem
on tab Modem, confirm maximum speed 115200
on advanced, extra initialization type: AT+CGDCONT=1,"IP","xxx","",0,0
where xxx is the access point name of your network provider
select change default preferences
change flow control to none
clik OK to finish
Step two: setup the network
In control panel/network connections/ select file/new connection
select connect the internet, then manual setup
choose connect using modem. confirm the standard 33600bps
Give a name to the ISP
Choose: *99# as phone number.
write your username and password
do not use dialing rules
Step three: using XDA
Make sure activesync is disabled
Once connected through serial port or facing IR
Open wireless modem. choose connection (serial or IR)
click on start
wait for confirmation of connection on PC
Start dial-up from PC
ps: during this time, GSM phone line is disconnected
It reconnects automatically after disconnecting the modem
here i am for another helping question , eheh sorry about that i'm quite newbie at PDA
i have a problem with activesync , it seems that now connect to the PDA only as GUEST and i can't update any info
how to reset that type of connection ?
If it is connected as guest, just reinsert your device into the cradle. The active sync window will appear and ask you for the type of connection....
HTH
Stefan
unfortunately not , it seems that everytime i connect it to the cradle , activesync connect it only as guest. It's weird because i didn't choose first time the guest account ...
Why do you think, your device ic connected as guest?
Have you checked yiur sync settings of active sync?
Stefan
thanks for the reply lumpistefan
i found a workaround , with the activesync open , without the XDA insterted in the cradle , i removed every partnership and recreated
Problems deleting partnership name
Think I found the answer at
http://www.bevhoward.com/ASync.htm#Reuse
I did a file search using the device name and deleted all of those and bingo I could use the name again !!
Hi guys,
I want to connect to activesync on my pc.
The problem is i only have COM6 & COM7 available on my S200,
so I assign the COM6 in Activesync but can't select COM6 in my Bluetooth
utility.
When trying to synch the S200 is giving me cannot find an existing bluetooth partnership with a pc that supports activesync.
Am i'm doing something wrong here?
any help is appreciated
cheers
koenie said:
Hi guys,
I want to connect to activesync on my pc.
The problem is i only have COM6 & COM7 available on my S200,
so I assign the COM6 in Activesync but can't select COM6 in my Bluetooth
utility.
When trying to synch the S200 is giving me cannot find an existing bluetooth partnership with a pc that supports activesync.
Am i'm doing something wrong here?
any help is appreciated
cheers
Click to expand...
Click to collapse
My problem is same to you ,
Any one can help?
leeleeguo said:
My problem is same to you ,
Any one can help?
Click to expand...
Click to collapse
which bluetooth stack are you using?
toshiba?
gokhanmoral said:
which bluetooth stack are you using?
toshiba?
Click to expand...
Click to collapse
Thanks!
My PC is Dell M1210,and the bluetooth module is Dell wireless 355 Module
with Bluetooth 2.0+EDR Technology
leeleeguo said:
Thanks!
My PC is Dell M1210,and the bluetooth module is Dell wireless 355 Module
with Bluetooth 2.0+EDR Technology
Click to expand...
Click to collapse
generally, the incoming serial port for the pc over bluetooth is COM7.
however, sometimes it is not available to select in activesync or wmdc(for vista).
you can try to set it manually. try the followings:
- if your PC and phone is already bound over bluetooth, delete the relationship.
- start -> run -> regedit (enter)
- go to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services
- you will see a REG_SZ (string) value named as "SerialPort". change it to COM7
- reboot the PC. try to bind over bluetooth again. this time you should see "ActiveSync Service" not "Serial Port" during the binding process. start the binding process from your phone, not from the PC.
if the incoming serial port is different than COM7, then use it. I am sure there is something in the control panel to let you add/delete/modify that setting. check it before starting.
good luck.
gokhanmoral said:
generally, the incoming serial port for the pc over bluetooth is COM7.
however, sometimes it is not available to select in activesync or wmdc(for vista).
you can try to set it manually. try the followings:
- if your PC and phone is already bound over bluetooth, delete the relationship.
- start -> run -> regedit (enter)
- go to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services
- you will see a REG_SZ (string) value named as "SerialPort". change it to COM7
- reboot the PC. try to bind over bluetooth again. this time you should see "ActiveSync Service" not "Serial Port" during the binding process. start the binding process from your phone, not from the PC.
if the incoming serial port is different than COM7, then use it. I am sure there is something in the control panel to let you add/delete/modify that setting. check it before starting.
good luck.
Click to expand...
Click to collapse
It's ok,also need to del the unused serial port
Thank you
Hello
I've managed to select the incoming port in Activesync to COM6
and set the outgoing port on my S200 to COM6
but the pda is reporting that he doesn't find a computer that supports Activesync, although they are paired
I'm using the Widcomm stack
the widcomm program is reporting these 3 services are available on the pda:
- Connect NPA & Dialup & voice Gateway, serial port is not one of them
Hi,
Can someone point me in the right direction please?!
I am trying to connect to an industrial product using Android over Bluetooth. The device does not support pairing. I have written an application in WM6.5 and that works fine.
The sequence of events is:
Discover device and establish a Bluetooth Serial connection (the device does not support passkeys/pairing).
Request a key from the product (by sending a hex string)
Read string and send back a response based on the key and a user entered password (by responding with another hex string).
Is there an example anywhere that I can download?
I have downloaded some BT serial terminal emulators but they all want to pair with the device.
In Windows 7 you can simply search, connect and choose to connect without pairing and then the device appear as a BT serial port.
Thanks in advance.
I have a Smartphone Xiaomi Redmi Note 6 Pro. This can not share it's Internet connection with my PC (a Widnwos 10 and another Windows 8.1) or with other devices, by USB connection.
When USB Thetering is enabled in the Smartphone, it connects with the PC, but the PC can not access the Internet indicating or following: "No Internet Access".
Attached Smartphone Specs, SimCard and APN parameters.
The BUG
When USB Thetering is enabled on the Smartphone, it connects with my PC, but the PC can not access the Internet indicating or following:
'NO INTERNET ACCESS'
What troubleshout procedures were done:
1. The NDIS driver was changed to the Microsoft standard:
The problem was not solved.
2. Using ADB commands, changed the "tether_dun_required" parameter that was null to 0
global settings tether_dun_required 0
The problem was not solved either
3. The same Simcard installed in my old HTC 9 T-Mobile USA unlocked, shares its Internet connection with the same APN parameters to the same PCs (Windows 8.1 and Windows 10), The same with my Unlocked Samsung A4 tablet.
4. Same bug sharing Internet via WiFi Hotspot. "No Internet Access" message in PC.
"Xiaomi Support" has not indicated how to solve this bug
Please, can anyone help me with this?
Regards