slipstreaming widcomm stack - MDA II, XDA II, 2060 ROM Development

hi, is a bit of time that i don't read xda-developers pages...
[OT]
however... i've discovered a thing... by now the wm2003se it's not good for qtek2020 (and i don't wanna it )
i've tried some 2003se roms, but i think that 2003se is not good for operate...
all PPC software looks ugly (most of the famous software is not yes updated for 2003se)
and i don't really need landscape view :wink:
[/OT]
so... a more important thing for me is the bluetooth stack!
today i've done an hard reset (flashing rom for exactness).. and i've to re-hack bluetooth stack another time
there is a way to "slipstream" widcomm stack in the 172WWE or in the more recent versions ?
--------- edit: ----------
probably i found the answer alone.. i can edit nk.nbf file for slipstream widcomm file inside the 172752WWE version...
i only need the password (i've already searched the forum :? )
and... i need also an hint... someone has hints for a good extended rom ? (with password :wink: )...mm not customized ones.. just qtek ones
bye, waiting replies

i'm hearing a little faerie that says: "the nk.nbf rom can't be edited!!"
is the faerie says right?

Related

WM2003SE for Qtek 2020

Is there someone who prepared a WM2003SE for a QTEK 2020. I really want to do it myself but it seems that it doesn't work at me. I live in Belgium and we don't have such great operators as O2
Please help me because I really want to use it also. Is it possible to upload it? There are a lot of Belgian users who also want to use it, but there is even no Qtek-site for us.......
Thanks in advance
You can try this one?
http://www.t-mobileapps.com/downloadcenter/Software_Detail.cfm?ID=50
I am installing it now, i have a m1000 and using a O2 rom for quite a while now... (flashed already couple of 3/4 different rom in my phone )...
I use er2003edit to change the operater id's... It works great!
(i am from holland...)
if you need help you may try to contact me at msn ([email protected])...
-edit-
oeh, dunno if this is a 2003se upgrade (will see in a couple of minutes...)...
my source of that link is
http://www.pocketpc-club.nl/forum/showthread.php?t=29563
(its a dutch forum)
dammit, i need to register, again an edit:
i gave wrong link in the first post:
http://www.t-mobile.nl/zakelijk/htd...mda_upgrade.asp
this is where i downloaded this file:
HI_TMNL_17200_190_11700_Ship.exe
Yes, Roeleke,
You can upgrade to release 1.72.00.WWE for a Qtek 2020 Belgian retail. I've done it a week ago. I'm using a Qtek 2020 with Proximus.
The upgrade rom was placed on the resellers site. I downloaded it and it was an .exe file. Just run, be patient - it least an half an hour - and your Qtek is running up to date.
If you have problems to get your update, please contact.
Greetings,
Jean
roeleke1 said:
Is there someone who prepared a WM2003SE for a QTEK 2020. I really want to do it myself but it seems that it doesn't work at me. I live in Belgium and we don't have such great operators as O2
Please help me because I really want to use it also. Is it possible to upload it? There are a lot of Belgian users who also want to use it, but there is even no Qtek-site for us.......
Thanks in advance
Click to expand...
Click to collapse
it's not 2003SE though
just plane 2003
RUU172602WWE_Belgian_Shipping.exe has been on the ftp a long time now, and yes : it's not SE.
Radio is 1.14
and a few things in the extended ROM can/should be updated:
CallerID,Camera,MIDI
I finally got round to upgrading my belgian Qtek2020 to 2003SE
