Related
hi
can antbody help half way through a rom upgrade i lost all power and now my xda 2 is stuck on the o2 screen and doe not come to live which means it will not connect to active synic so i can complete the upgrade! can anyone please help?
thanks
PJ
pjscooby372 said:
hi
can antbody help half way through a rom upgrade i lost all power and now my xda 2 is stuck on the o2 screen and doe not come to live which means it will not connect to active synic so i can complete the upgrade! can anyone please help?
thanks
PJ
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/viewtopic.php?t=13651&highlight=
I killed my XDAII also halfway upgrading ... but managed to restore it back ... good luck .... and lastly .. don't give up
thanks everyone got it to work
hi i meda a big problem on my Athena x7500 iam not CID opend it is loukt and i have run'd the tool to go to spl 3.5 and didnt flsh it i rest my Athena and it stopt runing i a get to boot lood it gives me spl 1.10 .0000
and it will not flsh any thing what shud i do if this is the problem is thare any beck up of the originel HTC room i mine the 1 that comes with my PDA like WM 6.0 so i can come beck to live and do the flsh agin of WM 6.1
with the CID opend ?
lidan25 said:
hi i meda a big problem on my Athena x7500 iam not CID opend it is loukt and i have run'd the tool to go to spl 3.5 and didnt flsh it i rest my Athena and it stopt runing i a get to boot lood it gives me spl 1.10 .0000
and it will not flsh any thing what shud i do if this is the problem is thare any beck up of the originel HTC room i mine the 1 that comes with my PDA like WM 6.0 so i can come beck to live and do the flsh agin of WM 6.1
with the CID opend ?
Click to expand...
Click to collapse
Dude!!!
Did you not read anything anyone has told you??? Read the F***ing Instructions PLEASE!! Its Simple. You still have bootloader so flash with AP 3.0 and start again. If you dont know what you are doing then stop messing until you do.
responderman said:
Dude!!!
Did you not read anything anyone has told you??? Read the F***ing Instructions PLEASE!! Its Simple. You still have bootloader so flash with AP 3.0 and start again. If you dont know what you are doing then stop messing until you do.
Click to expand...
Click to collapse
sand me a link for AP 3.0
thanks
agin
it didnt work it Flsh like 1% and Rest !!
on Ap 3
lidan25 said:
it didnt work it Flsh like 1% and Rest !!
on Ap 3
Click to expand...
Click to collapse
thats because u did not hard spl your device. u need at least 1.2 olipro as your version for spl before loading any rom
irus said:
thats because u did not hard spl your device. u need at least 1.2 olipro as your version for spl before loading any rom
Click to expand...
Click to collapse
so is there any way to get out of this problem? help me if you can thanks
how do i get 1.2 olipro ??
how do i hard spl my device ?
if i can only get to boot lood ?
flash back to your original ROM first.
Then unlock to spl1.2.
Then flash to AP 3.
eaglesteve said:
flash back to your original ROM first.
Then unlock to spl1.2.
Then flash to AP 3.
Click to expand...
Click to collapse
is there any way i can know what i had i had i only know it was Htc ROM WM 6.0
any way to get this Rom ?
lidan25 said:
is there any way i can know what i had i had i only know it was Htc ROM WM 6.0
any way to get this Rom ?
Click to expand...
Click to collapse
I usually download from htc club site. You need to be registered first.
If not, get it from the upgrade thread if you know which variant you're using. There are many version of stock ROM and you must use the correct one.
eaglesteve said:
I usually download from htc club site. You need to be registered first.
If not, get it from the upgrade thread if you know which variant you're using. There are many version of stock ROM and you must use the correct one.
Click to expand...
Click to collapse
can you sand me a link so i can get any and test 1 at atime so if it will work i will get it beck working !!
can you?
lidan25 said:
can you sand me a link so i can get any and test 1 at atime so if it will work i will get it beck working !!
can you?
Click to expand...
Click to collapse
I answered you in another Thread , you really should not be cross posting.
Here is the link but read my other answer
http://wiki.xda-developers.com/index.php?pagename=Athena_Upgrades
thanks
lakeman said:
I answered you in another Thread , you really should not be cross posting.
Here is the link but read my other answer
http://wiki.xda-developers.com/index.php?pagename=Athena_Upgrades
Click to expand...
Click to collapse
thanks man
wall i hope this helps
ok it did work thanks for all of you hare i think i will be ok for now !!
irus said:
thats because u did not hard spl your device. u need at least 1.2 olipro as your version for spl before loading any rom
Click to expand...
