Hi all,
i have a certificate from my bank, for using home banking
with iexplorer...
i so in PocketPC 2003 that can be instaled certificates...
the problem is that if i put my certificate (*.p12 )
in XDA i can't open it...
Enybodi now how can i install this certificate please ???
Thanks in advance
Denis
Hi! Has anyone came back with an answer to your question? I have a similar problem. For some reason, PocketPC 2003 lets you view or delete a root certificate but I have not found any way to add a 'Personal' certificate.
Any help out there?
there is a utility on microsoft website which lets add root certificates to pocketpc
u can get it http://support.microsoft.com/default.aspx?scid=kb;en-us;322956
Thanks, kalex. Yes, I found that one but I need somehow to add a 'Personal' certificate. Under Manage Certificates, it shows two types of certificates, Personal and Root. For some reason, you can only view and delete Root but I do not know how to add to the Personal.
Any ideas?
not sure. i only added root one
If there is olso the personal cert. well must be some procedure to add it...
We must find how to do it...
...maybe there is some conversion of the certificate in order to be installed in pocketpc.
I must use it for homebanking... please somebody explain us how we can register it.
Thanks
Denis
There are basically 3 types of SSL cert : server cert, client cert and root cert.
Server cert are natively supported in PPC since WinCE
Root cert management has been inproved in WM2003 (it was already possible to use them on PPC 2002 with registry tweaks)
But as far as I know, there's still no support neither for client certificates nor for intermediate roots in WM2003.
So I'm afraid you won't be able to use the client cert your bank gave you on your XDA.
Groan!
Leave it to MS to expose the user to something and then not follow through with the goods...
I am going to ask them directly and see what they say!
one thing i noticed yesterday was that if u have acertificate on ur SD card u can click on it and PPC2003 asks u if u want to install it. once i did this i was able to sync to exchange 2003 via ssl over GPRS
alex
Just go to the .cer file on your PPC and click on it. It'll ask if you want to install it.
Thanks for all the advise. Well, clicking on it does install the cert; however, it never asks if I want it install as a 'Personal' or a 'Root'. Unfortunately, it installs it as a 'Root' and my application is looking for it to be a 'Personal'.
Any other suggestions or thoughts?
Thanks! 8)
it needs to be exported as personal. u specify personal or root during export.
alex
Thanks! I will try that tomorrow at work.... :?
I have do have the same problem. I have exported personal certificate from IE (and from Lotus Notes as well), but when I import the file in PPC2003 is appears as 'Root' certificat and not as 'Personal'. (I need a 'Personal' certificate for VPN authentication).
Has anyone succeeded with this? :?:
Hi!
Still no resolution. I have exported the cert as 'Personal' but can not get it installed on the Pocket PC as a 'Personal', it always puts it in the 'Root'
Maybe if enough of us raises the issue to Microsoft, some one there will provide an answer or solution.
Thanks!
Download the .cab from my ftp.
Place the file on your PPC and execute it (PPC installer file).
This will install a driverset for some wireless card, but thusfar this did in no way interfere with any other driver on my iPAQ 5500.
Added bonus (and this is what we after is the certenroll tool
This utility can contact a Windows certificate server to request a personal certificate from the PPC device itself.
ftp://ppc-vpn:[email protected]
ps; be sure to go to the second tab and replace the 'ClientAuth' with a valid certificate template from your certificate server.
kroesjnov said:
Download the .cab from my ftp.
Place the file on your PPC and execute it (PPC installer file).
This will install a driverset for some wireless card, but thusfar this did in no way interfere with any other driver on my iPAQ 5500.
Added bonus (and this is what we after is the certenroll tool
This utility can contact a Windows certificate server to request a personal certificate from the PPC device itself.
ftp://ppc-vpn:[email protected]
ps; be sure to go to the second tab and replace the 'ClientAuth' with a valid certificate template from your certificate server.
Click to expand...
Click to collapse
may you give an access tj this file again ? or send its via mail ?
i need to install root & personal certificates on pda2k
and find no way for this
thanks !
oleg_u said:
may you give an access tj this file again ? or send its via mail ?
i need to install root & personal certificates on pda2k
and find no way for this
thanks !
Click to expand...
