Related
Hi there,
I know, there is also a special thread regarding this issue, but my question is more general:
I want to upgrade the (write protected) Ext ROM of my XDA. As I do not have an upgrade tool from o2, I've downloaded the latest upgrade from T-Mobile Germany and followed Softworkz's instructions and made my own Extended ROM.
But now I am not sure, if it will be possible to flash my XDAII with the MDAII flash utility (will be flashing the ExtRom with o2 Files only). Do I need the original o2-Sofware to flash or can I take any HTCHimalaya-Software to flash my device?
Thanks for comments...
Bobopopo
Hi Bobopopo!
As stated here: http://forum.xda-developers.com/viewtopic.php?t=6289 it's quite easy. You'll find a step-by-step How-To (in GERMAN!) here:
http://www.smartphone4u.de/xda2/tipps_tricks/extended_rom.html
And it works like a breeze! The only thing is that I don't know, whether your O2 xdaII will accept the T-Mobile ROM - but I don't see any reason why it shouldn't.
Only issue could be the Radio Stack Upgrade, but I have no problems at all with the T-Mobile Radio Stack in the O2 network.
Also I don't know of a way to backup your original ROM of the xda II - but maybe theres still the bootmanager way to back it up to an SD-Card!
Grüsse,
Klaas.
Finally flashed the ROM of my German XDAII with a German T-Mobile ROM (1.60). Has been no problem at all and I am impressed how easy it was (using ER2003edit). The only thing I have to work on is the homezone control, it is not working yet but not so important anyway.
I cooked my own ExtROM, but I think it will need some more improvement.
1. Is there any tool that further compresses the Extended ROM? (My ExtROM ist full but I would love to put some more programs inside)
2. My target is, that the XDAII will need about 5 minutes after a hard reset to install all the required software and get back the old settings. Will a backup with ActiveSync also remeber the favorits, connection settings, program settings aso.?
3. Is it possible to flash with the speed of USB 2.0? Until yet I have only tried with USB 1.1. (because I use a PCMCIA-card to provide USB 2.0 and the flashing manual says not to use an USB hub).
Thanks for some more tipps & tricks...
Bobopopo
@bobopopo and @admiral_k
Hey, I see your are also O2 customers in germany and also have the
homezone feature of O2.
When you did the upgrade, you also upgraded the radio stack...
I think the homezone feature is linked to radio-stack, so Homezone-Control will not work with t-mobile radio-stack.
I see two options... leaving out the radio-stack upgrade or forget the homezone-control.
Could you please write your impressions if it's worth upgrading the radio-stack. Actually if have the homezone-control disable most of the time so I would not really care, but it's nice to know that i can check if I am in my homezone... ( really interessing if you surf the web via local dial-in numbers... )
regards
Alex
Until now I did not see any improvements on the Firmware of the XDAII, but the T-Mobile ROM is working fine...
Regarding the Homezone control, I am pretty sure that this has nothing to do with the radio stack (Reason: After upgrading the whole firmware, the Homezone has been indicated (after a softreset) and disappeared after the next softreset.
So I think the Homezone control is dependent on the Ext. ROM (that I cooked myself by taking some of the new T-Mobile Ext. ROM and some of the old o2 Ext. ROM). Maybe I just didn't find the right mix.
I'll post a solution as soon as I find one...
Hi guys!
I am in a simular situation, I hava MDA II with T-Mobile OS and a German O2 subscription.
I would like to add the auto config for O2, could this be done, if yes how specifically can this be done.
/L-O
hi alls
who can tel me how the way that i can resetup WM2003SE from WM2005
because WM2005 not Hard reset and any programsnot work on it
thank you
mmbmvc said:
hi alls
who can tel me how the way that i can resetup WM2003SE from WM2005
because WM2005 not Hard reset and any programsnot work on it
thank you
Click to expand...
Click to collapse
WM2005 Hard Reset
Press power putton
Then press Record Button
Then Press Camera Button
Then with Stylus press Reset Button
Use the recorder button and the camera butoon to scroll and change values.
In your screen you can see 3 options.
