Hello everybody,
Since yesterday my Xda doesn't work anymore. I tried to sync an image to my Xda, and then i got a strange stripe over my screen. I reset the device, and then the screen went blank and faded into blue stripes. When i put it in my docking it gives the noice of synchronizing. But i see nothing ... I already made a back-up and tried to reset it, soft and hard.
I doesn't work, who can help me?
Thanks!
Dennis
looks like a screen connector problem ... have you dropped it or something ?
No... what do then???
there are VERY few virus's out for pocketpc's
even non of them would ever be able to stray there
after a hardreset
i would say that it's a hardware issue
Maybe something with my bios? I can approach my Pocket pc through my computer. The screen goes from white until a white screen with stripes...
What to do?
Related
Hi All
I have just replaced a faulty microphone in my XDA o2 and when I put it all back together Iand reset the device it is now showing a reversed mirror display What have I done wrong and can it be easily fixed ?
Thanks in advance
waam
if hardreset dont help it sounds like you put the screen upside down
Hmm....
Rudegar said:
if hardreset dont help it sounds like you put the screen upside down
Click to expand...
Click to collapse
I didnt actually remove the screen .. I unfolded the mainboard and inserted the replacement mic and closed it all up and now it is a reversed image it appears as if the I am inside the O2 looking out I had not removed the LCD at all from the board so it is in the correct way just not showing the correct image i will try and post a picture if you want
Cheers
Waam
Mirrored Display
hello XDA community,
I have here an imate Jasjar which after a screen upgrade is displaying the image reversed. It did not begin like this,
Upon first booting up the device after screen upgrade, all was fine, screen displayed normally. About a week after this, the screen began flickering, not on/off, but instead, reversing the image shown on the screen. (a mirror) effect. I did not know what to make of this. I delt with it best I could.
A day or two after this flickering began, the screen began to remain in this reversed image mode, which I did not enjoy. The same day, I had dropped the JJ into a tub ( a pretty hard fall), but somehow, by the grace of god, the water failed to enter the inside of the Jasjar.
After the fall, I had noticed that the screen had stopped its flickring antics and remained normal for about a week and a half. It is now displaying a reversed image only.
I now am unsure of what to do, I searched throughout the XDA forums and discovered that performing a hard reset should repair this.
I suppose my main question is, is there a registry tweak I can perform to revert the displayed image back to its original state
Many thanks to all who respond.
John
EdmundsProductions
DeserteDNJ.com
as far as I know, both of your devices are probably dead. Back in the time I was repairing old Ipaq's the mirrow effect was epically called "The mirrow of death" and meant that the display controller (a chip) has failed.
I'm not 100% sure, but I don't think you have many chances to bring them back. Maybe this is not your case, but anyway chances are slim.
thats actually a very interesting idea. If you can mirror them via software, you can fool the device into working again
solution ?
Any solution to this yet ?
Is anyone working on that brilliant idea of that mirroring software ?
I've been having the same problem for almost 6 months now. But for some reasons I am surviving with my O2 XDA EXEC. Now, I can hand my brick to friends without being concerned about my personal messages being read.
However, I have found something. When I charge my phone with a motorola charger, while on charger, the screen flips back to normal. So, my best bet- it is actually a tweeny weenie IC not doing what it is supposed to do.
mirror solution!
Tape the phone to your car's dash and use it as a H.U.D.!!!
hey.... maybe I am on to something here mmmm.....
Frogger said:
Tape the phone to your car's dash and use it as a H.U.D.!!!
hey.... maybe I am on to something here mmmm.....
Click to expand...
Click to collapse
Does anyone know how to make the PDA do this, I've searched everywhere for a software solution but to no avail.
I want to add a second screen to my PDA (piggybacking on the existing screen) but with an inverted display. This way I will have a normal touchscreen display for entering data and an inverted display for HUD use.
I'm aware that when this happens as a fault it is normally due to a loose display connection causing one of the outer contact to come loose, but I'd need to know which 'wire to cut' to force this fault.
Any help would be greatly appreciated.
Hello all the wizards of this site!
I own a Touch cruise for abt 1,5 years. Have always been a fan of this site and used cooked ROM's from the very beginning. Now the problem with my device.
I took it from my pocket and put it on a table. Afterwards when taking the phone I had a missed appointment on my screen. Trying to dismiss it I noticed the screen didn't react to any touches. So at first I thought the device had hanged. Soft reset but nothing..I couldn't even dismiss the alert as the screen didn't react. That's the first time I thought the screen might be broken. So I did some research from the internet and found that a Hard Reset might help. Tried hard resetting but couldn't do it. I'm pushing the Internet Explorer and GPS buttons (lower softkeys) and pushing the stylus to reset button but nothing...just a soft reset. So I thought I'd install a new ROM as that should also erase everything from the devices memory...nothing. The new rom is installed but I'm now stock in the screen alignment Touching the screen doesn't work where the cross is..as I run my finger all across the screen it seems that lower left part is kind of responsive as the small cross moves when I touch the lower left part of the screen. Now I noticed that the screen has an oily line in the center of the screen...
so what am I to do? Screen broken? Why can't I hard reset then? The warranty of course is for 2 years but I'm quite sceptical if this goes under warranty..they can alway say that something has hitted the screen or smthng.
