how can i reset ALL the voice counters on the xda?
Hi,
Sad to inform you that, the only way I have found out so far has been to hard reset the unit....sorry again
gb155 said:
how can i reset ALL the voice counters on the xda?
Click to expand...
Click to collapse
Even hard reset won't help with the counters that are stored in the phone. For RSU versions prior to 4.20 you could wipe them with The Manipulator, if you have a serial cable.
well thanks for your replays anyway.
XDA developer Peter Poelman said:
gb155 said:
how can i reset ALL the voice counters on the xda?
Click to expand...
Click to collapse
Even hard reset won't help with the counters that are stored in the phone. For RSU versions prior to 4.20 you could wipe them with The Manipulator, if you have a serial cable.
Click to expand...
Click to collapse
And for RSU version 4.21 what shall I do?
Thx
Gear
Related
Hi
I've unrooted my phone because I'm missing SkyGo and also couldn't get updates easily via Kies. Titanium Backup won't even show as an icon, SuperSU gives an error when starting and ROM Toolbox says root access is required. All of this would confirm to me that my phone is not rooted and in addition the phone's status is 'normal'.
So why does SkyGo still tell me my phone is rooted and it won't support rooted devices?
Also, when I connect to KIES to look for updates, why does it tell me my firmware is not supported?
I downloaded stock 4.1.2 ROM from SAMOBILE and the build number is JZO54K.I9300XXEMA1. Baseband version is I9300XXELLA.
Do I need to do anything else?
Thanks, Paul
paullong22 said:
Hi
I've unrooted my phone because I'm missing SkyGo and also couldn't get updates easily via Kies. Titanium Backup won't even show as an icon, SuperSU gives an error when starting and ROM Toolbox says root access is required. All of this would confirm to me that my phone is not rooted and in addition the phone's status is 'normal'.
So why does SkyGo still tell me my phone is rooted and it won't support rooted devices?
Also, when I connect to KIES to look for updates, why does it tell me my firmware is not supported?
I downloaded stock 4.1.2 ROM from SAMOBILE and the build number is JZO54K.I9300XXEMA1. Baseband version is I9300XXELLA.
Do I need to do anything else?
Thanks, Paul
Click to expand...
Click to collapse
Try a factory reset.
k6? said:
Try a factory reset.
Click to expand...
Click to collapse
Thanks for such a speedy response. Being a bit of a novice at all of this, will I lose any data or settings if I factory reset? Do I do this by holding down vol up, home and power or through "Back up and reset" in settings?
Thanks, Paul
you will lose all the apps and data
Glebun said:
you will lose all the apps and data
Click to expand...
Click to collapse
Ouch - not a good idea then.
Any other suggestions on my original post please?
One the Sky Go post .
Two contact Sky Go developer or forum Sky .
when I connect to KIES to look for updates, why does it tell me my firmware is not supported?
>>>
same answer as always codes match no firmware on the server .Flash stock rom via Odin if you want an update or try the identical multiple same question posts for an answer .
paullong22 said:
Ouch - not a good idea then.
Any other suggestions on my original post please?
Click to expand...
Click to collapse
A factory reset after flashing stock firmware is the only thing (if I understand correctly ) you can do.
Sent from my GT-I9300 using xda app-developers app
A friend had the same Problem
He Wiped Dalvik/Cache und fixed Permissions then it worked
Alpa Cino said:
A friend had the same Problem
He Wiped Dalvik/Cache und fixed Permissions then it worked
Click to expand...
Click to collapse
Thanks for that idea. Will I lose data?
Regarding other threads, I have searched for quite a long time looking for the information on Sky Go and Kies that I need but haven't found solutions. I might be looking in the wrong places, but no luck yet.
Paul
paullong22 said:
Thanks for that idea. Will I lose data?
NO
jje
Click to expand...
Click to collapse
It was worth a try, but wiping cache sadly didn't work.
paullong22 said:
It was worth a try, but wiping cache sadly didn't work.
