I Cant Make Full Backup, Need Help (g4) Cingular 8125 Sim & Cid Unlocked
--------------------------------------------------------------------------------
I have tryied everything nothing had worked I'm able to Backup OS & Extended Rom. Not a nubby even doing sd backup happens same thing I can make individual backup like IPL, SPL, Extended Rom, OS ect. But I want full backup and I cant. When I use aWizard it does great job but on the radio.nba part this is the message that comes out. I have tryied everithing all the programs availables on all forum this has been a 8 day proyect please some one can help me. HELP HELP HELP HELP HELP HELP HELP HELP HELP. ITS A CINGULAR 8125 (G4) UNLOCKED SIM & CID BY CHECK-IMEI. PLEASE SOMEBODY ANY ADVISE.
THIS IS DOING IT WITH SD
r2sd all
R2SDBackup() Pls. insert SD card !!
Cmd>r2sd all
***** user area size = 0x3B880000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
Start address = 0x80000000 , Length = 0x800
Start address = 0x80000800 , Length = 0xC0000
Start address = 0x800C0800 , Length = 0x40000
Start address = 0x80100800 , Length = 0x280000
GSM - dwSize = 345DF
GSM Page0
Start address = 0x4E3D4C0 , Length = 0x3900000
Start address = 0x743D4C0 , Length = 0xA00000
The read size is not matched, load failed!
Some Image (8) load failed, we can not backup All images...
Cmd>
============== aWizard 1.3 beta 2 ===============
- By ahlok_hk -
__________________________________________
- [Credits] -
- itsme for 'itsutils' -
- MachinaGod for 'RapiUnlocker' -
- MachinaGod for 'lokiwiz' -
- mamaich for 'WM5 ROM editing tool' -
- psneddon and kenu for Logo Converter -
- nicob for scripting tips -
- xda-developers.com, buzzdev.net n oths -
__________________________________________
* Please Choose one of the following options:
a - View README file
e - Enable RAPI (Run this after each hard reset)
u - Unlock CID (!!!PLEASE RUN THIS ONE TIME FIRST!!!)
b - Backup Radio, OS and Extended ROM from device
s - Write Backup Splash Logo (.nba) to Wizard
c - Convert + write BMP(240x320) Splash Logo to Wizard
r - Write Radio ROM to device (!! RUN unlock CID 1st !!)
w - Write OS ROM to device (!! RUN unlock CID 1st !!)
q - Quit this program
__________________________________________
!!! ATTENTION! Please use this tool at your own risk!!!
__________________________________________
* Type letter then press [Enter]:B
* Backup Wizard ROM Version 1.0
* Please enter the name of "folder" to save the ROM image to (e.g. "QT-1_6_3_4-W
WE"), no space pls
* Then press [Enter], or q to to main menu:radio
* Backup Radio ROM? (y/n/q):Y
* Backup OS ROM? (y/n/q):N
* Backup Extended ROM? (y/n/q):N
* Backup Splash ROM and HTC Logo? (y/n/q):N
* Please make sure the following before running this option:
* - your have connected your Wizard to the PC with USB ActiveSync connection,
* - already run the option 'e' at least once after the last time you hard reset
the Wizard
* then press [Enter] to start, or q to main menu:
[14:29:32.28] Backup Radio ROM [ROM\radio\radio-Radio.nba] Start
* This process takes about 5 to 8 minutes depends on CPU Speed.
* Please wait.....
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 39 07 01 06 27 2c 17 3e 17 05 06 ec
CopyTFFSToFile(0x50000, 0x280000, ROM\radio\radio-Radio.nba)
ERROR: ITReadDisk: outbuf==NULL
[14:30:18.59] Backup Radio ROM [ROM\radio\radio-Radio.nba] End
Press any key to continue . . .
i have tried this hack and it does not work for me. i have the htc x7500
does it work for you
thanks
Change the display of the clock in the taskbar
The clock in the taskbar can be changed to show not only the time, but also the date, or just the date, or nothing at all.
