Greets gang,
I see other threads about sendmail but don't see anything that specifically addresses my question:
Is there an SMTP server for T-Mobile wireless Internet customers? The tier one tech didn't know what I was talking about, and the tier two tech said they don't provide one because they're not an ISP. Hmm, as near as I can tell, they're Providing me with Internet Service.
So, does anyone know of either an existing T-Mobile SMTP server that I can use (without authentication, since the Inbox app doesn't allow different credentials than the POP account), or an open-relay SMTP server? I tried smtp.o2.co.uk, no workie.
Thanks,
Chris
I know that if you setup any e-mail accounts in their T-Zones, you can use the SMTP server of myemail.t-mobile.com to configure your standard e-mail client. So I assume that you should be able to use this as well. Give it a shot. I've never tried it since I have my own mail servers.
Thanks Arkhangel, that did the trick.
For others wishing to send mail from their T-Mobile PocketPC Phone Edition
Step 1: Go to the T-Mobile website, log in, and click "My E-mail" (down near the bottom once you're logged in). Add your POP3 mail account.
Step 2:
On the Pocket PC, in the Inbox account settings, set your Incoming (POP3) server accordingly with user ID and password. Set your Outgoing (SMTP) server to myemail.t-mobile.com. Click Options and then Next (Options 2/3 page) and ensure that "Outgoing e-mail server requires authentication" is NOT checked.
8) Thanks to both hypr & Arkhangel !!
This works on my XDA as well.
As I don't have the $19.99 month internet plan with T-Mo - so I can't use internet2.voicestream.com or internet3.voicestream.com - they simply don't work for me.
I use my T-Zones GPRS instead - wap.voicestream.com (note it is set up in connections manager w/ everything set to work, won't work any other way) - its slow but still works. I am only limited to 1 Mb / month (included in the plan) but that is all I need. If I need heavier use, I switch over to my own ISP dial up account and use CSD (eats minutes I have to burn as well, unless it is the weekend - then its free :wink: ).
Thanks again!
JB
jmbneaf: T-Mobile recently changed their T-Zones options. Instead of having the 1MB limit, it's now $4.99/mo with Unlimited Access. If you use it a bit, might want to check it out.
Thanks!
I may just do that...
-JB
Related
This is a common question from corporate users, and the answer can be difficult because of the various ways that your network and server(s) may be configured. In this brief article I will try to touch upon the basic principles and give you enough information to at least understand what your specific configuration is and what needs to be changed.
First off, let's clarify some terminology:
Sync: To synchronize data, typically meaning mail/calendar/tasks. Outlook and Exchange have a special proprietary connection which keeps data synchronized between client and server. There is no true Exchange client for the Pocket PC.
POP3 & IMAP4: These are industry standard mail protocols. IMAP is a sync protocol.
Firewall: A device that blocks specific TCP ports (think of them as specific internet services like mail, web, FTP) from being accessed on your internal servers from the internet. A firewall is configurable for specific needs and access.
VPN: Virtual Private Network; a software layer that is established between two points on the internet and provides for secure data transfer. This is typically between a laptop/home user and a firewall device at a company. This basically "punches a hole" in the firewall for the authenticated VPN client user.
Active Directory: This is an authentication protocol used in 2000 Server, Exchange 2000, and newer. It can also run in "mixed mode" if you have older servers (IE, NT).
MIS: Mobile Information Server; this is software from Microsoft which allows you to do a full remote sync with Exchange. It will sync mail/calendar/tasks, but it takes much more time and data. This is generally impractical unless you have a large data transfer budget or have very little data to sync. MIS can NOT be run on a mixed-mode Active Directory installation nor on the old NT authentication scheme. You need to use it with native mode Active Directory only.
Now the absolute easiest way to sync your PPC e-mail is via IMAP directly to the Exchange server. To do this, your firewall needs to have the IMAP ports open between the server and at least the subnet of your wireless carrier. The ports are 143, 220, and 993. You can find out your carrier's subnet range by calling them, or by running vxUtil on your device while you have a connection and getting your IP configuration. Your Exchange server needs to have IMAP enabled, which literally takes just a few clicks. Any Exchange admin can do this in a few minutes.
