Related
Hey, after rooting my phone and installing a few different custom roms, my USB connection has stopped working. whenever I connect the phone to a PC via USB, the device is unrecognised, and mass-storage doesn't work. It's definitely a hardware error, since trying a variety of different roms on a variety of computers, hasn't solved the problem, and even the recovery image doesn't allow mounting the SD card.
Research has suggested that it's affected other people in the past, with the only fix being to replace the motherboard. Hence, I'm looking for advice on un-rooting, rather than advice on fixing (but thank's for your good intentions!).
So I need to un-root my phone (and set it back to factory defaults), so that I can return it to T-mobile and have them fix it under warranty. Of course, because USB isn't working, I can't un-root the "traditional" way, by just installing the RUU update.
So I'm trying to figure out how to set the phone back to its original software, and I thought I'd ask for some advice before I make a mess of things...
As far as I know, there are 2 things that need to be done:
Flash the stock rom back on
- This bit is pretty straightforward; I just use the stock update.zip files found on the Modaco Forums (can't share a link here due to new account), and use the recovery image to update. The lack of a USB connection isn't a major issue for this bit, as I can transfer the zip files using the WebSharing Lite app (which allows me to upload to the phone over wi-fi)
Remove the Amon_Ra recovery image
- This is where I'm having issues. How do I go about clearing the recovery image, without a working USB connection? I'm not really sure how I put the recovery image on in the first place!
If someone could give me advice on how to remove the recovery image (or reset it to the stock one... I'm not sure if there was one initially), I'd really appreciate it. Also, please let me know if I'm missing out anything important.
Assuming everything works, later I'll write out a proper guide for anyone else who's ever in the same position.
Thanks in advance
Maybe this thread could help you?.... Read the last post on the 1st page, something about re-enabling USB.
Worth a shot?
EDIT,..... The link would help wouldn't it,.... Nandroid restore left other stuff around? (No ADB, No SD) [SOLVED]
thanks for your suggestion, but it didn't seem to work. apparently the issue has cropped up for other users, and the only long-term fix is to replace the motherboard under warranty, which is why I'm asking about un-rooting.
k28 said:
thanks for your suggestion, but it didn't seem to work. apparently the issue has cropped up for other users, and the only long-term fix is to replace the motherboard under warranty, which is why I'm asking about un-rooting.
Click to expand...
Click to collapse
You sure?... Have you started your phone in fastboot (hold vol- and power)? Try that to make sure if you haven't already. Once it comes up with the white screen and skateboarding androoids it'l say to press back or vol- (not sure which one so read it) to put into fastboot.
But if you have done that already,... Unfortunately I dont know how you can run an RUU .exe without USB.
yep, tried the whole fastboot thing, didn't work. I can connect to fastboot, but using the command "fastboot oem boot" , everything is normal - usb/sdcard are not disabled
(i didn't copy the exact output, and I don't have sdk on this laptop.. but yeh, that person's advice didn't match my situation).
hopefully someone else will have some ideas/comments?
k28 said:
yep, tried the whole fastboot thing, didn't work. I can connect to fastboot, but using the command "fastboot oem boot" , everything is normal - usb/sdcard are not disabled
(i didn't copy the exact output, and I don't have sdk on this laptop.. but yeh, that person's advice didn't match my situation).
hopefully someone else will have some ideas/comments?
Click to expand...
Click to collapse
What?.... It DOES connect in fastboot?... Says fastbootUSB (or something similar) on the screen?
I had same kind of problems with my usb. Try cleaning the "usb-hole"
lol, tried cleaning it but no luck.
from the research I've done, I've sorted out how to put the main ROM in place.
now I just need to find a copy of the recovery image of a T-mobile G2 Touch, and flash it using flashrec
can anyone help with that?
1. recovery - put regular hero recovery od sdcard and try to flash it using flashrec
2. root apk - delete it using root explorer
Dear All,
I am a newbie on this so please bear with me. I did take the time out to read up on some of the basics before I posted this but I am not familiar with most of the acronyms.
I bought a HTC One X+ with no power button. The seller claimed he bought the phone as is and didnt know if the phone worked or not.
When I received it, I placed a power button and put it on charge. Within minutes the phone loaded with the 3 logo (UK) but to the bootloader screen. I tried all the various options from Hboot, Restart, Restart with Bootloader and Power Down. When I choose HBoot, I get the following error:
sd checking....
