I would like to remap the answer button on the wired headset to activate the MS voice command software.
Is there any way to do this?
Has anyone attempted to do this on Windows Mobile 2003 ver?
Any ideas and hacks would be appreciated.
Thanks,
guru
as i understand then the pickup and slamdown for phone buttons cant be remap'd at all
but i suppose that if you made a program which checked the event that that it recieve a call would autostart a program of your choice
maybe somebody already made such a program
i dont know maybe
Related
I have installed and am able to use Voice Command on my TyTN via bluetooth. I can activate the Voice command from my headset, but I have to speak the command into the phone. How do I make the registry change to use the bluetooh headset for voice command? Please explain to me in Noob terms, as far as changing the string and what not.
I've searched but can't make heads or tails of how to proceed.
Thanks!
Hello all. Before tweaking to DCD 3.1.2, Voice command would announce incoming messages and callers. Now, with dcd, the actual ringtone is played over bluetooth headset and no announcments are made. any thoughts on how to eliminate ringtone being played over bluetooth and have announcments made again? Thanks folks. You guys rock!
mine acts different...i get ringtone in my headset and it announces who calls over ringtone in my headset, also my phone vibrates but doesnt ring.
i wish there was an easy way to configure the settings cuz i would like for my phone to vibrate and ring out loud (im not always wearing my bt headset 24/7 when bt is enabled) and i want my headset to announce so and so is caling or the number if its not in my phonebook.
i also notice when in a call it announces who is calling in for call waiting which is cool
Ring and voice command
Not only those problems but, I have no options for voice commands. I can't set them up use them or even find a icon for them. I am also missing a lot of just standard options. There are no personal settings there is no where to Finnish the GPS setup. I am getting a little tired of running a rom that has absolutely nothing in it. I understand that you should be able to do more with a dcd rom but I don't understand how you are supposed to utilize these options when they have been forcefully removed from the OS. If anyone knows where I can pick up the stock voice command prog, the stock MSN messenger, and how to replace the missing personal settings tab and the slide sound tab. That would be helpful.
Not only those problems but, I have no options for voice commands. I can't set them up use them or even find a icon for them. I am also missing a lot of just standard options. There are no personal settings there is no where to Finnish the GPS setup. I am getting a little tired of running a rom that has absolutely nothing in it. I understand that you should be able to do more with a dcd rom but I don't understand how you are supposed to utilize these options when they have been forcefully removed from the OS. If anyone knows where I can pick up the stock voice command prog, the stock MSN messenger, and how to replace the missing personal settings tab and the slide sound tab. That would be helpful.
Click to expand...
Click to collapse
First of all, dcd's roms are meant to be cooked clean. That's why UC compatibility was added. Lots of people got excited when it was first added, but I've seen very very few people actually utilize it the way it's supposed to. Before I go on I have to ask...are you cooking your own rom using the kitchen, or are you using the precooked rom that is posted? If you're using the latter, then NOTHING besides the essential functions will be installed. It's a clean precooked rom and nothing else.
That being said, if you're cooking your own rom with the kitchen, there's a few things you should know...
Voice Command does not come stock with the phone. It's a third party application from Microsoft that costs roughly $40. There isn't an option for it in BuildOS, so unless you have it and you're installing it via a cab (the way I recommend), or through an OEM, then you will not see any options for it, as it is not installed. If you're referring to Voice Speed Dialer, that's a whole different program. There are no options for it. You have to manually record yourself speaking the commands.
Sliding Sound has to be added using BuildOS. If you're not checking it off prior to cooking the rom, then it will not be included in your rom.
I don't use MSN messenger, but I'm going to guess that Windows Live is what you're looking for? If so, Windows Live also has to be added using BuildOS.
I'm not sure what you mean when you say "Finish the GPS settings". Could you clarify?
As far as your personal settings tab goes, that is a valid problem and we would have to speak further in detail for me to diagnose it.
MS Voice Command: Definitive Guide Thread...
http://forum.xda-developers.com/showthread.php?t=391262
P.S. had the same problem, got the 1.6.19209 version listed in that thread, now voice command talks right over the ring tone and I get the best of both worlds.
i dont use voice command really, but i noticed after the update that my phone no longer physically shows the contact or number of whos calling when my phone rings.
It just says
Verizon Wireless
Incomming Call
Then the rest of the box is blank.
Anyone know how to fix this? I didn't run the verizon cab, but with 3.1.2 i didn't think i needed to? Especially since it still says verizon wireless when people call, and i can call out/send sms
I didn't run the verizon cab, but with 3.1.2 i didn't think i needed to? Especially since it still says verizon wireless when people call, and i can call out/send sms
Click to expand...
Click to collapse
Please read more. All 3.1.x roms REQUIRE the carrier cab to be installed. It says it in clear text right on the first page of the kitchen thread.
ROM requires a carrier cab:
Alltel
Bell
Cricket
Iusacell
Qwest
Sprint
Telecom NZ
Telus
Verizon
Click to expand...