To show nothing:
HKLM\Software\Microsoft\Shell\TBOpt = 0 (DWORD decimal)
To show just the clock:
HKLM\Software\Microsoft\Shell\TBOpt = 1 (DWORD decimal)
To show just the date:
HKLM\Software\Microsoft\Shell\TBOpt = 2 (DWORD decimal)
To show both the date and the clock:
HKLM\Software\Microsoft\Shell\TBOpt = 3 (DWORD decimal)
date and time on the tb
for me following cab works ok, but I have other problem - when keyboard is closed on the visible bar I see only full hours - instead of 22:36 I see only 22:00 till 23. Anyone has a clue how to change it?
try moving the volume button up when the mini display is on
irus said:
try moving the volume button up when the mini display is on
Click to expand...
Click to collapse
Wow, I didn't even know that the mini display changed! I didn't have any problems showing the minutes, but I did not know about the volume button changing the display
thanks for the suggestion.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\
Create a binary value named "TBOpt" and set its value to "13 00 00 00
then
1) Open ur registry editor (either PHM Registry Editor or Resco Explorer 2003).
2) Go to HKEY_LOCAL_MACHINE\nls\overrides
3) Create 1st String Value: Name = S1159 & String = Am
4) Create 2nd String Value: Name = S2359 & String = Pm
5) Create 3rd String Value: Name = STFmt & String = hh:mm t'M '
6) Soft-reset.
Hello all!
Currently working on identifying which parameters are causing the Nike to identify which Keyboard to use. Don't hope that the parameters are deeper in the ROM...
Can somebody with an 16 Keypad version (P5500) look which registry value following key contains:
HKEY_LOCAL_MACHINE\Software\OEM\Qwerty\Layout -- my Value: "1033" dec
I am currently using following ROM: US_Niki_6.1_V1.0_s600_touch.dll
If anybody has already clues, please share
thx and gtx qp
I have a 16 key version (P5500) and the value in the registry is: 2052
As I have the problem with the hardware keyboard (20 keys) I just flashed the original rom of O2 germany back and looked at HKEY_LOCAL_MACHINE\Software\OEM\Qwerty\Layout. In the original ROM I have 1031 and in the Tom-Niki-Project-2.1.3 I have 2052 which gives me a 16 key keyboard.
After changing the value from 2052 to 1031 I got back my 20 keys keyboard.
Hope this helps.
Thanks guys for the Info!
I've tried to change the value to "2052" but it does not give me the 16 Key Layout.
I will try flashing the Tom-Niki-Project ROM.
greetings!
Programs Used in JMLToday <= 5.92
Post#2 : Programs Informations
JMLPicture.exe See Post#3
Build a picture from multiple images/texts
JMLMenu.exe
Displays a context popup menu.
JMLComm.exe
Phone on/flight-mode, Wifi on/off, BT on/off/discoverable, Data on/off
JMLCalendar.exe
Saves the next appointments in registry
JMLSms.exe
Saves SMS in registry
JMLContacts.exe
Saves the next birthdays/anniversaries AND Favorites contacts in registry
JMLMeteo.exe
Saves the MSN or ACCU or GOOGLE weather informations in registry
JMLTasks.exe
Saves the next tasks in registry
Programs Informations
JMLMenu v1.80
The menu is configurable via a .mnu file :
- The main menu is [Menu]
- One element per line of menu : label= program;parameters
- One section per submenu : use [] -> label=[mysubmenu]
- External submenu (.mnu file) : use {} -> label={filesubmenu.mnu}
- Separator : sepX=SEPARATOR (X=unique number)
Parameters :
Code:
[b][color=red]-execute[/color][/b] if menu as once choice, it execute it immediately (menu not show)
[b]-x:[/b]X = X coordinate (X clic per default)
[b]-y:[/b]Y = Y coordinate (Y clic per default)
[b]-timeout:[/b]N = timeout in seconds to hide menu (10s per default)
