My device does not accept data from desktop each deploy to datat from desktop gives me an error . the connector charges properly but doesnt transfer data to device
Do you have usb enabled under settings in activesync on desktop?
reply
ofcourse i have
Related
please help, just yesterday i was able to connect to activesync but now i cant it just stays connecting then it cannot connect but windows detects it as windows CE device here's what ive tried so far:
1. tried the activetoubleshooter :still cannot connect
2. tried a dozen usb cables and connected it through the main usb port: still cannot connect
3. reinstalled activesync (from microsoft site), rebooted pc and my rw6828: still cannot connect
4. disabled windows firewall, rebooted : still cannot connect
5. unchecked the Programs>settings>connections>usb to pc> enable advanced network functionality: still cannot connect ( i noticed that if i unchecked the advanced network functionality and i would got to activesync>menu>connections> "WHEN CRADLED" there's no usb option and if i check the advanced network etc etc it shows the usb option
man this is so annoying, i cannot install anything...hope you guys know what to do, ive been fixing this for the last 7.5 hours non stop with no solution...
did a hard reset and it connected...sigh..wonder what caused it? anyway time to install all the apps again...
zerosynergie said:
did a hard reset and it connected...sigh..wonder what caused it? anyway time to install all the apps again...
Click to expand...
Click to collapse
uncheck the USB to PC if any from your system/connection setting
Goto phone Setting -> Connections -> USB to PC, check whether USB connection is ticked or not...
did that already guys but like what i said:
unchecked the Programs>settings>connections>usb to pc> enable advanced network functionality: still cannot connect ( i noticed that if i unchecked the advanced network functionality and i would got to activesync>menu>connections> "WHEN CRADLED" there's no usb option and if i check the advanced network etc etc it shows the usb option
i finally found the culprit its the pocket mechanic app, i ran all the tests there and deleted some stuff, maybe something with the usb connection got deleted also so beware!
zerosynergie said:
please help, just yesterday i was able to connect to activesync but now i cant it just stays connecting then it cannot connect but windows detects it as windows CE device here's what ive tried so far:
1. tried the activetoubleshooter :still cannot connect
2. tried a dozen usb cables and connected it through the main usb port: still cannot connect
3. reinstalled activesync (from microsoft site), rebooted pc and my rw6828: still cannot connect
4. disabled windows firewall, rebooted : still cannot connect
5. unchecked the Programs>settings>connections>usb to pc> enable advanced network functionality: still cannot connect ( i noticed that if i unchecked the advanced network functionality and i would got to activesync>menu>connections> "WHEN CRADLED" there's no usb option and if i check the advanced network etc etc it shows the usb option
man this is so annoying, i cannot install anything...hope you guys know what to do, ive been fixing this for the last 7.5 hours non stop with no solution...
Click to expand...
Click to collapse
Whose ROM are you using? It is known that some older nhocbanme's 6.1 ROMs have this problem.
Try different ROM. helloworld1 is good.
activesync problem
try this:
download and install activesync 4.5 version
Disable firewall first and then connect the phone to pc.
I have a stock Evo View running Honeycomb 3.2.1. Interestingly, neither of my computers, both mac and pc, will detect my tablet when I connect it by USB. This worked just a few weeks ago when I moved some files onto the device. The tablet charges through USB, but I do not get the notification option to use as USB storage. Within "settings > connect to pc" I've tried a number of configurations (default configuration type = disk drive, charge only) and I have also tried checking and unchecking "ask me about USB connection type whenever I connect my tablet to a PC." Nothing new happened.
Additionally, on the mac, I have the Android File Transfer app installed. When I open that i get a notification that says "No Android Device Found"
Coincidentally, I recently installed the Dropbox desktop beta for Mac which automatically detects pictures on a camera and uploads them to Dropbox. When I connected my device, Dropbox checked my device for pictures because it recognizes it as a camera. I instantly got a system error message saying that my device was not ejected properly. However, the mac never detected my device as a drive. Following that, I tried to connect to my PC and all it does is charge. My PC also does not detect my tablet as a drive. I'm thinking the new dropbox desktop client may have been the culprit for breaking my usb connection between my tablet and mac.