Click to expand...
Click to collapse
You'll lose data but a factory reset is your only option.
Sent from my GT-I9300 using xda app-developers app
What about Skys own forum ???
jje
I suspect Sky won't help you Unfortunately.
The reason they do not allow access from rooted phones is from a security point of view. .
It is much easier on a rooted phone to find ways of recording from the app etc and sky obviously won't allow that .
So I guess your decision comes down to what is more important to you. ..
The ability to watch Sky Go?
Or the functionality and features of a rooted phone.
I personally chose the latter. ..
There are plenty of ways to skin a fish
Sent from my GT-I9300 using Tapatalk 2
android ployer tablet
k6? said:
Try a factory reset.
Click to expand...
Click to collapse
Got the same problem. downloaded root checker, OTA rootkeeper, Superuser. Displays "root: no access." Did factory reset but no change.
Downloaded SU but displays "No SU binary installed". Help pls.
Thanks, Chie
What model phone do you have this is I9300 only .
Sky go
k6? said:
Try a factory reset.
Click to expand...
Click to collapse
I cleared data and clear cache in sky go app and that works my phone was rooted
Wales51 said:
I cleared data and clear cache in sky go app and that works my phone was rooted
Click to expand...
Click to collapse
Thanks, this worked for me!
hi friends.
because nobody can help me with my other question....
this is my other question. http://forum.xda-developers.com/android/help/to-reset-please-t2816523/post54155847
Click to expand...
Click to collapse
here another question.
is there any universal rom only for do a factory reset?? i mean not for install android firmware.
or a method like this? charge a firmware, program or any software into a SD, then plug that sd in the tablet, then the software begin and show factory reset options
thanks.
:.......................:
nobody????
my english is bad??
or there is no solution to my problem??
thanks.
Hey ,I've just got a i9100 from my father , it has stock rom 4.0.3 ,unrooted of course ,but it has so many apps installed on it ,So I wanna format it and then Factory reset it.
The thing is after doing some research I read that doing Factory reset kills the internal memory ,and leads to soft ,or hard brick.
Does this only happen when I reset from recovery ? or even when resetting from the settings menu?
And If it's so ,How can I reset it without changing the rom ,or rooting? cuz I don't intend to root it for a while.
Thanks in advance
Somor said:
Hey ,I've just got a i9100 from my father , it has stock rom 4.0.3 ,unrooted of course ,but it has so many apps installed on it ,So I wanna format it and then Factory reset it.
The thing is after doing some research I read that doing Factory reset kills the internal memory ,and leads to soft ,or hard brick.
Does this only happen when I reset from recovery ? or even when resetting from the settings menu?
And If it's so ,How can I reset it without changing the rom ,or rooting? cuz I don't intend to root it for a while.
Thanks in advance
Click to expand...
Click to collapse
Hmm hard to say, can't find any advice about that on google. For me it looks like full wipe shouldn't be done.
You can download emmc brick bug check from play store first and test if you have this bug. If no I guess you can flash.
If yes I'd suggest you to flash another kernel anyway, for safety reasons, later you can deactivate super user rights
Rooting can possibly easy be done with framaroot here on xda.
Good luck :thumbup:
Sent from my GT-I9100 using XDA Free mobile app
thanks for your quick reply ,but can I just select factory reset from settings ,Not from The recovery? Or will it brick the phone too?
Somor said:
thanks for your quick reply ,but can I just select factory reset from settings ,Not from The recovery? Or will it brick the phone too?
Click to expand...