Click to collapse
voice command and ringer volume
gcincotta said:
Please read more. All 3.1.x roms REQUIRE the carrier cab to be installed. It says it in clear text right on the first page of the kitchen thread.
Click to expand...
Click to collapse
Can someone with DCD Rom 3.1.x and also MS Voice Command confirm if a bug is present? I have 3.0.4 and my wife has 3.0.1 and we both have the same issue with MS VC. Basically, if you use VC to set the ringer volume, you can not re-adjust it using the phone. So, turn off ringer using VC then try to turn it back on using the stylus. Verify that the volume is turned back on.
I simply can not turn the volume back on with the stylus. I can turn it back using VC no problem. Thanks.
I personally do not use Microsoft Voice Command anymore.
The reason is that it uses a lot of resources on my phone.
I did several customizations on my phone and have several apps installed and I roughly get 24 to 25 mb at startup. With voice command I get around 19 to 20.
I just rather use Voice Speed Dial that is in DCD's Kitchens. Yes you would have to program your voice to recognize the commands, but it does what I need it to do and it saves a lot of memory.
findthisfunny said:
Can someone with DCD Rom 3.1.x and also MS Voice Command confirm if a bug is present? I have 3.0.4 and my wife has 3.0.1 and we both have the same issue with MS VC. Basically, if you use VC to set the ringer volume, you can not re-adjust it using the phone. So, turn off ringer using VC then try to turn it back on using the stylus. Verify that the volume is turned back on.
I simply can not turn the volume back on with the stylus. I can turn it back using VC no problem. Thanks.
Click to expand...
Click to collapse
I have been using VC with all of DCD's ROMS and have not had a problem. I bought the package a while back but found an OEM that I use now. I works great when it does figure out what I am saying. LOL
I don't have any issues with setting the ringer by VC and then by stylus. I also don't have any issues using it through my BT headset. Make sure you have the right settings in the settings control panel with the icond Voice Command. Check out the options and notifications for each of the checked items. There was also a set of files to fix something a while back I have posted them here but you should do the search to find out what they fixed.
I am searching but have not lucked up on the correct search words for an answer...
New Verizon HTC6800 updated the 3.12 and radio 3.39. I noticed voice activation was not on the phone so I searched and found a thread that said add:
Cyberon_Voice_Speed_Dial_v1.2___BT_Fix.cab
So first was that correct? OK ,I did that and got voice command back to make calls holding the device. What I cannot do which I could do with the OEM was:
Turn on my Jaw Bone BT headset (phone BT is on)
Press the button on my BT set
(OEM setup) Would open the voice command box and I speak the name "wife"
Now on the new setup ROM 3.12 when I press the button it goes to the phone screen where I can dial a number which I do not want. I am sure there is a easy fix and hate to waste a post so can someone share that with me. I want to be able to press the button on BT set and hear the beep in my ear so I can speak a command to call a number?
Thx
Sounds like you want Microsoft Voice Command?? Not the Cyberon Voice Dialer. Cyberon requires self created voice tags if I remember correctly...MSVC just requires you to push your BT headset button and speak the command.
is that my only option....anyone else...vets???
What did you end up doing about this?
Hi,
can some-one help me, I am trying to use ms voice command 1.6 on my hd2 but when I assign it in the buttons menu hit ok, come out to the home page, hold down the send/green button but nothing happens....can someone be kind enough to help me with this problem...
Hi
I installed " Cyberon Voice Commander " from the Market on my Galaxy S2.
The first time I used my Bluetooth headset to voice dial, the phone asked me to choose which default program I would like to use for Bluetooth voice dialing, the Cyberon voice commander or the Vlingo voice commands, I chose the Cyberon and from then on every time I pressed the Bluetooth headset it would initiate a call using the Cyberon voice commander.
Recently something changed, every time I am pressing the Bluetooth headset it starts the Vlingo voice commands, no matter what I do I can't go back to use the Cyberon voice commander as my default program, I can only use Cyberon if I open the program through my phone.
I tried using voice input and output settings and looking also through the setting of Cyberon and Vlingo, nothing works.
Could someone tell me what am I doing wrong? How do I change the default back to Cyberon.
Many Thanks.
Same problem
I have the same problem, but Galaxy s2 never asked me what application to set as preferred.. simply I can't set Cyberon to start when pressing BT button.
It always start slingo. Maybe because my GS2 was already updated.
Cyberon wrote me it's a samsung not standard managing of BT events.
From what you wrote it seems that at the beginning the implementetion was standard, than an update broke it up.
Have you updated ROM or are samsung apps updates?
It would be nice to repack the old apps to turn back the possibility to choose BT event.
For now I use Tasker to kill Samsung Voice command process and start cyberon. It works fairy well.. but not always perfectly.
Very annoying!!
Any one??
Hi same problem here. I would like to chose the application to start with the bt headset button, but the phone forces to use the vlingo app.