On the Pocket PC, open the Inbox, tap the Services menu, New Service... Enter your e-mail address in the box, and press Next. Skip the automatic testing. In the next dialog enter your user info such as your real name (as you want it to be in the "from" field), your login name (typically [email protected], same as your e-mail address), and password. Hit Next, and select IMAP4 service type, then enter a name for this account (any name you want, this is for you to remember which account this is), hit Next. Here you will enter your mail server names. Typically this is mail.domain.com, but ask your IT department. Tap the options buttons and select "Outgoing mail requires authentication" then hit Next. Set your preferences here, hit Next twice, and you're done.
The only drawback to this method is a very slight security risk which can be averted by keeping the latest service packs on your Exchange server. This is the methodology I use and recommend, and that all of my clients use. I do not know of any specific security risks with IMAP, and find that most objections to it are based merely on FUD (fear, uncertainty, doubt). Unfortunately, FUD plays a big role in many IT decisions. The other factor is the nerds; they want to do lock things down just because they can or think they should. IMAP is a proven, secure, industry-standard protocol that is well-implemented on Exchange server 5.5 and above.
You can also use POP to get your mail. The drawback is that POP is not a sync protocol like IMAP. People using POP tend to run into issues with not knowing whether an e-mail is on the server or has been removed to a client. This makes it undesirable for the non-technical business user. The ONLY caveat for IMAP is that you should sync again after you've done anything with your e-mail to make that change to the server. IE, if you delete an e-mail on the client, it will not be deleted on the server until you sync again.
Now if your IT department refuses to allow outside access directly to the Exchange server, you may need to establish a VPN to the firewall. To do this you will need client software, and this is more complicated than what I'd like to discuss here. The best starting point is to ask the manufacturer of your firewall for a recommendation on a Pocket PC VPN client. Once you connect the VPN, then you can use IMAP as outlined above to get your mail. With a VPN, it will work just as if you were in the office.
Speaking of which, you can test these things using the pass-through function of ActiveSync while the device is in the cradle at the office. This will help you determine the source of a problem, for example. If you can connect in the office but not wirelessly, then you have a proper e-mail configuration but you have a network/firewall issue.
Please feel free to shoot any specific questions my way. However, this is meant as information you can use to guide your Exchange and firewall admins and not a complete how-to for the novice. If you do not have admins on site, someone will need to configure this. You can contact any qualified Exchange and/or firewall admin to help you with this, and I'm also available for implementation, design, and consulting work. My background is in wide area communications, security, and internet services.
Can anyone help me in the steps involved to remotely connect to my
microsoft exchange server 2003 remotely with GPRS T-mobile?
This is what I have working so far and each one has been incredibly
painful to set up, but working.
I have windows 2003 server running exchange 2003 server on a DC, and an
I-mate Jam running windows mobile 2003 2nd edition.
Working:
1) My ISP is T-mobile and running GPRS perfectly.
2) OWA (Outlook Web Access) is working perfectly from my lan computer.
ex. http://mail.manster.com:81/exhange
3) OMA is working perfectly from my phone.
4) I set up activesync 3.8 to be standard and connect to my exchange
server and that works perfectly if I put the netbios name
manster-4qgshpl.manster.local in the server name. Everything syncs fine
and it works. The passthrough on my activesync says to connect to
"internet" and I have pda connected to lan comp.
Not working:
1) I put my exchange server smtp name mail.manster.com in my activesync
and it no longer works.
What am I missing, I'm so close. Do I need to create a vpn or
something. How come I don't need vpn for owa and oma?
Note: When I change the exchange server to mail.manster.com and put
"work" in the passthrough it works but only when I have it connected to
computer. I also have to put for some reason mail.manster.com in the
proxy server and port 81. Even though I don't have proxy server. I need
to be able to do this remotely from anywhere with GPRS.
Thanks, I greatly appreciate any help.
We have a number of Pocket PCs some sold as “Siemens SX56 from ATT” and some as “Pocket PC Phone edition from T-Mobile”.
We were using them on the internet to read E-mail from Novell GroupWise Web access E-mail.
All was fine until we added 40 bit Encryption to our Web access E-mail at which time all of the Pocket PC’s stopped receiving E-mail. They will try to go to the login screen but just sit there with the little earth icon spinning and then stop with the error ”The page you are looking for cannot be found“.
The GroupWise Web site still works for the people that are using an iPaq or a PC on the internet.
Is there anyone out there that has an idea of what I need to do to get my Pocket PCs working again?
bapglnet said:
]Novell GroupWise Web access E-mail.
Click to expand...
Click to collapse
Hi bapglnet,
GW Web-email system uses standard encryption protocol SSL over http. So, you need to use your company's webmail address to login to your mailbox!
