Just disappeared!
The shortcut button says "Error oprning the shortcut or locating the target filename". The button on the screen does not work at all. Opened the new box two days ago! Was working fine yesterday!
Reloaded via Sim Manager.
Stumped. Any ideas.
Cheers,
Anthony
Related
Firstly I would like to thank numourous people on this website, as a long time reader and solver of a few phones I have had over the last year, its thanks to you people that I have been able to fix, upgrade, and modify these phones.
Thank you all.
My problem is I recently bought 3 of these SPV m3100 from a local boot sale, 2, I've got working, unlocked and WM 6.1 installed and mobile shell, running perfect, the other one starts and gets up to the phone password, which I have no Idea what it is, I've tried to do a hard / soft reset ,I can get it into bootloader, but It trys to sync with activsync but says "unlock password !"
I've also tried a 1gb micro sd card, but again nothing happens as its locked, I've downloaded the manual and it states that if you have lost the password, you have to clear the memory!!!
I've tried to do a hard reset but I do not get the option of returing phone to original( assuming this might get rid of the password?) I just get a white screen with no writing for me to press "R", bootloader is the coloured bars, and when normal booting, screen is perfect up to password screen!
Any help would be appreicated.
Many thanks again
lost password SPV M3100
baileybax said:
Firstly I would like to thank numourous people on this website, as a long time reader and solver of a few phones I have had over the last year, its thanks to you people that I have been able to fix, upgrade, and modify these phones.
Thank you all.
My problem is I recently bought 3 of these SPV m3100 from a local boot sale, 2, I've got working, unlocked and WM 6.1 installed and mobile shell, running perfect, the other one starts and gets up to the phone password, which I have no Idea what it is, I've tried to do a hard / soft reset ,I can get it into bootloader, but It trys to sync with activsync but says "unlock password !"
I've also tried a 1gb micro sd card, but again nothing happens as its locked, I've downloaded the manual and it states that if you have lost the password, you have to clear the memory!!!
I've tried to do a hard reset but I do not get the option of returing phone to original( assuming this might get rid of the password?) I just get a white screen with no writing for me to press "R", bootloader is the coloured bars, and when normal booting, screen is perfect up to password screen!
Any help would be appreicated.
Many thanks again
Click to expand...
Click to collapse
Switch off the SPV M3100, then on the bottom of the phone you have the answer call and end call buttons in clusters of 3 buttons on each side. The Top button on the left is a dash like symbol -- above the windows button, and you have the same dash like symbol button -- on the right above the ok button. You need to hold down both the dash-like symbol buttons and the middle silver button at the same time, then restart the phone. The phone will ask you if you want to reset the entire phone memory and settings back to factory settings and confirm this by using the Query keyboard letter "R". Click R and it will wipe it and set it back to its original settings. Hope this helps. Thanks Pete from www(dot)86plex(dot)com
Hello,
I'm using gtabcomb 3.3. Couple of days ago the gmail app stopped working on my tablet - there would be no response when I press the 'refresh' button and it always shows "no connection" in the message list, although internet browser works just fine.
I tried going into gmail using browser, and was able to do so except that I had to click 'continue' a few times when there's a pop up about problem with security certificate.
Anyone know how to fix this?
Thanks.
I have the same problem with mine gtacomb 3.3 too
If you tap the + plus symbol at the up and right corner of your screen, you can choose some apps from there.
Hi,
A few days ago, I updated my HTC Titan (bought in 2011 in France as a sim-unlocked device) to the official Tango update (+ firmware update) through Zune.
Then, after doing a hard reset, the usual setup assistant is displayed, but at the end of it there is a new step that wasn't there before the update (titled "Almost Done") telling me that the phone is going to launch some kind of htc specific utility in order to configure my data connection for my carrier. Then after clicking on "continue", I see a black screen for about 15 seconds (like when an app doesn't manage to load properly and WP7 kills it because it took too long to start), then the start screen appears (but I don't receive the usual fake welcome SMS from Windows Phone).
I can launch apps, but the capacitive Back button, Start button, Search button don't react (they cause the phone to vibrate, but WP doesn't react to these commands).
After shutting down the phone and restarting it, I'm greeted by the setup recovering screen (titled "Welcome Back") telling me that Windows Phone will resume my setup where I left it (that explains why the capacitive buttons don't react: they were software disabled because Windows Phone considered it was still in first setup mode. Same for the fake welcome sms I didn't receive). Of course the same problem happens again when I tap on continue, and when I restart my phone.
I tried several hard reset through the usual methods (either through the about menu, or through the menu displayed using VolUp+VolDown at startup). Still the same problem. I guess it's a bug that should happen on many Titan devices. I contacted the HTC support and they told me to send my phone back to HTC for repair
Of course Zune won't let me restore the backup because of the firmware update not longer compatible with the backup.
Did anybody have the same problem with a stock htc titan rom?
