Related
hi alls
who can tel me how the way that i can resetup WM2003SE from WM2005
because WM2005 not Hard reset and any programsnot work on it
thank you
mmbmvc said:
hi alls
who can tel me how the way that i can resetup WM2003SE from WM2005
because WM2005 not Hard reset and any programsnot work on it
thank you
Click to expand...
Click to collapse
WM2005 Hard Reset
Press power putton
Then press Record Button
Then Press Camera Button
Then with Stylus press Reset Button
Use the recorder button and the camera butoon to scroll and change values.
In your screen you can see 3 options.
1 Kit = YES ------------------ change this to NO
2 Register Hive= No -------- should remain NO
3 Storage = No ------------- change this to YES
then press the big round button(nav pad between the call and call end buttons)
the device reboots.
you go to bootloader by press Power + round big button + soft reset, then downgrade
no need to hard reset
ActiveSync doesn't work
I can't downgrade to WM SE because ActiveSync does not work
I could downgrade using bootloader mode nevertheless ActiveSync did not connect my device.
I have uninstalled AS 4.0 and installed AS 3.8, but it doesn't work! I can connect my XDA II. Could you tell me what is the reason?
Yazzon,
I have downgraded without any issues. A matter of fact, I kept Active Sync 4.0 instead of going back to 3.8
What is the issue with Active Sync, have you tried uninstall and reinstall? Which version of Active Sync are you using?
I've reinstalled AS versions: 3.7, 3.8, 3.8 - Polish. After reinstallation, when I cradle my device, AS connect XDA II but I can't explore device and I can't synchronize. I reinstalled AS many times but no results.
In order to return from wm2005 to wm2003se I used himaupgradeut_197.exe in bootloader mode and the original file nk.nbf of wm2003. To me he worked to me.
I used activesync 4.0.0.
Also it is possible to install wm2005 again using himaupgradeut_197.exe.
Please Help me! Can't downgrade!!!!
I tried: himaupgradeut_197.exe in Serial Mode
I tried: hard reset. Didn't really do anything
What did I do wrong. Always get a connection error... 101
Please Help!
In order to upgrade to 2005, you have used himaupgradeut_197.exe?
ive downgraded by puting it 2 boot loader mode and then put it in the cradle (with AC 4.0) and then run the HimaUpgradeUt.exe from my rom.
and it was 2003se again
Downgraded from WM2005 to 2.20
:arrow: I downgraded from WM2005 to 2.20 without any problems .
Extended ROM sill working .
And I am keeping ActivSync 4 becouse giving me no problems .
By the way ... My ActiveSync 4 Build 4328 .
Is it the latest one ?
I think the key to a sucessful downgrade from WM2005 is to keep AS 4.0 on the machine while you have WM2005 on your PPC. After the downgrade you can go back to AS 3.8. In my case I decided to keep it .
However I ran into one issue with AS 4.0 after the downgrade. After installing MS Voice Command 1.01, I tried to upgrade to MS Voice Command 1.5 and it keeps complaining about not being able to find previous versions. I went to another machine with AS 3.8 and tried the same thing with the same files and I had no issues.
Nonetheless I am keeping AS 4.0 until I run into something I don't have a workaround.
I got AS 4.0. I did not upgrade with..._197.exe. I did it with some other.
Maybee someone can give me a link to a clean 2003se without any nicknack? Maybee that works. Used the aussie version. To downgrade.
Thanks in advance.
Upgrade WM2005 with bootloader v. 1.06
Hi all!
Has there anyone upgrading to wm2005 with bootloader version 1.06? Thought of trying it too, just that afraid can't downgrade to wm 2003 SE. Coz I'm aware of dcs threads, with bootloader version 1.06 it isn't likely to downgrade from wm 2003 se to a normal ppc 2003(of which is of the original rom). Hope to hear inputs. thanks.
ferioz
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
maniak said:
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
Click to expand...
Click to collapse
From which Rom version are you trying to downgrade? What is your bootloader version?
Downgrade to WM 2003 SE
To those having problems in downgrading, this might help...