Example : JMLAction.mnu
Code:
[Menu]
Restart Titanium=%JMLTODAY%\JMLToday.exe;-refresh
Update=%JMLTODAY%\JMLToday.exe;-update
Weather=%JMLTODAY%\JMLMeteo.exe;-jmltoday
Configuration=[color=blue][b][Config][/b][/color]
Parameters=[color=blue][b]{JMLParameters.mnu}[/b][/color]
[color=blue][b][Config][/b][/color]
Clock=%WINDOWS%\ctlpnl.exe;cplmain.cpl,16,0
Skin=%JMLTODAY%\JMLTodaySkins.mscr
City=%JMLTODAY%\JMLTodayVille.mscr
Language=%JMLTODAY%\JMLLang.mscr
To Launch :
- in a .pnx file : %JMLTODAY%\JMLMenu.exe;JMLAction.mnu
- in a .mscr script : Run(instPath&"\JMLMenu.exe","JMLAction.mnu")
---------------------------------------------------------------------------------
JMLComm v1.98
Parameters :
Code:
[color=red]-vibrate:duration[/color] = make a vibration (duration=25ms per default)
[color=red]-volume[/color] = toggle vibrate/mute/normal mode[color=red]
-volume:mode[/color] = volume mode : [b]vibrate,mute, normal[/b]
[color=red]-volume:level[/color] = volume level : [b]silent,verylow,low,medium,high,loud[/b]
[color=red]-backlight[/color] = toggle auto/manual mode
[color=red]-backlight:mode[/color] = backlight mode : [b]auto,manual[/b]
[color=red]-backlight:level[/color] = backlight level : [b]mini,low,medium,high,maxi[/b]
[color=red]-gps:timeout[/color] = store latitude/longitude in HKCU\\Software\\JML\\Comm (timeout=60s per defaut)
[color=red]-status[/color] = store some informations in HKCU\\Software\\JML\\Comm
-data = toggle on/off data-connection
-data:on = switch ON data-connection
-data:off = switch OFF data-connection
-phone = toggle on/off phone
-phone:on = switch ON phone
-phone:off = switch OFF phone
-flight = toggle on/off flight-mode
-flight:on = switch OFF phone, wifi, bluetooth
-flight:off = switch ON phone
-bt = toggle 3 states bluetooth
-bt:on = switch ON bluetooth
-bt:discoverable = switch ON with discoverable mode bluetooth
-bt:off = switch OFF bluetooth
-bt2 = toggle on/off bluetooth
-bt2:on = switch ON bluetooth
-bt2:off = switch OFF bluetooth
-wifi = toggle on/off wifi
-wifi:on = switch ON wifi
-wifi:off = switch OFF wifi
Example : turn OFF bluetooth
Code:
instPath = SystemPath( "ScriptPath" )
RunWait(instPath&"\JMLComm.exe", "-bt:off")
exit
---------------------------------------------------------------------------------
JMLCalendar v2.45
Registry structure:
Code:
[HKEY_CURRENT_USER\Software\JML\[color=green][b]Calendar[/b][/color]]
"total" = dword: number of appointments found
[HKEY_CURRENT_USER Software\JML\[b]Calendar[/b]\Cal[color=orange][b]N[/b][/color]]
"oid" = oid item in poom database
"allday" = 0=FALSE, 1=TRUE
"categories" = list of categories
...
"subject" = subject
Parameters for searching :
Code:
-max:N = maximum number wanted (5 per default)
-days:N = number of days involved (5 per default)
-reg:key = registry key to store ("[color=green][b]Calendar[/b][/color]" per default)
Parameters for appointment :
Code:
-dateview:[color=orange][b]N[/b][/color] = open poutlook.exe to view the appointment number N
-deleteall:end = delete all [b]ended[/b] appointments (except reccurring appointments)
-deleteoid:oid = delete an appointment identified by his oid
-notifyoid:oid = show an appointment identified by his oid
---------------------------------------------------------------------------------
JMLSms v1.80
Registry structure:
Code:
[HKEY_CURRENT_USER\Software\JML\[b]Sms[/b]]
"total" = dword: number of SMS found
[HKEY_CURRENT_USER Software\JML\[b]Sms[/b]\Sms[color=orange][b]N[/b][/color]]
"oid" = oid item in SMS in database
"unread" = 1 if unread SMS, 0 otherwise
...
