I upgraded to wm2003se, then lost bluetooth to activesync functionality. xda and pc can find / pair but no sync, no response at all. used to work previous to the upgrade and cradle syncs fine. anyone?
happened to me as well but what i did was uninstalled both the sctivesync and bluetooth software in my laptop. resinstalled a.s. again and created a new sync using the cradle. rebooted my pc and my xda; reinstalled my bt software in the laptop, rebonded and from there bt-sync worked again.
hope that helps
Robson said:
happened to me as well but what i did was uninstalled both the sctivesync and bluetooth software in my laptop. resinstalled a.s. again and created a new sync using the cradle. rebooted my pc and my xda; reinstalled my bt software in the laptop, rebonded and from there bt-sync worked again.
hope that helps
Click to expand...
Click to collapse
HI baboyako
i also face thats problem,,,
Robson i did thats but not works for i use windows xp sp2 so hlep again
ah, the windows xp sp2 thingee again even before i started using bt-activesync i noticed that i could only go as far as bonding the laptop and xda via bt. i noticed that i couldn't get them to sync despite numerous attempts and install-uninstall bouts. i did some reading in the internet and found out that sp2 was not really "compatible" with the software i was trying to use; in this case the bt widcom. i did come across this website and the chap there uninstalled sp2 and downgraded to sp1. so i did the same; i downloaded the sp1 package, uninstalled sp2 on my laptop, reboot, installed sp1, reboot, and went to the process of reinstalling my bt and activesycn software. whew. quiete a chore that one. bt-activesync worked afterwards. when i upgraded to wm2003 se; i had the same problems mentioned by baboyako...which led me to uninstalling and reinstalling my bt and a.s software. lunch time in an hour...could use a beer!
cheers
One thing though: it worked ONCE. I mean, I've been having that bt-activesync sp2 problem but just ONCE, it synced! couldn't get to do it again though...
Related
Hi again!
Ok, my situation is a bit confusing:
I had a cool Toshiba e310 a year ago. It works fine and connecting to my PC using USB was no problem.
Now I have this wonderful XDA and I was banned to connect it to my System to update some stupid things like SMS-Names !! (whatever)
Windows says: "Ah! Nice an USB device.... [I have Active Sync installed] what about searching for nice drivers... Well cannot find one, so... lets deactivate it...." ??
???
ah-ha.. k. I would say: "Nice to have a good and new hot-PNP device." I really like the XDA but XP is everything but intelligent!
How can I fix this problem? Active Sync tries to find the device but says that there was no connected device. Please check calbel.
Ok, I pulled the cable off and... tada: windows-sound-signal
Pushed it back... tada: Windows says device found... but: No active sync. no connection, no data transfer.
Do anyone have a little driver for me? I have ever handbook, every CDROM and ... well you know what within the original package.
with regards
McNugget
Try updating activesync or removing and then reinstalling if you have the latest version.
Also try a soft reset if you haven't already.
HTH
This problem haunts me, I need to soft resent almost every time.
I'll try that!
ActiveSync should detect the device but I will search for a newer version anyways...
I'll report the results later this day
McNugget
My ActiveSync was too old
It works now!!
Thanks!
Had a similar problem, so switched from using front USB port to back one, and it worked.
Still the same problem if i use the front one.
Not a prob though.
Front usb works with everything else aswell, just strikes me as a little strange... :?
Hope some one can help me with this one....
I have wm2005 on a spv m1000 (o2 xds2) running no problems, everything is great, BT, phone, activesync via cradle etc etc
big problem i have is i cannot get my contacts and calendar to sync from outlook (2003 sp1)
i keep getting error coming up, support code 85010014 with a little while exclamation mark in a red circle next to my activesync icon.
I can explore the pda but for some reason cannot sync with it... ?
please help otherwise i'll have to revert back to me 2003se....