I was just trying out of the thrill for the new wm 2005. Before that my previous Rom version was WM2003 SE. Flashing to wm 2005 was rather smooth sailing; there isn't any hindrances like country id error code and so forth.
Thanks for those threads from the geekz here like softworkz, xda2jojo, dewild1(who's been reincarnate into a new creature at xda-developers ), and other geekz who's involved in this so called immature(by MS) project. I was literally read their threads and get the ideas from it.
Was initially excited on the new OS, but when I start to touch on it, oh well, it's too good to be true... Nah not to critize much of this... The bottom line, it's a total new looks and new sounds, especially on the click at the start menu, I kinda like that new sound... Good interface but it has lots of buts...; camera button wasn't bound, so when click on camera button is just like a dummy button...
While I'm typing this, my downgrade process is still working at the background, so I pretty much believe that it gona work as it still does the process, so confidently would want to contribute what I did to downgrade.
1) Sit back relax, don't panick = it doesn't/will never bring to solution. Take a deep breath and always feel with hope
2) All you need is to be able to get the device into bootloader mode, my bootloader version is 1.06, so wouldn't be sure if it works on other version, hopefully yes.
3) During the bootloader mode, dock your xda 2 onto the cradle, and get ready of your previous Rom files, double click on HimaUpgradeUt.exe and just wait for it to start doing the magicX...
I hope I didn't misss any step here, even if I did, please excuse me, coz i'm just a newbie hehe....
Ok hopes of getting back your xda 2 alive is yet to process, just fireaway
ferioz
maniak said:
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
Click to expand...
Click to collapse
go to bootloader b/4 you put your device into cradle
Weeeeeell -
i have no clue why! but I managed to get it running.
I just inserted into the cradle and it worked!
Sometimes you just have to go to bed and try it the next morning
Only thing I did was to pull out the Battery over night... Maybee that did something.
Just for Info:
Bootloader V1.02
ROM : Can't See is just upgrading @ moment.
Btw: The good thing about Wm2005 it is working even if you have no energy anymore... No data will be lost. The Bad thing you lose 128 megs of Ram...
i suggest 2 read this:
http://forum.xda-developers.com/viewtopic.php?t=18122
it discribes how to flash ur phone
Hey guys, ive been reading many threads regarding issues with the sx56, but after going through most of them, it seems ive been left with more questions. Anyway, my problem is , first of all the reception sucks, signals drop every now and then and i hate saying "sorry? ur breaking up" now from what ive learnt so far from most of the posts is that this "signal" issue is due to the radio stack. My siemens sx56 is running:
Windows Mobile Pocket PC 2003
Model No.: PW10B1
ROM version : A.30.09.ENG
ROM date : 01/01/04
Radio Version : A.33.02
Protocol Version : 1.3.3
now, i have been thinking that maybe i should try downgrading the radio stack while still using ppc2003 , but ive seen many posts in which people have bricked their phones due to downgrade.
Another thing is i forgot what was the default radio version before the ppc2003 upgrade (as i think the signal strength was somewhat better prior to this upgrade) So just to be on the safe side, could any of you recommend me which radio stacks i can use? the ones i see on LumpiStefans site are:
RSU Version 3.23
RSU Version 4.16
RSU Version 4.21
RSU Version A20.10
RSU Version 6.24.20
RSU Version 6.25.02
from what i have figured the A20.10 might be the one which was originally installed in the phone when it came with ppc2002 just a guess since there are no other versions above which has an A in the start.But would downgrading kill my phone?
Now the next problem is the volume problem, that INCREASING ring is quite stupid, ive tried disabling the PDA volume and let the phone volume on full, the increasing ring problem goes away but it raises another problem of JUST ONE RING thats it, it just doesnt keep on ringing, just rings once and then goes silent. Do tell me if this is also a radio stack problem or is there any solution for it.
And yeah , finally, is windows mobile 5.0 any good? is it better than the windows mobile pocket pc 2003? and will it work on the sx56? in fact, are there any other OS besides ppc2002-ppc2003 which would work on sx56?