Failed to open USB master mode
(preload) Failed to open USB master mode
loading image....
Failed to open USB master mode
Plug off device.
When I try to power down, it simply restarts. When I choose Recovery, nothing works. I just keep coming back to the bootloader screen no matter what I do.
I read the following thread but I didnt understand some of it, eg RUU. I assume this is the type of ROM that is flashed to the phone.
http://forum.xda-developers.com/showthread.php?t=1940194
I have tried connecting phone to the laptop to see if I can see the drive in windows explorer. Laptop recognises the HTC phone in System Device (loaded HTC Sync Manager from HTC website) but it wont recognise the phone's drive. When I try to use the CMD box, i get same issue. It cannot find the phone's storage, therefore I cannot write anything to the phone.
It seems like whoever tried to flash this phone which is on the 3 network made a hash of it, as from reading the above thread, it looks like 3 networked HTC One X cannot be unlocked.
Therefore is it possible to get this phone back to working mode as it was, given the issues I am having.
Any help will be mightily appreciated! :good:
Thanks
Shanni
you got those "errors" because you have the usb cable plugged in too soon.
Lloir said:
you got those "errors" because you have the usb cable plugged in too soon.
Click to expand...
Click to collapse
I have tried it with cable in early and late. It is the same issue
I just realised it is NOT on the 3 network, that is my HTC One X! Cant believe I got that mixed up!
Actually I dont know what network this is on as I cant get out of bootloader!
I have been informed by a friend that the phone needs to be s-off before it can be flashed. How can I do this?
this device DOES NOT need s-off so your friend is talking out of his ass,
the guide to flash ruu's is in the general section
also there is NO WAY to s-off the X+
Lloir said:
this device DOES NOT need s-off so your friend is talking out of his ass,
the guide to flash ruu's is in the general section
also there is NO WAY to s-off the X+
Click to expand...
Click to collapse
Ok cool, I will have a look at flashing ruu's. Will that fix my phone?
shanni10 said:
Ok cool, I will have a look at flashing ruu's. Will that fix my phone?
Click to expand...
Click to collapse
I keep getting signature errors everytime I try a different UK network RUU! I dont even know what this signature error means!
Also how do I know which RUU to use as there are so many different types. Any help will be gladly appreciated
I have followed Hasoon's directions using his utility tool. I have managed to unlock the phone but cant get beyond that.
Every single viable HTC One X+ RUU I use simply doesnt work. I cant access the USB drive to my phone (prob because the person previously never ticked USB Debugging when he/she attempted to root the phone) so cannot transfer the RUU files to my phone.
I have tried to run the original RUU for this phone but it keeps giving me an error. I have no idea what to do next. I have read all the posts on the General Forum for instructions on ADB, rooting, unlocking, RUUs etc.
I would truly be thankful if I can get some assistance here please.
shanni10 said:
I have followed Hasoon's directions using his utility tool. I have managed to unlock the phone but cant get beyond that.
Every single viable HTC One X+ RUU I use simply doesnt work. I cant access the USB drive to my phone (prob because the person previously never ticked USB Debugging when he/she attempted to root the phone) so cannot transfer the RUU files to my phone.
I have tried to run the original RUU for this phone but it keeps giving me an error. I have no idea what to do next. I have read all the posts on the General Forum for instructions on ADB, rooting, unlocking, RUUs etc.
I would truly be thankful if I can get some assistance here please.
Click to expand...
Click to collapse
where in the UK are you? if you are close to me i can sort it out for you. Also you need to relock the bootloader put the device into bootloader > fastboot usb and THEN run the correct RUU
Lloir said:
where in the UK are you? if you are close to me i can sort it out for you. Also you need to relock the bootloader put the device into bootloader > fastboot usb and THEN run the correct RUU
Click to expand...
Click to collapse
I am in Manchester. I have relocked the bootloader but now the phone wont charge. I have seen a post here how to fix that, so I will try that.
I have done the above but I simply do not know what the correct RUU is. How do I even know which is right? I have tried around 10 so far and none have worked.
Fixed It!!!!
I cant believe it! I fixed it!!!!
I accidentally came up on a post here on this forum looking for something else and a member discussed the same problem as me. The reason why he was getting the signature error etc because he had the wrong recovery loaded.