1 Kit = YES ------------------ change this to NO
2 Register Hive= No -------- should remain NO
3 Storage = No ------------- change this to YES
then press the big round button(nav pad between the call and call end buttons)
the device reboots.
you go to bootloader by press Power + round big button + soft reset, then downgrade
no need to hard reset
ActiveSync doesn't work
I can't downgrade to WM SE because ActiveSync does not work
I could downgrade using bootloader mode nevertheless ActiveSync did not connect my device.
I have uninstalled AS 4.0 and installed AS 3.8, but it doesn't work! I can connect my XDA II. Could you tell me what is the reason?
Yazzon,
I have downgraded without any issues. A matter of fact, I kept Active Sync 4.0 instead of going back to 3.8
What is the issue with Active Sync, have you tried uninstall and reinstall? Which version of Active Sync are you using?
I've reinstalled AS versions: 3.7, 3.8, 3.8 - Polish. After reinstallation, when I cradle my device, AS connect XDA II but I can't explore device and I can't synchronize. I reinstalled AS many times but no results.
In order to return from wm2005 to wm2003se I used himaupgradeut_197.exe in bootloader mode and the original file nk.nbf of wm2003. To me he worked to me.
I used activesync 4.0.0.
Also it is possible to install wm2005 again using himaupgradeut_197.exe.
Please Help me! Can't downgrade!!!!
I tried: himaupgradeut_197.exe in Serial Mode
I tried: hard reset. Didn't really do anything
What did I do wrong. Always get a connection error... 101
Please Help!
In order to upgrade to 2005, you have used himaupgradeut_197.exe?
ive downgraded by puting it 2 boot loader mode and then put it in the cradle (with AC 4.0) and then run the HimaUpgradeUt.exe from my rom.
and it was 2003se again
Downgraded from WM2005 to 2.20
:arrow: I downgraded from WM2005 to 2.20 without any problems .
Extended ROM sill working .
And I am keeping ActivSync 4 becouse giving me no problems .
By the way ... My ActiveSync 4 Build 4328 .
Is it the latest one ?
I think the key to a sucessful downgrade from WM2005 is to keep AS 4.0 on the machine while you have WM2005 on your PPC. After the downgrade you can go back to AS 3.8. In my case I decided to keep it .
However I ran into one issue with AS 4.0 after the downgrade. After installing MS Voice Command 1.01, I tried to upgrade to MS Voice Command 1.5 and it keeps complaining about not being able to find previous versions. I went to another machine with AS 3.8 and tried the same thing with the same files and I had no issues.
Nonetheless I am keeping AS 4.0 until I run into something I don't have a workaround.
I got AS 4.0. I did not upgrade with..._197.exe. I did it with some other.
Maybee someone can give me a link to a clean 2003se without any nicknack? Maybee that works. Used the aussie version. To downgrade.
Thanks in advance.
Upgrade WM2005 with bootloader v. 1.06
Hi all!
Has there anyone upgrading to wm2005 with bootloader version 1.06? Thought of trying it too, just that afraid can't downgrade to wm 2003 SE. Coz I'm aware of dcs threads, with bootloader version 1.06 it isn't likely to downgrade from wm 2003 se to a normal ppc 2003(of which is of the original rom). Hope to hear inputs. thanks.
ferioz
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
maniak said:
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
Click to expand...
Click to collapse
From which Rom version are you trying to downgrade? What is your bootloader version?
Downgrade to WM 2003 SE
To those having problems in downgrading, this might help...
I was just trying out of the thrill for the new wm 2005. Before that my previous Rom version was WM2003 SE. Flashing to wm 2005 was rather smooth sailing; there isn't any hindrances like country id error code and so forth.
Thanks for those threads from the geekz here like softworkz, xda2jojo, dewild1(who's been reincarnate into a new creature at xda-developers ), and other geekz who's involved in this so called immature(by MS) project. I was literally read their threads and get the ideas from it.
Was initially excited on the new OS, but when I start to touch on it, oh well, it's too good to be true... Nah not to critize much of this... The bottom line, it's a total new looks and new sounds, especially on the click at the start menu, I kinda like that new sound... Good interface but it has lots of buts...; camera button wasn't bound, so when click on camera button is just like a dummy button...
While I'm typing this, my downgrade process is still working at the background, so I pretty much believe that it gona work as it still does the process, so confidently would want to contribute what I did to downgrade.