Thanks.
snakey said:
Another thing is i forgot what was the default radio version before the ppc2003 upgrade (as i think the signal strength was somewhat better prior to this upgrade) So just to be on the safe side, could any of you recommend me which radio stacks i can use? the ones i see on LumpiStefans site are:
RSU Version 3.23
RSU Version 4.16
RSU Version 4.21
RSU Version A20.10
RSU Version 6.24.20
RSU Version 6.25.02
from what i have figured the A20.10 might be the one which was originally installed in the phone when it came with ppc2002 just a guess since there are no other versions above which has an A in the start.But would downgrading kill my phone?
Click to expand...
Click to collapse
The A20.10 and the 6.xx Version should work on your phone, cause it's a PW10B-Model....
Flashing of Radio Stack is everytime little bit danderous like all flashing.
If the process doing fine, there should be no problem. I would do removing the sim and doing a hardreset before flashing the radiostack....
snakey said:
Now the next problem is the volume problem, that INCREASING ring is quite stupid, ive tried disabling the PDA volume and let the phone volume on full, the increasing ring problem goes away but it raises another problem of JUST ONE RING thats it, it just doesnt keep on ringing, just rings once and then goes silent. Do tell me if this is also a radio stack problem or is there any solution for it.
Click to expand...
Click to collapse
This is an issue of the A30.0x ROMs. If you're going to use the 4.01.12 then there won't be the increasing sound problem.....
snakey said:
And yeah , finally, is windows mobile 5.0 any good? is it better than the windows mobile pocket pc 2003? and will it work on the sx56? in fact, are there any other OS besides ppc2002-ppc2003 which would work on sx56?
Click to expand...
Click to collapse
There is no WM 5.0 available for the Wallaby devices. Newest, but in my eyes really buggy ROM Version is WM2003 Second Edition....
Only othe rOS running on the Wallaby is Linux, but until now it's not running as complete, as you can use your phone and all the other functions....
Stefan
thank u for the reply stefan! just a few more quick questions:
1. How do i soft/hard reset? iam sorry iam new to pocket pc's.
2. The ROM u mentioned ,4.01.12, does it have any bugs i should be aware of?
3.Which radio stack do you think is better? the 6.xx or A20.10?
4.How do i install the radio stack and the rom? i downloaded the radio stack ZIP file and the rom is being downloaded. The radio stack zip file has no WIN32 executable file. Do i need to copy it over the phone ? how?
5. Should i install the rom first or the radio stack?
Thanks.
1. Softreset is pushing your stylus once in the little hole on the left side at the bottom.
For Hardreset you have to unscrew your stylus and push twice in the very little hole on the right side at the bottom.
2. The 4.01.12 has like all other WM2003 for the Wallaby the problem that under certain circumstands the sd-card will be formatted. I have used WM2003 for about 2 weeks and had this problem once.
3. Don't know which one is better. Never used one of them cause i have a PW10A-Model
4. You have to put the files in one folder on your SX56 and run the exe directly on the device. Pay Attention to have enough power....
5. It depends on you.....
Stefan
ok this is weird... i upgraded my rom to 4.01.12, after the O2 Screen, normal setup procedure comes.. the thing which bothered me was when i clicked on DEVICE INFORMATION..it is now showing model PW10A-MODEL whereas its a PW10B model,says so on the sticker, and the radio stack is still A.33.02 :S
its working though signal problems are still there... i tried the A20.10 and 6.xxx radio stack versions but they dont wanna upgrade , they give messages like "upgrade failed or retry". Should i try other RSU versions like 4.21??
or maybe i need to try that sd-bootloader method? if so, how?
ok you can ignore my previous post about radio stack, i guess i found the solution.
Radio stack upgrade only works if you copy the 4 files of any radio stack archive to the WINDOWS ROOT FOLDER OF YOUR WALLABY DEVICE!
copying to a seprate folder or anywhere else results in 1% hangup or upgrade failed messages. IT ONLY WORKS WHEN YOU COPY THE FILES TO THE WINDOWS ROOT FOLDER OF THE DEVICE . I just upgraded the radio stack to 6.24.00, lets see if it solves my the problem of bad and breaking up signals.
I still havent found out why my wallaby shows PW10A though :roll:
snakey said:
WINDOWS ROOT FOLDER OF YOUR WALLABY DEVICE!
