Hello, I thought it was possible to load my XDA with the cable of my IPAQ 3850. So now I have a problem, because now I can't load my XDA anymore. Do you know an answer for this problem please help me.
Greets, Helmoed
I think you may have damaged your xda, the ipaq connecter is wired differently and introduces voltage to pins on xda that shouldnt have any.
Related
Hello, I thought it was possible to load my XDA with the cable of my IPAQ 3850. So now I have a problem, because now I can't load my XDA anymore. Do you know an answer for this problem please help me.
Greets, Helmoed
As I posted in your other question, if you have used an ipaq charger and now your xda wont charge, you have probably damaged the xda, the ipaq cable is NOT compatible, the voltage lines are different.
so is the pin assignment. isnt it crusingthru?
Yes pins are different, I had explained to the person asking the question in another post "xda wont charge" or something like that.
xda not charging
I have the same problem, I connected a gps connector (ipaq version) to my xda and after that my xda is not charging.
Is there some other way to charge the xda or a fix? What can be damaged? Where can I find documents to open my xda?
ok, i have opened my xda, but is it possible to charge my battery another way? Maybe with a wire directly on the battery?
Please help me
Mike
hi,
well my xda has been working perfectly fine since 7 months,
but recently i cannot charge it anymore,,,
even i have tried to change the adapter and the cradle with my friends working one.
still it does not charge.
what should it do and how.
HELP!!
g_archit said:
hi,
well my xda has been working perfectly fine since 7 months,
but recently i cannot charge it anymore,,,
even i have tried to change the adapter and the cradle with my friends working one.
still it does not charge.
what should it do and how.
HELP!!
Click to expand...
Click to collapse
Did you buy it new? If so it should still be under warranty so just send it in for repair, because it sounds like a bad sync/charge connector.
BTW confirming that you're getting your charge reading from
Start, Settings, System, Power and not relying on the charge light, Right!
HTH
Try http://forum.xda-developers.com/viewtopic.php?t=5448&highlight= I have a similar problem on my xda but have so far been unable to fix it.
Hope that helps
got fixed!!!!
guys,
after being in the dilemma to short the FO ,
i finally took to the mobile repair centre,,
over there the open the xda and checked every circuit via multimetre and
found that both the FO and other ic are working fine,,
so finally the problem was that there had been some carbon deposits over the jack from
where it charges,,,
got fixed and now its charging perfectly fine.
bye
Hello,
the folllowing thing happened to me :
- at a certain point i couldn't charge my xda anymore, and so the battery went down. no light appeared when connecting to the charger. and i couldn t start the xda anymore off course.
- i read the articles about the fuse which could be hit; and because i couldn't reach the spare fuse for the external battery, i simply soldered a solder bridge in the place of the fuse, as someone mentioned in another topic. i put everything together, but still, totally dead : no lights.
- now i don't know if this xda is totally lost or if i can do something about it. it could also be the charger which is broken. it doesn't get warm when i put it in the 'wall'. how can i check this ?
- if anybody has hints about what to do next or just trow the thing away, you could make my day ! many thanks in advance.
thomas.
You could try a usb sync charge cable, it maybe the battery has died completely also. Did you test the fuse before bridging the connection? Have you tried using the hard reset button, this is in the hole next to the headphone socket.
- i don't own such a cable, but maybe i can find it somewhere, as the qtek 1010 is not very widely spread in belgium, i could search over the internet instead of a shop.
- i did not test the fuse before removing it and soldering the bridge. which is probably quite stupid of me. the hard reset button didn't do anything and still doesn't.
- the battery could be dead also, but should'nt i see a light flashing when i insert my charger ? so my 'forecast' is that it could be a charger issue.
- maybe i could test it with someone elses charger here in belgium. i live in ghent, so if anyone is from near my place, i am willing tot travel to test your charger. i won't steal it, but then i can buy a new one over the internet. :wink:
if anybody has other testing methods for the charger, please let me know.
a simple question : should the charger get hot when plugged in ? because mine doesn't and i don't know if it ever did.
thanks for your answers ! and hoping to reanimate soon.
The charger would normally feel warm when plugged in.
err my charger's pretty cold actually...
Mine is too now that I checked but it gets warm while charging, my ipaq charger is warm when plugged in and not charging, any idea why this should be.