I therefore loaded the latest TWRP version from here (link provided from General Settings) - http://techerrata.com/browse/twrp2/enrc2b
I didnt use Hasoon's recovery as TWRP is user friendly. I relocked the phone, loaded the correct RUU and it worked!
So to summarise this is how I fixed my phone
1. Downloaded Hasoon2000's toolkit from here - http://forum.xda-developers.com/showthread.php?t=2066390
2. Rooted the phone
3. Unlocked the phone
4. Flashed latest recovery file using his toolkit (Your Own Recovery)
5. Loaded the correct RUU - RUU_ENRC2B_U_JB_45_HTC_Europe_1.17.401.1_Radio_3.1204.168.32_release_299688_signed.exe from http://androidfiles.org/ruu/?dir=ENRC2B
NB to know which RUU to use, go into bootloader and you will see the RUU details at the top part of the screen - in my case it was Radio_3.1204.168.32. Also when I tried to run any RUU.exe file it told me the version I had was 1.17.401.1. I searched for it on the android files and found the above RUU to match my RUU. This I guess is the stock RUU.
As a newbie, it can be very tough trying to understand this, but this forum is just awesome!! I am an accountant by profession, and I cant believe I figured how to fix an HTC One X+ by going through this forum! The FAQ has it all - http://forum.xda-developers.com/showthread.php?t=2179337
Thanks to everyone who gave their advice here!
I am now going to try performance tweaks next as I am feeling confident
http://forum.xda-developers.com/showpost.php?p=34021248&postcount=2
Shanni
Hello friends,
This is my first question and I really need help with this one. I am not a developer but trying to learn a few things to keep up. I have an HTC Desire X which went crazy after a jelly bean update and hence I decided to do something about it. I heard about rooting and flashing phone from my boyfriend and hence I got brave and read about rooting from this forum...but really messed things up.
I tried rooting Desire X running android jelly bean using Desire_X_All-In-One_Kit_v2.0 by hasson2000. I got really excited and messed thing up. Instead of following the correct procedure, I actually tried flashing a ClockWorkMod recovery without unlocking the phone. During the flashing process, I got the Fastboot menu on my phone and so I cancelled the first command line on my PC screen. The second screen appeared but after waiting for a long time nothing happened so I got scared and removed my USB cable form the phone. Then I tried the exact procedure given in this forum. But when I did, instead of booting into the Fastboot menu, phone shows a red triangle with an '!' symbol.
I can boot into the Fastboot menu by pressing Power and Volume Down button but then my computer doesn't recognize my phone.
Please help...this phone is my life..:crying:
Before you do anything further, do you have HTC USB Drivers installed on your PC ?
Your PC running Windows 8 and below ? And is your PC has USB 2.0 ?
The screen that you show is the screen before you go to stock recovery.
You said your JB update not working right, have you try to factory reset your device after you do the update ?
Before you can do rooting and flashing ROMs, you need to unlock the bootloader first. Unlocking bootloader will make your warranty void and null. So make your decision whether you want to proceed with bootloader unlocking.
I strongly recommend not to use a toolkit but to do it yourself. You don't have exact control about what the toolkit does, also you'll learn more about the process that way. Some important things to mention further: If you decide to unlock your bootloader, do it via the www.htcdev.com site. There, you'll need a login first, after that you can proceed with the steps given to you by the site. As ckpv5 said, you need to be sure to have all the drivers installed correctly (or use a linux live cd instead). Then, after you have installed a custom recovery, take a backup of the stock firmware first before you start to change anything! That's really important, otherwise you won't be able to get back to stock anymore. Good luck!
Reply
Thank you. You guys are so quick and helpful.
Yes I did install all the drivers of HTC but still my PC wont recognise my device when in I use power button and volume down key to boot into fastboot. My computer runs on Windows 8. I have the USB drivers installed and I have also tried a factory reset of my phone but nothing works! I think what I did made something bad happen to phone recovery.
Please help
Did you read everything and tried it as we said? Do you use USB 2.0 instead of USB 3.0? DO you have the bootloader unlocked? Please answer these questions first, otherwise we can't help you much.
Reply
dansou901 said:
Did you read everything and tried it as we said? Do you use USB 2.0 instead of USB 3.0? DO you have the bootloader unlocked? Please answer these questions first, otherwise we can't help you much.
Click to expand...