Click to expand...
Click to collapse
Could you specify Windows root folder?
is it \Windows\ or just \ ??????
snakey said:
I still havent found out why my wallaby shows PW10A though :roll:
Click to expand...
Click to collapse
This depends on the ROM used. PW10A is static in the ROM. If you want it, I'm sure I can make a ROM where it's Type is PW10F .....
Stefan
its the \WINDOWS folder.
And the ROM i used was 4.01.12.
By the way, that 6.24.00 RSU kicks butt! havent came across any signal problems at all. Thanks a lot stefan! this forum rules! :lol:
and do let me know about this model version problem, do i need to install any other ROM which will display the correct model version i.e PW10B ??
Got fustrated
I hat the 4.01.16 ROm with 6.02 RSU, I've tryed to upgrade to 6.25.02, copy all files to Windows and the Upgrade to startup, but I kept at 1%, do a reset and after 10 minutes I got an error, now my phone is off, I cannot turned on, in settings I still had version 6.02 of RSU, If I use the Phone icon in Control Panel it says the fhone is off, turn it on and try again and there's the wait icon in the windows.
How can I restore my settings?, perhaps I tryied to updagre with poor storage space, the MS Voice Command eated allmost all RAM and I had to increase it, also I left the SIM while upgrading, any help will be wellcome.
Re: Got fustrated
WhiteWizard said:
I hat the 4.01.16 ROm with 6.02 RSU, I've tryed to upgrade to 6.25.02, copy all files to Windows and the Upgrade to startup, but I kept at 1%, do a reset and after 10 minutes I got an error, now my phone is off, I cannot turned on, in settings I still had version 6.02 of RSU, If I use the Phone icon in Control Panel it says the fhone is off, turn it on and try again and there's the wait icon in the windows.
How can I restore my settings?, perhaps I tryied to updagre with poor storage space, the MS Voice Command eated allmost all RAM and I had to increase it, also I left the SIM while upgrading, any help will be wellcome.
Click to expand...
Click to collapse
please let me know if you find the solution...I have the same problem
Thanks
Yes
Yes, The solution was to put all files on the windows folder and execute the update program from that location, the procedure continues to 100%, and then, I think it reset my machinne, and when it boot again I got the new RSU installed and the phone was able to turn on again, automatically.
Good Luck
Re: Yes
WhiteWizard said:
Yes, The solution was to put all files on the windows folder and execute the update program from that location, the procedure continues to 100%, and then, I think it reset my machinne, and when it boot again I got the new RSU installed and the phone was able to turn on again, automatically.
Good Luck
Click to expand...
Click to collapse
can you tell me whcih version of RSU you used?
I have PW10B1 model and I load the XDA-Developers ROM Version 1.1 but I still have problems with RSU..I tried almost all RSU from ftp://ftp.xda-developers.com/Wallaby/ but no succees...
if you have the same model maybe you can send me by email your RSU version...please!
my email is [email protected]oo.com
I have 6.25.02
I'm using the 6.25.02 version, the very same files that had failed with then 1% problem, the trick was no to put anything in the starup folder, do not soft reset before the procedure.
Simply navigate to your Windows folder with any file explorer and execute the update program. Give it time to finish, ensure that the procedure reach 100%.
Good Luck
Re: I have 6.25.02
WhiteWizard said:
I'm using the 6.25.02 version, the very same files that had failed with then 1% problem, the trick was no to put anything in the starup folder, do not soft reset before the procedure.
Simply navigate to your Windows folder with any file explorer and execute the update program. Give it time to finish, ensure that the procedure reach 100%.
Good Luck
Click to expand...
Click to collapse
I just did this but when I'm starting at 1% the status bar is disappearing and it seems that is doing nothing...is this normal?
Did you had the status bar until 100%?
Perhaps you have a wrong ROM for that RSU
Remember that you must have the rigth ROM for a given RSU, all Win2003 require RSU version 6.x, if you hace downgraded the ROM you'll need an older RSU.
Sorry
Yes, I saw my status bar reach 10%, 20% and so on, ultil it reach 100%
Re: Perhaps you have a wrong ROM for that RSU
WhiteWizard said:
Remember that you must have the rigth ROM for a given RSU, all Win2003 require RSU version 6.x, if you hace downgraded the ROM you'll need an older RSU.
