I have a T-Mobile. I answered a call last weekand hung up the phone when I was finished. The following morning, I tried to power the unit up and nothing happened . I did a soft and hard reset, and nothing happened. I called T-Mobile and they cannot do anything for me as I am not a subscriber. Has this happened to anyone else? Is there any way to fix the unit? Anything should try? T-Mobile won't help as the original purchaser has a large outstanding balance, unpaid of course. If he was in good standing I would have a new unit delivered tomorrow, so I cannot do anything with T-mobile, so any suggestions other than that are welcome.
same problme
hi i got same problme first time it will can on but can not turn on radio few hour will not see any appication and can not connect to pc and few hour will can not turn on only on dasktop charge will on but will restart see only T-MOBILE
if anyone have solution please help me also
Does anybody know of anywhere in Canada preferrably or the US that does repairs on these units? I'm getting desperate at the moment missing my wonderfull unit.
Related
Hi there,
this morning my phone didn't charge anymore....
I tried lots of things, many cables and cradles but still I don't get an Orange light when I put the cable in it, does anyone know what I can do?? cause it's battery is VERY low and nog getting any fuller...
plz help me
h0t_Sh0t
Sounds like a blown fuse on the motherboard, do a search on this forum for details of repair procedure.
How long you had the unit?
If you, like myself, are not as technically advanced as some others, and you haven't had the phone long, send it back to whomever the manufacturer was and they will likely fix it. I bought an Siemens SX56 from ebay a couple of months ago and had the exact same problem, told me to do a hard reset first, that did nothing, then I sent it in to get fixed, apparently it was easier and cheaper for them to just send me a new unit because in about a week and half, I had one at my door. Of course, the unit I sent in was unlocked, as I use cingular and the Siemens is an ATT phone, but the new unit was locked to ATT, that's how I found this site, I had it unlocked in 5 minutes. Anyway, if you have had the phone less than 60 days, I would send it in and get it fixed.
that's one problem,
I live in the netherlands, and i bought it from my uncle who lives in Singapore....and he bought it there....
But I'll check the forum to see what I can do about it....
thnx anyway
h0t_sh0t
Dear h0t_Sh0t, I have few advices that might help..
1- Check if your device has International warrenty.
2- Check is the connector socket is loose from inside or not well connected, this is where the little thing goes inside the imate to connect. Mine got loose one month ago, and then was almost broke, then did not charge or make Sunc, I got it to be repaired at almost US $ 65.
Hope this helps.
GoldenSands said:
Dear h0t_Sh0t, I have few advices that might help..
1- Check if your device has International warrenty.
2- Check is the connector socket is loose from inside or not well connected, this is where the little thing goes inside the imate to connect. Mine got loose one month ago, and then was almost broke, then did not charge or make Sunc, I got it to be repaired at almost US $ 65.
Hope this helps.
Click to expand...
Click to collapse
i'm very sorry, but my english is not so good,
I don't really get the first advice..... (i'm very sorry, maybe a dutch guy can translate it for me(or i'll ask my brother tonight))or can someone explain it a little bit...
and do you mean by your second advice or my XDA is well connected to the cradle???(cause i can sync it with the computer, but he isn't recarging)
I'll mail some peeps who might know something to....
thnx for your help
h0t_Sh0t
hey all, my XDA II O2 is dead, i have a bit of a story to tell about it too. the poor thing won't boot up past the O2 spash screen.
i was initially selling my O2 around the traps as a working unit, then someone asked me to show them landscape view, and i didn't know how. i soon found out i needed to upgrade to 2003se or 2005. so on my homage to flashing my O2's ROM. i went and tried a 2005 and some random version radio stack hoping to upgrade two things at once, then, only one worked. my OS flash was fine, but my radio ROM didn't work at all. so basically i could get into WM2003, 2003SE, 2005 fine but couldnt use my simcard.
i've tried countless times to manually fix it aswell as using the official O2 ROM update off their site. then i went and sent it to O2 customer service or whatever it's called this year Razz. they charged me $45AUD for general service fee which included flashing the radio and OS roms up to the latest. then they ring me up one morning saying my poor O2 needs a new motherboard (somewhere between $350 - 450 i think). i asked why, they said because it wouldn't power on at all. so i tried turning it on, it didnt work all of a sudden, so to speak.
i still had to pay the $45aud and ended up without a working O2, at all.
i felt furious but helpless and tried not to have to pay the fee, but had to.
long story short, heh, i need to do something with my shell of a XDA II, either sell, sell parts, fix, find a special ROM flash that might fix it. i don't know, i've tried so hard and have gotten nowhere. so, guys, any insight in what i could/should do?? any help would be greatly appreciated. thanks! Shocked
OH OH OH also, on that note, i can't go into bootloader mode or any other mode at all, so i cant re-flash
Hi, i have gone through multiple threads on xda and google to find a solution, but could find none. finally posting out of desperation.