Click to collapse
Sry I really have no idea, i searched exactly for that and just find somebody asking it in a thread but the question got ignored... ( rootgalaxynote.com/galaxy-note-recovery/how-to-avoid-the-emmc-brick-and-installrestore-roms-on-galaxy-note-gt-n7000/ )
I really wouldn't try if I were you
Sent from my GT-I9100 using XDA Free mobile app
Muthzer the One said:
Sry I really have no idea, i searched exactly for that and just find somebody asking it in a thread but the question got ignored... ( rootgalaxynote.com/galaxy-note-recovery/how-to-avoid-the-emmc-brick-and-installrestore-roms-on-galaxy-note-gt-n7000/ )
I really wouldn't try if I were you
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
I downloaded the app and it says it is a sane chip (good) ,but the exynos bug check app says the device is affected by the bug !!
what app shall I believe ?
Somor said:
I downloaded the app and it says it is a sane chip (good) ,but the exynos bug check app says the device is affected by the bug !!
what app shall I believe ?
Click to expand...
Click to collapse
Both
Well I don't know, I'll search some more on google and see if I can find something. I'll tell u when finding something.
Till then you'd avoid resetting till we have more information.
Maybe somebody else knows more and will reply soon.
Sent from my GT-I9100 using XDA Free mobile app
Somor said:
Hey ,I've just got a i9100 from my father , it has stock rom 4.0.3 ,unrooted of course ,but it has so many apps installed on it ,So I wanna format it and then Factory reset it.
The thing is after doing some research I read that doing Factory reset kills the internal memory ,and leads to soft ,or hard brick.
Does this only happen when I reset from recovery ? or even when resetting from the settings menu?
And If it's so ,How can I reset it without changing the rom ,or rooting? cuz I don't intend to root it for a while.
Thanks in advance
Click to expand...
Click to collapse
just use factory reset from the settings menu.
^ this solved the problem ,and it's working like a charm. although the battery sometimes drop and rise in value again after restart.
should I upgrade to 4.1.2 btw?
Hi guys,
I am selling my S3 and looked online at the best way to securely wipe my data from my device. So I encrypted as instructed then used an called IShredder Pro to do a further clean.
I am now unable to decrypt the phone and when I restart the code is not accepted.
Restart takes me to recovery and I cannot factory reset, wipe or even reinstall the custom rom on it.
Can anyone help??
Thanks in advance..
DimensionZ said:
Hi guys,
I am selling my S3 and looked online at the best way to securely wipe my data from my device. So I encrypted as instructed then used an called IShredder Pro to do a further clean.
I am now unable to decrypt the phone and when I restart the code is not accepted.
Restart takes me to recovery and I cannot factory reset, wipe or even reinstall the custom rom on it.
Can anyone help??
Thanks in advance..
Click to expand...
Click to collapse
Reinstall stock rom with odin.
Darke5tShad0w said:
Reinstall stock rom with odin.
Click to expand...
Click to collapse
Ok, I will give that a go.
Thanks :good:
DimensionZ said:
Ok, I will give that a go.
Thanks :good:
Click to expand...
Click to collapse
Returned to stock using ODIN and factory reset WORKED!! Thanks again...
DimensionZ said:
Returned to stock using ODIN and factory reset WORKED!! Thanks again...
Click to expand...
Click to collapse
No problems glad its sorted.
Since 2 weeks there is this Removed Apps file or application is deleting whatsapp on the device and now all the devices are infected With The same Problem And also all the Phones At the home Get Powered off the same time.
If anyone Knows the solution To it kindly Tell will highly be appreciated.
(Have tried Changing the wifi , changing google accounts, did flash the softwares yet it comes again)
Factory reset?
Arealhooman said:
Factory reset?
Click to expand...
Click to collapse
done with all shizz like flashing and factory reset
are you full stocked? Locked BL?
what do you mean
Arealhooman said:
are you full stocked? Locked BLw
Click to expand...
Click to collapse
smarttech947 said:
what do you mean
Click to expand...
Click to collapse
Are you on fully stock firmware? Is your bootloader locke?
It can’t be a virus. Viruses would be gone by factory resets. What happens if you click on one of those weird apps? Do you see them in your app list? If so, what is their package name?