Related
I see WM2k5 1.60c at Buzzdev.net but I can't upgrade because I can't create ".nbf" file. Please help me
Hi, Can you post the link on buzznet as i can't find it??
cheers
Buzz removed the upload. He will post it later on :roll:
Victor
It see it is available on the site!
The dump of 1.60c on Buzz's site is only a dump of files from his device that were used for his testing...
The installer package will be released later on this week / early next week, please be patient...
it'll be worth the wait !
I confirmed it already reposted by buzz. You can download it now. I already upgrade it to 1.60cWWE, but I didn't see any different.
Quite a bit speedier, can't see much else different tho.
Thanks for your time and effort Buzz! We appreciate it.
Hi Buzz,
Thanks Wooooo Hooooo!!!
Everything works fine!!! The speed increase is wonderful!
I have no words to express my gratitude!! You are da man.
I think a lot of people have been spoilt and miss the big picture! Buzz you have done a great job. Just a small comparison to prove this:
Still Broken:
- The buttons (I would love for these to work, its no biggie)
- MMS (Which I have no need for realy)
Fixed huge problems by using WM2005 vs WM2003:
- Bluetooth works like a dream
- Headset reliably works
- Car kit reliably works
- BT GPS reliably works
- Persistant Memory!!!!
- No lockups
- Faster!!!!
- Battery lasts at least twice as long
- We now have WMP 10
- There are several other benefits that the os brings
Respect to the man with the plan.
Regards,
Duan
hi guys
i have dowloaded the update but how do u install it, and do rekkon it will fix the tomtom5 reseting problem
Cheers
Neel
HI all,
intalled 96c but now can't get the extra 32mb storage to appear, unhide then unlock then run Hima_DOC_Tool_1.0.exe, reboot when asked but this cause hard reset and i have no 32nb storage???
can't install voice command, says i have not go enough room?????
currently have
storage 30.53 and program 120.32
any ideas.???????
Also tomtom won't install. Installation just crashes right after agreeing to the licence AAAAHHH??????
I followed Buzz's instructions so can't see what i have done wrong???
Griffy wiffy- any chance you can tell me how u installed it as i dont understand the instructions that come with it
cheers
Neel
Hi Neel, not sure what you are asking. uninstalled what??
Hmmm... I can only see forum on Buzzdev. Where did main page go?
What about the STK (Sim Tool Kit)?
Is it working as well?
I've tried 1.60h.
I worked flawlessly.
However, I have to go back to WM2003SE coz I really need and use this STK feature everyday.
Can someone tell me where can I find the cure for STK to be used in WM5.0, please?
Thanks.
I have a problem downloading WM 5 v 1.60C. Can somebody upload the ROM please!!!! :roll:
tukmol said:
I have a problem downloading WM 5 v 1.60C. Can somebody upload the ROM please!!!! :roll:
Click to expand...
Click to collapse
try this :
http://twosx.net/ppc/WM2k5_1.60c.00WWE_XDA2_HIMALAYA.rar
:wink: :wink:
WM 2005 v1.60C !!
hi all,
after upgrade to wm 2k5 v. 1.60C
y i cant install program to 128mb storage ??
only can install to 31mb storage
thz for ur ansss
hi
after upgrading to 1.60c.00WWE, has anyone lost there Ram disk thing
im totally confused when it comes to Ramdisk, what on earth is it? does it make the memory available on WM5 more? more than the 60 mb we get for storage??
Sorry i know it's a stupid noob question but i really wanted to know
Cheers
Ash
WM6.1_TouchFLO_2D_by_Karandash.rar
WM6.1_TouchFLO_2D_by_Karandash_Nev_Gene_.rar
more info
i don't have any detail on this rom because i don't have avccount on 4pda.ru
if it is wwe then plz create mirror
Unable to get the link from 4pda.ru
where is the link !!!!!!!!
^ You need a 4pda account for downloading that. I'm downloading it currently, will upload it to 4shared when i am done.