Has anyone else experience this problem? If not, is there a way to rebuild my usb connection between my tablet, mac, and pc?
well i would try uninstalling dropbox
Also in Settings/Applications/Development/Usb debugging should be checked.
Thanks. Appreciate the advice.
I did uninstall dropbox, on the View and on the Mac. That didn't help.
USB Debugging was checked. I can see my device in fastboot and adb. However, neither Mac nor PC will detect my tablet and allow me to mount as a hard drive.
I did a factory data reset and that worked. Both computers will recognize the View and I am receiving the notification "charge only, hard disk, htc sync, etc." again.
I wanted to break the usb connection again to confirm that it was in fact either dropbox's android beta, desktop beta, or a combination of the two. I am fairly certain that something broke the first time around because the desktop beta was able to scan my device for photos without my permission to mount the View as a hard disk. But now I'm having trouble proving this since I haven't been able to break the connection again.
I'm having error on Win10 when I connect my Mipad4 but it works well using the cable to charge. I've also tried a few cables. Is the port faulty?
Try another port.
Check connection settings in Developer options.
You need to authorize the connection first on the Adroid; a popup window will appear if connected*.
Go to Disk Management>scan drives, connect from here.
No joy? Check Event Viewer for error messages.
Try rolling back the driver in Hardware management, or updating it. No driver means no joy! Reboot, always reboot with Windows... it ain't no Android
*this is how a Samsung Android behaves... hopefully this will help; cross platforming.
Play with it...
Hello, I'm facing this problem from many years in my phone, i can't plug in my mate 10 to any pc, it always says usb not recognized,
all drivers installed correcly with hisuite , my cable usb is new,
i changed today the USB charging port of the phone at Huawei care service, and i reset factory the phone , still same problem.
I'm still having the same stock rom on the device,
is the "usb not recognized" problem can be a software problem in the phone? thank you for your experience.
chahine21 said:
Hello, I'm facing this problem from many years in my phone, i can't plug in my mate 10 to any pc, it always says usb not recognized
Click to expand...
Click to collapse
I'll try to help you but I'm not an expert, and yet I've had EVERY problem you seem to be speaking about.
a. I have had broken USB ports
b. I have had broken USB cables
c. I have had the USB drivers not install on Windows
etc.
Given I've had some of the same problems, I feel for you, so my first advice is to simply give up on USB for everything that you can.
Specifically, if you can turn on USB debugging and Wireless debugging in the Developer options, you can operate the phone over Wi-Fi using the Windows monitor, keyboard and mouse as shown in my screenshots below.
You don't need anything installed on Android to use these FOSS solutions on Windows to operate the entire phone over Wi-Fi as of Android 12 (which eliminated the need for an initial USB connection to establish the Wi-Fi connection).
In summary, I have had similar problems with USB where I've given up on USB and switched to operating Android over Wi-Fi and even mounting the entire Android file system as a Windows drive letter over Wi-Fi using free software.
a. adb
b. scrcpy
c. vysor
d. webdav
Use Windows Event Viewer to check for error messages on the PC.
If the problem is the PC it will likely show up there and give you more troubleshooting clues.
Thread closed at OP's request.
Hey, so here's the story. I connected the cable to my pc and was transferring files to my pc (from find x3 pro).
While I was doing that I opened the bank app to authenticate my login on PC (so the web version of the bank as you to authenticate via fingerprint on mobile, to login) and it said something "hey, I cannot autheticate you, you need to go to 'charge only' on usb". I said "ok fine, I guess it's security" so I waited for file transfer to happen and then clicked that button. I logged in and all good.
HOWEVER, now if I cannot a usb cable the option to choose what to do (charge only, transfer files etc) does not appear anymore! It just charges only: so I cannot transfer anymore files.
I tried also enabling developer options and usb debug and usb mode "transfer files / mtp" but simply nothing happens.
Any help appreciated, thanks