After unlocking (read code) with xda2unlock and enter code in XDA2, the xda2 don't want to enter in network at all (radio say no service) also when i want a manual search of networks, phone come with an error. Any ideeas why? (phone ask pin no for sim card, but after entering no radio at all!)
florin_m said:
After unlocking (read code) with xda2unlock and enter code in XDA2, the xda2 don't want to enter in network at all (radio say no service) also when i want a manual search of networks, phone come with an error. Any ideeas why? (phone ask pin no for sim card, but after entering no radio at all!)
Click to expand...
Click to collapse
It could be a problem with the SIM unrelated to unlocking.
Does the SIM work in another phone? Does the SIM that came with the XDA2 still work? Have you tried another hard reset?
i tryed different SIM cards! the sim cards working fine! The original card not working anymore! I flashed the 1.6.0 in it now and the same radio stack seems not working fine! Can we rewrite the GSM settings again (maybe corupted)?
florin_m said:
i tryed different SIM cards! the sim cards working fine! The original card not working anymore! I flashed the 1.6.0 in it now and the same radio stack seems not working fine! Can we rewrite the GSM settings again (maybe corupted)?
Click to expand...
Click to collapse
So you also re-flashed it with a different ROM? I suspect that the problems are more related to this than due to the unlocking. The unlocking uses the official interface and no unorthodox methods are used to unlock it. I've had no reports from anyone that the phone did not work afterwards or even that the unlock code did not work. It is important to consider all aspects that could have influence else you might be hunting for the wrong solution.
Don't know what is realy rong with it. I locke it back (AT%HTCLOCK...) and now radio at least saying Searching (with same firmware). Do u have a full gsm backup (tunning as well?) maybe is something messed there.
I use ICQ or MSN or Yahoo messager can u please PM with ur details saw we can chat live?
Thank's
Try to change the band
HOW?
Radio does not work after unlock
Got the unlock code from Cingular. The code was accepted. Entered T-Mobile SIM but then phone will not make or receive calls. Even after putting original Cingular SIM it will not work.
Inserted another Cingular SIM and attempted call. It starts working. However, if I put T-Mobile SIM it would go back to same state.
Any help would be appreciated.
It is MDA 3 from Siemens for Cingular with Radio version 1.02.10
No matter what radio I upgrade to I have no service on my 8525, some radio roms even say no service even when the sim card isn't in. other roms just continually search and then eventually say no service. It is not the sim card, it works perfectly in my other cingular phones, and my device is unlocked anyways.
Does anyone know what the problem could be and how I would fix it? it is not the OS rom, it happens with both WM5 and WM6, everything else works with the phone, well actually my microphone wasn't working for cellular calls (when i still could make them) it would only work for the voice recorder
when I used the check image command in mtty, i got this
Cmd>checkimage
IPL CRC checksum = 0x50C4A5F0
SPL CRC checksum = 0xC27E0E42
CE CRC checksum = 0xF21F01B9
ExtROM CRC checksum = 0xB924B6BA
Radio Image CRC checksum = 0xB845CC64
Cmd>
BTW, why does it say Cmd instead of usb, what does this mean?
I got the same CRC in my Radio (version is 1.51.00.10):
IPL CRC checksum = 0x80C8FEE6
SPL CRC checksum = 0x327DEB48
CE CRC checksum = 0xE6F4D57A
ExtROM CRC checksum = 0xA9AB06C9
Radio Image CRC checksum = 0xB845CC64
And I got no problems with SIM. Maybe it's a hardware related problem (antenna or something like this).
When you flash a radio rom, does it change everything that has to do with the cellular connection? or could something have been changed that wasn't supposed to be like how people were losing their wifi because the eeprom chip was getting erased due to OS flashing
Iv'e given up, i've flashed countless radios, and they all say no service, even when there is a sim card in it, and for some reason it doesnt even say when there isn't a sim card in there. Does anyone want to buy it off me?
cjchriscj said:
Iv'e given up, i've flashed countless radios, and they all say no service, even when there is a sim card in it, and for some reason it doesnt even say when there isn't a sim card in there. Does anyone want to buy it off me?
Click to expand...
Click to collapse
Scratch that, how about I pay the first person that helps me to fix it on my own $30 via paypal, and you will help me over AIM (---------), so no one can "copy" someone else.