My father has this app on his SGS2 and actually emailed developers about this problem.
The extremely polite and professional support (seriously, I have never read such a concrete and polite reply from a software company, ever!) said, that this is a firmware limitation and they cannot fix it.
I think this started happening after he updated firmware from Polish KF1 to newer one.
They said, that unless Samsung changes this behaviour, they cannot do anything about it, at least they are not aware of the solution for now.
Yes Cyberon folks are very kindly and polite!!
I have found a fix!!
* Root your device
* Set google as default voice recognition instead of vlingo in settings>voice recognition (not sure this is important to do)
* Install Titanium backup (i Have paid full version, but probably you can use free
* Disable "comandi vocali" (Italy) which in english should be like "voice commands"
* Than I have cancelled the BR pairing, restarted the phone and paired BT again...
* Set Cyberon to use long press bt button to start
IT WORKS!!
Hi all.
Yesterday I've updated firmware through KIES to last one for my region. And now I'm facing same problem
Before updating it was possible to select which app will be default for voice dial. Now, even after factory reset, phone doesn't ask me which app to use. And I unable to find "Voice Talk" in the list of All applications to change its defaults.
I don't want to root device and don't want to install firmware through ODIN. Don't ask why Just want my device to be clear.
Any help with this problem will be highly appreciated.
Thank you
Any news about this issue?
Hi all.
Today I've updated firmware through KIES to last one (KG2) for my region (Romania). Now I'm facing same problem as all the others.
Before updating it was possible to select which app will be default for voice dial (Cyberon Voice Speed Dial). Now it is launching the Vlingo by default.
I changed to Google Voice but in vain... It's still launching this useless Vlingo.
Does anybody has found a solution without rooting the phone?
Stefan
stefanjadex said:
Hi all.
Today I've updated firmware through KIES to last one (KG2) for my region (Romania). Now I'm facing same problem as all the others.
Before updating it was possible to select which app will be default for voice dial (Cyberon Voice Speed Dial). Now it is launching the Vlingo by default.
I changed to Google Voice but in vain... It's still launching this useless Vlingo.
Does anybody has found a solution without rooting the phone?
Stefan
Click to expand...
Click to collapse
I applied solution described in post #5. It works fine.
....but you must be rooted
I have a slightly different problem...
I have no issue using Vlingo (if it worked)
Firstly, it's not responding to pressing the button on my bluetooth anymore.
Secondly, when it did, the device had to be unlocked for it to work.
Damn you Vlingo.
The only legal solution is unfortunately this, as far as I know:
1 Backup the phone
2 Take it to authorized repair service
3 They will "degrade" firmware to the last version which was problem free
4 Restore from backup and hope it will work. More chance to succesfully restore is if you made a backup on previous firmware
5 Reinstall all the apps.
Well done Samsung
Bytheway can anyone tell me what was their last firmware that did not have this issue?
Awful solution.
Anyone with the latest 2.3.4 firmware here? Can you confirm this bug?
Ray Adams said:
Awful solution.
Anyone with the latest 2.3.4 firmware here? Can you confirm this bug?
Click to expand...
Click to collapse
I agree but does anyone knows any better without rooting? Everyone must decide the importance of being able to use bluetooth calling from the car. I personaly need it so much I am willing to degrade firmware. I waited with buying gs2 until voice speed dial came up.
Anybody out there good enough to know how to disable or erase voice talk app, integrated in GS2?
Your first question should be how to use the search function in this forum.
Update solved the problem
Hi
Yesterday my Galaxy SII got an update, Android OS got updated from 2.3.4 to version 2.3.6 and Baseband version is now SC02COMKL4.
Now I am able to activate the voice dialing by a long push on the Bluetooth connect button.
Where's voice input key
Overall wonderful rom!! .. but I couldn't find Mic key for activating voice input in my keyboard, evev if in Settings->Keyboard&Languages->"Voice input key" I set both "on main keyboard" or On symbols keyboard".
Anyone can give me a suggestion?
Tnx.
Gabo
lwizard said:
Yes Cyberon folks are very kindly and polite!!
I have found a fix!!
* Root your device
* Set google as default voice recognition instead of vlingo in settings>voice recognition (not sure this is important to do)
* Install Titanium backup (i Have paid full version, but probably you can use free
* Disable "comandi vocali" (Italy) which in english should be like "voice commands"
* Than I have cancelled the BR pairing, restarted the phone and paired BT again...
* Set Cyberon to use long press bt button to start
IT WORKS!!
Click to expand...
Click to collapse
ANOTHER PROBLEM RELATED WITH THE SAME TOPIC
I can start Cyberon Voice Commander (CVC) with BT headset button.
But there is only one problem that I can not solve anymore:
Everytime Note2 is turned off completely or restarted, I have to reassign the BT headset button to Cyberon Voice Comander.
Is there any genious gentleman to help me ?
Thanks.
Tuncay