@ankit: try to get info about it man, its English or Russian as there is no indication in the filename itself. Try to get some info yaar, i am also trying. If you dont find out, i'll try to find it by dismantaling the ROM by tools given in GENE Kitchen.
I SINCERLY HOPE THAT WINDOWS LIVE WORK IN THIS ONE ATLEAST! Sorry for the all caps :|
And people please try it out as much as you can and give feedback.
Goog Luck!!!
swapnil_0081 said:
Unable to get the link from 4pda.ru
where is the link !!!!!!!!
Click to expand...
Click to collapse
the first should be on site to do the Registration.
And download this files in forum!!!
http://4pda.ru/forum/dl/post/155855/WM6.1_TouchFLO_2D_by_Karandash.rar
http://4pda.ru/forum/dl/post/155863/WM6.1_TouchFLO_2D_by_Karandash_Nev_Gene_.rar
Informations:
Storage Memory: 45
In new Gene's Storage Memory: 43~42
Code:
1. 2D_Audio_Booster
2. Office(Word, Excel,..)
3. Game: Zuma
4. New HTCAlbum
5. AlReader
6. AltTab
7. Arcsoft_MMS_5_0_31_7_ENG_RUS
8. BT Explorer
9. BTSwitch
10. gene_extromunhide
11. hc4_inbox
12. HTC Diamond Ring Sounds
13. HTC Opal ComManager
14. JBed Java
15. HTC_LargeStartMenu_TitleBar
16. m2d V21(Gene)
17. Missedcaiis
18. MyDiamondDialer
19. opal_rington
20. Opal_Audio_Manager
21. ppcpimbackup
22. Radiooff
23. Sisteminfo
24. SwitchRotation
25. Total Commander
26. Vibra
27. VolumeControl
28. WkTaskL_1200
29. WM5torage_18
Hey can anybody confirm the status of windows live on this ROM? Or is it not there?
That will be the best thing coz then i hope one of the cabs from this forum will work on it or atleast the official cab without the messenger will run atleast.
That ways we can have hotmail access and can use IM+ or Mundu IM for MSN messenger.
Anyways, heres the alternative link on 4 shared:
[Mirror Deleted as the ROM was russian and no longer needed]
UPDATE: A quick inspection of the dump of this ROM reveals that Windows Live is not there Somebody please try this ROM and install and test Windows Live on it. I have just installed my current ROM yesterday so dont want to mess up my phone right now for testing purpose :|
Also Some of the files are in Russian!! :| why so?
@Ankit360: buddy i guess you would like to try it out, you haven't used any rom other than fusion i think just asking, no offence.
krazy_about_technology said:
Hey can anybody confirm the status of windows live on this ROM? Or is it not there?
That will be the best thing coz then i hope one of the cabs from this forum will work on it or atleast the official cab without the messenger will run atleast.
That ways we can have hotmail access and can use IM+ or Mundu IM for MSN messenger.
Anyways, heres the alternative link on 4 shared:
http://www.4shared.com/file/76994078/dc08044d/WM61_TouchFLO_2D_by_Karandash_Nev_Gene_.html
UPDATE: A quick inspection of the dump of this ROM reveals that Windows Live is not there Somebody please try this ROM and install and test Windows Live on it. I have just installed my current ROM yesterday so dont want to mess up my phone right now for testing purpose :|
Also Some of the files are in Russian!! :| why so?
@Ankit360: buddy i guess you would like to try it out, you haven't used any rom other than fusion i think just asking, no offence.
Click to expand...
Click to collapse
can you provide the mirror of the second file for old p3400 above for this rom?
HI Friends i tried this rom today this rom is looking good but the fact is that this is Russian!!! version
bad Luck
I m waiting for new wm6.1 rom
OOPS! my suspicion was correct. But the help files in the ROM are in english, remaining part is Russian i guess, i mean the UI elements.
@rakesh_4utoo: Buddy, still want a mirror ;-)
krazy_about_technology said:
OOPS! my suspicion was correct. But the help files in the ROM are in english, remaining part is Russian i guess, i mean the UI elements.