Here's another interesting problem. I can sync perfectly in the office, but the device is not recognized at home. I've upgraded to Act Sync 4.0 and Act Sync recognizes the old PDA from my wife (only once, but it will start each time) but it doesn't recognize my WM2005. Looking in network connections using use server-assigned IP address it indicates that it is not connected. However putting the device into the cradle gives a ping on the PC. I've looked into the device manager on the PC looking for the Act Sync dll under hidden devices but couldn't find it. There was some strange sign in there which I took out, but now I get the message that Wbutton.sys is missing (maybe somebody can mail it to me) but I can't imagine that this is the reason why it won't work. I've reinstalled Act Sync a couple of times without succes. So after reading the forums for quite some time now I'm without any clue at this point and I could do with some practical advice :?
WM2005 + Outlook
Heres another for you.
I upgraded to WM2005 and activesync 4 and it would sync everything from outlook 2003 no problem then for no reason it just stopped and displays the 85010014 error. Tried reinstalling activesync removing all traces and even reflashing with a newer version of wm2005 with no luck.
I've just been playing around with exchange server and syncing my phone directly to it over wifi (bypassing pc activesync) and it worked briefly, now it comes up with an error message saying "activesync encountered a problem on the server (with a support code: 0x85010014).
Seems to me that its a problem on the phone rather than activesync on pc.
Anyone have any suggestions?
yoc81
Update !!
reset xda2 back to wm2003 then went back to wm2005 and everything was fine !!!!
really weird that !, never mind, must have been an install error,
BTW :- Buzz's max ram version of wm2005 is excellent !
I have had some weird AS4 probs too, but if I temporarily disable my zonealarm firewall, it works fine every time.
yes disable windows firewall ... solved my problem (wm2005 AS4(via usb))
Same prob. here. At first had a prob. with driver. Had to install ActiveSync 4 before upgrading to WM5. ActiveSync 4 with WM2003SE works just fine. Syncing with upgraded WM5 device is a No-Go.
Am looking into it. Keep you posted!
Any help is welcome. Tim.
d.zee said:
Here's another interesting problem. I can sync perfectly in the office, but the device is not recognized at home. I've upgraded to Act Sync 4.0 and Act Sync recognizes the old PDA from my wife (only once, but it will start each time) but it doesn't recognize my WM2005. Looking in network connections using use server-assigned IP address it indicates that it is not connected. However putting the device into the cradle gives a ping on the PC. I've looked into the device manager on the PC looking for the Act Sync dll under hidden devices but couldn't find it. There was some strange sign in there which I took out, but now I get the message that Wbutton.sys is missing (maybe somebody can mail it to me) but I can't imagine that this is the reason why it won't work. I've reinstalled Act Sync a couple of times without succes. So after reading the forums for quite some time now I'm without any clue at this point and I could do with some practical advice :?
Click to expand...
Click to collapse
Same prob here with Zone Alarm, the connection isn't getting picked up as a new program for some reason so it doesn't ask for permission through the firewall.
Looking forward to a solution!
I can't revert back to WM2003 after flashed WM2K5. The HimaUpgradeUt waited too long, and then showed MODEL ID ERROR.
How can I force it to return to old 2003 version? Thanks
irblinx said:
Same prob here with Zone Alarm, the connection isn't getting picked up as a new program for some reason so it doesn't ask for permission through the firewall.
Looking forward to a solution!
Click to expand...
Click to collapse
Just add the ip address and sub net of your xda into Zone Alarm and it will work fine. Did for me.
I recently upgraded my PDA2k to WM5 along with the new AS4.0 Beta, and recieved the same 85010014 error. I found the resolution through a thread regarding the same error code on the Internet. Typically, I choose "Work Offline" when I start Outlook. The thread directed me to connect directly to my Exchange server for the first sync. Afterwards, I was able to sync while in my typical "Work Offline" mode.
Hope this helps.
I solved my ActiveSync problem with Error 85010014.
I also run Eudora and Incredimail Plugin for Outlook on both PCs, Work and Home. Both are on XP Pro SP2 and when I installed ActiveSync 4.1 on my work PC without issue, I decided to attack my Home PC Outlook installation to see if I could resolve the issue.
So, At home:
Putting Outlook in Offline mode did not solve the problem.