If you were using traditional WinMobile email client, then check for SSL connection check box in Accounts->Accounts...->[pop3]->...Next...->Options...
OR compare your email settings with those guys who have iPAQs
FINALLY,
ask your system administrator for webmail login address OR pop3 settings
Hey guys,
I was wondering if anybody has the blackberry software running on the xdaII with tmobile US? I know theres a specific rate plan you have to get with it, but does it allow you to browse the web with it also? What apn's are you using to do both, mail and web? How well does it work and where can I find the app?
thanks
I am using it on an XDA II on t-mobile. I hav the Blackberry minutes and mail plan that is essentially $19.99 for un,imited data and SMS messages and 59.99 for 1000 anytime minutes. As far as the Blackberry Client is concerned, I am use the Blackberry Web Client (BWC). Have not activated BES side yet. Here's my "good" and "bad" lists on the BWC side:
GOOD
1. Excellent, super fast, very reliable basic messaging.
2. Allows you to auto forward and consolidate multiple e-mail accounts and have all messages forwarded to your device
3. Allows you to specify what return address you want the recipientto respond to.
4. Allows you to make the reciepient think that the message is coming from a different e-mail address than your tmo web client address. For example, I have a RIM pager and use that address as return address on XDA. Everyone still thinks I am using the RIM device, when in fact everything is being doen to and from the XDA.
BAD
1. Have not been able to download or open any attachments
2. Clinet does not automatically open the next message, like it odes on regular e-mail. makes you open each message manually.
3. Move message function does not seem to work i.e. you can delete a message, but you cannot seem to be able to move a message to say an archive folder.
4. The client softeare is not integrated with the "Sounds and Notifications" settings i.e. the balckberry client does not show up under the "sounds and notifications" menu, making it imposible to set any kind of audible, vibrating or flashing light alert when a message comes in. All you have is a very short and quiet "beep" when a new message arrives
I can still browse the web, but some sites are not as assessible as they were under th normal data service. For example, I cannot run he Smartner client anymore. It may be possible to add a second APN for regular data, but TMo tech support put me off trying this as they said it would creat a conflict.
All in all I am pleased with the software as I have now been finally able to retire my RIM ipager and now have everything on one device! :lol:
And oh yes, where do you get the software? Its part of the latest O2 ROM image. Download and install 1.72.181 ROM for the O2 myxda website
Hope that helps
Regards
Chris
thanks chris,
So to be able to browse the web, Im gonna need the 19.99 data right? I guess thats why the web wasnt working for me, I got the blackberry app to somewhat work but the web was a no go. Thats what I was afraid of, I definitely do not want to add another 19.99 to my plan.
Thanks for confirming the info with me.
Ben
Hi Ben
I am actually able to browse the web using the Blackbery APN (blackberry.net). I also had some success with APN: wap.voicestream.com. TMo have had some network issues recently that have interupted the Blackberry service. I have called tech support and they had to reprovision the account, which fixed the problems. I would give them a call, say you are having issues with web access and then ask them to reprovision the account for you. You should be able to reach most sites. My issues were more with accessing data and relay servers and services (a la Smartner, iAnywhere etc) than regular web sites.
Give that a try and see if that helps. Let me know how you get on
Regards
Chris
Ben
One more thing. You may be doing this already, but if not, make sure that you "stop" the blackberry software before you launch internet explorer. That way you will disconnect the blackberry connection and allow the XDA to start a new data connection under either APN: blackberry.net or APN: wap.voicestream.com (whichever you have setto default) Once finished with the internet you can stsrt the blackberry messaging client up again.
Regards
Chris
chris,
When u were able to access wap.voicestream.com and the blackberry.net, did you always have the 19.99 data option on your rate plan? I was just using the wap.voicestream.com apn since I only had tzones, but since I'm using the xdaII, I was always able to view html pages. Tmobile has now blocked port 80 if your not paying for the 19.99 data package. So I was just wondering if you always had 19.99 data option.
thanks for the help.
ben
Hi Ben
No, I was able to access it after I switched over to the blackberry plan. They disabled my regular data plan first and then activated the Blackberry plan. Tech support said that I should be able to "access most web sites" which appeared to be correct, aside form some of the network problems TMo had as mentioned earlier.
Regards
Chris
How did you guys get the software on your device? I am thinking about buying an XDA just for this. Right now I have a siemens sk65 coming in but I would love to get back to a pocketpc
Hi StingOr
The Blackberry software client is built into the latest O2 ROM (1.72.181), so if you get the O2 XDA 2 and load that ROM, then you would be good to go.