Can anybody help me with the following ?
i'm quite stuck in the thinking concerning the problem ...
is there anybody in europe who has a tech experience with the qtek 1010/xda and thinks he could arrange the problem i mentionned above ?
or is there anyone who knows such a person, because he had the same problem.
I want to let someone look at it, with, off course, a possible compensation in money. Is there anyone who could tell me how much this more or less could cost ? [because i am a student and use the phone mainly for testing purposes]
Thanks in advance !!! t.
Maybe a friend at college has a simple voltage tester you could use to test the charger output, the charger I have has a removable adaptor at the end of the lead, with this removed you are left with a simple barrel type connector which is very easy to test. If you cannot get a replacement charger and yours is faulty, send me a pm, and I will post one to you.
Anyone in europe who can repair my xda 1 ?
Hello,
i'm still stuck with a broken xda, as described above. Is there anyone in europe who has spare parts of the xda and is willing to repair this item ?
It would be great if anyone could help me. Please let me know what arrangments can be made. I am living in Belgium, Ghent.
thanks in advance.
thomas
Testing powersupplie
Hi!
I don't know if this could be helpfull, anyway: If you still think this is a charger-problem, then you could modify your cradle as described in the wiki. http://wiki.xda-developers.com/index.php?pagename=WallabyCradleMod
And another thing as well. I noticed that the main charger is making a loud fuzzing sound when connected to power, so I guess that if your's silent and cold, it might be broken. (Which is not too problematic as it can be easily bought on eBay.)
What power-connectors do you use in Belgium? I have a spare-adapter that I'm not able to use as it does not fit in the Norwegian connectors...
Good luck with the phone!
Same Problem after plugging in my ipaq 3970 gps reciever
I got the Same Problem after plugging in my ipaq 3970 gps reciever, anyone got a clue where to go with this??
iPaq pinouts...
The pin-outs is not the same on the xda and the iPaq, so power in the wrong direction may have damaged the mainboard. And that would be differcult to repair I think!
I recently bought a s3 to repair and resell.
The phone has 2issues
Broken digitizer
The usb port doesn't charge or is recognized by the pc.
Does anyone know how i replace the micro usb port?
What i know:
it's not connected via flex cable, is soldered to the board. so will need soldering
To replace i need a hot air blower, my soldering gun has that function.
Please tell me more
Sent from my GT-I9300 using xda app-developers app
that's pretty much it. desolder the old one, solder a new one on there.
Does anyone have good resolution pictures of the usb port on the motherboard, so i could know what im getting myself into.
Sent from my GT-I9300 using xda app-developers app
yes, use google. hope you're familiar with SMD soldering
maxcoliban said:
Does anyone have good resolution pictures of the usb port on the motherboard, so i could know what im getting myself into.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Here: http://www.ifixit.com/Teardown/Samsung+Galaxy+S+III+Teardown/9391/1
Good luck!
Glebun said:
yes, use google. hope you're familiar with SMD soldering
Click to expand...
Click to collapse
Dear Glebun and other users,
I'm thinking of replacing the Micro USB port on my black GT-i9300. I've had charging issues some time now. First I had to some ' tricks' examples: Turning off, getting it to charge then turn on. Repeatedly jack the cable in and out. Rebooting and what not.
However now it wont charge at all. When plugged in to the wall socket it just stays at the level it is (when not using and screen off) when plugged in and using it the battery drains. Also my laptop won't reconize the device. (also won't charge when pluggen in the laptop).
I got this phone from my brother who has installed Cyanogenmod on it.
Now what kind of equipement do I need exactly? And do I need to work with some anti-static armband?
I am more interested in how you plan to fix the digitizer and make money on it?
Hi,
I have a problem with my phone, and I think it's the micro-usb port
The problem is , I try to connect chargers, I tried a few already, and when I plug them, nothing happens, unless I play with the cable to a perfect position, but if I move the phone a bit, the charging stops.
is the corrosion on the micro usb? or is it because the port became wider and wider over time and the plug does not fit well?
if it's corrosion, can I use something like contact cleaner? or any way to solve that?
thanks all!
Best way is send for repair. If you've tried multiple cables its definitely the port. Best to replace the USB port
Sent from my GT-I9300 using Tapatalk 4 Beta
I have the same problem. Send to Sam and they actually change the entire motherboard for me.
Sent from my GT-I9300 using xda app-developers app