I uninstalled ActiveSync 4.0 and installed ActiveSync 4.1 - No difference.
I backed up Outlook via 3rd party program to grab account settings as well as my 2GB pst file then ran Help->Detect and Repair... - reboot, no difference.
I then ran Control Panel -> Add or remove Programs -> Office 2003 and chose to modify my installation by adding or removing components. I unchecked Outlook and updated it to remove Outlook from my Office 2003 suite. Then returned to this option and re-checked Outlook to add it back to my Office 2003 Suite, CD-Rom in hand but updating, it did not ask for the Office 2003 Install CD-Rom... - Rebooted and connected - Bingo NO 85010014 error!
Ran into a problem. My ActiveSync wouldn't recognize my device. It's showing up within Device Manager but when I connect it no go.
ActiveSync knows something is being connected because it starts to do it's thing but then errors out and cannot establish a connection with my Athena.
Anyone else run into this problem?
I've uninstalled/reinstalled ActiveSync 4.2 AND 4.5. Checked to ensure that the services that ActiveSync depends on are running, etc.
Any help would be greatly appreciated.
ltxda said:
Ran into a problem. My ActiveSync wouldn't recognize my device. It's showing up within Device Manager but when I connect it no go.
ActiveSync knows something is being connected because it starts to do it's thing but then errors out and cannot establish a connection with my Athena.
Anyone else run into this problem?
I've uninstalled/reinstalled ActiveSync 4.2 AND 4.5. Checked to ensure that the services that ActiveSync depends on are running, etc.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
you are not running Windows Vista are you?
No. Running Windows XP Pro.
It was working a bit flakey at first. I had an HTC TyTN synching perfectly on ActiveSync 4.5. When I got my Advantage in, I hooked it up and it acted a bit weird but trying to hurry and get my phone up and running I avoided setting up the relationship so it was a "guest". I installed software onto my Advantage without a problem. Later, once I got my stuff migrated from TyTn to Advantage, I deleted all existing relationships in ActiveSync then tried to join the Advantage to it and it knows the phone is there but won't establish a profile with it. Did a repair on 4.5, didn't work. Uninstalled/reinstalled 4.5, didn't work. Uninstalled 4.5 and installed 4.2 (the version on the CD), didn't work. Researched ActiveSync and noticed that one of the dependent services was stopped...I activated this service, rebooted...didn't work. ActiveSync uses a TCP/IP port to listen on so I did "telnet 127.0.0.1 xxxx" where xxxx is the port and it's there listening, so requests can be accepted.
I'll probably try hard resetting my device this weekend if no one has any recommendations. Once I find the answer I'll post it here.
Possible causes are:
- Corrupt ActiveSync on laptop. An uninstall/reinstall should have resolved this unless the unlerlying OS files that ActiveSync utilizes are corrupt and those weren't repaired/replaced during the reinstall.
- Corrupt ActiveSync on phone. Can't be uninstalled/reinstalled to my knowledge without a hard reset so not much I can do.
- Maybe the GPRS monitor I installed caused a problem. I initially installed the one that came on the CD but had to remove it because it kept locking up the phone and slowing things down significantly.
Are you running BitDefender as your AV/Firewall? A recent update prevents ActiveSync from working correctly. see link:
http://forum.bitdefender.com/index.php?showtopic=109&pid=1044&st=0&#entry1044
soundguy said:
Are you running BitDefender as your AV/Firewall? A recent update prevents ActiveSync from working correctly. see link:
http://forum.bitdefender.com/index.php?showtopic=109&pid=1044&st=0&#entry1044
Click to expand...
Click to collapse
No. Not running either. I did a hard reset and it started working again. Then a few days later the same thing happened again. Not sure exactly what the problem is but since I already did a hard reset and the problem resurfaced, I'm going to have to do some debugging to figure out what the culprit is. Just hate wasting time going through a debug. :-/
Hi,
I am experiencing similar problems with my T-Mobile MDA Compact 3.
I recently re-installed my PC and installed 4.5 having previously used 4.2.
After a few days it stopped syncing. It still allowed you to view files on the phone from the PC and install programs, it just would not Sync.