Code:
Rom Version 2.06.00WWE (Qtek)
Rom Date 06/14/04
Radio Version 1.18.00 (Qtek)
Protocol Version 1337.38
ExtRom version 2.06.M4io (Qtek)
Downloaded it from here a long time ago, so don't know the exact thread.
Everything in my extrom can be found in the forums, but i can attach them if people want it.
I did change the Cabs (removed HTC/customize reg key) so they all appear separately on "remove Programs". And I put my name on the splash screens.
Extrom :
Code:
ExtendedROMUnlocker.arm.CAB => Name says it all
Caller_ID_WWE_RC10.CAB => Photo Contacts 1.20 including ringtone assignment
CamereRC16_Hima2_WWE.CAB => Camera ver 2.50
CameraRC16_Streaming_reg.CAB => more stuff for camera
MMS_v2.0.0.13_BA_WWE_0831.CAB => MMS Addin (mms now handled by inbox, I haven't sent/received any yet)
battery_OU_081304.sa.CAB => nice, small battery in taskbar add in
Version_OU.sa.CAB => only put the extrom version in Reg
CprogHook.WM2003_2577.CAB => Mamaich phone contacts button
JAVA_PPC_10.1.0.17_HIMA_WWE(unremovable).CAB => Tao Java support for PPC
MIDI561.sa.CAB => soundhandler definitions (wma, mp4, 3gp)
VideoMMSB21.sa.CAB => Video mms made easy
GB_SOFT_Tweak.PPC2003_ARM.CAB => GPRS Control panel addon
BE_retail_V4_WWE.sa.CAB => Settings for Proximus/Mobistar GPRS/MMS
regedit.CAB => PHM Regeditor, nice, free but no import
CheckNotifications.CAB => fix for bug in Eventnotifications Database
SMSDeliv.ARM.cab => same as dorucenka.ARM.cab => Set SMS delivery report default on
Remarks so far :
+ looks nice, Landscape is nice, but TomTom 3 does not support landscape
+ I like the incorporation of MMS in Inbox (could be that it works on 2003 also, but haven't tried)
+ seems faster, but could be that just after upgrade it is always faster.
- Bluetooth Profile on today screen becomes invisible sometimes, but i moved it up under Owner information and I can still check/uncheck it when it is invisible
+ my bt handsfree/headset works fine (I still don't know the difference between headset and handsfree ) but i can pickup, speak,hear & hangup with it.
+ my bt GPS Holux works fine.
+ TomTom works even better with BT gps than with 1.72 where (on my device) it hung when GPS receiver was not on.
I didn't test much with it, so don't blame me if you do the same and are not happy with it.
BE_retail_V4_WWE.sa.CAB
Hello,
I just bought a german MDA II. I will rebrand it and need the settings for proximus after. Could you please post the settings or perhabs make the
BE_retail_V4_WWE.sa.CAB available for download. Thanks
M4io
Can you do an attachment of your ROM ??
I like to want to put your ROM in my QTEK
Thank you
no link is working evert!
evert,
i have a mda2 with
rom 1.72.00wwe
radio 1.17.11
ext rom 1.72.190
and did try to download from the link you submit..
i get nothing
can you send me the update? or better .. post it here?
thanks
roland :?:
I am not sure this is the correct one, but this is the only one i have left on my harddrive (1.7x)
Uploading now, moment
NOTHING MORE THEN LATEST VERSION OF 2003...
:shock: sorry but this is nothing more then the latest version of 2003 normal edition... nothing 2003 se on it...
this is the 2003 version i have allready on my mda2 because
i will wait paitience for a good 2003se...
my mda2 it to important to play with non official software...
i would only used 3th party if it was from lumpi ....
in my mda 1 i his software and since that it is very stable..
anyone knows a stable and good 2003 se for t-mobile Holland?
Thanks a lot..
may also be a original qtek 20202 2003 se
adeus