Click to collapse
No. Like I said, I got excited and messed ip the steps. Instead of unlocking the phone I first tried to flash a ClockWorkMod recovery. While doing so., it tool a lot of time after showing the fastboot screen so I thought something was wrong so I disconnected the USB cable. Then I realised that I had to first unlock it so when I tried to unlock the device, instead of showing the fastboot screen my phone shows the screen whose picture I have posted in my earlier firts post. I use usb 2.0.
Please help
Hoy did you unlock? Did you register at htcdev.com for a key? Did you submit the identifier token? Try the exact procedure given here: http://forum.xda-developers.com/showthread.php?t=2076675 and read everything. also the external links, to be sure to understand what you're doing. Then, do it without using a toolkit.
Hello XDA-Developers,
I've been a reader here for awhile now learning things about the android development for my devices and used many of your all members TUTs, but now i have came across a big issue that has broke my phone and need assistance getting it back online to be used with my carrier again. Below I'll explain my situation of what happen and what I need to be done so I can use the phone again or least get it back to factory stock so I can get a new phone... I will also offer someone $5-10 via PayPal for the assistance if you can help me get my phone back to the condition needed.
To start it off, I purchased a phone off a guy on craigslist, a AT&T HTC One M7 (Model: PN07120), when I purchased the device it was unlocked so I could use it on my carrier that was the reason I purchased it because I'm with T-Mobile. When I purchased the phone i went to setup the device to my needs and requirements and after two days of having the device, I noticed that the phone still had the previous owners information stored and was setup based on him, so because I didnt know the phone was rooted or anything, I googled how to factory reset my phone, so that way I could set it up to my wants, and requirements and below I'll explain the steps i'm at and what it is doing...
1. Searched google for the how-to method to factory reset my phone...
2. Went to 'Settings App', Backup & Restore, Reset Phone, Erase everything, Selected OK.
3. Followed the steps, phone rebooted..
4. Loaded up to the HTC (green logo) screen and stayed there...
5. Waited a few moments, phone never powered 100% back online just stayed at the HTC welcome logo when you first power phone back on.
6. So then I did the Boot Menu steps, (Hold Powerkey + Volume Down) to get into the boot menu,
7. When I got there it loaded to the boot manager window and I clicked FASTBOOT
8. Loaded new menu/logo "twrp" logo, then went to a menu "team win recovery project v2.6.3.3" with the list of options: INSTALL/WIPE/Backup/Restore/Mount/Settings/Advanced/Reboot.
9. I went to reboot to try to least get the phone booted, then when I was in the option to reboot, it gave me the warning of "No OS Installed", Continue without OS?"
10A. If I selected yes, it told me Install SuperSU, for root, otherwise phone wont be rooted.
10A1. I tried doing INSTALL SUPERSU did nothing..
10B. Did without installing SUPERSU and did nothing too, just when I boot comes back to this same menu Team Win Recovery Project.
So it seems I bricked my device as what everyone calls it to what I believe, I am unsure though or unsure how to fix this. I need to get the device either back to factory resetted to like the device comes out the box, so that I can use it, or what to do to get it back rooted successfully and working to be able to use the phone like i could at first.
I tried contacting the buyer but hes ignoring me now that I told him he told me the device wasnt rooted but the device was rooted and i seemed to have a major problem happen trying to restore the phone to factory defaults to set it up to my requirements...
My concerns and want is..
- My Carrier is T-Mobile USA LTE - So, I would have to get the device to stay UNLOCKED so I can still use the device on my carrier: T-Mobile, as it is a AT&T HTC One M7 Unlocked (Was working fine on my T-Mobile Sim prior to me trying to factory reset, besides the phone was named to the original owner and had all his settings and customizations that i didnt like or want.
- I NEED to get the phone back in a working condition. So please I'm really asking for your help I tried searching a couple articles here but couldnt find anything related to my situation.. This is why I am offering a payment for someone to be able to successfully restore my device back to working condition. Please help me!
- NOTE: When plugged up to the computer via USB Cord it did not connect or anything also. I also did not perform a backup because I didnt need any information that was currently on the device because it was the content and settings of the original owner i bought it from so I wanted to clear it all and set it up to my own.
- Overall, my phone is messed up because I tried factory resetting the device not knowing it was rooted, during the process found out it was rooted and now seem to have a bricked phone and need to know how i can fix it, and get android OS back installed, as it tells me there is NO OS installed when I reboot or try booting the device, and it remains at the HTC Bootlogo when powering it on without holding the power + volume down key to access a boot menu to perform a reset, install, etc, Like I mentioned I just want to restore my phone back to working condition even if that means to have to root the device again, etc. All I'm asking for is someone to either help me with each step or to write a step by step what I would need to do to recover and restore my phone.