Click to collapse
Irus,
Ive been telling this guy on another thread to read up on all this before jumping in but he went and did it anyway. you cant help them that wont help themselves. he is trying to use SPL 3.5 on his athema so I gave him the link to AP 4.0 and told him to read up on everything first!
regards
Jay
responderman said:
Irus,
Ive been telling this guy on another thread to read up on all this before jumping in but he went and did it anyway. you cant help them that wont help themselves. he is trying to use SPL 3.5 on his athema so I gave him the link to AP 4.0 and told him to read up on everything first!
regards
Jay
Click to expand...
Click to collapse
hi thare the only problem i have is the wifi on AP 4.0
so now it is not a big thing now what do i need to do ??
responderman
i know you dont like me but now all is ok the wifi is not !!
The messing with the wrong SPL and Bootloader has killed your WiFi.
If you have a note of your WiFi's original MAC address, then one of the developers may be able to help you. You can only hope one of them is watching this thread
lidan25 you are annoying people
lidan25 said:
hi thare the only problem i have is the wifi on AP 4.0
so now it is not a big thing now what do i need to do ??
responderman
i know you dont like me but now all is ok the wifi is not !!
Click to expand...
Click to collapse
lidan25 you are annoying people who have given you good advice.
read the wiki http://forum.xda-developers.com/newreply.php?do=newreply&p=2238472
especially this part http://wiki.xda-developers.com/index.php?pagename=HTC_Athena_AP4_FAQ
which talks about your problem
go away and learn about the problems you have created by not taking the good advice already given
lidan25 said:
hi thare the only problem i have is the wifi on AP 4.0
so now it is not a big thing now what do i need to do ??
responderman
i know you dont like me but now all is ok the wifi is not !!
Click to expand...
Click to collapse
The only thing i'm pissed about is I was telling you from the very start to read up first so you dont screw up your device. the instructions are crystal clear and if you follow them all would be well now. you have done what people were trying to tell you not to. However if you READ the WM6 pages there is a post telling you how to get WiFi back, its quite easy but you need other help. you may as well put the rom you want on first and then set up WiFi again. Its nothing to do with not liking you!!
responderman said:
The only thing i'm pissed about is I was telling you from the very start to read up first so you dont screw up your device. the instructions are crystal clear and if you follow them all would be well now. you have done what people were trying to tell you not to. However if you READ the WM6 pages there is a post telling you how to get WiFi back, its quite easy but you need other help. you may as well put the rom you want on first and then set up WiFi again. Its nothing to do with not liking you!!
Click to expand...
Click to collapse
ok i am sorry but now i am reding all the things i need to do bay using the Mac1EXE
and the matty.EXE
but the MAC address i dont have so from what can i get it ?? so i can tape it on the tool i have got form the link !! you give me !!
i know thare is some info on this link but not how to find mac add !! of my PDA For Wifi !!!the
http://wiki.xda-developers.com/index...Athena_AP4_FAQ
I have a stock Leo 1024 with spl 2.10 can i just hook up my phone using the windows mobile center and run the the CustomRUU.exe. Or do i need to flash my phone to hspl 1.42 in order for the flash to be successful. I have read the topics and honestly i am still confused. I guess cause i am reading alot of scenarios which in the end makes me more confused than when i first started reading. Cause i was reading in one thread that i dont need to flash to another hspl if i wanna keep my waranty and stuff like that. any help is greatly apprecieated
use hspl3 - choose 2.08.hspl
thanx...much appreciated. i just used hspl3 and it worked like a charm. do u know what radio works best for miri & dinik rom or is it pretty much based on your own personal phone?
frequency1 said:
or is it pretty much based on your own personal phone?
Click to expand...
Click to collapse
yep, the rom thread will recommend which radio to use, but its personal preference.
Please Help
Hi
This Is My First Post, i Was Just Wondering, I've Already Installed a custom Rom On My Hd2, But i Want To Install Another One.
Ive tried It And Enerytime It gets Stuck On The Installation page At 0%
Any Advice or Help Would Definitely Be Appreciated
Btw Its HD2 Uk
Thanks
Nukklez said:
Hi
This Is My First Post, i Was Just Wondering, I've Already Installed a custom Rom On My Hd2, But i Want To Install Another One.
Ive tried It And Enerytime It gets Stuck On The Installation page At 0%
Any Advice or Help Would Definitely Be Appreciated
Btw Its HD2 Uk
Thanks
Click to expand...
Click to collapse
first dont hijack peoples threads but hey ho lol
presuming you have a version of hspl on youre hd2, try taskk 29 or mtty before you flash should help, are you going through usb or sd card?
thank u very much for the help. at first i was kinda scared to exploit my phone...lol but now i have changed to a different rom 2 times without any worries .
Hi folks! I just wanted to know if there is a way to flash my stock rom to the device. I am running the Dynamic custom rom by ultrashot and mye phone crashes etc., therefore I want to flash my phone back to the original firmware, radio and so.