WM2003SE v2.20.07 WWE

I have the 2.20.07CHS ROM installed but I found some strange folders and the font letters are outside the display (in some screens).
Anyone have the 2.20.07 WWE?
I can't find it...
It exists??? :?
Anyone have the same problems I reported?
:idea: <Sorry for my poor english!> :idea:
RE
Your version is translated from Chinese. Due to the fact that its NOT 100% translated you'll get those strange looking folders/boxes/fonts which are actually in Chinese if you've a Chinese software installed to see them.
Re: RE
FOSA said:
Your version is translated from Chinese. Due to the fact that its NOT 100% translated you'll get those strange looking folders/boxes/fonts which are actually in Chinese if you've a Chinese software installed to see them.
Click to expand...
Click to collapse
Ya! I know that. But I don't like it this way.
There are a 2.20WWE?
Is better to downgrade?
Someone can tell me, please?
There are (or not) a Himalaya 2.20WWE ROM?
Now, ROM 2.20 WWE does not exist.
It doesn't occur in this time.
Still wait for some operator to release it.
So, what the best WWE ROM?
2.02t or 2.06?
I like the Media Player 10 but I hate that chinese characters appearing all the time.
why dont you try the 2k5.. it does have the wm10 and got alot of changes (*better in my opinion, still have some bugs on hardware/soft) but its only minor for me..
make a try.. :wink:
WM2005 experience
I have tryed the WM2005 but seems to me that is a buggy OS.
Don't you think?
Don't try with 2k5, that's will not satify or you try.
hmm.. not for my experience.. my 2k5 is loaded with programs... and works brilliant.
sad part, i must keep stopping all programs manualy using Running Programs all the time.:-(
:wink: I will try again! :roll:
WM2005 need some tunning, right? :?
Something about the ROM.
MSN Messenger.
Synchronization issues by USB.
Anything else? :idea:
It is possible to fix those problem by a patch.
those "strange folders" are "Start menu", "Startup", "Favourate" and "Program" in \windows
You can change those folder to its english name however you must find them in registry and change them too.
some registry need to be translated such as :
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ConnMgr\Destinations]
you can guss they are "Internet settings" from "Internet ??" etc
Issue of font size can be fixed in
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FontLink\SystemLink]
[HKEY_LOCAL_MACHINE\System\GDI\SYSFNT]
[HKEY_LOCAL_MACHINE\System\GDI\V1\FontAlias]
However i doubt there is anyone still interested in this version.
I dislike some bugs of it which I don't know solution.
such as taping connection icon will lead to hang up if flight mode is on.
I like some program in this CHS extrom such as battery indicator and that flight game.
2.20 ROM
I am just wondering, does anyone know where to find the 2.20 ROM file? Either in Chinese or English?
latest wm2003se rom
My cousin just bought an Acer PDA with the wm2003se 2.20.07 wwe. How can the rom be extracted from the pda. If that can be done I may be able to post it here.
Re: latest wm2003se rom
mrh said:
My cousin just bought an Acer PDA with the wm2003se 2.20.07 wwe. How can the rom be extracted from the pda. If that can be done I may be able to post it here.
Click to expand...
Click to collapse
i don't think that acer has windows mobile 2003 se PHONE EDITION and nobody can take rom from one device to another (not even from alpine to himalaya) so it would be useless
i'm staying with wm2k5
Sergio_Bandeira said:
:wink: I will try again! :roll:
WM2005 need some tunning, right? :?
Something about the ROM.
MSN Messenger.
Synchronization issues by USB.
Anything else? :idea:
Click to expand...
Click to collapse
That's it! I'm trying WM5 again (since two weeks ago).
ROM 1.60a is great and I recommend it to everybody.
This version just lacking one thing: a 32MB permanent storage (it have 2x16MB now).

How's WM2003SE doing nowadays? Latest versions ? WM2005 prob

Hi,
After returning a few times from WM2005 to WM2003SE I stay with the full functioning WM2003SE version.
I wonder if there are still new versions of WM2003SE developped and what the latest version are. Or are the all on the xda developpers FTP or buzzdev site?
The main reason I returned from WM2005 was :
--------------------------------------------------------
TomTom5 not working, have to patch exe file with editor.
No XBackup
Very poor cameraquality
Memory problem (also buzz 96 version experienced same).
If any solutions yet (or all) please post
I read also a whole page on this site to patch the memoryproblem a bit.
A new version would be easier...
Thanks,
Innovator

2.06 ROM with BT of 2.20 ?

Hi all,
I have been wandering around looking for different posts in this forum, but I haven't found what I am looking for.
I've tried 2.06 and 2.20 ROMs. And definitely, I prefer the 2.06 one.
Good. So keep it, you must say.
The problem is that my car kit has handsfree profile, and no headset profile. I succeed in using it with 2.20 ROM.
So my question is :
is there a ROM somewhere which is a 2.06 ROM with the BT from 2.20 ?
Or same question but another way of saying it : is there a 2.06 supporting handsfree profile ?
Thanks a lot in advance for your answers.
Regards
Blg
where did you see such rom?
the newest i'm aware of is 2.03 beta by TofClock
The 2.20 ROM is a CHS ROM, translated from chinese.
The 2.06 is a WWE ROM, very widespread. Strange you haven't heard about.
I have finally solved my problem : the 2.02.t1 is very similar to the 2.06 and has the handsfree profile. I have noticed a slight problem in this ROM : the HP is cut when the screen goes off. Disturbing when you use the phone a long time...
Could you post link to this ROM?
Are you sure it's Himalaya ROM?
yes I am sure that 2.20 is for Himalaya, I have installed it on my 2.20.
But I have erased it from my HD since it doesn't fullfil my needs....
I am going to see if I can get it again.
But onestly, it is very unstable. I don't recommend it....
Was it AKU 2.2 version?
look at this topic :
http://forum.xda-developers.com/viewtopic.php?t=39938&highlight=2+20
they are talking about the 2.20
LOL, i was talking about WM5
OK, I understood :lol:
WM2005 doesn't work well on Himalaya, I haven't ever tried it on Himalaya ! WM2003SE works well on himalay, it is sufficient for me.
WM2005 works ok on Himalaya, but slightly slower