Phone: HTC one m7 (AT&T)
Computer; Windows
Thank you,
PM or respond here.
Don't worry you device is not bricked...
Google Android Revolution HD 41.0 for HTC one. Download that ROM.
Second you will have to install android SDK to be able to access adb.exe and fastboot.exe...
Now once you installed the SDK move the ROM ARHD to where adb.exe is located.
run command prompt "CMD" from your computer until you are in the folder where you have you adb.exe
Now on your phone get into recovery TWRP and select advance, in advance the is an option called adb sideload click on it and at the bottom slide the button to initiate that mode.
Back to the computer in which you should be in CMD type command "adb devices" and make sure your device shows up. After successfully seen your device there type "adb sideload file-rom.zip and press enter, make sure the file-rom.zip is the exact name of the ROM you are trying to push into the phone.
Sent from my HTC One using xda app-developers app
TopoX84 said:
Don't worry you device is not bricked...
Google Android Revolution HD 41.0 for HTC one. Download that ROM.
Second you will have to install android SDK to be able to access adb.exe and fastboot.exe...
Now once you installed the SDK move the ROM ARHD to where adb.exe is located.
run command prompt "CMD" from your computer until you are in the folder where you have you adb.exe
Now on your phone get into recovery TWRP and select advance, in advance the is an option called adb sideload click on it and at the bottom slide the button to initiate that mode.
Back to the computer in which you should be in CMD type command "adb devices" and make sure your device shows up. After successfully seen your device there type "adb sideload file-rom.zip and press enter, make sure the file-rom.zip is the exact name of the ROM you are trying to push into the phone.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Where can I find this stuff I need to download? I tried doing a search and got a different version, Android Revolution HD 51.0, but could you please link me to the stuff I need to download on my computer, etc?
Okay I've done the steps you've instructed to me and I'm stuck at after launching the sideload feature on my phone; then going back to the computer and running 'adb devices' and under "List of Attached Devices" there isn't anything listed yet, and the phone says "Starting ADB sideload feature..." is the last line, I'm stuck with what to do...
I downloaded android SDK
downloaded the ROM
moved the ROM to the sdk folder where adb.exe and fastboot.exe are
launched adb sideload feature under advanced on mobile device
went back to the computer and ran, 'adb devices', and list of attached devices is none...
so I'm back at being stuck.
djay1127 said:
Hey again,
Okay I downloaded the android SDK, and I'm downloading the correct ROM now to install. Only questions I have for you is the following...
1) You said to move the ROM to where adb.exe is at... What do you mean by this? I don't have that file on my computer...
Where do I move it too once I have the android SDK downloaded and the rom downloaded...
Click to expand...
Click to collapse
Follow this video
http://android.mobilenicheapps.com/tag/android-sdk-installation
Sent from my HTC One using xda app-developers app
TopoX84 said:
Follow this video
[/url]
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I watched the video and got all of that working and checked based on the video and made sure all was installed, now i'm just still stuck at where you instructed me to do 'adb devices' after launching adb sideload under advanced on mobile, i did that, and i get
List of devices attached...
<nothing>
Then goes back to where I can type another command...
The phone itself screen is on the adb sideload feature, and in the textbox thing, shows the following
Updating partition details...
Starting ADB sideload feature...
then has a Cancel button underneath and then a loading bar underneath that... am I doing something wrong? or missing something?
Do I need to have the USB cord plugged into phone/computer also to do this? or dont have it plugged up...
djay1127 said:
Do I need to have the USB cord plugged into phone/computer also to do this? or dont have it plugged up...
Click to expand...
Click to collapse
In order to do a sideload you have to have the cord plugged to both the phone and the computer...
Sent from my HTC One using xda app-developers app
TopoX84 said:
In order to do a sideload you have to have the cord plugged to both the phone and the computer...
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I tried that and still get no devices attached.
djay1127 said:
I tried that and still get no devices attached.
Click to expand...
Click to collapse
Do you have HTC manager installed? If so uninstall it but leave the HTC drivers.
Which windows you are using as well ?
Sent from my HTC One using xda app-developers app
TopoX84 said:
Do you have HTC manager installed? If so uninstall it but leave the HTC drivers.