1) Sit back relax, don't panick = it doesn't/will never bring to solution. Take a deep breath and always feel with hope
2) All you need is to be able to get the device into bootloader mode, my bootloader version is 1.06, so wouldn't be sure if it works on other version, hopefully yes.
3) During the bootloader mode, dock your xda 2 onto the cradle, and get ready of your previous Rom files, double click on HimaUpgradeUt.exe and just wait for it to start doing the magicX...
I hope I didn't misss any step here, even if I did, please excuse me, coz i'm just a newbie hehe....
Ok hopes of getting back your xda 2 alive is yet to process, just fireaway
ferioz
maniak said:
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
Click to expand...
Click to collapse
go to bootloader b/4 you put your device into cradle
Weeeeeell -
i have no clue why! but I managed to get it running.
I just inserted into the cradle and it worked!
Sometimes you just have to go to bed and try it the next morning
Only thing I did was to pull out the Battery over night... Maybee that did something.
Just for Info:
Bootloader V1.02
ROM : Can't See is just upgrading @ moment.
Btw: The good thing about Wm2005 it is working even if you have no energy anymore... No data will be lost. The Bad thing you lose 128 megs of Ram...
i suggest 2 read this:
http://forum.xda-developers.com/viewtopic.php?t=18122
it discribes how to flash ur phone
Hi all,
Since I'm an owner of the Orange SPV M1000 I have been following this forum with great interest, especially the upgrading to Buzz' WM2005.
I already succesfully upgraded the original WM2003 ROM (1.66 WWE and Radio 1.10) to the Diamonds 1.2 WM2003SE with Radio 1.18.
After carefull reading of all posts regarding the upgrade, I decided to take the risk, knowing that it should always be possible to go back to Diamonds 1.2 ROM.
I decided to use Buzz' 1.50i96 ROM together with the radio 1.17 ROM.
I didn't succeed in installing the ROM because of the Country ID error, although Diamonds 1.2 ROM and Buzz' 1.50i96 ROM both have operator ID 02 and language ID WWE.
I followed the steps described in 10 steps.txt and manually set operator ID to O2 for both the ROM and radio. I suspected the latter was causing this problem.
This didn't solve the problem. Then I found on XDA-Developers ftp the HimaUpgradeUt_noID. This time the Country ID error didn't occur and I could proceed with the installation. The installation went smoothly and after half an hour I was booting into WM2005.
Curious as I was I immediately tested all buttons and luckily all of them, including the camera and record buttons, are working.
I setup the phone and gprs settings and the phone/sms/gprs are all working fine.
Overall WM2005 looks very nice to the eye and feels more responsive in terms of speed. No crashes, hickups, lockups or reboots.
Then I decided to setup ActiveSync using the cradle, knowing that ActiveSync has problems of its own. Again I carefully read all posts regarding Activesync 4.
I deleted the old partnership, uninstalled ActiveSync 3.8, rebooted and installed ActiveSync 4. After connecting the PPC, ActiveSync saw the device, but was not able to connect. Then I remembered a post regarding the problem of ActiveSync while using VPN.
After disconnecting the VPN ActiveSync could connect and synchronize.
FYI, I have bootloader v1.06, but all buttons work.
I would like to thank Buzz for his great effort to make this upgrade possible for us.
If someone has questions about this upgrade, feel free contact me.
Take care,
Richard
WM6 Essentials project DISCONTINUED due to lack of patience with idiots
ROM you have been waiting for. Clean, stable and fast.
This ROM was the reason for ending my previous project with Vlodeck. I started to make it few weaks ago, the day I notticed that clean WM6 has leaked MS labs. I grabbed it and started cooking, throwing all previous progress away. And now, I do not regret.
ROM you have here is the most clean thing you have seen on Charmer. I hope it's also the fastest and the most stable one. All packages that were added to privode aditional functions as camera, mms and others were doublechecked for unnecessary files and registry entries before they were gently inserted inside, tuned and approved.