It seems that the only radio that recognizes when I do and do not have a sim in is the 1.16 one, and even then it has no service, although it ocassionaly searches, only to say no service once again.
Also, Sim Manager, and the Phone under settings will not open
Check with your provider that the IMEI of your phone has not been blocked. You should test this with a sim card from another network, but also it's worth phoning up your provider and asking them to check if your IMEI has been blocked as it doesn't propagate to all networks instantly.
This happened to me with similar symptoms, fortunately it occurred as a mistake of T-Mobile when they were blocking the current phone of the person who owned my phone originally.
my radio too would not connect.
also my mtty.exe would not connect,
i put the phone in bootloader mode and open mmty.exe, select US to connect but get error says "usb port can not open"?
I have a white Softbank X01HT version of Hermes.
Since the OS is Japanese i cannot read but i am a WM user already so i could find my way through.
I turned it on and did not let the ext rom install, also Also, i ran the Hermes Unlocker V3a.
It said Unlocked SIM and Cuper CID unlocked.
Also, i checked the Windows folder on the device and could not see a file names upd.log, so i assume
the ext rom did not install.
Now i put my sim it does not ask for an Unlock code so i guess phone's unlocked. But i got an USIM screen
asking for passsword i guess in japanese, which i think is the vodafone software lock, so to remove it i ran
the file from imei-check.co.uk and i think it worked although my phone had frozen showing a large unlock icon
on screen, so i soft reset and this time i dont see the usim screen again with my non vodafone sim inserted.
But neither does it get a gsm signal, all i could see is an "exclamation !" sign besides the signal icon.
I then did the HardSPL v7 Flashing and then upgraded my radio to 1.43, still no luck with GSM signal.
What to do?
Shall i flash to a English ROM? if yes then which one?
Plss help.
Thanks,
Michelle
I put in a t-mobile sim, and its recognized, and I get a couple of bars, however if i turn off the radio it will not let me turn it back on, and sometimes, randomly i will get no service, normally where i have full bars.
also, i have to softreset the phone to get a signal no matter how long i wait
Radio Worked Now
Okay i was not sure what it was but i ran the Hermes Unlocker like 3 times and on the third attempt it worked, now i can see radio signals and make/recv. calls.
Wonder what caused this, may be i made some mistake running the unlocker first time around but even then phone should have asked me for an unlock code if sim unlock did not happen, but i am happy it works now.
But i dont think it would help you cos yours i guess is an 8525 and you are on ATT network so you dont require unlocking, but no harm in trying if you wish.
How do you usee mtty.exe?
would not connect for me - i put the phone in bootloader mode and open mmty.exe, select US to connect but get error says "usb port can not open"?
Can you write me the steps for this pls?
I just want to know what my Boot loader version is.
Even though you have bars on T-Mo, make sure you can make calls etc - when my IMEI was blocked, o2 would report no service, but T-Mobile gave me a signal. However, I could not make calls on text with the T-Mo sim despite having signal.
Oliy said:
Even though you have bars on T-Mo, make sure you can make calls etc - when my IMEI was blocked, o2 would report no service, but T-Mobile gave me a signal. However, I could not make calls on text with the T-Mo sim despite having signal.
Click to expand...
Click to collapse
I could make and recieve calls and make and recieve text messages.
cjchriscj: glad to see that rerunning the unlocker did fix the problem
todd_jg said:
cjchriscj: glad to see that rerunning the unlocker did fix the problem
Click to expand...
Click to collapse
I wish it fixed the problem, I have to turn my phone off during school, and its a hassle to have to reset it every time I lose service, and after i turn the radio off. Also I called cingular and they did not block my IMEI, and I tried a different cingular sim and it didn't work. Thats very odd, maybe it has something to do with the band.
This seems hopeless. Does anyone have an estimate of how much it would cost to have HTC repair my phone?
cjchriscj said:
This seems hopeless. Does anyone have an estimate of how much it would cost to have HTC repair my phone?
Click to expand...
Click to collapse
Or would anyone like to buy it?
Anyone solved this as i am having a simalur problem
Nope not yet. I'm going to try and run the unlocket a couple of more times
I have a magician which was sim locked to T-Mobile.