i-mate Smartflip

Hey,
Newbie here. I own two smartflips bought from i-mate hq (Dubai). However, i'm now in Aus. WM6 looks nice and i must say, great work and appreciation for those who cook up these ROMs. However, i noticed that all these ROMs start off from either Cingular or QTEK or HTC. why leave i-mate ROMs behind guys? Anyways, before i try out any of these ROMs, i just don't want to end up killing my phone. I've searched high and low for i-mate stock ROMs (WM5). I saw one in a post but that was like WWE or something which i'm not sure what it means. I don't want to register on i-mate and do loads of form-filling and IMEI filling just to get some ROMs. Anyone have any idea of where i can acquire some 'stock' WM5 i-mate ROMs (not qtek or cingular or htc or wotever).
The other thing.. i haven't SuperCID-ed my smartflip. I tried to get to the bootloader (for no reason.. just experimenting) by pressing the keys n all but it doesn't show up. it goes to the i-mate screen.. then flashes an HTC logo and boots WM5. Once again my smartflip is Out-of-the box, hope that helps someone explaining the phenomena. i do have the i-mate CD that came with it. However didn't find and option to install Windows Mobile 5.0. I need a ROM to keep a backup in case i screw up. If anyone could help me obtain an i-mate WM5 ROM, it would be greatly appreciated.
Also, how would one find out the IPL and SPL of the smartflip? As i mentioned i wouldn't like to brick my phone. It is mentioned somewhere that the 3.06 or wotever IPL and SPL version are not capable of flashing through micro-sd card. Not sure but i think the 4.0 or wotever can flash through micro-sd card. Apart from the link(to files) posted in a thread, isn't there an 'official' way of getting to update the IPL and SPL?
Sorry for such a long post. One thing i must say, great work guys. I would like to suggest people to follow up on their threads. there was one 'bricked' post but the person said he found a solution but never posted what his solution was. It would be helpful if he could have posted the solution as it does help others. Apologies if i said anything wrong.
Thanks,
Dan.
You used to be able topick up Imate roms from ftp://ftp.clubimate.com
But they won't be nearly as good as the cooked Wm6 ones. Just follow the instruction and flash away.
(WWE means worldwide english)
Flash one of the cooked ones! I use Erofich's 6.1 and it's great.
WWE just means WorldWideEnglish as opposed to other languages.
Good luck
I have a SmartFlip upgraded with GnatGoSplat's WM6 ROM (Eurofich' WM6 is better but GPRS doesn't work): it works fast and without problems.
WM6 ROM, SPL/IPL and Radio at:
http://forum.xda-developers.com/showthread.php?t=368715
Imate didn't upgrade the SmartFlip's ROM to WM6.
D'rath
D'rath said:
Eurofich' WM6 is better but GPRS doesn't work
Click to expand...
Click to collapse
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Thank you all!
Hi,
Thank you all for your responses. i-mate roms at imate ftp site is confirmed. Thanks unwired. The thing is i take calculated risks and have most info before i do some thing. so if i end up somehow bricking my phone, i will know what to do before dad kills me . Now i just need to update the IPL/SPL and get into bootloader to see if it works. Then gonna flash with WM6 or WM6.1. I just needed a stock ROM to keep as backup because its mentioned somewhere that if your phone is bricked, u can try to flash it using micro-sd card flashing. but that only works with stock ROMs if WM6 flashing fails. Anyways, thanks once again. i will keep you guys updated on my progress.. Thanks!
Best Regards,
Dan.
Erofich said:
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Click to expand...
Click to collapse
I Try WM6.1 but it gives me problems importing old sms (the inbox elements are stocked in send items)... i must import old sms ^^'
Jony_aa with Neo is very nice but the home isn't so custumizable: so i flash Gnat's ROM.
D'rath
PS: My English is very hungly O_O
SDA_ApplicationUnlock
Where can one get the SDA_ApplicationUnlock.exe? the superCID thread didn't mention where to get it or either i missed it... anyone out there to help me??
Thanks,
Dan.
(If i succeed in doing this.. i'll make an Utimate WM6 for STRTRK guide)
IPL/SPL
Hi,
Sorry for multiple questions. I still haven't been able to get into the bootloader by pressing the voice notes and camera and power on key. I'm still not sure how it goes. Do you have to hold the keys, press the power button and let go immediately of all the three keys or do you have to hold the power button for long with holding the voice and camera keys? i need to check which version of the bootloader i have to make sure it supports flashing from micro-sd. Thanks in advance.