@rakesh_4utoo: Buddy, still want a mirror ;-)
Click to expand...
Click to collapse
NO Thanks for a quick reply
Can we convert this rom to english ?????
Are yaar first we need the english version of kitchen then only we can covert or create anything. No body has shared it yet with us, dont know why. Why everybody wants the kitchen to be secret :|
Since this ROM isn't useful as it is, i am deleting the mirror :|
PS: If anybody wants the Zuma game included in this ROM or the HTC Diamond Ringtones, i have extracted those, tell me and i'll upload.
Closed as per OP Request.
Dave
Hello xda,
This is my first public ROM (ONLY FOR NEW GENE), which I have been using for last few days without any issues. This ROM has been possible for two great persons of the Gene forum Sumit Bharadwaj aka krazy_about_technology and ramersonw. They have practically lead me by hand in cooking the ROM.
Thank you ramersonw for the GREAT Tutorial.[COLOR]
Thank you Sumit, for publishing your ROMs without protection , so that less mortals like us can use your ROMs as base to cook our own ROMs. As a matter of fact this ROM is based on Sumit’s latest Pro User 2 r 1 ROM. So if you like this ROM, the entire credit goes to Sumit. However if there is some problem, then sorry – I must have deleted something I shouldn’t have. Also please keep the Carrier splash screen, its my way to thank these two wonderful persons. I have deleted a lot of applications which I believe most people do not use, the list of packages that are not there:
1. Cyberon Voice Commander.
2. Voice Recorder.
3. Arcsoft MMS (MMS is pretty expensive, so I am not sure how many pple use it)
4. Windows TaskManager (WK Task is there)
5. Opal Phone Canvas.
6. Connection Setup.
7. Adobe Reader
8. Flash Player
Additional Applications in the ROM:
1. TCPM Player 0.72RC1
2. Dr. Gonzo’s Clean Fonts Cab (Modified), Thank a million Dr. G for getting me hooked to xda.
3. PointUI 2.0
This is my first ROM, so it may have some bugs which I have missed out. So please report the same. I will try to sort them out in the next release.
I am not posting screen shots as they are same as Sumit’s Pro User’s ROM.
Thanks again ramersonw and Sumit, you are the people with the greatest heart in this community (atleast to me ).
Vital Statistics:
Free Storage: 57.5 MB approx
Available RAM: >= 22 MB
If you have the guts to flash your device , please give feedback.
Thanks
Download instructions:
visit http://www.4shared.com/dir/13501030/be68af87/PointUI2.html
and download all the four files. Copy them in a folder and use Winrar to open the first file and extract it.
Great going Shaunak, Kudos to you! I may not download and use it right now, but i am curious about feedback and i'll try to support the rom by answering people's questions here, if thats ok with you BTW, can you send me the clear fonts cab and the carrier splash you are using, i want to see these but i am on mobile internet connection right now so i cannot download big stuff, comfortably. Will be returning to Delhi by 16th morning so would be glad if i get these before that.
krazy_about_technology said:
Great going Shaunak, Kudos to you! I may not download and use it right now, but i am curious about feedback and i'll try to support the rom by answering people's questions here, if thats ok with you BTW, can you send me the clear fonts cab and the carrier splash you are using, i want to see these but i am on mobile internet connection right now so i cannot download big stuff, comfortably. Will be returning to Delhi by 16th morning so would be glad if i get these before that.
Click to expand...
Click to collapse
Sure I will love it. Because technologically your are much more capable than me . I am mailing you the files, the carrier splash is the welcomehead png file btw.
Oh, ok. I thought its the first HTC logo that shows the onbl spl etc. Anyways, since i cant download the rom for now, i would appreciate if you can send me the png also. BTW Thanks for the cab.
give it for old gene also
hey dude
great work man but u need to give it for old gene also man
how do i test it or give u a feedback if i cant use it very very
Addicted2xda said:
Sure I will love it. Because technologically your are much more capable than me . I am mailing you the files, the carrier splash is the welcomehead png file btw.
Click to expand...