I tried to remove all possible bugs, but there are few of them that I wasn't able to solve yet:
v. 000.5b WM6 Essentials known bugs
- for the first time after startup, it's sometimes impossible to activate HTC Black theme correctly, switch to Windows Mobile Green, then HTC Black applies correctly (probably tsk file issue)
- power patch correct application is still necessary
- system does not remember word completition set by user - it remembers default settings after reset (defaultly switched off)
Download
v. 000.5b WM6 Essentials
http://www.megaupload.com/?d=WPI87C3I
http://www.filefactory.com/file/691aed/
http://rapidshare.com/files/59969691/000.5b.zip.html
aWizard complete update package - v. 000.5b WM6 Essentials
This archive contains full dump of really smoothly operating device - my device. It contains Radio 02.19.21, custom bootscreans, absolutely empty extrom and 000.5b ROM. Use it only on unlocked devices and if you know what are you doing. Flashing this is easy, but it cannot be done from bootloader. No more comments needed...
http://rapidshare.com/files/61181560/essentials000.5b_aWizard.7z.html
Old versions:
v. 000.4 WM6 Essentials
http://rapidshare.com/files/51447784/Essentials000.4.zip.html
http://www.megaupload.com/?d=HSF6TKRX
http://www.filefactory.com/file/83724f/
v. 000.2 WM6 Essentials
http://rapidshare.com/files/40428170/Essentials_000.2_distrib_1.zip.html
Changelogs:
000.5b WM6 Essentials
This is just a minor build, just with some settings and details I want to have set up right after each HR. It brings just a little performance bonus due to larger filesystem cache
- removed windows live and its today plugins
- removed original tray application, permanently replaced by traylauncher
- replaced back original wm6 wallpapers
- clock set to "Display clock on the title bar in all programs" by default
- clock set to display date and time in title bar
- today plugins disabled by default
- cleartype used by default
- increased filesystem cache
- GPRS connection bubble includes "Disconnect" button and timer now
000.4 WM6 Essentials
- HTC Touch Dialed added (modded key font)
- HTC Black theme added
- HTC Touch CommManager added (necessary registry only)
- small registry cleanups
000.3 WM6 Essentials (unreleased)
- removed camera mode "theme"
- removed obsolete camera registry entries
- removed Windows update
- repaired IE to work with PIE Plus 2.2
000.2 WM6 Essentials
- first release
Unlock your device, you will avoid problems with flashing and it makes flashing much safer and easier
Unlocking your device brings more comfort and safety. You will never more need to download aditional files - files I'm providing will be enough. It's also almost impossible to totally brick unlocked device - there's allways a way back (if bootloader is not damaged, of course). Locked devices has problems with some common recovery procedures like SD card image flash. If you have locked device, you have a great chance to spend your money to a service company for such simple thing like unlocking is...do it yourself NOW.
Here is the working guide:
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=437&PN=1
Excellent flashing guide for czech users is available here: http://mda.force17.net, made by Trash. Czech translation of unlocking procedure is here: http://www.ce4you.cz/forums/view_topic.asp?t=24991
This ROM is provided AS IS, with no warranties from me, xda-developers server or other parties. Use it at your own risk. Use it only if you know what are you doing.
If you do not like it, don't use it. Use another one, freely modify this one, do anything you want - but do not bother me with stupid begging like "can you add total commander in this rom" - I can, but I will never do it. The same with HTC X-button, backup apps and other useless but popular junk.
Post non-technical suggestions and ideas here:
http://forum.xda-developers.com/showthread.php?t=314776
Let's keep this thread clean with the stuff that's only technically relevant.
PROBLEMS
If somebody has problem others never seen, he:
1) uses some 3rd party software. if I'm asking for this, report ALL 3RD PARTY SOFTWARE, not just one you thing has something to do with error. report all
2) his obscure extrom was executed and some untested cabs, often for other systems, were installed. PREVENT EXTROM EXECUTION even if you think it's harmless.
3) he is using smoe uncommon accessories (gps, handsfree, a2dp.....). Report this
4) his device is damaged. throw it away.
We, charmer owners, are in a big advantage: all devices are the same. No MB revisions, no G3/4 problems.
Common debug procedures if you have an error:
1) try to look if others has the same issue.
2) if not, hardreset device and try if error is still present BEFORE YOU INSTALL ANY OTHER APP
3) if this issue seems to be application sdpecific, install JUST THIS ONE APP and try it. be sure you are installing latest build of your app
4) flash latest official ROM and try your app
5) flash WM6 ROM again and repeat procedures 1 - 3
Previous steps are leading to discover if this is clear system error or is related to any 3rd party app. You will clearly see if it's ROM or application issue. If it's hardware problem, it's harder to say...