"subject"= subject
Parameters for searching :
Code:
-max:N = maximum number wanted (5 per default)
-read:all = last all type SMS (last unread per default)
-reg:key = registry key to store ("[color=green]Sms[/color]" per default)
Parameters for sms :
Code:
[color=red]-phone:phone-number[/color] = Call a phone number
-reply:[color=orange][b]N[/b][/color] = Send a response SMS
-reply:[color=orange][b]N[/b][/color] = [color=red]-text:"my text"[/color] = Send a pre-defined text response SMS
-mark:[color=orange][b]N[/b][/color] = Mark as read the SMS
-mark:all = Mark as read all SMS
-markid:oid = Mark as read the SMS identified by his oid
-delete:[color=orange][b]N[/b][/color] = Delete the SMS
-delete:all = Delete all SMS
-delete:unread = Delete all Unread SMS
-deleteid:oid = Delete the SMS identified by his oid
-call:[color=orange][b]N[/b][/color] = Call in response to SMS (in order if exist : sender, mobilePhone, homePhone)
-notify:[color=orange][b]N[/b][/color] = show the SMS
-notifyid:oid = show the SMS identified by his oid
-sms:phone-number = Send a response SMS
-sms:phone-number = [color=red]-text:"my text"[/color] = Send a pre-defined text response SMS
---------------------------------------------------------------------------------
JMLContacts v1.95
Registry structure :
Code:
[HKEY_CURRENT_USER\Software\JML\[b]Contacts[/b]\Anniversaries]
"total" = dword: number of contacts found
[HKEY_CURRENT_USER Software\JML\[b]Contacts[/b]\Anniversary[color=orange][b]N[/b][/color]]
"oid" = oid of Contact in database
...
[b][/b]
"picture"= full path of picture file name (in \My Documents\My Pictures...)
Idem for Favorites : in [HKEY_CURRENT_USER\Software\JML\Contacts\Favorites]
Parameters for searching :
Code:
-max:N = maximum number wanted (5 per default)
-days:N = number of days involved (30 per default)
-reg:key = registry key to store ("[color=green][b]Contacts[/b][/color]" per default)
-anniversaries = search in 'Anniversary' field of contact
-birthdays = search in 'Birthday' field of contact
-anniversaries -birthdays are per default
Parameters for contact :
Code:
[color=red]-call:N[/color] = Call a contact
[color=red]-email:address -account:account[/color] = Send a email from an account-name (Outlook per default)
[color=red]-addfavorite:N[/color] = Add a new favorite contact
[color=red]-removefavorite:N[/color] = Remove a favorite contact
[color=red]-callfavorite:N[/color] = Call a favorite contact
-phone:phone-number = Call phone number
-sms:phone-number = Send SMS to phone number
-smsoid:oid = Send SMS to phone number to contact identified by his oid
---------------------------------------------------------------------------------
JMLMeteo v2.55
Registry structure:
Code:
[HKEY_CURRENT_USER\Software\JML\Meteo]
"total" = dword: number of days found
...
[HKEY_CURRENT_USER Software\JML\Meteo\Current]
...
[HKEY_CURRENT_USER Software\JML\Meteo\DayN]
...
Parameters :
Code:
[color=red]-gps[/color] : acquire gps location (as JMLComm.exe)
-msn:code = city code (ex. : [b]FRXX0016[/b])
-lang:ll-ll = language (en-en per default)
-degree:C = C or F (C per default)
-map:m = number of map to download
-accu:code = city code (ex. : [b]EUR|FR|FR002|BORDEAUX[/b])
-metric: = 1 or 0 (1 per default)
-google:code = city code (ex. : [b]Bordeaux[/b])
-lang:ll = language (en per default)
-degree:C = C or F (C per default)
GPS location with built-in jmlPosition:
Code:
-gps
-accu:[b]jmlPosition[/b]
-metric: = 1 or 0 (1 per default)
OR Acquire GPS-location with JMLComm.exe and next call JMLMeteo with :
Code:
-accu:[b]jmlPosition[/b]
-metric: = 1 or 0 (1 per default)
GPS location with Sleuth's myLocation Service :
- first, install http://forum.xda-developers.com/showthread.php?t=607102
- use it to update Latitude/Longitude coordinates
- next, call JMLMeteo.exe with these parameters :
Code:
-accu:[b]myLocation[/b]
-metric: = 1 or 0 (1 per default)
GPS location with Google Latitude:
- first, copy your googleLatitude account in google.ID file.
- next, call JMLMeteo.exe with these parameters :
Code:
-accu:[b]googleLatitude[/b]
-metric: = 1 or 0 (1 per default)
---------------------------------------------------------------------------------
JMLTasks v1.40
Registry structure:
Code:
[HKEY_CURRENT_USER\Software\JML\[color=green][b]Tasks[/b][/color]]
"total" = dword: number of tasks found
[HKEY_CURRENT_USER Software\JML\[b]Tasks[/b]\Task[color=orange][b]N[/b][/color]]
"oid" = oid item in poom database
"categories" = list of categories
...
