Wifi on and off - MDA, XDA, 1010 General

Zendrui,
I will let you know asap.
Kind regards,
Andre le Fevre on a Qtek9090

For now I didn't find any resource telling me how to turn on/off wifi programmatically

The O2 XDAIIs has a profile changing program built in and it can change the wifi, so it must be possible.

The BA 1.40 rom has a wifi on off switch on tap of wifi icon in top bar.
Can this not be traced to the funtion and or application and added to pzp?
Is there a know application like the radiostart.exe found in the ba section?

Related

special tweak: lock buttons

hello all,
im a frequent to this site, although i dont own a xda.. but i like what you guys accomplished till now ...
now.. my question is: in jeff's kitchen, there is an option "Lock all keys except power button while off " which works for pp2k2 devices.
anyone can tell me how this tweak works? is it a special programm or what?
thanks in advance, banshee
No, it is not a special programm, but you can also set it manualy in your settings of the xda. I think it will only set a Option in the registry...
Regards
Stefan
It's a registry setting. "Funny" thing is that WM2003 stores the setting in the same place in the registry, but somehow resets this registry value to its default when it cold-boots, which is why I made the setting "PPC2002 only".
hmm thats a pitty... i would have liked to enable the same setting on my ipaq...
could you show me where this is located?
im not in the position to create my own roms at the moment - but id still like to try it
As the "Lock Buttons" facility is under MORE on PHONE>OPTIONS in PPC2002 (along with auto-answer) and MORE does not exist under WM2003 (at least not with a 4.00.11/4.21 combination) is it possible to manually add a setting in the registry to activate auto-answer? If so, what? What is the entry for PPC2002? Could we try that?

Registry settings

Does anybody know the registry setting for switrching off the time in the top bar ? I used to be able to do it with Battery pack Pro pwer alert but it will not do it any more
maybe this would help?
http://forum.xda-developers.com/viewtopic.php?t=22393
I tried this but it is not working on WM5
schrub that! I was not entering it correctly sorry
Ok ok I now have another problem. When you remove the time / date it shifts the Gicon and the wireless icon to the right. It moves them so much only half the wirless levle icon is showing. I have search through the WIKI on registry hacks but I cannot find the hack for the position of these icons.

Sub/Status display on WM6 - is it working at all??

Hey all
I have here my Ameo upgradet to WM6 Dopod U1000 ROM and unlocked but I can't get the Subdiplay to show. I tried putting the keyboard all the sides toward the screen but nothing changes. Does the WM6 at all support the subdiplay function or is the problem only in my device?
mobiles said:
Hey all
I have here my Ameo upgradet to WM6 Dopod U1000 ROM and unlocked but I can't get the Subdiplay to show. I tried putting the keyboard all the sides toward the screen but nothing changes. Does the WM6 at all support the subdiplay function or is the problem only in my device?
Click to expand...
Click to collapse
I am using the WM6 upgrade found here (not the Dopod one) and have no problems with the Subdisplay on my X7500 maybe it's related to the Dopod Upgrade?????
mobiles said:
Hey all
I have here my Ameo upgradet to WM6 Dopod U1000 ROM and unlocked but I can't get the Subdiplay to show. I tried putting the keyboard all the sides toward the screen but nothing changes. Does the WM6 at all support the subdiplay function or is the problem only in my device?
Click to expand...
Click to collapse
Bringing it out by putting magnet around front camera. It works for me.
I am using the only one WM6 update available here and tried all the positions of the keyboard but nothing changes. Through the transperent part of the keyboard I see the two soft buttons Contacts and Calendar. Does the Subdiplay just activates when the keyboard is put on the screen or schould be started otherway?
Now I noticed that whatever application is started when I put the keyboard on the screen it just returns to Today but it doesn't appear any sub or status display. So I think it recognizes that the keyboard is brought on but its something wrong with starting the subdisplay. Could it be just disabled or its not available on T-mobile Ameo? Any suggestions?
mobiles said:
Now I noticed that whatever application is started when I put the keyboard on the screen it just returns to Today but it doesn't appear any sub or status display. So I think it recognizes that the keyboard is brought on but its something wrong with starting the subdisplay. Could it be just disabled or its not available on T-mobile Ameo? Any suggestions?
Click to expand...
Click to collapse
Goto HKLM\Software\HTC\SubDisplay. It should show "Open=0x1 (1)".
Also goto HKLM\Software\HTC\SecondaryDsp. You can do some tweaking there. I've been able to change and apply the TopMargin by setting it to 60.
Wow. Thanks mate. I changed it to 60 and now it shows up. I can swith between the clock, operator and a Home adn Visiting clock. What is this Visiting clock and how can I change it?
mobiles said:
Wow. Thanks mate. I changed it to 60 and now it shows up. I can swith between the clock, operator and a Home adn Visiting clock. What is this Visiting clock and how can I change it?
Click to expand...
Click to collapse
Just goto to Settings>System>Clock&Alarms>Time.
does anyone know how to change the color of the text on the right and side of the subdisplay. thanks
Is there a registry setting to force the subdisplay to 'on'?
If I even nudge my keyboard the subdisplay turns off, quite annoying!
Funny thing, I changed the
HKLM\Software\HTC\SubDisplay. It should show "Open=0x1 (1)
value to '0' and that puts on the display without the keyboard attached.
But when you attach the keyboard, the subdisplay 'may' go away, and then it just doesn't come back.
There has to be a registry value that would turn off the magnetic keyboard sensing switch to force the subdisplay into one mode or the other. Anyone have a guess to where that registry is?
irus said:
does anyone know how to change the color of the text on the right and side of the subdisplay. thanks
Click to expand...
Click to collapse
To change the text color just goto HKLM\Software\HTC\SecondaryDsp\TextColor. What I don't know is the color code list (FFFFFF certainly stands for white).
keithwwalker said:
Is there a registry setting to force the subdisplay to 'on'?
If I even nudge my keyboard the subdisplay turns off, quite annoying!
Funny thing, I changed the
HKLM\Software\HTC\SubDisplay. It should show "Open=0x1 (1)
value to '0' and that puts on the display without the keyboard attached.
But when you attach the keyboard, the subdisplay 'may' go away, and then it just doesn't come back.
There has to be a registry value that would turn off the magnetic keyboard sensing switch to force the subdisplay into one mode or the other. Anyone have a guess to where that registry is?
Click to expand...
Click to collapse
I've searched that registry without any success.
I attach a small & thin magnet inside my case as a replacement for the keyboard.