Which windows you are using as well ?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
HTC Manager = no
drivers = i dont know.
Note: I never had the phone plugged up to my computer before when it was working. I had just purchased the phone off of craigslist and the guy didnt inform me it was rooted or anything just that it was unlocked and worked on tmobile and when i got it it had all his info on it so i factory resetted it and it messed everything up as you can see.
So, I dont believe i have anything drivers installed and i know when i plug it up, there are 4 things windows says installing/etc, and only the first one says completed the other 3 fail.
I am using Windows 7.
You help me get my phone back in working condition I will personally paypal you $20.
djay1127 said:
HTC Manager = no
drivers = i dont know.
Note: I never had the phone plugged up to my computer before when it was working. I had just purchased the phone off of craigslist and the guy didnt inform me it was rooted or anything just that it was unlocked and worked on tmobile and when i got it it had all his info on it so i factory resetted it and it messed everything up as you can see.
So, I dont believe i have anything drivers installed and i know when i plug it up, there are 4 things windows says installing/etc, and only the first one says completed the other 3 fail.
I am using Windows 7.
You help me get my phone back in working condition I will personally paypal you $20.
Click to expand...
Click to collapse
Go to this website and download the HTC sync manager
http://www.htc.com/www/software/htc-sync-manager/
Once installed go to control panel > programs and uninstall a program... Look for the HTC sync manager and uninstall it, but leave the htc drivers alone.
Connect the HTC one to the computer and wait for the drivers to install automatically... After they are successfully installed try to run the CMD adb command adb devices
Sent from my HTC One using xda app-developers app
TopoX84 said:
Do you have HTC manager installed? If so uninstall it but leave the HTC drivers.
Which windows you are using as well ?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Okay so I've done all that and after doing what you said, plugging the phone up to the computer everything installs besides the HTC MTP driver when the phone is plugged in. I still tried doing adb devices from cmd prompt to check and that didnt work still, no devices listed.
I get this error under the driver:
This device cannot start. (Code 10)
djay1127 said:
I get this error under the driver:
This device cannot start. (Code 10)
Click to expand...
Click to collapse
Based on what I've been reading that code error might be cause by a corrupted driver installed.
http://support.microsoft.com/kb/943104
Sent from my HTC One using xda app-developers app
TopoX84 said:
Based on what I've been reading that code error might be cause by a corrupted driver installed.
http://support.microsoft.com/kb/943104
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I answered your PM and awaiting for you to pop back up online... I also sent you a PM with some details and also wanted to let you know TV is installed.
djay1127 said:
I answered your PM and awaiting for you to pop back up online... I also sent you a PM with some details and also wanted to let you know TV is installed.
Click to expand...
Click to collapse
was a tough little driver... well the solution as we saw was that instead of trying to make recovery detect the drivers.... what needed to be done first was let fastboot detect drivers "android 1.0" and once that was done... the previous error was gone.
TopoX;
You know this guy right here is clutch in my book.... He actually walked me through step by step, customizing how i needed it, fixing everything, and getting it back up and even though we had to do alot of modifications on my computer-end, him with TeamViewer literally fixed my phone, upgraded my laptop, and got my phone running better then normal and actually showed me how to do everything and taught me things I didn't know how to do with these Android Phones.
I am now very happy and thankful of XDA-Developers for allowing me to get this assistance and for having a great community with members like TopoX who literally saved my ass and restored my phone back to working condition and fixed my laptop all together, even though I was a brand new member with hardly any posts and not really much background, anyone else wouldn't of wasted their time... but he helped and even was up until 3AM ish doing it with me to make sure I got it back to exactly how I wanted...
We had to get the HTC MTP Driver installed correctly which kept failing/getting code error 10 (Unable to start) which if you google the issue it seems ALOT of people get this issue, and we resolved it by fastbooting and letting it install Android 1.0 itself, then manually updating my pc with windows updates and getting rid of the junk to stop corrupting and failing the drivers needed, then getting everything needed to flash my phone and re-root the device getting everything back in a working condition, unlocked, got that done and now phone is working better then before...
I'm currently running Team Win Recovery Project, ARHDOne-61.0 Google Play Edition, Rooted, SuperUser and Unlocked.
I personally wanna thank TopoX for everything he did and dedicating his time to helping resolve the issue for me.