Regards,
Dan.
EDIT: I was also looking for some way to backup software from my current WM5 ROM. There are some apps that come in-built which i like. But since i don't have the .cab(s) i was wondering if there would be a way to backup software and later on install it. Any help would be greatly appreciated.
Out of a million tries, I only managed to get into the bootloader ONCE that way. Okay, I exaggerate, but I found it almost impossible to use RECORD, CAMERA, and POWER to get into bootloader. Instead, I've found with the phone OFF, press RECORD, CAMERA, and plug the USB connector into the PC while holding those buttons. It goes into Bootloader every single time that way.
You can back up the built-in apps, but it requires figuring out which files belong to which app, and also getting their registry entries. Then you can either manually copy all those files into the phone and manually import the registry entries, or make them into a cab file to automate it.
WOW.. thnx for that!
Yup! Worked like a charm! i have IPL/SPL 1.02 or wotever.. so i don't need to worry about micro-sd card flashing problems ( i hope i never need to use that in my life). So if it works this way.. i would recommend others who have bricked their phones and trying to flash it holding the record, and camera button while phone is off, plug it in the usb. As soon as i did that, Vista picked it up as a mobile device. the bootloader ( the screen sucks! what a dreadful combination of colors!) also shows a usb sign at the bottom. I hope this info helps those who bricked/killed their phone and were finding it hard to re-flash it. As it is mentioned in some thread... if wm6 flashing fails, u have to revert back to stock rom WM5 (cingular rom for cingular phone, i-mate rom for i-mate, etc) and then re-flash with WM6. I wonder if rom update utilities work when in bootloader connected to pc.
Once again, thanks for your reply GnatGoSplat. As for the apps, yea.. i know its bad. I did check over onto the i-mate site and found a file 'Arabic...' something. it didn't mention it as a rom so i'm hoping they are the software packages that come with the default middleast rom. You might have heard of 'Portableapps' on PCs. They are little beauties. Because the original windows and windows mobile are linked closely.. i might wonder if there could be a way to port those ( or even create your own) onto windows mobile. I know how to make portableapps so if you need any info, i think i could help unless someone knows better.
So where do i get the SDA_ApplicationUnlock file? Thanks.
Regards,
Dan.
Dan_Ultimate said:
So where do i get the SDA_ApplicationUnlock file?.
Click to expand...
Click to collapse
Get it from attach
Thanks.. sadly, i've got some bad news...
Hi,
Thanks for the file Erofich. Unfortunately, I've just been caught up with studies and hence will not be able to work on modding my i-mate until i get some free time. however, i'm still going to try to work on an 'Ultimate WM6 for Startrek Guide'.
Its just that its better for end-users because some of the information is scattered around and 'some' of the instructions are a bit hard to follow (no offense to anyone). If anyone has any concerns or is against my actions, please let me know.
Regards,
Dan
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
moebior said:
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
Click to expand...
Click to collapse
You can translate some menu (in the post of WM6 by Eurofich you find how) but not all of them.
You can get the xT9 with spanish language with a cab you can find looking in that ROOM.
D'rath
arabic laguage smartflip
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
irfansamsia said:
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
Click to expand...
Click to collapse
What's the version of your rom ?
for official rom ( win 5.0 ) , you can go to this topic :
http://forum.xda-developers.com/showthread.php?t=400183
and if you install erofish's great rom ( win 6.1 ) go to this one :
http://forum.xda-developers.com/showthread.php?t=465294
i-mate smartflip
Thanx for repy bro.but same problem ,i update widh this rom..but stil same.no arabic when i try to instal arabizersute its say unsuccsecful..when i try to instal it by memory then also same..plz help me ..i have two device same proble.
Hi
1. do you use from this ro M : WM6.1 Build 5.2.19593 AKU 1.1.7 by Erofich ?
2. second link is specially for imate smartflip then i don't now what's your problem ( maybe don't install your new rom correctly )
3. arabizer must be installed on phone memory ( not memory card )
Good luck !
Thanx bor.its working nice .....thanx again...mawah....

Categories

Resources