A small problem with recent WM6.1 ROMs

Yes, I found a small problem: the Beam button in Comm seems not to work properly. Is there any1 get this?
HeroHP said:
Yes, I found a small problem: the Beam button in Comm seems not to work properly. Is there any1 get this?
Click to expand...
Click to collapse
Can you explain please? What is it that isn't functioning?
which rom?
I've tried various 6.1 ROMs (about 6 or 7 recent ROMs includes 203, 701, 212, 213 etc. of various authors like Cloudyfa, Lamson-PV, l3v5y) and found the same problem. My case is that the Beam button in Commanager doesn't work properly. When I press that button in Comm, it clearly turns into On position but if check its status in Start/Settings/Connections/Beam at once, the real position is Off (the item "Receive all incoming beams" is not checked). The same problem found when turning from On to Off. Any1 get that?
I never use this feature, so I didn't notice before but you are right. The beam setting is not responding to changes made in the Comm Manager.
My experience
Let me share my experience with Cloudyfa's ROM S4V.19701.01 fixed? by vv.
First I opened Comm manager screen and I turned ON BEAM (or I checked it was on, I couldn't tell you). Then I opened Start/Settings/Connections/Beam and the item "Receive all incoming beams" was checked. Then I unchecked it and I went back to Comm manager screen and it was still turned ON
So I did some tests, and the results are these:
Being Beam in Comm manager screen turned off, when I changed the value for the position to the item "Receive all incoming beams" from
Start/Settings/Connections/Beam (what it is from checked to unchecked or viceversa), in Comm manager screen beam turned on
Meanwhile the change of value (on/off) Beam in Comm manager screen didn't change anything to the item "Receive all incoming beams".
Only when the item "Receive all incoming beams" was checked I was able to receive an mp3 file by IRDA.
Consequently, beam comm manager selector is useless.
So, cooks of the world is up to you to find the solution
myer said:
.....
Consequently, beam comm manager selector is useless.
So, cooks of the world is up to you to find the solution
Click to expand...
Click to collapse
I guess you are right!
So... I'm not alone in the dark with this tiny problem Any cook care about this 4 us, thx alot ...
guys, these 2 settings are separate.
1. comm manager Beam option En/Disable receiving of files over BlueTooth/IrDA according to following registry key:
HKLM\Software\Microsoft\Obex\IsEnabled, 0 for disabled, 1 for enabled.
2. start>settings>connections>beam setting changes the following key:
HKLM\Software\Microsoft\Obex\ObexServiceMask, whose value is 2 by default i.e. unchecked option and if u check the box, its value changes to 3.
i hope the things r clear now
htctouchp said:
guys, these 2 settings are separate.
1. comm manager Beam option En/Disable receiving of files over BlueTooth/IrDA according to following registry key:
HKLM\Software\Microsoft\Obex\IsEnabled, 0 for disabled, 1 for enabled.
2. start>settings>connections>beam setting changes the following key:
HKLM\Software\Microsoft\Obex\ObexServiceMask, whose value is 2 by default i.e. unchecked option and if u check the box, its value changes to 3.
i hope the things r clear now
Click to expand...
Click to collapse
Thanks for explaining, I'm glad it makes sense afterall. But just curious, what is the difference between the two?
rondol1 said:
Thanks for explaining, I'm glad it makes sense afterall. But just curious, what is the difference between the two?
Click to expand...
Click to collapse
it doesnt make much sense to me (at least not yet) that why there are 2 settings for the same purpose (at least it looks like same to all of us). i'll try to figure it out from somewhere and let u know asap
htctouchp said:
it doesnt make much sense to me (at least not yet) that why there are 2 settings for the same purpose (at least it looks like same to all of us). i'll try to figure it out from somewhere and let u know asap
Click to expand...
Click to collapse