TopoX84 said:
was a tough little driver... well the solution as we saw was that instead of trying to make recovery detect the drivers.... what needed to be done first was let fastboot detect drivers "android 1.0" and once that was done... the previous error was gone.
Click to expand...
Click to collapse
Cool story bro. Seriously..... Cool story.
I love XDA.
If anyone is trying too get in contact with "djay1127", please contact me on this user, my original first account djay1127 I can no longer access the account as I set it up with my Google account, gplus login, and I can no longer access that email, it's closed out. So I created a new account with my main email account and username.
I plan to contact a admin after doing some searching to discuss getting my old account removed, and the posts and crap merged into this account instead...
Regards.
ok so im having a few problems with my rooting process. one i have to manually put my device into fastboot since doing it threw my windows 7 CMD just seems to not work since it will say device offline. then once i do get to fastboot i run into my second problem. the recovery.img seems to be frozen during the sending process. in fact its still trying to send it to my device. my device is unloocked. what am i doing wrong? or am i missing something? i followed another titorial on here and im still stuck. mostly on the recovery.img part. it just doesnt seem to send. just sits there saying its sending it.please help if you can.
says S-On . how do i gewt it to say s-off?
LordXombie said:
ok so im having a few problems with my rooting process. one i have to manually put my device into fastboot since doing it threw my windows 7 CMD just seems to not work since it will say device offline. then once i do get to fastboot i run into my second problem. the recovery.img seems to be frozen during the sending process. in fact its still trying to send it to my device. my device is unloocked. what am i doing wrong? or am i missing something? i followed another titorial on here and im still stuck. mostly on the recovery.img part. it just doesnt seem to send. just sits there saying its sending it.please help if you can.
Click to expand...
Click to collapse
Sounds like you need to update to the latest version of ADB/FASTBOOT the "device offline" is usually due to an incomatible older version of ADB. Get the latest version on your PC then make sure that ADB is working before trying fastboot.
LordXombie said:
says S-On . how do i gewt it to say s-off?
Click to expand...
Click to collapse
We don't have an S-off solution for this phone yet but it is not required for root, although you will need to flash jmz's insecure kernel for changes to "/system" to stick after reboot even when rooted,
MiniBlu
i cant seem to get adb to update.
LordXombie said:
i cant seem to get adb to update.
Click to expand...
Click to collapse
Install the latest on your PC from here http://forum.xda-developers.com/showthread.php?t=2317790
MiniBlu
ok so i did that and it is still saying device offline. Now im trying a program i found on here. desire_610_root_v3.exe it was able to reboot the device into bootloader then it brought it into fastboot menu then it started to send the file then it just snags there. the file just keeps saying its sending. i dont know whats going on.
ok it still not getting teh recovery.img on the phone. it just keeps sending it with out doing anything..
ok so this htc is giving me way mopre problems then the htc one vx. i really need help. and now im kind of lost what to do. Currently all i have done is unlocked the device.
ADB says my device is there. Threw cmd i can't get it to fastboot using adb reboot fastboot. all it does it reboot teh device, it wont go to bootloader. I do have bootloader unlocked. when i go and make my device go to bootloader manually i try to do the fastboot flash recovery recovery.img it starts to send the file then fails. unknown error. what am i doing wrong?
ok so it seems changing my usb cord fixed it. i got the file sent and rooted my device. thanks for the help MiniBlu gave me !
LordXombie said:
ok so it seems changing my usb cord fixed it. i got the file sent and rooted my device. thanks for the help MiniBlu gave me !
Click to expand...
Click to collapse
That's info that more people should have. The right usb cord can be difference between failure & success. I remember I went through 6 different usb cables jailbreaking my atv2.
For this phone, however, I just used the one that came with it. But I found the automated process to be sticky (not a tech term) it seemed to freeze a lot during the process.
I wound up plugging and replugging the usb when it froze.
It rooted my phone, installed twrp but needed to flash jmz kernel manually. The root tool works though. And to be honest, until I read this I didn't even think that a different cable might fix those issues in the automated process.
The other night for fun I rooted an old kindle hd and I needed to unplug and replug to get that to work. I was using the same cable that came with HTC desire.
***Anyone ever use a fastboot cable? Apparently u need one to install a 2nd boot loader on kindle hd and I'm wondering if that type of cable would resolve issues like this? That's a question not a go ahead to try it. I know very little about that and don't know if it could possibly cause more serious issues. They're cheap on eBay and I'm getting one for the kfhd.