Any knowledge and help is appreciated..
thank you in advance
dep w/ broken device
check this out
hello depeche,
u might find your topic discussed here
http://forum.xda-developers.com/archive/index.php/t-475294.html
good luck
same happen to me on may, and i send it to htc. They replaced all the front of my polaris wich was scrached
Hi,
I dropped my Galaxy S2 Yesterday (have no idea if this relates to it) But i plugged it into the charger this morning and everything was blue & some of the screen had turned black and some icons had burnt into the screen it looked like.
After taking it with me because it was still usable, Its not completely black except for maybe the faintest part of blue.
Im running Lite'ning rom, The newest one im pretty sure.
Just wondering if this is a virus? Or the screen is dead. I just cant see how it could suddenly die when it was flat and not turned on.
Phones not under warranty by the way. So maybe you could give me some options?
Thanks heaps guys
Probably the problem is hardware related due to the fall, but you could back all your data and try to do a factory reset to see if it fixes or not. If it doesn't fix maybe you should check your screen hardware.
Thanks for the reply,
I just reflashed Litening with Odin 1.85 and still nothing, I get the vibrations, touch lights, sound ect, But only occasionally a tiny little strip of blue along the top.
How would i check my screen hardware? Because i pulled apart my galaxy s after it died and accidently cracked the screen & Glass
How would i do a factory reset by the way? Since i cant see anything
I'd imagine it's dead. I'd take it to your local store and ask for an estimate on how much it would cost to fix it. If you can't see anything, then the screen is either broken or it got disconnected (or maybe some of the ribbons did at least).
Yeah, I just dont really wanna take the phone apart unless i know its likley to fix it.
When i first got it, I noticed it had black splotches on the screen in very dim light on a white background. Nd im guessing id have to almost buy a whole front screen assembly to replace the front screen D:.
Would i be better just to sell the phone how it is? Or repair it?
Hello!
My phone fell from a high place some weeks ago and the screen shattered. Touch was unresponsive, clicking everywehere, but LCD was fine, i could see everything on screen normally.
Ordered a new screen. Changed it, but when I turned it on, only backlight of the LCD was visible, but it was displaying nothing. I thought it was a defective screen (either way, it was, lots of stuck pixels), sent it back and bought another from the same seller. When I changed it and turned it on, again, no video output, lcd would light on but woundn't display nothing on screen. Googled a bit, found out it could be a defective fuse on the motherboard, and that soldering it again would solve. I know nothing about this kind of stuff, so I picked up a tweezers and apllied a little force on every fuse, because I thougth that way I could try to solve it. Well, it worked, kinda. I put the screen above that blue plastic glue only for testing, and it worked, I felt reliefed for seeing sony boot logo again. Figuring out it had worked, i took out the screen, took out the blue plastic, and glued the screen back on. For my surprise, it had the same problem as before, and it doesn't matter what I do now, it wont work anymore, only displays a black backlight with no video.
Could anyone help me out with this? Give me a hint of why it worked once but not anymore. Could it be there's really a defective fuse, or it was just a coincidence that it worked after it had force apllied? Also, the Screen flex is kinda loose, it keeps coming off all the time, and it's really hard to plug it to the LCD sometimes, is it supposed to be like that, or could it be the culprit? Also, touch is working normally, i can't see nothing on screen but i can click and feel it vibrating.
It's kind of a big text, but that's the way I could explain it. Sorry for the bad english, it's not my native language.
And thanks in advance if anyone can help!
Hi to all!
I have a problem with my phone. I dropped my XZ1 from a high level, luckily the phone does not have any scratch etc, but when i am trying to boot the phone, the phone shows the Android and XPERIA logo, shows 3 dots in a grey background and the screen goes black.
I tried to repair it with Xperia Companion but nothing happens. Also, i tried to flash it, everything goes smooth but again when i boot the phone after the flashing, the phone shows the Android and XPERIA logo, 3 black dots in a grey background and the screen goes black.
Does this happened to anyone? Is there any workaround for this issue?
Many thanks in advance.
P.S. I tried to fix it in a repair shop, and the clerk had no idea how to fix it.
MRmrgran said:
Hi to all!
I have a problem with my phone. I dropped my XZ1 from a high level, luckily the phone does not have any scratch etc, but when i am trying to boot the phone, the phone shows the Android and XPERIA logo, shows 3 dots in a grey background and the screen goes black.
I tried to repair it with Xperia Companion but nothing happens. Also, i tried to flash it, everything goes smooth but again when i boot the phone after the flashing, the phone shows the Android and XPERIA logo, 3 black dots in a grey background and the screen goes black.
Does this happened to anyone? Is there any workaround for this issue?
Many thanks in advance.
P.S. I tried to fix it in a repair shop, and the clerk had no idea how to fix it.
Click to expand...
Click to collapse
there seems to be damage to the screen
Have you ever tried to replace the screen with a new one?
if that doesn't work, there may have to replace one part of the engine .
starvirus10 said:
there seems to be damage to the screen
Have you ever tried to replace the screen with a new one?
if that doesn't work, there may have to replace one part of the engine .
Click to expand...
Click to collapse
I will try your solution to the problem and I will inform you asap. Many thanks for your help!
There might be a crack in soldering between board and chip...