I did a hard reset of the phone to night and it worked fine to begin with but now it appears to have stopped working again.
Does anyone have any ideas what is wrong. I am assuming that AS 4.5 is the problem here.
Regards
spangelsaregreat said:
Hi,
I am experiencing similar problems with my T-Mobile MDA Compact 3.
I recently re-installed my PC and installed 4.5 having previously used 4.2.
After a few days it stopped syncing. It still allowed you to view files on the phone from the PC and install programs, it just would not Sync.
I did a hard reset of the phone to night and it worked fine to begin with but now it appears to have stopped working again.
Does anyone have any ideas what is wrong. I am assuming that AS 4.5 is the problem here.
Regards
Click to expand...
Click to collapse
That is weird. After my initial hard reset, it happened again. I did another hard reset anyhow because I was trying out new programs and wanted it to be clean again. Not sure what was causing mine to stop functioning but when it did, I couldn't connect to the phone at all. I wouldn't browse nor synch, etc.
It has now definately stopped working.
Looks like I will have to hard reset the MDAC3 again and try from scratch using AS 4.2.
My only concern that without reinstalling my PC there may be some residual problem in the registry or elsewhere that the new installs are picking up.
I am about to try another trawl of the Internet to see if anyone else is experiencing these problems, and has a solution.
Regards
Hi,
....and we are back. I went back to Microsofts site and looked over all the various solutions for AS problems where you are connected but not syncing.
There is a suggestion that USB hubs can cause problems and that you should connect your phone directly to the PCs main USB ports. I had discounted that as it has always been connected to the USB port with no problems.
I have just tried it and it and it is now syncing fine again.
I am assuming that AS 4.2 coped with the hub okay or my reinstall of the PC had caused the problem.
I will now try some soft resets and re-boots of my PC to see if AS keeps working. Fingers crossed!!!
Regards
...and now we are back to square one.
I also tried unistalling Outlook 2007 and reinstalling 2002 and AS 4.2 but it did not even connect.
One thing I have also noticed is when you run the troubleshooter in AS it seems to think that their is not a copy of Outlook as it tells you to install Outlook 2000 or higher. This would explain the lack of syncing while the device appears connected in terms of being to explore it and install programs.
Tried a search on this on the Internet but did not find anything.
Looks like a full reinstall of the PC and a Hard Reset of the device is required.
Deep Joy, thanks Microsoft.
Regards
START ---> Settings ---> Connections Tab ----> USB to PC icon !! have a play with that, it worked for me, when I was having the same problems as you !!
Do you have Clean Notificatons installed or any other program that clears the notifications cache? I may have found one cause of the ActiveSync issue I was experiencing.
Hi,
Well I did the full install of both PC and phone and after one sync it started to play up again. I was about to through both out of the window when I began to realise that there was a slight issue on the phone itself.
I use SBSH Pocket Weather and I noticed that it did not seem to be updating weather and image automatically. I had imported settings from my previous setup. I reinstalled PW and set it up from scratch and hey presto Active Sync is working fine again.
I guess some form of problem must have migrated over in the PW settings.
Either that or it was just blind luck it worked.
Regards
ice_coffee said:
START ---> Settings ---> Connections Tab ----> USB to PC icon !! have a play with that, it worked for me, when I was having the same problems as you !!
Click to expand...
Click to collapse
Confirmed !
Had the same problem and solved it by removing the tag in the above mentioned icon.
Dieter
I also tried the USB to... setting but it didn't resolve my issue.
ice_coffee said:
START ---> Settings ---> Connections Tab ----> USB to PC icon !! have a play with that, it worked for me, when I was having the same problems as you !!
Click to expand...
Click to collapse
Just got my Advantage today! I love it so far, especially the A2DP!
Also had activesync problems: I could synchronise but I could not connect to the internet, only via USB!
Now it is working with AS 4.2 and above box unchecked!
With AS 4.5 -which I also tried- I could not connect to internet with above box checked & unchecked !!!
Cheers,
Ronald
ronald2oo2 said:
Just got my Advantage today! I love it so far, especially the A2DP!
