HI i´ve a Problem with my xda !! Yesterday i´ve testet a irda connection.
Of course it didnßt work now my Xda get no connection to a pc. SOme Programms have an error and crash e.g. ActiveSync! When i go to the options point. The only way then is to reset!
Mybiggest problem i can´t flash a new image to the rom because i dont get the connection!! I´ve version 1.2 of the developers.com!
THe Phone doesn´t get any connection, ive 2 Cards from different mobile nets i dont work!!
It be very well i´ve you can help me!
Sounds like you had a failed radio stack upgrade, is that correct?
If so that's the reason why you're having ActiveSync problem.
BTW what radio stack are/were you running?
Related
Hello,
I tried to upgrade my SPV M1000 to WM5. I followed the procedure and ran the device in bootloader mode. I put the device on the cradle and it displayed USB and V1.06. Ok sounded good.
I started then the HimaUpgradeUt.exe program on the PC. The problem is HimaUpgradeUt.exe didn't find the mobile device at all. After maybe 1 minute looking to it displayed an error 101 message.
I tried different things : install ActiveSync 3.8, 4.2, 4.5 (no change)
I tried to connect the device with mty and it worked !
I tried to run HimaUpgradeUt.exe with the SPV running WM2003 and it found the device. I didn't try to upgrade in this mode anyway.
Any help is very welcome.
is your machine with win vista also?
as you said that you tryed to install ActiveSync 3.8, 4.2, 4.5, guess its WinXP. if its 2000/WinXP/win2003 then use only 4.2 version of ActiveSync. don't know why but i can only have sucess with that version. check for any security software that may block COM. with ActiveSync-Pocketpc.
that HimaUpgradeUt.exe you use is for your model? as im not an expert on this matter, don't know if your precise phone is a himalaya, maybe thats the prob. ehehhe then maybe not as im not aware of all the brands this peace of tech can became!
do right click on my computer and select manage, goto device manager and see for a mobile entry there, while your pocket is connected in serial/usb boot mode. there must be a windows ce device there for this to happen, and you should, not a must, but try to shut activesynch down while doing this detection with HimaUpgradeUt
Yes I'm running Windows XP Pro SP2. I installed activesync 4.2 again and disabled the firewall. I can see windows detecting the device when I put it on the cradle. But there is still the 101 error message when I try to run the update.
Vista and upgrade
Firstly thanks to marcjero for guiding me to this thread...
secondly... I had no probs at all, syncing my device with vista's WMDC(Windows mobile device center), apparently I tried to flash my device... and yes its an i-mate XDA II, currently running on C_ShekharAKU3.5.R40.P24_public_ROM and want to update to the latest one... apparently, connected my device to my system in bootloader mode... and well since then my system has a prob detecting my device... and I cannot even sync now... when i try to run HimaUpgrade, get the same 101 error code... :-(
any ideas how to get this thing working again?
PS: its seriously frustrating for me
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
syncing not working either...
xda2jojo said:
you cannot flash the device except in winxp...
jojo
Click to expand...
Click to collapse
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
xda2jojo said:
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
Click to expand...
Click to collapse
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
daWidoW said:
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
Click to expand...
Click to collapse
marcjero said:
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
Click to expand...
Click to collapse
what OS you are using while flashing and synching? xp? vista?
I'm running XP SP2
About Vista...
Read this thread
Could worth to try.
I tried to flash using my work laptop and it's working now
44% processed, finger are crossed...
Hello,
I have a big problem to solve. A friend updated a ROM without unlocking. I really dont know what he did.
But, I noticed that the Wizard have a ROM, but the system is too slow to connect via activesync.
I wanna use the WST but I cant connect.
Can someone of you tell me how can I do to connect via WST, to fix this problem?
Hi,
I have a problem with my HD2 (UK). I search and read of the forum and found that others had the same problem but I couldn't find any solution that works for me.
I flashed the Artemis ROM version 28. Before that on I used to have a Dutty version. The phone became very unstable and it even hard reset itself. After some time it stopped booting after a hard reset. It freezes in the welcome page or network selection page. At this stage it is impossible to connect via ActiveSync.
I tried to re-flash radio, ROM or even to perform a Task 29 but nothing works because when I boot into the bootloader and connect the phone to the USB, the "Serial" connection does not change to "USB" therefore nothing works.
I have HSPL v2. In the bootloader it says: SPL-2.08.HSPL
I believe (not 100% sure) that the radio version is: Leo_RADIO_2.12.50.02_2
Is there a chance I can solve this?