The two different settings don't make sense to me either, but at least we know why they don't synchronize... that makes sense! We will try to figure out why the two setting. To be continued.....
I'm sorry but it doesn't make sense to me, because the change of value in settings CHANGES the value in Comm Manager Screen.
And the comm manager screen is still useless unless the beam from settings is checked.
I am a little stubborn I know but I promise trying to understand it.
Besides I am a little slow writer and I began to write before the two previous posts.
myer said:
I'm sorry but it doesn't make sense to me, because the change of value in settings CHANGES the value in Comm Manager Screen.
And the comm manager screen is still useless unless the beam from settings is checked.
I am a little stubborn I know but I promise trying to understand it.
Besides I am a little slow writer and I began to write before the two previous posts.
Click to expand...
Click to collapse
I think the checkbox in Settings turns on/off the main layer of the service (OBEX?). The Comm Manager just switches on/off protocols that are using this service. I think it should be more understandable if the Comm Manager was to mention "IRDA" instead of "BEAM" . Afterall it names "Bluetooth" separate too!
rondol1 said:
I think the checkbox in Settings turns on/off the main layer of the service (OBEX?). The Comm Manager just switches on/off protocols that are using this service. I think it should be more understandable if the Comm Manager was to mention "IRDA" instead of "BEAM" . Afterall it names "Bluetooth" separate too!
Click to expand...
Click to collapse
i think the IsEnabled registry value (beam in comm manager) controls the main service of OBEX (object exchange). so, if its value is 0, the main service will not start at all and we will not be able to use other bluetooth facilities (like headphones etc, but i'm not sure as i've not tested it, pls someone test ). "accept all incoming beams" setting is just for file transfer, for sure. so if u enable this option in control panel, this will automatically make the OBEX service enabled because accepting incoming beams is useless unless the main service is running. but the reverse is not true, if u uncheck the 'incoming beams' option, it will not stop the main OBEX service from running.
I buy it.
But, anyway, what is quite absurd is that uncheking receiving beam in settings, TURNS ON beam in Comm Manager.
OK. Thank You!!!
Thanks for all of you
Now I can understand these two beam setting.
1) start->settings->beam in this I just Keep Check "Receive All..." it.
2) So, I can use Beam Button to turn On/Off File Transfer Service.
if I turn Beam in Comm manager Off, I can't receive file from other.
But if I turn it on then I can receive file from any other who send it to me.
Everything is clear now for me
Thanks for your information, I was annoy this setting for a long time
Dopod810

Toggle to Vibrate cab? ...via Comm Mgr Button

Hi,
I'm new to the Titan coming from Hermes....there was a great cab i always installed for the Hermes that sets up the comm button as a toggle between ring and vibrate when you hold it in, so it keeps the button active for it's normal use as comm mgr (or whatever u assign it to). I found this, but looks like you need to assign the button to it:
Ring Toggle Vibrate Switch
Is there anything like that for Titan? The cab for Hermes didn't work on the Titan and I couldn't find anything when searching. If not, how are you all toggling to vibrate?
Hermes Toggle Cab Thread
just use hbutton
thanks...but is that an app or button on my phone?
search for hbutton
nonegiven said:
search for hbutton
Click to expand...
Click to collapse
Here ya go.
thank you!
wasn't showing up when i searched the forums
It is simply stunning to me the large amount of variation HTC puts into their devices...
Since you were looking for this feature it explains why I was having trouble getting the same functionality on my new Titan. I came from the Wizard where this functionality is supported out of the box on the stock HTC roms...
Why would they drop that feature is beyond me...
Seems crazy to add and remove features across models at random. Such small ones like this?

Categories

Resources