Also had activesync problems: I could synchronise but I could not connect to the internet, only via USB!
Now it is working with AS 4.2 and above box unchecked!
With AS 4.5 -which I also tried- I could not connect to internet with above box checked & unchecked !!!
Cheers,
Ronald
Click to expand...
Click to collapse
Is the USB connection set up as Internet in AS4.5?
A solution may be coming. Sync your data with Vista is still a problem. I installed Windows 7 (beta) and I can sync my Startrek now. It seems that windows 7 is looking for new drivers, which Vista didn't do.
I hope that we can do it with Vista in the future.
Next: I will try to update with win7
That's wierd, I'm using Win7 as well (build 7000) but I can't get it to detect my 3125 for jack.
It didn't work the first time, it did the second time. Win7 started to look for a new driver itself.
eddyve said:
It didn't work the first time, it did the second time. Win7 started to look for a new driver itself.
Click to expand...
Click to collapse
That's weird, mine keeps calling it "Unknown Device" and won't let me look for drivers, even with the OEM CD in the slot. I'll just have to keep using my XP work laptop.
windows update?
im on win7 build 7000 and everything works just fine...
i think u need to be connected to the internet so that windows can download the WMDC and the phone driver...
try doing a windows update while ur phone is plugged in...
may pay to try a different usb port on your machine...
i was having problems like this when i was on vista... switching usb ports made vista detect my phone...
Hi,
Mine syncs with Vista without any trouble. I have a Polaris and a Startrek that I interchange, both just plug in and sync.
M
Just an update, mines is working now. For some reason all I needed to do was reset my laptop with my Trek plugged in. It automatically installed the updated drivers. I'm good now.
Sync
My device syncs with Vista (Outlook 2007) easily on my lap top. But doesnot sync prperly with Vista or XP on in my home system.
If I delete and add new PC in device and sync with home then it doesnot sync with laptop.
There seems to be a problem. It syncs with only with one system
mvsaka said:
My device syncs with Vista (Outlook 2007) easily on my lap top. But does not sync properly with Vista or XP on in my home system.
If I delete and add new PC in device and sync with home then it does not sync with laptop.
There seems to be a problem. It syncs with only with one system
Click to expand...
Click to collapse
I am also having a similar problem. I read that the problem of syncing with two computers was supposed to be fixed in AKU 1.2, which appears to only be available in the ROM by Pampooh (AKU 1.3.6?)
http://forum.xda-developers.com/showthread.php?t=483950
I have not had a chance to try this ROM yet to see if it does fix this problem, but it may be worth looking into. If you are not using Pampooh's ROM and do try it out, please post your results.
I have the same problem.
Hi guys,
I don't usually pair my PC and Aria. The truth is the last time I did was when I was running a stock HTC Sense Rom, and had all the HTC Sync crap installed. Then my win7 laptop picked up the phone no probs and presented me with all the different bluetooth services.
I'd like to pair it again but this time I'm a fresh install of win7 that has never had HTC software installed and the Aria is running CM7 nightly82. When I try to pair it the Win7 system sees the device. Then the Aria prompts me for the password but doesn't appear to pair or doesn't identify the device 100% correctly, and doesn't have the drivers.
Do I have to install the HTC Sync software or is there some other way?
Much thanks
AlbinoAsian said:
Hi guys,
I don't usually pair my PC and Aria. The truth is the last time I did was when I was running a stock HTC Sense Rom, and had all the HTC Sync crap installed. Then my win7 laptop picked up the phone no probs and presented me with all the different bluetooth services.
I'd like to pair it again but this time I'm a fresh install of win7 that has never had HTC software installed and the Aria is running CM7 nightly82. When I try to pair it the Win7 system sees the device. Then the Aria prompts me for the password but doesn't appear to pair or doesn't identify the device 100% correctly, and doesn't have the drivers.
Do I have to install the HTC Sync software or is there some other way?
Much thanks
Click to expand...
Click to collapse
I would suggest installing the HTC Sync software to get the drivers, then try pairing again.