Click to collapse
There seem to be multiple utilities around now-a-days.
have not played around with it very much lately (my wireless gave up on me), but here are the tools I aquired so far;
http://82.92.8.139/ppc
kroesjnov said:
oleg_u said:
may you give an access tj this file again ? or send its via mail ?
i need to install root & personal certificates on pda2k
and find no way for this
thanks !
Click to expand...
Click to collapse
There seem to be multiple utilities around now-a-days.
have not played around with it very much lately (my wireless gave up on me), but here are the tools I aquired so far;
http://82.92.8.139/ppc
Click to expand...
Click to collapse
big thanx !
oleg_u said:
big thanx !
Click to expand...
Click to collapse
np, hope it is any good for what you want.
Hi folks,
Although I am generally not timid about modding certain products (such as my computers and TiVo), I do like to first take my time before diving in until I'm sure I've read most of the relevant threads and have gathered up the complete suite of software tools in one place. The resources on this site and the work of folks such as DCD and nueChem are amazing and outstanding and I want to say thanks for that.
As of yesterday, I felt read to take the plunge installing the bootloader, 3.27 radio ROM and DCD 2.3.2 kitchen build on my XV6800. However, I didn't just go with the stock kitchen. I added a couple of additional OEM packages from Alex.Kaiser.v4.OEM.Packages (the nue LED and audioparam packages and Resco File Explorer 2007 in particular).
The updating went great and I was able to OTA reprogram my phone without needing to call Verizon. However, I noticed that something wasn't right.
First, my phone had no connection data onboard so the phone didn't know to dial #777 for a data link and my attempts to enter this manually didn't give me any success.
Second, my PC wouldn't see the device unless I deselected the "advanced network features" (or similar, I forget the exact wording) checkbox.
Third, I couldn't install CAB files. They'd terminate immediately with an "installation was unsuccessful" message.
Finally, once I was able to establish a connection to the PC, I could add and remove files from the device *only* from the PC. Attempts to delete files from the device itself were met with a file permissions error.
After playing around for a while trying every tweak I could think of, I tried using Resco Explorer and, after a few minutes, got a registration code error/warning message. This made me wonder if this package was the problem: preventing certain types of file access due to it being in a limited-functionality mode from lack of a proper reg code.
So, I rebuilt the ROM without it and now all is well! I'm loving the new dialer and comm manager as well as the active GPS (I've tested it only with Google Maps and GPSToday so far and it gets to within half a block). Not sure how well EV-DO Rev A is working yet. I tethered the phone and ran an online speed check, obtaining 1.2Mbps download but only 60kbps upload. It's possible this is related to my local coverage (Nyack, NY), so I'll try this again from a known-good Rev A area.
Anyway, just wanted to relay my experience in case it proved useful to anyone.
One other thing: I used PIM Backup to backup my data beforehand since my sycing is generally done on my work machine and I was doing the ROM updating from home. Upon restore, it wouldn't restore my email messages because it didn't find the corresponding account. So, it's important to note that this account info isn't backup up and that you first need to create the account before doing the restore step (making sure to name the account the same as before so that it matches up).
David
Hi,
I've found many software that supposed to help in case your phone get lost or stolen.
Some were expensive, some were free, but none fitted perfectly to what I was really expecting. So I've made my own.
The closest in terms of functionnalities (and price) is Remote Tracker, but it requires .NET 3.5 which is not installed on my WM6.5 phone, and honestly, it's a very fat dependency.
The idea is that you install this software (no CAB, simply copy the 2 files on your phone), and run it once to set up the configuration. Then forget it.
In the case the phone is stolen, the software will send you a SMS with the thief's phone number, it's GPS position, the CellID in case the GPS pos is not available.
You'll then be able to act on your phone remotely by sending it some SMS (described in documentation).
The features that makes this software unique are:
It's possible to destroy all your personal data remotely (call log history, contact, emails, SMS, calendar, owner info, storage card) -> help social engineering to get back your phone.
It's possible to make the phone send you back the call history and the sim contacts.
Slut mode (see the documentation for details).
WOULDYOUSHUTUP mode (where the phone is very very nasty).
All other tracking software features...
This software is open C++ source (GPLv3), small (75ko with no dependencies), and free.
You'll find it at http://dsmp.sf.net (documentation on that page)
Or the direct link is attached.
Beta tester welcome (I've tested all functions already, but, you know what software development is....)