Click to collapse
svrhari said:
hey dude
great work man but u need to give it for old gene also man
how do i test it or give u a feedback if i cant use it very very
Click to expand...
Click to collapse
I do not know how to port it to old Gene .
@krazy: can you help me out ?
oh yes i will,but with old gene its complicated as all ofus know.i had to make two different roms previosly to solve the battery drain problem,and i am still not very sure whats the exact cause this. I guess first some new gene users should test it and then we can continue our efforts for old gene.
@Addicted2xda: i m the 1st to download ur rom
regards
Nipun
nipun_cse said:
@Addicted2xda: i m the 1st to download ur rom
regards
Nipun
Click to expand...
Click to collapse
Thanks buddy, please provide feedback. but don't be too demanding since its my first public ROM .
@krazy & addicted
hi
thanks to both of u ill wait till u make the same for old gene
but hey dont take toooo long thanks guys
krazy_about_technology said:
oh yes i will,but with old gene its complicated as all ofus know.i had to make two different roms previosly to solve the battery drain problem,and i am still not very sure whats the exact cause this. I guess first some new gene users should test it and then we can continue our efforts for old gene.
Click to expand...
Click to collapse
@Krazy : Please port the lite rom for OLD GENE. Also PointUI may be stripped from the current ROM ( I don't think it is really needed in stripped down version).
techmate said:
@Krazy : Please port the lite rom for OLD GENE. Also PointUI may be stripped from the current ROM ( I don't think it is really needed in stripped down version).
Click to expand...
Click to collapse
I don't think Sumit will himself port it to old Gene, the best he can do is help me porting it.
BTW Lite ROM doesn't mean a Gene just for making calls . Otherwise I wouldn't have included TCPMP either .
To me Lite means stuffs that are not usually required.
me downloading the ROM....
Thanks a ton to all the chefs who r cooking ROM for general people
@addictedtoxda Congratulations for ur first ROM...hope u will make more gud ROM...eager to check it out
@addicted2xda: Yes, please port it with the help of Krazy for OLD Gene. BTW you are absolutely right in stating the stripped down/lite version is just not a dumb mobileOS. I agree you have stripped the softwares/utilities which we do not usually require and retained the important and useful softwares. Just a suggestion PointUI may also be made optional.
Addicted2xda said:
I don't think Sumit will himself port it to old Gene, the best he can do is help me porting it.
BTW Lite ROM doesn't mean a Gene just for making calls . Otherwise I wouldn't have included TCPMP either .
To me Lite means stuffs that are not usually required.
Click to expand...
Click to collapse
I would really wish to try this lite version.
@Addicted2xda: I am using this rom last 1 hour.
This rom is faster the sumit's rom (my Personal Opinion)
U can Add Acrobat,
song stop when Suspend ( think U can add reg edit with this rom by default)
why not add ur Black theme?
still I not find any bug....
anyway connection sating is necessary soft for all. Please add it,
I appreciate ur ROM building.
regurds
Nipun
Addicted2xda said:
Thanks buddy, please provide feedback. but don't be too demanding since its my first public ROM .
Click to expand...
Click to collapse
Over all the Windows r fine
Memory usage-
( Storage )
Total:64.82mb
used:7.49mb
free:57.34mb
( program )
Total:49.22mb
In use:22.09mb
Free:27.13mb
And i love the Cursor
so far no bug found..
Some1 plz help me in foll. things:
1.i hav ringtone in storage card.when i tap on *set as ringtone*this foll. error cm **There was an error coping ringtone to My documents/My Ringtones.the ring tone could not be set.Please verify you hav enough room on ur device and try again.**
i need to paste the ringtone in windows folder then it works fine...
2.Some please tel me how to change Alarm tone.i hav many tones in .mp3 format i want to set them.
Some please help me out.will be thankfull to tat person
Although which apps are useful and which are useless is a subjective thing and depends from person to person, My personal view is that a lite ROM should contain utilities that doesn't cripples the original funtionality of ROM.