Thanks to the tools offered, I was able to un-lock the phone and use it on O2 for 3 years.
I had a problem with the phone and had to re-install the ROM from the CD supplied by T-mobile. Upon doing so, the phone has locked itself to T-Mobile again and will not accept any other sim cards. I have tried O2, Vodafone and Orange.
The phone itself has now got Windows 6.1 by Cotulla, but as mentioned above, I can only use it on T-Mobile.
I have tried:
Lokiwiz (error message)
xdadev_all_unlock says the following:
xdadev_all_unlock started
device=HTC Magician
xdadev_all_unlock started
device=HTC Magician
xdadev_all_unlock started
device=HTC Magician
could not find security key for device type HTC Magician
xdadev_all_unlock failed
xdaSimlock
xda2unlock-v2.2 (says "found all locks to be already unlocked!"
The device still won't allow me to use any other sim cards. T-Mobile supply a code for £29.00 but it's not guaranteed to work and I've already tried it once. Does anyone know where the code is stored and if it can be removed manually? I have seen other threads stating that it should ask me for a security code if I use a different sim, but my phone does not do this. All it shows on the main screen is the antenna with an exclamation mark. With a T-mobile sim, it gets a full signal. I really want to be able to use this phone with other networks.
I will be very grateful to anyone out there that can help please??
Kind Regards,
Jp
Please, I know someone out there can help me out. Any suggestions or ideas? Help me out please????
Update
I have been trying to get this phone sorted, so I thought, why not go back to the old ROM - WM2003SE. I uploaded this and the phone briefly unlocked. I even made a call to the top up service on O2.
It then lost the network and was searching for it, after which it goes back to the previous state "No Service".
Please help!!!
HELP!!!
Firstly, Merry Xmas to you all.
Once again, I am requesting for someone to advise me on this problem. Please help me out.
Your help will be most appreciated.
Cheers,
Jp
I got unlock code from Orange for the Orange HTC Mozart. It did accept the code and accepted the non-Orange SIM but showing no signal. I have tried with other non-Orange SIMs but still no service (no signal) but as soon as I put my orange sim back in, it worked fine for both 3G and 2G signals.
Does this mean that the code provided only did the SIM unlocking function but not the carrier unlocking bit. BTW, although orange mentioned in the instruction that phone will ask for code two times, but in my case it only asked once.
Orange seems to fail even to understand the problem. any tip / trick?
ZeeShh said:
I got unlock code from Orange for the Orange HTC Mozart. It did accept the code and accepted the non-Orange SIM but showing no signal. I have tried with other non-Orange SIMs but still no service (no signal) but as soon as I put my orange sim back in, it worked fine for both 3G and 2G signals.
Does this mean that the code provided only did the SIM unlocking function but not the carrier unlocking bit. BTW, although orange mentioned in the instruction that phone will ask for code two times, but in my case it only asked once.
Orange seems to fail even to understand the problem. any tip / trick?
Click to expand...
Click to collapse
Hi,
You can tell them to give you a new one cause is needed for abroad use, they have to
Probably the code was not a proper one
Regards, ansar
thanks Ansar, I reset to factory setting twice and it now all working, with any carrier SIM and for 2G/3G. I think some thing was just stuck after accepting the code. but any way it's working now
thanks.
ZeeShh said:
thanks Ansar, I reset to factory setting twice and it now all working, with any carrier SIM and for 2G/3G. I think some thing was just stuck after accepting the code. but any way it's working now
thanks.
Click to expand...
Click to collapse
Hi,
Glad you fix it!
Regards, ansar
hi
i have same problem but still cant fix it
i have trophy from vodafone i buy code and enter mobile show code accpeted oki
but now now signal in any sim in our countery(egypt)
with orignal sim phone have network normal
i make hard reset and flash orignal rom but phone still no service
thk
vodafone_banha said:
hi
i have same problem but still cant fix it
i have trophy from vodafone i buy code and enter mobile show code accpeted oki
but now now signal in any sim in our countery(egypt)
with orignal sim phone have network normal
i make hard reset and flash orignal rom but phone still no service
thk
Click to expand...
Click to collapse
Hi,
You must post to Trophy forum
Regards, ansar
Anyone tried running connection setup to get correct settings for the new sim?