Ive read people asking this same question and it hasnt been addressed yet. I downloaded and installed the SE Rom 1.2, and I cant get the Phonext to assign individual ringtones. Ive tried everything, 100K or less, reinstalling Phonext, even trying a standard tone like Bellditty.wav, and Phonext always plays the default ringtone. Ive tried putting it in the Windows\Rings\ folder and still nothing. The only difference ive noticed in the phone since v1.2 was installed is the way my phone dials or recieves calls. Before when i dialed a number it filled out the ()and- automatically, ex: 555-555 now its 5555555, and before the caller id showed as 1(209)555-5555, now its 12095555555. And just out of curiosity, why does Caller2picture and Phonext always copy the ringtone to the Main Memory. The purpose of a program like c2p or Phonext is to assign alot of ringtones, Id rather have my ringtones on my 256MB Storage Card than my 32MB main memory, Ive tried changing my registry to set the default rings folder on my storage card, and it works when the phone is on, but if it starts to rings while my phones off, it wont ring. And thats setting the ringtone through the regular option not phonext, phonext still doesnt work. Has anyone figurd this out yet. Thanks for any help.
My conclusion, I already give up these 2 app regard ringtone setting. Just stick with the regular option.
One more thing, I have the same problem as u described. When I turn off the dvice, incoming call doesn't ring. One way to figure out is only turn off the screen and everything works fine while u set the default ring folder to the storage card.
This was a bug in Special Edition v1.2, not in PhonExt: I missed a registry key. If you add the following registry setting:
[HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0]
"SavedSound"="DefaultRing .wav"
PhonExt's distinctive ring feature will work.
Or you could make a new 3.17.03 based ROM from the kitchen. PhonExt's distinctive ring feature does not work on any ROM based on WM2003.
I've been using the Pic and Ring program with WM2003 and it's working just fine. I used it with 3.17 and 4.005 and 4.010
http://tucows-pda.alphalink.com.au/pocket/preview/320312.html
- Jim
Thank you very much for the reply, i'll add the registry key soon. Thanks again.
P.S. XDA-Developers.com RULES!
HI jgme,
Did you get your phonext working? I have mine taken from a rom kitchen cooked 3.17 rom and has the registry setting that xda developer has posted earlier. It still won't work. Can someone kindly give me a checklist on all the areas to check on to get the darn software working?
Cheers
Vic
No I fixed the Reg key and it still didnt work. Well when i open up regedit, SavedSound was already there, so i changed the value to defaultRing .wav and it still didnt work. So maybe theres someone with other ideas?
Hi I'm suffering from the same problem with caller id show as +1(208) 2334 4444 when dialled using PhonExt it inserts +1 which is US area code. My contact list store all contact numbers with (0208) 234 4444. I'm located in the UK I'm using
ROM VERSION: 3.17.03 ENG
ROM DATE 05/15/03
RADIO VERSION 4.21.00
Protocol version : 32554
PhonEXT 1.2.0.0
Any suggestion getting this to work .
Hi
Go to settings, connections, connections, dialling locations and change the country code. I simply deleted the entries in area code and country code and I could dial normally in the UK. However, I still can't get the ringtone customised to work !!!
:x
Vic
Related
Can anyone explain why when I recieve incoming calls, my XDA doesn't match numbers to contacts and displays names instead of just a number?
I believe that you need to ensure you are running the latest ROM & Radio Stack.
Also your contacts must be prefixed with +44 so it can do a full number match.
My contacts were all prefixed with +44..number
But when I dialed a contact, it would not dial. Once I removed the +44 it worked.
So the question is how can it display a contact name when I have taken away this prefix?
Primed
Hi guys,
One other odd thing I have noticed is that if you put a - in the number, i.e 07801-12345 it does not always match the caller and says it is unknown number.
Does any one have any ideas?
I am running the XDA Dev Rom.
Thanks, Gil.
i've noticed that sms complete there names when i put the country code and everything in the contact and incomeing calls complete when i have only the area code and the phone number. this is realy anoying
Try this patch from Paragon Software http://www.penreader.com/PocketPC/SMS_Name.html
which fixes all SMS2Name confilcts ... and voice calls (if the caller uses their mobile number).
But, there seems to be varying degrees of success downloading this patch.