Click to expand...
Click to collapse
here is written tu use for their ROM, XDA-Developers ROM Version 1.1, and PW10B-Model RSU Version 6.24.20 ....but is not working with this also (...
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Hie guys,
I have problem here. after i upgrade my rom from german O2 OS to UK o2 OS. My screen keyboard doesnt shows. Here is the following steps that i did to upgrade:
1. device installed with Germany O2 operating system.
2. upgraded to QTEK 2020 OS, with Croations telecom settings.
3. Upgraded again to UK O2 OS.
after the successful installation, i have no problem with the keyboard. It functions normally. but after i install a few games, dictionary and some add-ons program. The keyboard doesnt appear. i cant write any letter, using keyboard, letter recognizer or block recognizer. Moreover, i cant start any program from the program folder.
Can anyone help me with my problem? What actually happens to my system? is there anything to do with the OS or the program that i have installed on my xda?
Thanks in advanced
have you try to soft reset your device??? if it cant solve the problem, try to hardreset device n install back your applications and games...
I have done it twice. and i encountered the same problem.
can this because of the program, that i have installed on my PPC is not compatible to the ROM that is present?
probably thats the problem...you can try to take a hard reset your device..
if you still encountered the same problem after hard reset, please let me know :lol: :lol:
Hi again!
i have tried hard reset my PPC a few times. and i encountered e same problem. in fact, i have tried to reinstall the windows mobile again. but the problem not seems to be solved...
Now only i figured out, actually the problem occurs, when i took off my battery to change the sim card, or i soft reset the system. Once i got it restarted, it will not start any program, the on screen keyboard and other writings program.
now i am trying to install back to the german rom. is this problem caused by the 1st rom from qtek with croation's settings, that i have installed on my system??
i have this problem.
While trying to flash Charmer_Touch_ver._2.1
i get the following error message
Could not update itsutils.dll to the current version, maybe it is in use? try restarting your device, or restart activesync.
after doing a hard reset the software is still WM5
My current version is the latest ROM from T-mobile UK site
Any advice on this please
copy cert_spcs.cab and enablerapi.cab to your charmer, install them to device memory. Run the upgrade again.
Thanks
Installing these files worked
Another happy customer
after a little bit of cadgouling - i have sorted out my friends charmer
works a treat !
thanx a bunch again
sonix
Hi,
I have a MWG AtomLife running windows mobile v6 i have been trying to install version 6.1 using DSUU.
I get 1 of 2 problems using 2 different version of 6.1 the first problem is
Everything starts off fine, phone softresets but it boots into windows and the DSUU says it failed to connect. No damage to phone.
the seconed problem is it says the country region (or somthing along thoses lines) is wrong and its not compatible with my phone.
I would just like to point out this is MWG not a 02 i got this phone from Portix (the uk disti for MWG) 2 days ago.
Any advice is muchly appricated as i said i have read the wiki, every post i can find on it all the how-tos in the various version but to no avail.
Thanks
FL1X (not fl1c i typod while creating my username how annoyingly rookie of me)
PS> this is the version of 6.1 i was trying to install (using the inbuilt installer and also "pcinstaller1.zip" from another thread) http://forum.xda-developers.com/showthread.php?t=413950 I know it says Exec so i tried this one http://forum.xda-developers.com/showthread.php?t=360664 again to no avail.
Update: just tried http://forum.xda-developers.com/showpost.php?p=2433912&postcount=112 again same problem of the phone softresetting and booting back up loseing connection failing to install.
Hi, if you want to upgrade to WinMo 6.1then you cannot upgrade via DSUU. It is not possible till a DSUU is developed.
For upgrading you would need to use the SD card. Procedure is given in the last link you had visited.
P.S. Do not use ATOM Exec and HP update utilities on Atom Life. You might brick it.
Thanks Maniac, i will look into doing it that way over the weekend, in the event i brick it how can i return it back to the original version of wm6?
'brick it' means ur phone is dead. the term is kind of a metaphor. u can use ur phone as a brick