Can somebody help me? Make a guide?
Hope for a positive answer
Cheers,
Tabbii
http://forum.xda-developers.com/showthread.php?t=1334468
Lots of useful stuff on ere if you look for it.
" Today 06:36 PM
AndyFZ1S http://forum.xda-developers.com/show....php?t=1334468
Lots of useful stuff on ere if you look for it. "
I know mate =) It is just that I don't understand a thing. I have been searching and searching for ages, but I can't seem to find a guide/way. Tried out many different things. It would be alot easier if somebody who knew about flashing stock rom would post a thread/guide =)
Cheers,
Tabbii
Its very simple - download original ROM, connect phone to PC and flash it, i dont understand whats the problem on it...
Maybe you should tell us a bit more about ur phone- att vs euro version, if its att did u debrand to euro version or flashed to dft spl2.05 straight away, what methods have u tried that didn't work?
Sent from my Titan Dynamic7 v1.21 using XDA Windows Phone 7 App
Petulinek said:
Its very simple - download original ROM, connect phone to PC and flash it, i dont understand whats the problem on it...
Click to expand...
Click to collapse
Okay bud, let's say that you make a guide for me. Find the original stock rom for me, tell me how to flash and problem resolved. You in?
Tabbii said:
Okay bud, let's say that you make a guide for me. Find the original stock rom for me, tell me how to flash and problem resolved. You in?
Click to expand...
Click to collapse
Good joke man
Everything you need is in this thread: http://forum.xda-developers.com/showthread.php?t=1334468
Pls next time use Search before posting.
but what does "RUU" stand for?
Not that easy...
Petulinek said:
Good joke man
Everything you need is in this thread: http://forum.xda-developers.com/showthread.php?t=1334468
Pls next time use Search before posting.
Click to expand...
Click to collapse
Believe me, buddy, I searched alot before posting this. I just can't seem to find a way to install the stock OSPL back again. Now I am running HSPL by DFT. I want to install the old OSPL again so that I can have the stock rom(original). I have searched everywhere, but there is no post regarding the stock OSPL. Yes, the program for installing HSPL by DFT has this choice where u can choose downloading the HSPL or the OSPL. I have tried many times to install the OSPL, but I get an error. Besides, I don't know the right structure of this whole process; Am I going to install the stock radio first or install the OSPL first? And what about the Stock Rom, when do I flash That?
RUU stands for RomUpdateUtility =)
hello bud,
pay no attention to the "know it alls" who post just to post, without actually answering your question. Thats what the forums are for, developement and questions no?
But as an attempt to be helpful, what type of device do you have?
Have you tried just flashing the stock rom found on Football's rom thread?
If not try that using a "RUU" because from what DFT's HSPL page says you should overwrite their hspl if you reflash the original Rom for your device.
IronMan1289 said:
hello bud,
pay no attention to the "know it alls" who post just to post, without actually answering your question. Thats what the forums are for, developement and questions no?
But as an attempt to be helpful, what type of device do you have?
Have you tried just flashing the stock rom found on Football's rom thread?
If not try that using a "RUU" because from what DFT's HSPL page says you should overwrite their hspl if you reflash the original Rom for your device.
Click to expand...
Click to collapse
I have an HTC TITAN(EURO VERSION I THINK). I do have installed ultrashot's rom(dynamic's.......) i don't know what to flash first. What AM I flashing first?
where do i get that RUU? and what AM i overwriting with? I AM getting so confused :-\
You just look in the development thread and download any RUU, like ansar's for example. Then download the stock "euro" rom from football's filefactory. Then you simply put the rom In the same folder as the ruu, run it and follo the instructions! Good luck.
Iron Man
Sent from my PI39100 using XDA Windows Phone 7 App
IronMan1289 said:
You just look in the development thread and download any RUU, like ansar's for example. Then download the stock "euro" rom from football's filefactory. Then you simply put the rom In the same folder as the ruu, run it and follo the instructions! Good luck.
Iron Man
Sent from my PI39100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
could anyone give a tutorial for this¿?
doubler.es said:
could anyone give a tutorial for this¿?
Click to expand...
Click to collapse
What exactly are you trying to do?
Dear All,
This RUU for HTC Titan II (Radiant)
http://www.ziddu.com/downloadlink/20051983/RUU.Radiant.part1.rar
http://www.ziddu.com/downloadlink/20051984/RUU.Radiant.part2.rar
http://www.ziddu.com/downloadlink/20052100/RUU.Radiant.part3.rar
http://www.ziddu.com/downloadlink/20052192/RUU.Radiant.part4.rar
Bless to me .