If you cannot download the patch, let me know I have the original source code..which works great.
PS: Upgrade to PPC 2003 which has this fix built in ! :shock:
in what format will everything need to be in to work with this new tool?
as i think that that fancy nice looking dialer program that comes in the dev's rom needs them without country code.
Hello all. Before tweaking to DCD 3.1.2, Voice command would announce incoming messages and callers. Now, with dcd, the actual ringtone is played over bluetooth headset and no announcments are made. any thoughts on how to eliminate ringtone being played over bluetooth and have announcments made again? Thanks folks. You guys rock!
mine acts different...i get ringtone in my headset and it announces who calls over ringtone in my headset, also my phone vibrates but doesnt ring.
i wish there was an easy way to configure the settings cuz i would like for my phone to vibrate and ring out loud (im not always wearing my bt headset 24/7 when bt is enabled) and i want my headset to announce so and so is caling or the number if its not in my phonebook.
i also notice when in a call it announces who is calling in for call waiting which is cool
Ring and voice command
Not only those problems but, I have no options for voice commands. I can't set them up use them or even find a icon for them. I am also missing a lot of just standard options. There are no personal settings there is no where to Finnish the GPS setup. I am getting a little tired of running a rom that has absolutely nothing in it. I understand that you should be able to do more with a dcd rom but I don't understand how you are supposed to utilize these options when they have been forcefully removed from the OS. If anyone knows where I can pick up the stock voice command prog, the stock MSN messenger, and how to replace the missing personal settings tab and the slide sound tab. That would be helpful.
Not only those problems but, I have no options for voice commands. I can't set them up use them or even find a icon for them. I am also missing a lot of just standard options. There are no personal settings there is no where to Finnish the GPS setup. I am getting a little tired of running a rom that has absolutely nothing in it. I understand that you should be able to do more with a dcd rom but I don't understand how you are supposed to utilize these options when they have been forcefully removed from the OS. If anyone knows where I can pick up the stock voice command prog, the stock MSN messenger, and how to replace the missing personal settings tab and the slide sound tab. That would be helpful.
Click to expand...
Click to collapse
First of all, dcd's roms are meant to be cooked clean. That's why UC compatibility was added. Lots of people got excited when it was first added, but I've seen very very few people actually utilize it the way it's supposed to. Before I go on I have to ask...are you cooking your own rom using the kitchen, or are you using the precooked rom that is posted? If you're using the latter, then NOTHING besides the essential functions will be installed. It's a clean precooked rom and nothing else.
That being said, if you're cooking your own rom with the kitchen, there's a few things you should know...
Voice Command does not come stock with the phone. It's a third party application from Microsoft that costs roughly $40. There isn't an option for it in BuildOS, so unless you have it and you're installing it via a cab (the way I recommend), or through an OEM, then you will not see any options for it, as it is not installed. If you're referring to Voice Speed Dialer, that's a whole different program. There are no options for it. You have to manually record yourself speaking the commands.
Sliding Sound has to be added using BuildOS. If you're not checking it off prior to cooking the rom, then it will not be included in your rom.
I don't use MSN messenger, but I'm going to guess that Windows Live is what you're looking for? If so, Windows Live also has to be added using BuildOS.
I'm not sure what you mean when you say "Finish the GPS settings". Could you clarify?
As far as your personal settings tab goes, that is a valid problem and we would have to speak further in detail for me to diagnose it.
MS Voice Command: Definitive Guide Thread...
http://forum.xda-developers.com/showthread.php?t=391262
P.S. had the same problem, got the 1.6.19209 version listed in that thread, now voice command talks right over the ring tone and I get the best of both worlds.
i dont use voice command really, but i noticed after the update that my phone no longer physically shows the contact or number of whos calling when my phone rings.
It just says
Verizon Wireless
Incomming Call
Then the rest of the box is blank.
Anyone know how to fix this? I didn't run the verizon cab, but with 3.1.2 i didn't think i needed to? Especially since it still says verizon wireless when people call, and i can call out/send sms
I didn't run the verizon cab, but with 3.1.2 i didn't think i needed to? Especially since it still says verizon wireless when people call, and i can call out/send sms
Click to expand...
Click to collapse
Please read more. All 3.1.x roms REQUIRE the carrier cab to be installed. It says it in clear text right on the first page of the kitchen thread.