If it's ok after HR or new flash, perform following steps to check:
1) leave all settings as they are in defaults (including local settings, timezone etc)
2) if it's app specific, install this app. if not, skip this step.
3) perform step-by-step check: change one thing you usualy do, softreset device and check behaviour (eg. change timezone, softreset and try)
So you will discover hidden error dependencies. Sometimes you will get really surprised what can cause errors...
Hope this simple guide will help you to analyze your charmer errors and will help me to get rid of strange questions...
Error [222]: Device Not Responding
Hi, first of all, many thanks for your job.
I have a problem as soon as I star.
I run ROMUpdateUtility_NoID.exe and when trying to connect to my PDA I get the following error message: ERROR [222]: DEVICE NOT RESPONDING.
My Charmer is connect through the USB connection and activesync is connected.
Anyone has any idea on how I can solve this problem (I´ve tried with other USB ports but nothing... :-( )
Thanks in advance for your help.
For activesync troubleshooting, see http://www.htcamerica.net/support/8525/troubleshooting-guide.html
First, hardreset your charmer. During the meantime, reset your computer - do not connect charmer untill your pc is restarted...hope it helps. You may also try to reinstall activesync - or try it from another computer (it's not necessary to setup activesync partnership to perform rom upgrade)
No booting after update !!
Hello,
i have one question :
I had the wm6 rom : ver 004.4 -=- CHARMER WM6 WWE ROM by vlodeck & nocturne installed on my charmer.. worked fine. No Problems. Today i saw that there is this new one "WM6 Essentials". I flashed my charmer with this new rom and flash method 2 (i also used method 2 for the old wm6 rom). Everythink was ok but after hard reset my charmer stuck at the very first splash screen ( This one where the IPL, SPL and OS Number is beeing displayed). The Phone just did not go on. After another hard reset -> same problem.
I then had lots of problems to get my charmer working again... all the old (even official) rom updates didnt work. But at last i downloaded an obviously newer (than mine) AKKU 3.3 from t-mobile site and was able to flash the device with that one. Now the question : Is it possible that it didnt work because i did not downgrade to an official wm5 rom before upgrading to that new wm6 or do you think that i should not give it a new try because it seems to be another problem ?
many thanks for your answer(s)
If you want flash other WM6 and you have WM6 you *MUST* first downgrade to WM5 and finally flash WM6.
The most successful method has always been to install an official wm5 rom before trying another wm6 rom.
pjam
many thanks for your fast answers.
i tryed it again after downgrading to the official wm5 and now it works fine.
After the flash and saying "Congratulation you flashed it" it died. There goes my charmer to waranty again....
WM5
ZoNki said:
many thanks for your fast answers.
i tryed it again after downgrading to the official wm5 and now it works fine.
Click to expand...
Click to collapse
I don't have official WM5. please
Official WM5 Rom
I do only have a link to the GERMAN Version of the official wm5 rom but if you want to upgrade to wm 6 it doesnt matter i assume.
Use this link :
http://www.t-mobile.de/privat/0,1788,13082-_,00.html
Click on "mehr.."
Then "Software / Konfigurationen"
-> "Gerätesoftware"
Then you can download "Software-Update AKU 3.3
ZoNki said:
I do only have a link to the GERMAN Version of the official wm5 rom but if you want to upgrade to wm 6 it doesnt matter i assume.
Use this link :
http://www.t-mobile.de/privat/0,1788,13082-_,00.html
Click on "mehr.."
Then "Software / Konfigurationen"
-> "Gerätesoftware"
Then you can download "Software-Update AKU 3.3
Click to expand...
Click to collapse
U.S. Downloads are here: http://www.tm-phonedownloads.com/index.html
user989 said:
U.S. Downloads are here: http://www.tm-phonedownloads.com/index.html
Click to expand...
Click to collapse
Wery Thanks
NEW version is out, released 21:22 GMT+1
New ROM version is out...
Hello Mr. Nocturne.op.15. IS IT REALLY WORK ON MY QTEK S100?
No, this ROM is working only on charmer and also on microwave ovens. Put charmer inside oven, turn it on to max power and wait until image download from charmer to oven is completed (this is indicated by battery explosion). Enjoy nice pieces of hardware all around your kitchen, they are WM6 powered.