I'm also wondering what is the new "HTC Log disable" command on the "CUST APPSBL" screen? I'm sure it wasn't there before the update. Is there some kind of htc specific logging that is enabled by default (since it is a "disable" command). What is being logged?
Also, the red diode (indicating when the battery is charging) is being lit during startup, which didn't happen before the update. Does that mean something?
Hi,
It is quite normal for the new Tango ROM to display that extra HTC specific step, even though it doesn't work!
I experimented with the Titan a bit and found that as soon as the Start screen appears after setup, before doing anything else, long press the Connection setup app in the app list and uninstall it.
It will enable normal functionality.
If needed you can always download it again from Marketplace.
「 Jai Hind 」
Sent from my GT-N7000 using xda app-developers app
It happened to me too!!!
Moreover, after a hard-reset the HTC Market disappeared in the market!
I disabled the pin to the sim re-formatted, and connected to electricity, and aftew few times HTC market reappeared (!), immediately updated ALL the htc software (even the connection wizard) and everything is OK now... exept the possibility to install INSIDER (by Microsoft)... it is said that the app is not available for my device (!!!) ... I used it until yesterday on my Titan with Mango... I REALLY DO NOT KNOW
BYE
link8506 said:
Hi,
A few days ago, I updated my HTC Titan (bought in 2011 in France as a sim-unlocked device) to the official Tango update (+ firmware update) through Zune.
Then, after doing a hard reset, the usual setup assistant is displayed, but at the end of it there is a new step that wasn't there before the update (titled "Almost Done") telling me that the phone is going to launch some kind of htc specific utility in order to configure my data connection for my carrier. Then after clicking on "continue", I see a black screen for about 15 seconds (like when an app doesn't manage to load properly and WP7 kills it because it took too long to start), then the start screen appears (but I don't receive the usual fake welcome SMS from Windows Phone).
I can launch apps, but the capacitive Back button, Start button, Search button don't react (they cause the phone to vibrate, but WP doesn't react to these commands).
After shutting down the phone and restarting it, I'm greeted by the setup recovering screen (titled "Welcome Back") telling me that Windows Phone will resume my setup where I left it (that explains why the capacitive buttons don't react: they were software disabled because Windows Phone considered it was still in first setup mode. Same for the fake welcome sms I didn't receive). Of course the same problem happens again when I tap on continue, and when I restart my phone.
I tried several hard reset through the usual methods (either through the about menu, or through the menu displayed using VolUp+VolDown at startup). Still the same problem. I guess it's a bug that should happen on many Titan devices. I contacted the HTC support and they told me to send my phone back to HTC for repair
Of course Zune won't let me restore the backup because of the firmware update not longer compatible with the backup.
Did anybody have the same problem with a stock htc titan rom?
I'm also wondering what is the new "HTC Log disable" command on the "CUST APPSBL" screen? I'm sure it wasn't there before the update. Is there some kind of htc specific logging that is enabled by default (since it is a "disable" command). What is being logged?
Also, the red diode (indicating when the battery is charging) is being lit during startup, which didn't happen before the update. Does that mean something?
Click to expand...
Click to collapse
Yes, exactly the same problem happened after hard-resetting on tango. I simply waited a bit with the phone on the main menu and the softkeys not working. After a while, I received the WP7 welcome text, and the softkeys started to work again.
maTTeo
Hi all,
I made a new hard-reset.
As suggested by maTTeo I simply waited even with softkeys not working... I only disactivated the pin on sim so that the Titan could find an internet connection.
After receiving the SMS of woelcome on WP7, I immediately upgraded all the HTC apps
Everythings seems fine for the moment...
BYE
HI Everybody.
I have done an update on my Mozart and I am left with an update error 801800048 which I believe my phone is now walshied.
It boots but several of the apps will not activate, for example on pressing the phone tile the app tries to open but just returns to the start screen. Meaning I can not access the dialing pad. I can how ever make call using my contacts? Also the wifi is turned off and again the app returns to the settings screen.
I have read there is a software update that will solve this the Chris Walsh item ChevronWP7.exe or WPST.exe. Every link I have tried takes me to the expired page. Please could someone direct me to an active link or supply the program?
Thank you for any help you can offer.
Stuart
Hi,
First of all, my home button don't work correctly. When I do a simple click and a long click, absolutely nothing happens. But if I do a double click, it does work fine.
Secondly, some overlays don't comes up, like notification or volume changing pop-up or Facebook messenger chat heads just showing the wallpaper not the chat.
Finally, when I receive links from message or mail and click on it and it opens chrome (it's the default one) but it doesn't open the link.
Sometimes ago, I had just the 2 first problems. And just by restarting my phone all was gone.
But now I get all the 3 problems. I tried to factory reset my phone and it fixed the problem but then I had to restart my phone. And all the problems were back.
I got the galaxy note 3 (SM-N9005) with the firmware N9005XXUGBOJ2.
Thank you in advance for the help