Regards
Chris
All,
Trying to figure out what is the best way to setup your network connections on WM6 roms. I'm currently a Tmobile user in USA. The data plan im on, uses a proxy server. So it created an interesting problem if any expert out there can figure this out. HEre goes:
network wizard creates : Tmobile Data, Tmobile mms, on top of the My work network (empty setting), My ISP. None of them uses proxy.
Ok then I went ahead added the proxy into Tmobile Data config then IE works, push mail works from mail2web. AOl emails,YAHOO emails, weather ...etc stops working cuz the proxy.
Ok I decided to play with network management settings like a lot people suggested: I picked My work network (empty setting) as internet, Tmobile Data as private network connect. Now AOL,YAHOO ...etc anything cant use proxy server works, but my IE and PUSH mail fails.
My question is are there ways to tie connection to each application? actually tie into each mail account.
I remember there use to be a skipping proxy cab somewhere, I'm willing to try that cab if someone has it. I just need proxy to be transparents to some mail accounts and maybe applications like HTC weather.
Thank you. Let me know if I confusses everyone.
All,
Ok i did a partial fix.
Changed all the aol,yahoo, accounts to use work connection.
push mail can only use internet connection which has to have proxy. now that my sync doesnt like it, will fail with unreachable sever during sync because of the proxy. More digging. I know there are more tmobile web users out there. anyone has other suggestions?
I have an AT&T Atrix, running gingerbread.
What are the correct settings to get Verizon email going?
The automatic method does not work.
Thanks for any help.
jesgrew said:
I have an AT&T Atrix, running gingerbread.
What are the correct settings to get Verizon email going?
The automatic method does not work.
Thanks for any help.
Click to expand...
Click to collapse
Forward your Verizon email to your gmail account.
jesgrew said:
I have an AT&T Atrix, running gingerbread.
What are the correct settings to get Verizon email going?
The automatic method does not work.
Thanks for any help.
Click to expand...
Click to collapse
Same problem for me. I think im going to call Verizon and have them walk me thru, cuz my gmail account won't even load my emails, so no point forwarding. If I get the correct settings, ill post for you.
Sent from my MB860 using XDA App
pre4speed said:
Same problem for me. I think im going to call Verizon and have them walk me thru, cuz my gmail account won't even load my emails, so no point forwarding. If I get the correct settings, ill post for you.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Here is what I have done, that works: installed K-9 from the market.
It does work. A bit over whelming with all the choices and settings.
Gmail works but I do not want to link Verizon mail with Gmail.
I even tried to use the server settings K-9 uses, for the native email settings on the Atrix: That did not work. The settings on the Atrix are different.
Played around interpreting the wording differences.
THIS DID WORK for incoming!!
Verizon server settings that work on my AT&T Atrix:
Incoming server:
incoming.verizon.net
User name: your email name without the @verizon.net
Password: your email password
Advanced settings:
Port 110
Use secure connection: NO
Use secure password TLS: Never
Authentication: Password
Verify certificate: NO
worked!
Outgoing: Still trying to figure this out.
Help me out, or stay tuned!
Till then, I can read incoming only.
jesgrew said:
Here is what I have done, that works: installed K-9 from the market.
It does work. A bit over whelming with all the choices and settings.
Gmail works but I do not want to link Verizon mail with Gmail.
I even tried to use the server settings K-9 uses, for the native email settings on the Atrix: That did not work. The settings on the Atrix are different.
Played around interpreting the wording differences.
THIS DID WORK for incoming!!
Verizon server settings that work on my AT&T Atrix:
Incoming server:
incoming.verizon.net
User name: your email name without the @verizon.net
Password: your email password
Advanced settings:
Port 110
Use secure connection: NO
Use secure password TLS: Never
Authentication: Password
Verify certificate: NO
worked!
Outgoing: Still trying to figure this out.
Help me out, or stay tuned!
Till then, I can read incoming only.
Click to expand...
Click to collapse
I went and got the settings from my email program on my computer and they didn't work. Ill give Verizon a call later.
Sent from my MB860 using XDA App
Mail server settings
Incoming mail server (POP3): incoming.verizon.net
Incoming Server Port Numbers: 995
Outgoing mail server (SMTP): outgoing.verizon.net
Outgoing Server Port Numbers: 465 Why is this important?