ROM requires a carrier cab:
Alltel
Bell
Cricket
Iusacell
Qwest
Sprint
Telecom NZ
Telus
Verizon
Click to expand...
Click to collapse
voice command and ringer volume
gcincotta said:
Please read more. All 3.1.x roms REQUIRE the carrier cab to be installed. It says it in clear text right on the first page of the kitchen thread.
Click to expand...
Click to collapse
Can someone with DCD Rom 3.1.x and also MS Voice Command confirm if a bug is present? I have 3.0.4 and my wife has 3.0.1 and we both have the same issue with MS VC. Basically, if you use VC to set the ringer volume, you can not re-adjust it using the phone. So, turn off ringer using VC then try to turn it back on using the stylus. Verify that the volume is turned back on.
I simply can not turn the volume back on with the stylus. I can turn it back using VC no problem. Thanks.
I personally do not use Microsoft Voice Command anymore.
The reason is that it uses a lot of resources on my phone.
I did several customizations on my phone and have several apps installed and I roughly get 24 to 25 mb at startup. With voice command I get around 19 to 20.
I just rather use Voice Speed Dial that is in DCD's Kitchens. Yes you would have to program your voice to recognize the commands, but it does what I need it to do and it saves a lot of memory.
findthisfunny said:
Can someone with DCD Rom 3.1.x and also MS Voice Command confirm if a bug is present? I have 3.0.4 and my wife has 3.0.1 and we both have the same issue with MS VC. Basically, if you use VC to set the ringer volume, you can not re-adjust it using the phone. So, turn off ringer using VC then try to turn it back on using the stylus. Verify that the volume is turned back on.
I simply can not turn the volume back on with the stylus. I can turn it back using VC no problem. Thanks.
Click to expand...
Click to collapse
I have been using VC with all of DCD's ROMS and have not had a problem. I bought the package a while back but found an OEM that I use now. I works great when it does figure out what I am saying. LOL
I don't have any issues with setting the ringer by VC and then by stylus. I also don't have any issues using it through my BT headset. Make sure you have the right settings in the settings control panel with the icond Voice Command. Check out the options and notifications for each of the checked items. There was also a set of files to fix something a while back I have posted them here but you should do the search to find out what they fixed.
After many tries without success, I finally managed to integrate in only one cab all the needed to get VOIP calls without the listener bug (rtcdll.dll) in my two devices. I checked it in HTC TYTN (Hermes) and HTC Trinity (P3600) runing both Windows Mobile 6.1.
The install method is simple. Download this file:
Code:
http://rapidshare.com/files/124054481/destr0_VOIP_WM61___SIP_Config_1.1.CAB
And install in your phone.
Then, go to Today menu, Programs, Sip Config Tool, input your provider settings and save. Then, go to Today menu, Settings, Today, Items and check "Internet Calling". Then, go to Today menu, Settings, Phone, Internet, and select "Only if cellular is not available" or "whenever available" according to your needs.
Softreset your phone, and after that, connect to a wifi network. You will notice that in your Today screen, the VOIP line has changed from "No service" to "Available". If you want to make a VOIP call, click on this line, and will change to "Selected". All the calls you make from now on will be done using your VOIP line.
Hope it helps you!
destr0 said:
After many tries without success, I finally managed to integrate in only one cab all the needed to get VOIP calls without the listener bug (rtcdll.dll) in my two devices. I checked it in HTC TYTN (Hermes) and HTC Trinity (P3600) runing both Windows Mobile 6.1.
The install method is simple. Download this file:
Code:
http://rapidshare.com/files/123650406/destr0_VOIP_WM61___SIP_Config.CAB
And install in your phone.
Then, go to Today menu, Programs, Sip Config Tool, input your provider settings and save. Then, go to Today menu, Settings, Today, Items and check "Internet Calling". Then, go to Today menu, Settings, Phone, Internet, and select "Only if cellular is not available" or "whenever available" according to your needs.
Softreset your phone, and after that, connect to a wifi network. You will notice that in your Today screen, the VOIP line has changed from "No service" to "Available". If you want to make a VOIP call, click on this line, and will change to "Selected". All the calls you make from now on will be done using your VOIP line.
Hope it helps you!