The highly unused parts should be removed, the parts that can be updated should either be updated or if they are frequently updated one, should be provided as recommended downloads and those software that can be easily installed on the storage card should be avoided to be included on ROM (but make sure they are not the one which just show that they are installing on mem card but have hardcoded paths.). Today plugins and dialer are the most important candidates to be included in ROM as they have to be installed on phone mem anyway. .NET framework and others should also be included. Flash plugin is controvertial, it works with some apps, but doesn't works with others.
Plus, initflashfiles.txt should also be checked for unnecessary file copy installations like i was having problem with Audio Manager in previous ROMS.
So as far as this ROM is concerned, i think shaunak should not have included TCPMP and PointUI2 is something that is currently under heavy development so it is up to him to include it or not, as including it provides improved speed of point ui, but it hampers updating of it.
krazy_about_technology said:
....... i think shaunak should not have included TCPMP and PointUI2 .......
Click to expand...
Click to collapse
Yeah, you are absolutely right. But we are so fond of flashing our devices (well most of us, as you can see from frequently changing signatures ), I think by the time TCPMP will be updated, all us would have already migrated to a new ROM .
@amolji & nipu_cse thanks for you encouraging words. Actually my ROM may appear faster than Sumit's is because a lot of stuff has been removed from his ROM. But then its a personal opinion. Like I have seen some pple who believe WM 6.5 with honeycomb menu has a faster response than Pro User 2 r1 . I couldn't handle its slowness for 1 hour even and immediately reflashed. Eye candy is good, but not that good . I will definitely keep your suggestions in mind. BTW I tried to integrate the black theme (its not mine, its of P1Tater - one of the Mods, so I wouldn't even dream to call it mine), but did not work .
@krazy: I hope you don't have any issues with the welcomehead file, its just my way of showing gratitude to you two guys
No man, i was a bit overwhelmed in the way you have written my name everywhere, highlighted Thanks. The file is ok and your doing a great job. Very nice
Hello!
I have just make a simple Remote controll app for lg p500
This allow you to Remote controll your LG P500 from Windows over USB
so if someone want to try it or use it be my gest
Hope i can become usefull for someone
--------------------------------------------------------------------------------------------------
Verson 1.1
Manual installation
No shortcut
Have LG P500 usb driver
Verson 1.2
Automatic installation
Creates shortcut on dekstop
Uses driver from verson 1.1
Fixex "record future" Makes .mov file
Verson 1.3
Fixed smal installation thing
Fixed installation Directory
Removed .bat shortcut`s
i recomend to update to verson 1.3
---------------------------------------------------------------------------------------------------
Please give me feed about what you think about it : )
im also going to make a verson for mac os x if posibile and a verson that work With any andorid phone : )
Best Regards
OPJ
Smal fix
Putting up new download file v.1.1 for fix for smal problem. juse this new verson for getting it working.
Works very well (O1, Miks 6.5.7)
One thing I found: When clicking "Record" but then canceling the file selection window, the record button stays pressed. When clicking it again, you get a java.lang.NullPointerException
I can PM you the whole error, but I guess it's pretty easy to reproduce.
Wowwwww great program.Although lags and gives less fps,but a very good start.Am impressed.
seems to be an interesting 1
vansens: hmm, strange.. it is working fine on 5 computers for me.
What is Your java verson?
Are you running Windows xp/Windows 7?
To All :
Tanks for the feedback
---
OPJ
Update to 1.2
The program is now updated to verson 1.2
Read the first thread for info and download
---
OPJ
It's working great for me! Nice job!!
I'm wondering if u can add a function that will either turn the screen orientation based on the accelerometer or by adding a button that will change it?
spellspark said:
It's working great for me! Nice job!!
I'm wondering if u can add a function that will either turn the screen orientation based on the accelerometer or by adding a button that will change it?
Click to expand...
Click to collapse
hi,
dosent Your screen turn ? mine dos :S but if you right click in the Remote session the Picture shuld tur : )
it is verson 1.2 you have tried?
was the installation going well?
