Hi,
I want to configurate the rom of my PochetPC 2002. Is romkitchen a
way to do that. All I found was a webpage(yorch.net) where you are possible to download rom´s for xda.
Thank you for your help,
Michael
hhhmmm if you want to make your own rom
then yeas the romkitchen at yorch.net does just that
the kitchen have the roms you dont have to supply the rom yourself
and if you want then no you cant
you may want to read this
http://xda-developers.com/phpBB/viewtopic.php?t=1624
because if you dont do it right might end up with a rather expensive
doorstop
Related
Hello, I can read a LOT of roms and technical information but after all, a lot of qtek2020-users still can't upgrade to WM2003SE because some things are too difficult or too technical. Is there someone who can upload a complete setup-file so everything is set for the QTEK 2020 and no more changes like country-codes have to be done and WM2003SE can be installed without any problems?
Thanks in advance.
Sorry Mate that wouldn't work because that would require many diffrent ROMs to be uploaded and that would also require many server space.
Beside that you have to know which ROM to you use. So you should go a little bit technical anyway.
And it is not that diffecult as you think. Because DCS has even made a batch file to make the changes to the ROM. The Only thing you've to do is provide your provider to the batch file.
The following thread contains verything you need.
http://forum.xda-developers.com/viewtopic.php?t=13588&highlight=
Regards,
Mark
do you want to try this ftp://gate.egaleo.gr/pub/wm2003se_qtek.rar
Thanks for the info. I'll try it.
Hello everybody, I tried a lot of roms from all the developers from this forum.
Now I would create my own ROM, but I don't understand how to start.
Could someone help me in this adventure?
here is a good way to start
try using my nanoscopic kitchen then you'll see what is needed to coock a rom
http://forum.xda-developers.com/showthread.php?t=327225
then you can start to use the hyper core kitchen and start dumping roms to rebuild
The BIG Gullum!!!
Thx so much for all of your job. I will try to read your instruction.
Gullum, how can I get the OS.nb file? I mean, with Nanoscopic I will able to add/remove some apps from the ROM, but the OS will be still the same, isn't it?
divxmaniak said:
The BIG Gullum!!!
Thx so much for all of your job. I will try to read your instruction.
Gullum, how can I get the OS.nb file? I mean, with Nanoscopic I will able to add/remove some apps from the ROM, but the OS will be still the same, isn't it?
Click to expand...
Click to collapse
yes you will need to use hyper core for dumping new roms but most new roms the rgu files(registry settings) have been removed... so it's verry hard to make roms out of the never roms.
but you can use my kitchen to learn and you can also find lots of oem packs on this forum that you can include in the oem folder of the kitchen
It means that I can only add or remove some cabs file?
But how you can create a ROM from the beginnings?
I think that is not possible for me to change the ROM in the deep
An easy question: how can I change the ROM theme, or dialpad?
My friend Gullum i´m portuguese can you help me because i would like to learn about to change ROM for portuguese language is ti very dificult?
Hi all,
I made this manual in order to help people like myself to better understand ROM cooking basics.
It was ment to be used for Prophet ROMs, but since it uses HyperCore Kitchen, it can be practicaly used for any WM6 ROM.
Please be free to post your comments and/or suggestions.
NOTE: This manual reffers only to "old" way of ROM cooking (first downgrading to WM5, and then flashing to WM6)
If you find it useful, please vote.
Thanks to:
Gullum (for great ROMs)
Anichillus (for great Kitchen)
Cloudyfa (for Step1 ROM)
phnikola said:
Hi all,
I made this manual in order to help people like myself to better understand ROM cooking basics. Hope you will find it useful.
It was ment to be used for Prophet ROMs, but since it uses HyperCore Kitchen, it can be practicaly used for any WM6 ROM.
Please be free to post your comments and/or suggestions.
Thanks!
Click to expand...
Click to collapse
No, thank you!! I will look into it.
me too
i like this
Thanks for your effort, this is a really good guide.
I just wanted to ask is there a difference between ROMs built this way and ROMs that we flash using new Hard/SoftSPL method.
I saw nb2nbf tool, so is it possible to just convert OS.nb file and flash it using new method or is there some more work that needs to be done?
thank you
I really need it !
Ill check it out this weekend! Seems like fun to me
I have red this guide and it is very clear, very thourough and a big help to anyone starting to cook! THANKS!!
(@ allothers that are missing some extra's: it is NOT an advanced course! So, don't complain but take an example and publish your own knowledge and experience this way. Then everyone can benefit)
Initiatives like these are giving back the original gaoal of this website, it isn't called "xda-developers" for nothing.
Perhaps someone can make a tutorial for skinning standard OS-parts (commanager, dialer, calculator, etc...) Or how to translate your favorite ROM to your own language?
you can't use this way to create XIP from Shadow's ROM, Crystal V5. ROM or from Korand's ROM.
If someone can make this XIP.. Could anyone share the file...
with that file. I can make a new ROM based on new OS..
varanusvincent said:
you can't use this way to create XIP from Shadow's ROM, Crystal V5. ROM or from Korand's ROM.