Click to expand...
Click to collapse
Nice work, will test now.
Been a while since ive seen a single cab for the drivers and SIP config tool (thx shaun33).
EDIT:: fired the cab up in WM6 emulator device and the dll loads up nicely, sip config tool is there. Internet Calling today item shows up and the Internet tab appears in phone settings. Its good stuff....didnt need a soft reset either.
please provide feedback for your devices, I checked in the two ones I have and it worked.
SIP config tool credits go to shaun33
destr0 said:
please provide feedback for your devices, I checked in the two ones I have and it worked.
SIP config tool credits go to shaun33
Click to expand...
Click to collapse
Hi destr0, just installed on Kaiser (TyTN_II) with HyperDragon IIIm ROM (WM 6.1 "lite"). Registered and running to my VoIP provider like a charm.
Tomorrow I'll use/test it heavily at work (where we have an asterisk/sip as internal phone system)...
Thanks a lot for your sharing.
Dude,
Its awsome to see that that app is still kicking.
If you can think of any upgrades that would make it easier to intergrate with your cab shoot me a PM or catch me in the IRC chan.
Everything seems to be working ok on my AT&T Tilt 8925, but i dunno what to put for sip server and such. Tried going to tools, load config, from device and that brings up an error every time.
daigoro64, I have an asterisk server at work and even with it, calls go out through the wifi and reach the destination phone.
yusuke14, you have to create yourself a VOIP account. There are many providers, I personally use three from betamax: www.voipbuster.com, www.justvoip.com and www.intervoip.com. You can look at theis fares here: http://backsla.sh/betamax
Shaun33, of course your app still rocks! many thanks for it. I suggest you could have a list of sip servers in a dropdown box to be easier to configure for the first time
Good work destr0. I keep it for next NiAx's Rom.
NiAx.Team
You listen from your external speaker or internal ? like normal call ?
John_A said:
You listen from your external speaker or internal ? like normal call ?
Click to expand...
Click to collapse
from the internal, like a normal call
Thanks a lot .... I try it now with my asterisk
Can´t wait to try it, nice work
Great work man..Keep it up
Here is an OEM for It :http://rapidshare.com/files/123749980/OEM_VOIP.rar
A big thank you for a great job.
Gracias
destr0 said:
After many tries without success, I finally managed to integrate in only one cab all the needed to get VOIP calls without the listener bug (rtcdll.dll) in my two devices. I checked it in HTC TYTN (Hermes) and HTC Trinity (P3600) runing both Windows Mobile 6.1.
The install method is simple. Download this file:
Code:
http://rapidshare.com/files/123650406/destr0_VOIP_WM61___SIP_Config.CAB
And install in your phone.
Then, go to Today menu, Programs, Sip Config Tool, input your provider settings and save. Then, go to Today menu, Settings, Today, Items and check "Internet Calling". Then, go to Today menu, Settings, Phone, Internet, and select "Only if cellular is not available" or "whenever available" according to your needs.
Softreset your phone, and after that, connect to a wifi network. You will notice that in your Today screen, the VOIP line has changed from "No service" to "Available". If you want to make a VOIP call, click on this line, and will change to "Selected". All the calls you make from now on will be done using your VOIP line.
Hope it helps you!
Click to expand...
Click to collapse
I have an Elfin (HTC Touch) with the latest rom 19949.1.2 installed. Sound comes from the external speaker and mic is not working. This might be caused by the latest rom. Other Elf\Elfin user tried to install Voip for wm6.1?
jmmertens said:
I have an Elfin (HTC Touch) with the latest rom 19949.1.2 installed. Sound comes from the external speaker and mic is not working. This might be caused by the latest rom. Other Elf\Elfin user tried to install Voip for wm6.1?
Click to expand...
Click to collapse
Can anyone confirm it uses the external speaker in the Elfin?
In my TYTN (build 19949.1.2) and Trinity (build 19213) uses the internal one
very good efforts. Wow!
destr0 said:
please provide feedback for your devices, I checked in the two ones I have and it worked.
SIP config tool credits go to shaun33
Click to expand...
Click to collapse
--> Will it work on mi P3300 (Artemis) running WM5 ??
tried it but doesn't work here.
Incoming calls: after answering with green button other party still hears the tone as if i didn't pick up.