---
OPJ
olepj1992 said:
hi,
dosent Your screen turn ? mine dos :S but if you right click in the Remote session the Picture shuld tur : )
it is verson 1.2 you have tried?
was the installation going well?
---
OPJ
Click to expand...
Click to collapse
You didn't provide any readme/help file in the zip ( ), so I didn't know about right clicking... It works Video recording works
This could be very useful for someone who makes an app and wants to show it off on YT or some other video hosting provider... or make tutorials on how to use/flash sth
spellspark said:
You didn't provide any readme/help file in the zip ( ), so I didn't know about right clicking... It works Video recording works
This could be very useful for someone who makes an app and wants to show it off on YT or some other video hosting provider...
Click to expand...
Click to collapse
Good : ) sorry, im going to make a readmr/help file to Morrow : )
thanks gor trying it out : )
im happy for tips to get it smuuder : )
Found a bug?? Not sure... I get a popup with an "ArrayIndexOutOfBoundsException: Coordinate out of bounds!" error when I right click when in portrait/landscape position to change the orientation... What I mean is I get the error when I don't turn the phone to another position (I stay on the original one) and then right click... Also, the remote client freezes on the last frame before the error (it keeps displaying the last frame after closing the error window). The weird part is u can still control the phone by clicking inside the client...
Full string of the error:
java.lang.ArrayIndexOutOfBoundsException: Coordinate out of bounds!
at sun.awt.image.IntegerInterleavedRaster.setDataElements(Unknown Source)
at java.awt.image.BufferedImage.setRGB(Unknown Source)
at net.srcz.android.screencast.api.injector.ScreenCaptureThread.display(ScreenCaptureThread.java:145)
at net.srcz.android.screencast.api.injector.ScreenCaptureThread.fetchImage(ScreenCaptureThread.java:106)
at net.srcz.android.screencast.api.injector.ScreenCaptureThread.run(ScreenCaptureThread.java:51)
Click to expand...
Click to collapse
spellspark said:
You didn't provide any readme/help file in the zip ( ), so I didn't know about right clicking... It works Video recording works
This could be very useful for someone who makes an app and wants to show it off on YT or some other video hosting provider... or make tutorials on how to use/flash sth
Click to expand...
Click to collapse
Yepp good thinking : )
i did make it do use for making video torurials on our andorid Devices were i work, and i think many other users can use it too : )
i will try yo get rid of the lagg but i do think it laggs becouse the Communication is over usb
tnx for all good feedback, its make my day
spellspark said:
Found a bug?? Not sure... I get a popup with an "ArrayIndexOutOfBoundsException: Coordinate out of bounds!" error when I right click when in portrait/landscape position to change the orientation... What I mean is I get the error when I don't turn the phone to another position (I stay on the original one) and then right click... Also, the remote client freezes on the last frame before the error (it keeps displaying the last frame after closing the error window). The weird part is u can still control the phone by clicking inside the client...
Full string of the error:
Click to expand...
Click to collapse
hmm strange, im going to try to reproduce the error tomorrow and try to fix it
tnx for the report
Update v 1.3
Se the first post for info and download : )
Mac version is maybe ready to morrow .
What do you want?
Hi,
Do you want more out off this software?
or are the enything you want different?
do you think this software is usefull?
if so please contact me,
And please give me feedback.
Best Reguards
OPJ
This software`s maker : )
http://forum.xda-developers.com/tags.php?tag=mpe
does a similar thing. it's great to get off the screen-keyboard, back to the real thing ...
this is a copy of screencast, isn't it?
Greets!
Delete post
Any way to change installation folder? There is no 'Change...' button as of now and the folder path is greyed out.
Hi all,
sorry because my english is very bad
I looking for file (system?) manage audio during phonecall .
can you help me ?
because my problem it's my corresponding hear his voice when the phone is connected to my car stereo
and I have two ROM with and without this problème, I can post the file systeme, but I just find audio_effects.conf but I havn't experience with that...
does anyone have an idea ?
I can post different folder "system" to compare and understand for me please ?
Thank You for some Help