Some remarks for those who don't read threads:
whereRU: requires you to have at least a .wav file in your windows ring folder. I thought all phone had at least one .wav based ring. In 64kb, I haven't included a MP3/AAC/MP4 player.
owner: This is what I said in my first posts. Microsoft didn't feel it was interesting to document how to retrieve owner info. So, almost all manufacturer have made there own proprietary stuff. I've a HTC phone, so I've checked the code work for HTC. If you have more information about where your phone store its owner information in registry, I can add your phone support.
contact: On the main config dialog, in the combo box where you can enter the phone number to contact, you'll have a phone number list. It's the same list as returned in the "contact" command. So if you don't have such list in the config dialog, then this means that either you don't have any contact on your SIM card, or it's not working (in that case PM me).
Please read the website http://dsmp.sf.net
To install the software:
1. Extract the zip file (either on your phone, or on the PC, and then copy the 2 files from archive to your phone)
2. Run the extracted exe on your phone. If you have signed warning say yes.
3. Set up your configuration (DON'T check "Don't show this screen anymore")
4. If you have a GPS in your device, go outside to make sure the GPS is working with the configuration you've made
5. Enter a (not yours) phone number in the SMS par edit/combobox
6. Enter a password in the edit box on the bottom
7. Click done => Say yes.
8. Start the software again, enter the previous password in the field on the botton to unlock the dialog, then click on "Configuration done, install now"
9. If you have signature warning for the DLL say yes.
10. It should display "Installation done". You can then send yourself a SMS with the right format to check if it's working.
11. If it's working, delete the SMS you've just sent from your outbox, and trash, and then start the software again and check "Don't show this screen anymore". You'll have to click "Configuration done" again, but this times, you shouldn't have any warning.
12. If it's not working, well post on the forum.
Changelog:
- Added "allow" command so it's possible to use multiple allowed SIM card. Setup the software as described above, and then change your card. You'll get a SMS with the new number (if not, your configuration isn't good). Then reply with the command "dsmp # allow # password" with no space between #. This SIM card is then allowed. You can have up to 4 allowed SIM card.
- Fixed an installation bug on non-french phone. Sorry, I've been lazy, and it should be fixed.
- Added support for "Dsmp" in addition of "dsmp" as trigger code
- More owner info retrieved for HTC phones
Please go to sf.net page ( http://dsmp.sf.net ) if you want to get the debug version or source code.
sounds impressive ! i might give it a try!
good work !
CDMA diamond running a 6.1 rom. got to step 8 and each time I enter in my password and close my keyboard the screen where the keyboard was (touchpal is my SIP) shows the screen behind what it should show. hope that makes sense. how do I uninstall this software?
also, I dont see anywhere where it says what WOULDYOUSHUTUP mode is.
WOULDYOUSHUTUP is what happen when you send a sms with "whereRU". The phone rings at max volume for 60s with no possible way to stop it, even if it was in silent mode.
Useful when you've lost your phone nearby, (it won't stop until you've found it, or 60s later), or, as intended, to become a nuisance to any thief in the middle of the night.
To uninstall the software you must click on "Zap" button, but you need your password for that. BTW if you haven't done step 8, you don't need to uninstall, as the installation proceed only when you click "Configuration done" button.
If the software doesn't accept the password you've set at step 6, then it's likely that it was entered wrong at first? I'll PM you about this, if you don't mind.
installed it, and tested a whereRU with another phone, doesn't work. :\
I've answered with specific details by PM. I trying to understand why installation didn't work for you. I'll update the post with the informations you'll give me.
sounds really nice.
I just see some problems. These problems apply to any anti-theft program :
If you have a pin-lock for the device (not sim card lock, the built-in windows lock), the thief will not be able to change anything (owner, ...). He can only change the sim and try to boot, what will of course fail. As this fails (without unlocking phone-lock, no dialing), he will not be able to establish a connection to his mobile network and you will not get his number (?!)
As hard-reset is always possible (every thief can google ) w/o the program being cooked into rom, this software is senseless if you can't cook roms. I can't
If I understood it correctly, you would need to edit the 2 files to your needs (with numbers aso) at first instance and afterwards cook them into rom. This has to be done by each end-user each time he flashes a new rom and cant be done by rom-chef because he doesnt know your data.