I had WP7 and android from SD (through MAGLDR) on my HD2. for WP7 i had upgraded the radio to 2_14_50_04. But my data and cell phone signal kept dropping in both wp7 and android. after trying a couple of other radios, i decided to go back to an old radio. So i went into bootloader and installed 2_07_51_22_2. The install was successful and thats it, the phone went dead.
No bootloader, no lights, no vibration, no hard reset/soft reset, nothing from the phone. Tried every possible combination of keys, nothing. The only glimmer of hope is that when i connect the HD2 to the computer, it recognizes a USB input and tries to install but cannot. When i plug it out, it makes the usb disconnection sound, so i am hoping there is still some life in it.
Battery was around 80%, so cannot be battery issue (tried charging it again, no luck)
Any help please anyone. I am not able to get into the bootloader, but the usb is being recognized. is there a solution from this kind of problem?
boysha8 said:
Hi, i have gone through multiple threads on xda and google to find a solution, but could find none. finally posting out of desperation.
I had WP7 and android from SD (through MAGLDR) on my HD2. for WP7 i had upgraded the radio to 2_14_50_04. But my data and cell phone signal kept dropping in both wp7 and android. after trying a couple of other radios, i decided to go back to an old radio. So i went into bootloader and installed 2_07_51_22_2. The install was successful and thats it, the phone went dead.
No bootloader, no lights, no vibration, no hard reset/soft reset, nothing from the phone. Tried every possible combination of keys, nothing. The only glimmer of hope is that when i connect the HD2 to the computer, it recognizes a USB input and tries to install but cannot. When i plug it out, it makes the usb disconnection sound, so i am hoping there is still some life in it.
Battery was around 80%, so cannot be battery issue (tried charging it again, no luck)
Any help please anyone. I am not able to get into the bootloader, but the usb is being recognized. is there a solution from this kind of problem?
Click to expand...
Click to collapse
Yep you bricked your phone. You made the mistake by flashing a .51 radio which is only for non T-mobile hd2 phone. Since you have a tmobile phone you can only flash .50 radios. Your phone now has a radio that is incompatible with it so it wont turn on. Good news is that there may be a way to unbrick it. Here is a link that may help you unbrick if you have HSPL installed which you do.
http://forum.xda-developers.com/showthread.php?t=668347#6262090
Dimension2035 said:
Yep you bricked your phone. You made the mistake by flashing a .51 radio which is only for non T-mobile hd2 phone. Since you have a tmobile phone you can only flash .50 radios. Your phone now has a radio that is incompatible with it so it wont turn on. Good news is that there may be a way to unbrick it. Here is a link that may help you unbrick if you have HSPL installed which you do.
http://forum.xda-developers.com/showthread.php?t=668347#6262090
Click to expand...
Click to collapse
Thanks dimension. But i actually tried the steps in this link. Step 11 there asks me to put device in bootloader. But I am not able to get to the bootloader screen at all. Do you know how i can do that?
You can't.
that link is no good to you, it needs the phone to be able to power on.
There is no fix other than jtag or repair center.
samsamuel said:
You can't.
that link is no good to you, it needs the phone to be able to power on.
There is no fix other than jtag or repair center.
Click to expand...
Click to collapse
You may be right, but in all hope you should still try it even tho your not able to see the boot loader screen. It may work for you because your computer detects your phone. At this point I would try anything...or cry because I can't live a day without this phone. If it does not work then send it in for repairs which would cost $100 or so, but at least you wont have to pay $250+ for another HD2.
Dimension2035 said:
You may be right, but in all hope you should still try it even tho your not able to see the boot loader screen. It may work for you because your computer detects your phone. At this point I would try anything...or cry because I can't live a day without this phone. If it does not work then send it in for repairs which would cost $100 or so, but at least you wont have to pay $250+ for another HD2.
Click to expand...
Click to collapse
i know i cant too. the last 2 days have been pretty depressing. I am now tired of seaching, can anyone point me to a thread as to how to get it repaired (i dont have a tmobile contract or insurance or warranty, so guess i will have to take it to a htc repair center or something). Any pointers would help. I am in the Atlanta, GA area.
Thanks
hd2 brick repair
you should contact the member of this forum by the name of trashcan... he is the only person in the united states that has the jtag device used to re program the hd2
boysha8 said:
i know i cant too. the last 2 days have been pretty depressing. I am now tired of seaching, can anyone point me to a thread as to how to get it repaired (i dont have a tmobile contract or insurance or warranty, so guess i will have to take it to a htc repair center or something). Any pointers would help. I am in the Atlanta, GA area.