What version is the O.S.? Which carrier is this branded to or is it unbranded?
Dan
The filename is:
RUU_Radiant_Cingular_US_1.18.502.01_Radio_8k_2180_20120120_Signed_RELEASE
I have just downloaded it, will upload to another host.
MIRROR ADDED:
Code:
https://rapidshare.com/files/3181749973/RUU_Radiant_Cingular_US_1.18.502.01_Radio_8k_2180_20120120_Signed_RELEASE.rar
In order to install Stock ROM to your AT&T Tiatan II, you have to enter bootloader mode:
1. Turn off your device
2. Turn on your device, when you see the white screen press POWER + VOL UP + VOL DOWN
3. In the middle of the screen it says "SERIAL"
4. Connect your Titan II via usb to your pc (Zune should NOT be running)
5. Wait until in the middle of the screen of the phone says "USB"
6. Run the RUU file and wait until the ROM is fully installed.
THIS WILL WIPE ALL YOUR DATA!
OK, excuse the dumb question... how do I tell if this is useful to me? I know I can look on my "About" page for version numbers - but which ones does this refer to? None of the ones listed seem to match the format of the ROM file name.
Is this a Radio update, which is implied by the name, or a ROM update, which is implied by the directions?
Thanks in advance,
AJ
P.S. clearly, i need to update my .sig
bitbrat said:
OK, excuse the dumb question... how do I tell if this is useful to me? I know I can look on my "About" page for version numbers - but which ones does this refer to? None of the ones listed seem to match the format of the ROM file name.
Is this a Radio update, which is implied by the name, or a ROM update, which is implied by the directions?
Thanks in advance,
AJ
P.S. clearly, i need to update my .sig
Click to expand...
Click to collapse
RUU_Radiant_Cingular_US_1.18.502.01_Radio_8k_2180_ 20120120_Signed_RELEASE
RUU_[Model]_[Carrier]_[Country]_[SPL Version]_Radio_[Radio Verison]_Signed_Release
the Radio version seems weird and 20120120 is a date
sunhi3man said:
What version is the O.S.? Which carrier is this branded to or is it unbranded?
Dan
Click to expand...
Click to collapse
O.S. is 7.10.8112 and this ROM is branded for AT&T Wireless.
OMG no one said thanks or Clicked on the word THANKS
Really frustrated.
medo18 said:
OMG no one said thanks or Clicked on the word THANKS
Really frustrated.
Click to expand...
Click to collapse
That^ is not what you do if you want someone to thank you.
I'll provide you a thanks because of providing content to the community, but next time, curb your frustrations please.
We need awareness, not only a word of thanks.
Thank you
medo18 said:
We need awareness, not only a word of thanks.
Thank you
Click to expand...
Click to collapse
Dude many thanks for the windows, if you ever find a unlock window for titan 2 or how to unlocked would be much appreciate it.
hi.
this metod work in titan ii at&t???
not is necesary hspl????
thanks
09caeza32 said:
hi.
this metod work in titan ii at&t???
not is necesary hspl????
thanks
Click to expand...
Click to collapse
Yes its .
Thanks, but this rom have language spanish????
Thanks again
Sent from my X8 using xda app-developers app
09caeza32 said:
Thanks, but this rom have language spanish????
Thanks again
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
No, only 0409.
Possible install CABs thence.
New here, what is this update for? Stock? huh?
Planning on getting T2 also but wanting to wait for WP8.
OK, well now I come to look again, the filename makes more sense. Yeah, that is a weird Radio version - but it's an earlier SPL than I have on my device - the ROM dates from January 20th this year....
If anyone wants to educate me about how to rip a ROM off a phone (IDK if that's even possible) I would be happy to try...
OK, so someone downloads this RUU, reverse engineers it and mods the bits...I appreciate this is a very basic way of looking at it.
Someone do me a favor and point me at some details about why you need an HSPL to load a custom ROM? I assume it's so you don't have to go the trouble of certifying/signing the ROM image so the SPL will accept it?
I should be talking to DFT ....
I'm gonna do some digging of my own and see where it gets me. I used to do this stuff for a living a while back....
hello,
I tried flashing this ROM on my Titan 2 but it resulted with Error 266 at 16% saying "flash write error happened please check your pda phone "
anyone please help me
.
Downloading...
Thanks so much to OP!
gnvkittu said:
hello,
I tried flashing this ROM on my Titan 2 but it resulted with Error 266 at 16% saying "flash write error happened please check your pda phone "
anyone please help me
Click to expand...
Click to collapse
I got the same issue, I get stuck at 16% and get error 262 update error. Now won't boot and only go back to the serial USB screen. Please help? I tried a different cable, different computer, different OS, tried on windows 7 and xp.