"subject" = subject
Parameters for searching :
Code:
-max:N = maximum number wanted (5 per default)
-days:N = number of days involved (5 per default)
-reg:key = registry key to store ("[color=green][b]Tasks[/b]][/color]" per default)
-withCompleted = show all tasks
-sort:due = sort by due tasks
-sort:start = sort by date (per default)
manila = store all tasks in HKEY_LOCAL_MACHINE\Software\HTC\\Manila
Parameters for task :
Code:
-view:[color=orange][b]N[/b][/color] = open poutlook.exe to view the task number N
-delete:[color=orange][b]N[/b][/color] = delete the task number N
-complete:[color=orange][b]N[/b][/color] = complete the task number N
-deleteall:due = delete all [b]due[/b] tasks
-deleteall:completed = delete all [b]completed[/b] tasks
-deleteoid:oid = delete the task identified by his oid
-completeoid:oid = complete the task identified by his oid
---------------------------------------------------------------------------------
JMLFavorites v1.00 (SOON)
Registry structure :
Code:
[HKEY_CURRENT_USER\Software\JML\[b]Favorites[/b]]
[HKEY_CURRENT_USER Software\JML\[b]Favorites[/b]\Favorite[color=orange][b]N[/b][/color]]
"type" = type of favorite : '[color=orange]contact[/color]' or '[color=orange]program[/color]'
"picture"= full path of picture file name
"label"= fistname for contact, filename for program
...
Parameters for favorite :
Code:
-call:N = CALL a contact or RUN a program
-add:N = Add a new favorite (contact per default)
-type:contact = with -add parameter, add a '[color=orange]contact[/color]'
-type:program = with -add parameter, add a '[color=orange]program[/color]'
-remove:N = Remove a favorite
---------------------------------------------------------------------------------
JMLPicture Thank you for offering me a beer. All donations (3€, 5$, +) are appreciated !
Build a picture from multiple images/texts (see picture below).
<Picture...> Parameters :
Code:
[b]Width[/b] result picture with
[b]Height[/b] result picture height
[b]Bkg[/b] initial background color (RGB format)
[b]Transparent[/b] set one color of result picture as transparent (RGB format)
[b]Target[/b] png file name of result picture
[b]Source[/b] png file name of background picture
<Image...> Parameters :
Code:
[b]Left[/b] left-coordinate
[b]Top[/b] top-coordinate
[b]Width[/b] with of displaying picture (with of picture per default)
[b]Height[/b] height of displaying picture (heigh of picture per default)
[b]ScaleStyle[/b]
[b]Alignment[/b]
[b]ID[/b] JMLToday ID ITEM (Page is required)
[b]Page[/b] JMLToday Page ITEM (ID is required)
<Text...> Parameters :
Code:
[b]Left[/b] left-coordinate
[b]Top[/b] top-coordinate
[b]Width[/b] with of displaying text
[b]Height[/b] height of displaying text
[b]Value[/b] text value
[b]FontFamily[/b] font name
[b]FontSize[/b] font size
[b]FontStyle[/b] font style : 'italic', 'bold'
[b]Color[/b] text color (RGB format)
[b]Alignment[/b] 'center', 'right' or 'left' (per default)
[b]ID[/b] JMLToday ID ITEM (Page is required)
[b]Page[/b] JMLToday Page ITEM (ID is required)
Example : ClockText.xml
Code:
<Picture Width="400" Height="200" Bkg="192,192,192" Target="%APPDIR%/ClockText.png">
<Image Left="0" Top="0" ID="BGAMPMALARM" Page="Page1" />
<Image Left="20" Top="40" ID="H1" Page="Page1" />
<Image Left="100" Top="40" ID="H2" Page="Page1" />
<Image Left="225" Top="40" ID="M1" Page="Page1" />
<Image Left="305" Top="40" ID="M2" Page="Page1" />
<Text Left="15" Top="140" Value="AM" Color="128,0,0" FontFamily="Tahoma" FontSize="8" FontStyle="Bold,Italic" />
<Text Left="15" Top="160" ID="City" Page="Page1" FontFamily="Tahoma" FontSize="6" FontStyle="Italic" />
</Picture>
@all : add some program informations ..... in Post#2
A++
Hi.
I sure do love command-line tools! I added them to the Mortscript Source Compendium's list.