Thanks
Click to expand...
Click to collapse
The first time whet I briked HD2 they asked 20 euro, the second time (after 4 experiments days) only 10 euro
Dimension2035 said:
Yep you bricked your phone. You made the mistake by flashing a .51 radio which is only for non T-mobile hd2 phone. Since you have a tmobile phone you can only flash .50 radios. Your phone now has a radio that is incompatible with it so it wont turn on. Good news is that there may be a way to unbrick it. Here is a link that may help you unbrick if you have HSPL installed which you do.
http://forum.xda-developers.com/showthread.php?t=668347#6262090
Click to expand...
Click to collapse
Guys, just joined the HD2 forums as I previously had a HD. Noticed this thread and checked my new HD2 T-Mobile (UK) phone and the radio is 2.07.51.22.2 which makes a mockery of your statement regarding the .50 radio, unless I am missing something (which is always possible).
Ooops, just realised that this forum is for USA phones only. Apologies.
sandymac said:
Guys, just joined the HD2 forums as I previously had a HD. Noticed this thread and checked my new HD2 T-Mobile (UK) phone and the radio is 2.07.51.22.2 which makes a mockery of your statement regarding the .50 radio, unless I am missing something (which is always possible).
Ooops, just realised that this forum is for USA phones only. Apologies.
Click to expand...
Click to collapse
yup, it can get confusing in here since they split the forums
Me 2
I made the rookie mistake of flashing the wrong rom too, careless on my part. I've contacted HTC Customer Support and put in for RMA, with fingers crossed they won't catch the flashing of illegal software. I know it's a long shot, but we'll see. Worst case scenario I pay for shipping and the $15 fee for them to diagnose my phone. I'll repost if successful.
HoochIsCrazy said:
I made the rookie mistake of flashing the wrong rom too, careless on my part. I've contacted HTC Customer Support and put in for RMA, with fingers crossed they won't catch the flashing of illegal software. I know it's a long shot, but we'll see. Worst case scenario I pay for shipping and the $15 fee for them to diagnose my phone. I'll repost if successful.
Click to expand...
Click to collapse
was it sucessful, I bricked my phone with the wrong radio too and now I'm debating wether to send it in to htc (my warranty expires in 4 days) or just use it as an expensive mirror
Hi All,
I have samsung Galaxy S2 AT&T one (SGH i777). I have been using with proper care so far now. One day suddenly my power button stopped working. As it was out of warranty , I went to local phone repair shop in San Jose, CA, USA(Which has good ratings on yelp). They fixed the problem. But at the same time my simcard was not recognizing at that moment. So I thought may be i have to take new sim. So I visited AT&T store. They did software data reset and tried with new simcard. Still my phone always shows "Please insert simcard" and at range position it shows circle with one line it.
Has anybody experienced this problem ? Will the rooting of my phone help in this case ? Please advice me . Phone is in excellent condition and as it was my first android device I dont want to throw it .
I appreciate your help.
Thanks,
Gaurav
Sounds like a hardware problem. Was this an issue prior to the repair of the power button?
Sent from my Apple IIe
I bought my s3 in March of this year, and everything was working just fine until May. It's an awsome phone and I love it. However, since May, my phone no longer connects to 4g EVER and the 3g comes and goes and never stays connected for more than 10 minutes while in use. I've NEVER even come CLOSE to reaching my plans provided 2.5GB of data, so I know that's not the issue. The phone has never been dropped, or wet, as I am always very delicate with my phones. I have never placed it too close to the TV...
I contacted Boost mobile. They gave me a long list of things to try. I have tried EVERYTHING: making sure the mobile networks is checked, preferred network setting CDMA/LTE, soft reset, clear browser cache, update PRL, profile update, software update, firmware update, ##72786#, and even did a factory reset. Nothing helped. Boost said there was nothing else they could do for me, and that I needed to contact samsung.
Samsung said the only way for them to find the problem is for me to send them my phone, and wait 2 to 4 weeks for them to revise it and send it back. That's not an option as I need my phone monday through friday for my job. (UPDATE: I got so irritated with this problem that I went ahead and bought an LG Volt, since I didn't have the money to buy another galaxy. It's nice but I don't like it as much. I'm still afraid to send the Galaxy into Samsung. They have expressed to me that if they can't find an issue(just my luck), or if they find the issue to be my fault(IE I put the phone too close to a credit card magnet or some dumb crap like that), then they will charge me not only for the parts and labor, but for the return shipping... and we all know that they'll charge me way more than the phone is worth.
I was just wondering if anyone else has had this problem, and if there's anyway to fix it without having to send my phone in to samsung? I have been told, also, that I could try reflashing the phone to it's original firmware and software, but I am afraid of screwing the phone up since I've never done anything like that before.
Thanks!