If someone can make this XIP.. Could anyone share the file...
with that file. I can make a new ROM based on new OS..
Click to expand...
Click to collapse
Never flashed any of these ROMs you specified - so if their XIPs can't be dumped using Dump XIP tool from the HyperCore Kitchen, than I won't bother with them. Let me add that ROM cooker can also remove RGU files from ROM before posting, making it very difficult for someone to modify it. Then I'll skip such ROM too.
But...
FACTS
- This manual was intended for beginners.
- When you are a beginner in ROM cooking you don't like to be confused, but want it all to be clear to you before you do anything to your expensive device.
- I see that you are using modified Touch ROM, which can be dumped with this method.
- I also use modified Touch ROM, but I will not post it - there is enough good ROMs out there already
Cheers!
Hi All - my first post
Thanks for this Phnikola, I'm brand new to all this (smartphone) stuff and need a place to start. Looks good so far.
My TC500 never was in the shops, has no support and no official upgrade path (hmmm...) but there are a few cunning points concerning SIP and home landline "awareness" in the original ROM I'd like to take with me up into WM6.1 (got Cloudyfa's Shadow 2.0 TE ready to go).
Any1 have any good advice for me?
Thanks again
_________________________
TC500 G4 HTC Prophet
IPL: 2.58.0001
SPL: 2.58.0001
GSM: 02.19.21
OS: 2.58.20.21
Work on dopod 818 pro wm 5?
i want to upgrade rom and wm6
thanks...
black_shadow69 said:
Work on dopod 818 pro wm 5?
i want to upgrade rom and wm6
thanks...
Click to expand...
Click to collapse
Yes it does, but you don't have to cook your own ROM. Just wonder around a bit on this forum and pick a ROM that suits you.
Dear phnikola
Thanks a lot for such nice guide... I was trying to use HyperCore kitchen for last 4 hrs but was not able to pass step 1 of extractiong Os.nb
Your guide is really good & helpful
hi phnikola,
just wanna said that nice guide n great contribution. Maybe more images would help the word "for beginners", hope in your next version of manual..
your contribution really apprieciated...
thanks
clustered said:
Maybe more images would help the word "for beginners", hope in your next version of manual..
Click to expand...
Click to collapse
believe me..if one just read this guise patiently.. he won't find any need for pictures...
I was complete beginner.. and this really helped me in extracting 2 ROMS and cooking a customized taking best from boths.
hellow sir i want to make sure if my pda is G3 pls.. Reply
IPL:1.00
SPL 2.g3.4pda
GSM 01.13.20
OS 7.0.0.7
Hai everyone,
I would like to go and build a rom myself.
I've been reading the forum a lot, but still have no clue where to start.
I want to make a dutch rom based on the official HTC WM6.1 rom.
I would like to recieve some tips and tric on how to start making a rom.
I know how to dump a rom and how to reconstruct it.
Now i want to know what tools and programs i can use to modify the rom.
For example how to remove programs and how to add them..
So i able to make a start and go my way from there.
Needless to say i will release the rom on the forum as a return of favor
Hope someone will give me some tips on how to start.
哈哈.看不懂.你想做说什么啊?
hello ive got th iolite
but i dont know if i can use the tools that i also use for my blackstone to make the romdump?
and can i use the same kitchen as for the blackstone??
hi,
see here
This is by the Jade forum. but I think it should work also for you.
thank you going to give it a try
miniterror said:
thank you going to give it a try
Click to expand...
Click to collapse
Did you have success?
just saw that my comment was ereased
i didnt have succes because i didnt tryed it
i wanted to make a dump of the dutch rom but is already on the site
so i thiought a dump wassnt nesecary any more
Hi, i got a dutch Iolite and right now i am trying to find out how to swap to an english ROM. But somehow it is quite difficult to find kind of a step-by-step explanation in this board.
I guess before trying any kind of flashing action i should first dump the ROM I have installed, to go back in any case.
So i downloaded those ITSutils but procread just crashes with a 'RAPI.dll was not found" error. Well, i will check for that later in the board, but in general... What should i do to dump the ROM?
I am supposed to plug it to a pc via usb? If so, using which drivers? Do i need to open that windows mobile cd i got with the phone?
Because if i would not need it, i would keep it closed until I decided wether to keep the phone (in english) or to sell it again when it has to stay in dutch.
Thanks for any help, because I really did not find what i was looking for within the wiki or that board so far. thanks
I find this topic very confusung too! :-/
For maybe being of help for other people:
- the RAPI.dll not found error is gone, when Active Sync 4.5 is installed at the host-computer, then there are also no further drivers needed
- smartphone has to be attached via usb in the activesync mode
The thing is this:
Nobody explains that right!!!!!!
Sorry maybe i'm a fool!!!!
I think is more easy wait a original ROM upgrade from HTC......
Eduardo
The real interresting question here must be; how to backup / dump my existing ROM to .nbh?
That way it wouldent be so scary to try the different custom roms here, and allso it would be very easy to share our ROM's.
Dump it to RAW, then use "Visual EviusKitchen" - ExtraButtons - Raw2NBH
Dumping programm: HERE
Kitchen U find in forum too, must use sefu
Greetings