Outgoing calls: can't hear other party
this was tested over 3G. Haven't tested over wifi.
Quite a while ago, I flashed to DCD 3.2.6. After that, I noticed that I couldn't dial phone numbers from my contacts, but I could dial them directly. When I would dial using the contact, it would look like the call was going through, then I would get three error chimes and a message saying the call was disconnected.
Finally, I figured out that the difference is that in my contacts, the phone numbers all have "+1" before the number, i.e. "+1(206) 555-1212". This is the international prefix (http://en.wikipedia.org/wiki/List_of_international_call_prefixes#Syntax).
I assumed that this was a problem with DCD 3.2.6. However, I just flashed DCD 4.1.2, and the same issue is there. I suppose I could go through all 223 of my contacts and edit the phone numbers to get rid of the plus sign. However, this is the correct format for a number, and non-custom ROMs have worked fine with it.
Anyone got an idea of how to get the dialer with DCD 4.1.2 to work with these phone numbers? I'm guessing I just need to change some configuration relating to my International Prefix (U.S.) Alternatively, does anyone know of a ROM that does work with these phone numbers and also keeps the GPS and tethering (via Internet Sharing) working on my Verizon XV6800?
Thanks,
Jamie
Got it
Okay, I found it.
In the dialer application, go to "Menu", "Options...", "Services" tab, scroll down to "Plus Code Dialing". The rest is self-explanatory.
Hopefully, this will save someone else some time.
Jamie
New IMPROVED CABS HERE
*********
WM6.5 and now WM6.1
*********Install on Fresh OS
Tested and flying on my HD, HD2, Omnia II, Glofiish M700, Touch Pro2[Rhodium], BlueAngel[PDA2K].
This time i have made single cab[sipConfig.cab] with Schap`s voip setup inbuilt. Hopefully 3g option will work with this cab as i have changed few settings. Tweaked is home screen item selection[select thru Available and selected to make cellular call or sip/voip call{one have to use classic home screen to do this}]. This cab is GSM codec based unlike previous cabs hence very low bandwidth is required to place calls, Can be used to make calls over GPRS but not sure. Quality of calls is .99/1 and no dropouts and one can call as long as credit available in account. What else, as this cab will integrate into phone system, it is very easy to use with addressbook, etc. I have attached audioswitch out file which if installed comes into action[can hear from earpiece] 13 seconds after phone window is active on screen, doesn`t matter calling or recieving. I have also attached SRS file just in case if someone hear less/low volume from earpiece just follow the instructions attached. Also attaced is Wifi always on file which some HD2 users need. Also 5060 port has been enabled in these cabs but you may need to forward 5060UDP port in your router for possible two way communication. Hopefully you guys like this cab, Please leave comments and suggestions. Thanks
Credits to developers.
*Most of the bugs has been fixed discussced in previous cabs.
Previous Cabs can be found here
--------------------------------------------
UPDATE : 1
DIAL PLANNew cab[sipConfigDialPlan.cab] with jaaps Dial Plan inbuilt. Both sipConfig(setupVOIP) and DialPlan can be accessed from Start Menu. Now one have the option to install with or without dial plan. Thanks
UPDATE : 2
GPSNow there will be no problem when using GPS [File Updated]
UPDATE : 3
START MENUOnly one instance of voipSetup shortcut in start menu
UPDATE : 4
WM6.1 SUPPORTNow WM6.1 OS supported just choose the cab with WM6.1 written in it, others are for WM6.5 OS.
UPDATE : 5
VOLUME INCREASE Tip By: angusc Thanks Now one will be able to hear bit loud sound either from back speaker or earpiece.
UPDATE : 6
OTHER CODEC SUPPORTNow all major codec supported ie: G.711 a-law, G.711 u-law, GSM codec.
--------------------------------------------
*RECOMENDED INSTALL LOCATION : DEVICE*
*DO NOT INSTALL ALL CABS, JUST INSTALL ONLY ONE YOU WANT*
*IF NOT WORKING OR GIVES YOU ERROR, THEN ITS OPERATING SYSTEM LIMITATION*
*DO NOT INSTALL WM6.1 CABS ON WM6.5 OS AND VISE VERSA*
*AudioSwitch.cab/WifiNoStandby.CAB/Tested SRS.rar cabs are OPTIONAL and can be installed on both WM6.1 and WM6.5 OS*
Will you eventually release a dialplan supported version? I know this is a nitpick but I really use that file alot.