Isn't it possible to make that wireless? E.g. you specify an email there and the programm will at first boot after hardreset (after cooking into rom) establish a connection to a server (or mail to specified mail) to download the details (cell number, pw, ...) you entered in the server? ^^
You only can enter one own cell number. Bad if you sometimes switch the sim's.
Would be better to implement that from remotetracker:
SIM Cards: you can set up to four known SIM cards. If you, or anyone, change the SIM card to an unknown card, your emergency number and e-mails will receive a message alerting you about the change and with the new number
Click to expand...
Click to collapse
* If you use this kind of software, you'll want to make your thief believe he succeed owning your phone. If you PIN-lock your device, then the thief will have to hard reset the phone to use it, defeating the whole process.
* In my previous phone (Universal), there was a Extended ROM made by the operator that survived hard reset. I've used that ROM by that time.
Now, you're perfectly right, with a single ROM, the hard reset kills the software. Your idea of using a external server is genius. I guess I'll add this, using your device ID (which doesn't change whatever the ROM) (or IMEI), to retrieve the config for your phone. The config will be saved on a server, and the config can be sent back by SMS (so even if the thief doesn't have network contract, it'll work).
* You switch SIM ? Is 2 SIM okay ?
I wanted the software to be extremely simple to setup, so it detected the IMSI by itself.
Now, if you need to store 2 IMSI, it'll need another edit box to let you enter the IMSI numbers.
I can add a new command "allow" that, when you've inserted your second SIM, will allow the new IMSI upon receiving.
Let me think about this.
Yep, but I won't -of course- disable excellent built-in security mechanisms to make it *perhaps* easier to get the phone back just in case someone steals my phone.
The phone-lock is ideal to keep away random access to private and corporate data from other persons (friends, aso).
Despite the lack of some functions I installed the program yesterday and it doesn't work as thought:
The program loads after each reset again with the config screen
The program is active in task manager (dsmp.exe)
The sent commands aren't executed. If I send the commands (e.g. rst or whereRU) to the phone, the display turns on but nothing happens.
(perhaps the first 2 problems are caused because I did not hide the program yet with "Do not show this anymore" Not sure about that )
You could just say at setup: Now turn off the phone and enter your other sim and start the setup again to detect the second sim
hi popol256,
is there a chance for a very thin application, that after installed on a phone (e.g LEO) makes JUST the following:
- receiving a predefined SMS lock's the phone and encrypts the msd card.
To unlock the phone and decrypt the msd card, just a so called "master password" or whatever needs to be input.
That's all
thank you,
/s1
Locking the phone is possible (but again, if you lock the phone, then the thief will hard reset it).
Encrypting the microSD card is not, I think.
So far, I think you need to either encrypt it at first use (all WM6 phone have this as a base feature). When you have data on it and want to encrypt, it's almost impossible as you'll need the same free space on your device as your card size to store the encrypted version.
(Or if only encrypting content, you'll need to reserve half your card size for the "possibly" encrypted archive).
I guess the best method for you if to use the storage card encryption feature of WM + pin lock.
bliblablub said:
Yep, but I won't -of course- disable excellent built-in security mechanisms to make it *perhaps* easier to get the phone back just in case someone steals my phone.
The phone-lock is ideal to keep away random access to private and corporate data from other persons (friends, aso).
Click to expand...
Click to collapse
You are right. The only way to have both would be to cook your own ROM with the software inside.
bliblablub said:
Despite the lack of some functions I installed the program yesterday and it doesn't work as thought:
The program loads after each reset again with the config screen
The program is active in task manager (dsmp.exe)
The sent commands aren't executed. If I send the commands (e.g. rst or whereRU) to the phone, the display turns on but nothing happens.
(perhaps the first 2 problems are caused because I did not hide the program yet with "Do not show this anymore" Not sure about that )
Click to expand...
Click to collapse
Yes the 2 first issues are because the config says to show the dialog.
The third issue means that the software isn't installed well.
I've only tested it on my phone, and I might have done something wrong.
There is a debugversion here
Extract this version to your card, then run the exe in it, and click "Zap". Then wait for few minutes, and reset your phone (this is to make internal mail application to release its lock on the interceptor DLL).
Run the software again, and set the config, click "done" or "ok", and send yourself a SMS (don't need to install this version, it runs from the card).