Wrong
This didn't work on my microwave oven at all. I have a Daewoo microwave oven and it is white. All that happens when I try to flash the rom (on full power) is that there is a strange smell and my Charmer stops working. There are sometimes some sparks.
The microwave now won't get past inital boot loading - there is a big while light and I have a TMobile screen and there are pink squares all over the microwave.
Thanks a lot nocturne and vlodeck - I now have a WM6 microwave but the softbuttons don't work properly and they are very hot to touch. And can I have a German version please?
nocturne.op.15!!!! you bastardo! me charmer no work! it smell not good.
littld: I doubt it, there will be a german translation unless someone from germany wants to do it, go ahead
Isn't it possible to use an original German O2 XDA Orbit WM6 and add the charmer drivers / reg entries to it?
Is there anything else to do?
members.htc.com ->
RUU_Hermes_O2_DE_3.54.207.2_6275_1.47.00.00_108_Ship.exe
Hi people,
I'm Luca from Italy, and I'm writing here hoping that You can help me to recover my dead PPC.
My PPC, when living, had Windows Mobile 5 like O.S.
So, As i've some problems with the phone I've decided to downgrade the radio version from 1.17 (people say that it is buggy) to 1.08.
So i run the HimaUpgradeUt_noID (I've also HimaUpgradeUt), but i've forgotten to delete the NK.nbf file from the directory.
I put the PPC in bootloader mode (SERIAL on top and ver. 1.06 on bottom) and then to the cradle directly to the motherboard USB connector
The sofware begin to update upgrading even ROM CE file, but when it arrived at 31% himaUpgrade stopped its work, showing that I need to reset (only normal reset and not soft reset) the PPC From this time until now my PPC show always and only the bootloader view.
When I try to upgrade again, the himalaya soft don't show what my PPC has like rom or radio version. It shows only the Ce rom and Radio that I'm going to ugrade.
It seems that software isn't able to erase ROM IMAGE
Active sync can't identify the device (some time it is indentified as unknown device).
When i start the software for ugrade the Active sync tray icon disappear.
I'm only able to ugrade radio stack or ExtRom.
PLEASE PLEASE PLEASE, HELP ME.
P.S. The device is unlocked
2 hits
http://www.expansys-kr.com/ft.aspx?k=21161
"Edited:- Problem solved, I loaded the upgrade from a different PC. I don't know why my main PC would not work as that is the one I regularly sinc the pocket PC to, but it just kept aborting the upgrade. Anyone else having this problem, try another PC."
if you're lucky
http://forum.xda-developers.com/sho...t=Failing+ROM+Update+Jam.+Error+112+CE+Failed
"it was stoping with an upgrade error at the very beggining of the extended ROM flashing no matter which ROM you were flashing to it! At the end they exchanged it for a new one, probably the ROM chip was faulty!"
if you're unlocky
Hi Rudegar,
first MANY MANY MANY THANKS for Your support.
I'm very unlucky.
I'm not able to upgrade my PPC.
The strange thing is that i can upgrade Radio Stack and even Extended Rom!
Only CE ROM wont' update.
Previous CE ROM installed was AKU 3.5 and Windows Mobile 5.0
Everythings worked fine.
Non other way?
I've seen that after launched del himaupgradeUt_noID the Activesync tray icon ho away.
My PPC sometimes ins't "seen" by my XP while other times it is "unknown device"
Why Can I only update RADIO and Extended Rom, while CE Rom not?
... P.S.
evey kind of button that I push the PPC is always in Bootloader Mode!
I'ev tryed: POWER + CAMERA + REC + STYLUS over the hole.
When I put the PPC to battery charger, red led is on until nothing is on the display, while when there is the written over the display, led is off.
No way to help me?
No news? I'm so sad
hello. i have the same problem but i have some suspections: i have 3 wersions of wm6 roms. one weight is 64 mb and others 32. and i tkink we are trying install rom from htc, dell or ipaq to our mda or other... so- **** this wrong rom and search for normal rom for himalaya ->
take this one :
"
mirror in china ,but very rapid downloading
http://exs.mail.qq.com/cgi-bin/downl...3f0dd183418032
enter the code e506cd02 then go
thx to c_shekhar
"
screenshots: wm6 pro. : http://www.engadget.com/photos/windows-mobile-6-professional/
cheers