Yes, working on it. But will take time as hard to get time off. Thanks
Any reason why I can't install this...
Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate.
try installing remove certificate or first cab in Tested SRS.rar attached to get rid of this warning. are you installing on fresh OS. Thanks
Sorry, I'm still a noob at this. The Blackberry phones can make free calls via WiFi on T-Mobile when overseas. Will this program make the HD2 work the same way, by using minutes off my T-Mobile plan? Or do I have to put a cash balance into a 3rd party provider?
cu2cool said:
Sorry, I'm still a noob at this. The Blackberry phones can make free calls via WiFi on T-Mobile when overseas. Will this program make the HD2 work the same way, by using minutes off my T-Mobile plan? Or do I have to put a cash balance into a 3rd party provider?
Click to expand...
Click to collapse
I think you are slightly confusing things, with voip you can make calls from anywhere as long as you have internet access. Now the free bit is different, you must have a voip provider and their fees may vary. Now if tmobile is giving away voip subscriptions with their wireless then I need to find out about that, but I have never heard of it!
@dhillonbros - Much love for working on this!
So is this just an integration software like http://www.portsip.com/ to make internet calling seamless on the HD2?
cu2cool said:
So is this just an integration software like http://www.portsip.com/ to make internet calling seamless on the HD2?
Click to expand...
Click to collapse
are you sure that its an integrated solution
No, I'm not sure. That's just what it looks like. There's a whole thread for it here http://forum.xda-developers.com/showthread.php?t=508715.
I tried this on my HD2 but couldn't get it to work... I got errors in cprog.exe and gwes.exe on startup that I've never had before. When I tried to make calls it just went through the cell network or said "phone not connected" if I turned it off. The problem might be that I wasn't sure how to correctly register to my voip provider. Anyway, I didn't want to mess around with it and because of the cprog/gwes errors tried to uninstall - but uninstall didn't work.
Maybe I'll try again later. Does a proxy server have to be put in the settings, or is that for only certain setups? Would it usually be the same as the registrar server?
I installed todat without any errors. T-Mobile UK. The phone picks up my SIP landline service number but in the today screen after the no. it states no service.
I also appear to have two copies of the same software listed in my programs one called SetupVOIP the other sipConfig. Both on clicking setupvoip.exe
the dialer option page is blank.
looking forward to dumping fring but need a wee bit of help to get over the last hurdle.
this build is working better than older version on my Tilt. The issues I have are the dial plan, but I fixed that by editing the ipdialplan.xml file and removing all the number nines in it.
Second issue is that it looses registration after a while. I'm using AT&T 3G. Later on it is registered again but on and off throughout the day.
Installation ok but no voip on HD2
Hello,
The instalation is gonna well, but i have only the configuration tool, no additional items in today screen or phone menu, how can i switch between voip and standard calls?
br
nobisz
The configuration tool is used to set when your call will go through voip ("never", "whenever available", ...). From there it works transparently. For example, if you set to "whenever available" all calls will go through VOIP if it is able to register to the VOIP service, otherwise they will go through your cell network.
in the configuration tool, should I select TCP or UDP? I am using 3G
cesierra said:
in the configuration tool, should i select tcp or udp? I am using 3g
Click to expand...
Click to collapse
udp is the best option
@amcclean : Please try new cab. Problem fixed
interlope said:
I tried this on my HD2 but couldn't get it to work... I got errors in cprog.exe and gwes.exe on startup that I've never had before. When I tried to make calls it just went through the cell network or said "phone not connected" if I turned it off. The problem might be that I wasn't sure how to correctly register to my voip provider. Anyway, I didn't want to mess around with it and because of the cprog/gwes errors tried to uninstall - but uninstall didn't work.
Maybe I'll try again later. Does a proxy server have to be put in the settings, or is that for only certain setups? Would it usually be the same as the registrar server?
Click to expand...
Click to collapse
Mines flying on HD2, same as registrar server.
In Polish version of WM 6.5 you shall add "telefon" in command.txt file (Program Files/audioswitch) for the AudioSwitch to work....