Thank you!
have you tried flashing from the sd card yet?
Not yet. I need to find an microSD to SD adapter as I cannot access the card using the phone.
Thanks!
Hello again,
I solved the problem. I tried to use USB from the bootloader using a different PC. It worked. I flashed HSPL3, radio and the Artemis ROM and it work fine now.
Thank you!
xerxes_ro said:
Hello again,
I solved the problem. I tried to use USB from the bootloader using a different PC. It worked. I flashed HSPL3, radio and the Artemis ROM and it work fine now.
Thank you!
Click to expand...
Click to collapse
Glad you got it fixed. Thread closed
Hi,
I'm trying to flash my HSPL, using HSPL2 or HSPL3, but it doesn't work.
At every attempt, I've got that stupid "flow:00000001 and error code:0000002 and description:USB connect failed!" popup...
I've tried every USB port of my laptop, I've tried with WMDC 6.1, I've tried with the bootloader USB mode, tried "run as administrator", etc. it never worked
My HD2 is a french Orange, with 1.72 official rom and 1.66 HSPL.
Any idea/suggestion/new method ?
It's really frustrating !!
Thanks for your help !
(FYI, my laptop is running on Vista)
up pleez
some people never get a particular PC to work, no obvious reason why. Usually using another machine sorts it out. Flashing and syncing still usually works even though hspl doesn't.
http://forum.xda-developers.com/showthread.php?t=618084&page=14
http://forum.xda-developers.com/showthread.php?t=616422
try reading these,right from the beginning,slowly..
(can be deleted) Wow! I was posting in a German forum via Tapatalk, and the post ended here! Not that i'm not an XDA member, but i never ever read this thread!
Sounds like USB port is broken.
Hi all,
I've read a couple of threads for several days now, but none of the answers worked for me.
Problem is: I can connect from my HD2 to my desktop PC (win 7) initially, but when I try to install a new ROM (3.14.407_2), my HD2 restarts, shows the four colour screen and nothing more happens. After some minutes, my PC tells me that my phone isn't connected anymore.
It worked two months ago for the last ROM flash, but now nothing helps.
Tried:
- rebooting PPC and PC several times
- deleting partnership and setting up a new one
- disabling "faster connect" for usb to PC settings - afterwards, PC doesn't recognize any connection at all
- hard reset on PPC
I have no idea what to try next.. I wanted to install HSPL2 and flash the ROM from my SD card, but can't install HSPL2 ... same problem.
Any suggestions?
Thanks
Infyrana
I also tried several USB ports on my PC
You think the HD2 USB port is broken? But I was able to transfer data when connected as normal device without active sync.
Do I have any chance to check, whether you are right, without having to send my phone to HTC?
maybe running the update in compatibility mode will help?
I thought the microsoft mobile device center (or however it is called) was made for win7, as the actual activeSync tool cannot be used?
So I can't see a benefit from this, but anyway.. I will try.
You could try using BlueTooth with ActiveSync, thats what I do. I have a "micro" bluetooth adaptor for my laptop and it all works fine... just a bit slower.
A
Infyrana said:
I thought the microsoft mobile device center (or however it is called) was made for win7, as the actual activeSync tool cannot be used?
So I can't see a benefit from this, but anyway.. I will try.
Click to expand...
Click to collapse
the compatibility mode for the ROM update file could help becasuse it is a separate application (no guarantee though as I have no way to check it on my PC)
compatibility mode didn't help.
don't have a bluetooth stick ...
no further suggestions?
Just found out, that windows tries to install driver "Qualcomm CDMA Technologies MSM" when I connect my HD2 after starting bootloader.
But it just searches and doesn't find anything. I searched by myself, but didn't find the driver anywhere ...
if you are really determined to update ROM, find the thread on ROM 3.14 here on xda forum, I recall seeing guidelines on installing ROM from SD Card
of course it will not solve your sync problem, but still...
Yah ... I wanted to install HSPL2 to be able to do install the ROM from the SD card (at least that's what I understood - that I need that first), but I can't install it, as I already wrote.
I GOT IT!!!
Finally.. in a forum somewhere in a forgotten corner of the internet.. someone gave an advice to uninstall the windows mobile device center and reinstall it.
After uninstalling, I had some trouble to find it again, but finally got it.
And guess what: it works now.
Windows managed to install the quadcomm driver and I could update my ROM.
Never had such a hard challenge with my HD2.
Thanks everyone who tried to help!