You should get 2 message box, the first one contains the path to the software (end in .exe), and the message you've sent, and the second only contains the command you've sent. If this work, well, I'll have to double check the release version.
bliblablub said:
You could just say at setup: Now turn off the phone and enter your other sim and start the setup again to detect the second sim
Click to expand...
Click to collapse
Yes, it's the basic idea (in fact, as soon as you insert your second SIM, you'll receive a SMS, but you'll then send an "allow" command to add this IMSI in the allowed IMSI list). I'm adding this.
Hehe, got the following error running the debugversion:
CmdLine (OK)
(empty)
Click to expand...
Click to collapse
Can't load DLL (OK)
\Carte de stockage\DSMPI.dll
Click to expand...
Click to collapse
Error (OK)
Can't register the message interceptor DLL
Please make sure the DSMPI.dll is in windows folder
Click to expand...
Click to collapse
Ok, my fault then, I've used French name for the path. Let me few hours to compile a new version with the regular name, I'll post back here.
Ok, I've added the "allow" command for multiple sim card. The idea is simple, configure your software as said in the first page, then change your sim.
You'll received a SMS to the number you've set up. Then send a "allow" command with your password, and the new SIM is allowed you'll never receive a SMS again.
bliblablub,
Please run the version you have on your storage card, and click "Zap" button to uninstall it.
Then delete the 4xxxxxxxxx_dfed_p (xxxxx is a hexadecimal number) from your storage card (file format changed).
Then download the updated DSMP.zip version from the main (or the official) page again.
There was a bug with the file path that should be fixed now with the release version.
Thank you for your patience.
popol256 said:
bliblablub,
Please run the version you have on your storage card, and click "Zap" button to uninstall it.
Then delete the 4xxxxxxxxx_dfed_p (xxxxx is a hexadecimal number) from your storage card (file format changed).
Then download the updated DSMP.zip version from the main (or the official) page again.
There was a bug with the file path that should be fixed now with the release version.
Thank you for your patience.
Click to expand...
Click to collapse
I can't uninstall it because it was not installed I guess (debug - storage). See errors on post before
Somehow I managed to uninstall the internal version. Needed several attempts.
Now installed again on phone and again nothing happens with whereRU and any other command except lcd turning on
Does it work fine?
Any opinion?
Nice, nice, nice. Sounds like the app I was always looking for. I will download and try. Thanks
It seems to work fine on my X1.
But gps is not recognized on port 4 baud 4800...
I SimUnlocked my phone using way maxrfon found a way around SE security. I went to x10unlocked.com and downloaded the program there and unlocked the phone. As far as I could tell the only time the software ever accessed the internet was to check if my login information was accurate as far as I could tell. So in the program there must be a way to see how it unlocked sim going through the security of SE, which is also applicable to bootloader unlock.
As a side note...there is a folder in the software folder that is titled loader...and in there, there is like a few .sin files that the program supports...and one of them is x10.sin, it is very small about 86kb. I don't know about programming or anything close to it. I though someone/developer might look into this and figure out how the program does this and then it could be used to bootloader unlock our phones.
Any thoughts/ideas.
how did you get the username & password? cause it won't let you go through without username & password ?
x10unlocked.com is where you download the program. You don't need to type in a username and password...The link is in the top of the page
Latest Client Version: 50.04 (12-07-2011)
Download Count: 9189
Download Latest Client Install 50.04
click on the last sentence... Download Latest Client Install.
When you install it and you are about to sim unlock your phone...you have to enter in a username and password...and that you have to buy. IF you do buy a sim unlock code what it does is unlocks your phone and it didn't install anything extra afterwards...so i am assuming all the files needed to unlock bootloader should be there without the necessity to buy an account. Of course you would need skills to reverse all that stuff.
i tried but it says check login'. where do i buy it from it doesn't say on the website?
Oh wow that is weird...it lets me download no problem... and i have no idea where to buy it...i got my account for free. maxrfon posted a few free a little while back but that post got deleted. IT should download. Why do you want to buy it...
Download Latest Client Install 50.04
direct link to download, works for me no problems
I deleted the post causeit had exactly nothing to do with gingerbread and was in the wrong place
so posting it in another wrong place isnt helping
My bad...general seemed like a nice place talk about it...sorry, but thank you for not deleting it.