Your Verizon Online user name
Your Verizon Online password
Make sure "This server requires a secure connection (SSL)" is checked.
treehumper said:
Mail server settings
Incoming mail server (POP3): incoming.verizon.net
Incoming Server Port Numbers: 995
Outgoing mail server (SMTP): outgoing.verizon.net
Outgoing Server Port Numbers: 465 Why is this important?
Your Verizon Online user name
Your Verizon Online password
Make sure "This server requires a secure connection (SSL)" is checked.
Click to expand...
Click to collapse
So odd, I have incoming working great.
But with different port settings.
My problem is the outgoing.
I love this better than the K-9, or Gmail app.
Outgoing has lost of odd settings.
Most do not work so help me out.
Please
treehumper said:
Mail server settings
Incoming mail server (POP3): incoming.verizon.net
Incoming Server Port Numbers: 995
Outgoing mail server (SMTP): outgoing.verizon.net
Outgoing Server Port Numbers: 465 Why is this important?
Your Verizon Online user name
Your Verizon Online password
Make sure "This server requires a secure connection (SSL)" is checked.
Click to expand...
Click to collapse
Unfortunately these settings did not work for me. Would not sync at all.
Sent from my MB860 using XDA App
Success!
Got VERIZON Email incoming and outgoing working on the Atrix AT&T.
Go to settings
Go to accounts
Add email account from menu
The auto method never worked for me, so un select Automatically configure account.
Hit next.
Create account named Verizon, or what ever.
Add your data.
As you proceed thru the rest of the settings use the data below.
Verizon server settings that work on my AT&T Atrix:
Incoming server: incoming.verizon.net
User name: your email name without the @verizon.net
Password: your email password
Advanced settings:
Port 110
Use secure connection: NO
Use secure password TLS: Never
Authentication: Password
Verify certificate: NO
Outgoing Server
SMTP Server: outgoing.verizon.net
User name: same as incoming - your email name before @verizon.net
Password: Same as your incoming password
Advanced
port: 587
Use Secure connection: NO
Use secure password [TLS]: AUTO
Authentication: AUTO
Verify Certificate: NO
Be sure to select "OK" before you exit each screen, all the way out.
Send a short email to check your settings.
jesgrew said:
Success!
Got VERIZON Email incoming and outgoing working on the Atrix AT&T.
Go to settings
Go to accounts
Add email account from menu
The auto method never worked for me, so un select Automatically configure account.
Hit next.
Create account named Verizon, or what ever.
Add your data.
As you proceed thru the rest of the settings use the data below.
Verizon server settings that work on my AT&T Atrix:
Incoming server: incoming.verizon.net
User name: your email name without the @verizon.net
Password: your email password
Advanced settings:
Port 110
Use secure connection: NO
Use secure password TLS: Never
Authentication: Password
Verify certificate: NO
Outgoing Server
SMTP Server: outgoing.verizon.net
User name: same as incoming - your email name before @verizon.net
Password: Same as your incoming password
Advanced
port: 587
Use Secure connection: NO
Use secure password [TLS]: AUTO
Authentication: AUTO
Verify Certificate: NO
Be sure to select "OK" before you exit each screen, all the way out.
Send a short email to check your settings.
Click to expand...
Click to collapse
These settings also didn't work. Guess im just not meant to get my main email on my atrix.
Sent from my MB860 using XDA App
Notice! K-9, free App in the market, will automatically set up your Verizon email account on your phone.
As far as manually setting up Verizon settings on the Atrix:
Be sure to select "OK" or "Yes" after you make changes to any of the settings pages before you exit that page or the changes will not be saved.
I live on the east coast donno if there are different settings for other area's?
My Atrix is stock, but rooted, if that makes a difference.
The method used was trial and error using lot's of other " setting suggestions", until I got the incoming to work. Applied the same method to the outgoing.
Create a test email, send it to my gmail account, wait for either failure notice, or gmail to say success.
If you get past the "Wrong user name, or password failure" notification, do one server at a time till you get it going.
I like the stock android email application a lot better than K-9 from the market.
Just too many settings in K-9, but to each his or her own.
Good Luck! My phone email signature now say's: Verizon Email sent from my Motorola Atrix on AT&T.
Not sure if east versus west is the difference either. Maybe. Don't know. Im same setup as you stock but rooted. I tried the k9 and while it would get my emails, it wouldn't show me all new ones. Always was one message it didn't show and just happens to always be a vip message. Im gonna have to stop being lazy and call Verizon from a separate device. Thanks for all your help.
Sent from my MB860 using XDA App
You can set the number of emails downloaded in K-9, and how often