And to facilitate my testing them to see if magically they will work with wm5 smartphones, I added a Command-Line tester to The Mortifier. So we can browse to the exe and enter our command line parameters. Keeps the old exe and parameters in memory so you can re-test them easily.
Thanks for these.
Hi.
So i was using Message2reg.exe. It seems with wm653 m2reg gives an error.
I am trying to use jmlsms.exe to see if that can work.
Code:
RunWait(SystemPath("ScriptPath") \ "\Utility\JMLSms.exe","-read:all")
MsgSender = RegRead(HKCU, "\Software\JML\Sms\Sms1", "sender")
MsgBody = RegRead( HKCU,"\Software\JML\Sms\Sms1", "subject")
Think that looks good?
@howdykeith : Yes I think it should work.
StatusTicker and JML...
Hi,
So i incorporated JMLsms.exe and JMLcomm.exe into the StatusTicker.
Works super great!
In future version I will include more of you apps infos... I also will make sure to include the URL to your apps as well.
Thanks much!
Hello,
I'm trying to use JMLContacts.exe to have birthdays on my WAD2 Skin.
I've installed JMLToday and everything worked fine and registry was filled by next 5 birthdays information.
Now I'm trying to update information outside of Titanium/JMLToday and to do it I'm using a mortscript.
Inside script I wrote the following line:
RunWait("\Storage Card\Program Files\UtilsExe\JML\JMLContacts.exe", "-max:3")
Unfortunately it seems not working, at least registry values are not updated. I double checked path and it appears absolutely correct.
More I tried to simply launching JMLContacts.exe directly from TCMD, and I expected it worked with all default values, but of course it didn't... Is my supposition a wrong one?
Meanwhile, thanks a lot to let available for us those little but great tools
@dagosjt :
you must use also -days (0 per default), -birthdays (and /or -anniversaries) parameters
example :
-max:3 -days:365 -birthdays
Ok ? thanks for feedback.
A++
PS : i think i 'll change the default parameters values in a next version...
JMHL said:
@dagosjt :
you must use also -days (0 per default), -birthdays (and /or -anniversaries) parameters
example :
-max:3 -days:365 -birthdays
Ok ? thanks for feedback.
A++
PS : i think i 'll change the default parameters values in a next version...
Click to expand...
Click to collapse
Yes!
Works perfect now I thought days:0 meaning was "all days", sometime it happens in software
HI JMHL
I want to know if JMLMeteo can search for a location based on latitude and longitude
@saeli : not for the moment. Next feature perhaps if more people are interested and if it's easy to hard-coded.
A++
@jmhl: perhaps ypu can use this for location awareness:
forum.xda-developers.com/showthread.php?t=607102
then it could work
Salut
Micha
@Micha : thanks, i look ....
@saeli : ok, weather location based on latitude and longitude certainly in next version.
@micha : thanks for the tips.
A++
JMHL,
Still no HD2 ?
@Zepiii : no. waiting more operator points to change....
A++
@saeli & @all : location based on latitude and longitude in next version of JMLMeteo (in next JMLToday v5.80).
2 ways :
- Sleuth's myLocation Service
- google Latitude
A++
JMHL said:
@saeli & @all : location based on latitude and longitude in next version of JMLMeteo (in next JMLToday v5.80).
2 ways :
- Sleuth's myLocation Service
- google Latitude
A++
Click to expand...
Click to collapse
this is a wery fantastic news
when you think to release new version ?
im using a PPC ( Shift PDA ) Rom . but weather animation dsnt work on today screen for me even after checking the ENABLE SUNRAYS in Cookie Home Tab 2 Editor. if some one could help ??
Maybe you need to slide to Weather tab > Menu and "Enable My Location"?
if you get no other hints, try fiddling with registry,
key: HKCU\Software\HTC\Manila,
entry: Home.WallpaperMode - try changing the value to 1, 2 or 0 (sorry, don't remember which is which) + soft reset after each change - one of them could/should help
p107r0 said:
if you get no other hints, try fiddling with registry,
key: HKCU\Software\HTC\Manila,
entry: Home.WallpaperMode - try changing the value to 1, 2 or 0 (sorry, don't remember which is which) + soft reset after each change - one of them could/should help
Click to expand...
Click to collapse
Bundle of thanx sir it worked . i changed the values to 0 .