Archiving original ROMs - MDA II, XDA II, 2060 ROM Development

Hi all,
I've just upgraded my XDA II courtesy to the great work of people here - thanks guys! Landscape mode, blisss...
I want to backup/archive my original device ROMs just in case anything disasterous happens and I need to revert to them. Is there a way to copy them from the SD card that I backed them up onto to a CD or even just to PC?
Many thanks,
Jessica

-=bump=-

Related

Help me unlock this XDA

Guys- I took my phone to be unlocked from a wee shop in Edinburgh and they failed, leaving the XDA useless. I beleive the software version i had on it prevented unlocking. (i had downloaded upgraded software and radio pack off the 02 website about 2 months ago)
Do any of you know what I can do- I need to get it up and working again and then put a vodofone sim card in it..
many thanks in advance from a frustrated scotsman..
Can you explain what you mean by "leaving the xda useless"?
Hi- it wouldn't boot up, however since my first messagem the operating system is back! It still leaves the problem of how to unlock it...Any ideas
Thanks -Stew
Which radio stack are you using?
You can try downloading xdaunlock.exe, copy it your xda, this file has to be dragged/dropped to xda or cut/pasted to xda, do NOT execute the file on the pc, it needs executing on xda, just explore your xda to the place you copied the file to and double tap. The other option is to use a serial cable and download the xda manipulator program and run that on your pc with your xda in bootloader mode while connected by serial cable. The other option is to download the developers rom 1.2, that will unlock your phone automatically. You would be advised to backup your existing rom to sd card then you can go back to that if you decide not to keep the 1.2 rom. The sd backup will also come in handy if you cook a rom in the kitchen and decide you dont want it, I keep a 64 meg sd card for just that purpose.
I also suggest you have a good look around the forum and become aware of problems that may arise and solutions that may be available, there is a mine of information here thanks to the guys that run the forum and their dedication to the task.
Thank you for taking the time to reply
How do I find out which radio stack i am using?
Re the radio stack-I downloaded an upgraded version from the 02 website a few months ago if that gives you a clue..
thanks again
Stew
Go to start/settings/system/device information.
Cheers- as you can tell I am not as technically gifted as some of you guys but I learn quick.
Will check out what version it is when I get home and let you know.
Stew

XDA I - OSImageTool Version 1

Tried to make a copy of my ROM to SD Card. Dialog Box shows it copying but after completing in 6mins or so nothing shows on the card. I want to back up prior to copying XDA ROM and unlocking. Any advice would be appreciated.
well
you dont really need to save it on your sd card. You can just back it up in a file on your pc. click the browse button beside the combo box(ie the button with 3 dots) and select a name and a path. it would transfer the os to your pc and u can keep the back up there where its safer. :wink:
Thanks for your reply. Unfortunately I've already tried that and I just get an error message - Unsupported target filetype - don't know how to write destinationfile c:\Program Files\etc...
well
okay this is what you'll do :: put this line in the destination "c:\rom\os.nb1"; for the source select the combo box then select from device and it should work. if it doesnt then reply me asap. :roll:
Thanks again but unfortunately entering c:\rom\os.nb1 in the destination dialog didn't work. It returned: error opening c:\rom\os.nb1 for writing. The system cannot find the path specified. error opening target device.
Well
PS. Should also add I didn't quite understand your reference to "for the source select the combo box then select from device and it should work. if it doesnt then reply me asap
Well
PS. Should also add I didn't quite understand your reference to "for the source select the combo box then select from device and it should work. if it doesnt then reply me asap
check the image i just sent u. ull see what i asked you to click for the source.(Device Memory (current rom))
then for the destination clikc the 3 dots on its side and type in a name eg os.nb1 and lcick open. :!: :?:
Cool
Thanks, man. It looks like that's done the trick. It's currently copying. Once that's done I believe I need to load the XDA ROM to facilitate the unlock. Many thanks for your help.
David
no probs men. but i need to unlock some 2 more phones an am having a hell of a time. my bros samsung e700 and my dads hp6315. do u by any chance know how i can get that done
I wish I could reciprocate but unfortunately I don't know much about my Wallaby let alone those you've mentioned. I've just downloaded the XDA ROM and my device is not accepting it. Reading stuff on the forum to try to figure out what the problem is. Don't want to take away from your other problems with the Samsung and HP but let me know if you've heard of any problems as to why a device won't accept the XDA ROM. I'm probably doing something wrong.
Cheers for now.
okay i see you really do not know much. now all you have to do is get the special edition rom u get. then use the same program u used to backup your rom to upload the new one. i really want you to be 100% sure you have a back up. then duplicate the back up for safety reasons. Then extract the speacial edition rom. if its just the rom u got the use the program to do it. if its the whole installation u got a progamm called PROGRAMME A should open and it will guide you throught. Then i hope your phone is a wallaby/qtek 1010/ o2 xda/tmobile MDA they are all the same. else your better stop now. then why dont you lets chat i think it had be easier. yahoo ::nowoxi or msn ::[email protected]
Unfortunately, I haven't IM loaded currently. However, what you told me is a big help. I do have the MDA version of the phone so I'll try that when I get back as I have to leave right now. Thanks again and I'll keep you posted as to how it works out.
Hi nowoxi,
got a problem with OSImageTool, I did my own ROM copy but now how can I upload it to my device in case of need(mine is 2020..)? Do I need a SD card or I can do it directly from the xda image program? Many thanks
P.S. if you find a Yahoo mess request,well...it's me!
Didnt really get your compostition. I dont know where to start from or what to think. I know you have a problem and i know its with the ostool but i really dont get (understand) what your problem is. The rom u said u have. is it one you cooked up or the one on your phone before. then wher edo u wanna send stuff to. your phone or you wanna backup the one on your phone :?:
Sorry for the confusion, here's the story.
I'm the owner of an Orange SPV m1000, I received it last week and don't know much about PocketPC....my device is an English version, I'd like to convert it to an Italian one. I found an ITA ROM (it's for Qtek 2020 but it should work..) and soon I'd like to try to flash it. In case of need (maybe something wrong in the flashing...) I'd like to keep a copy of the original ROM installed in my device so I used XDAtools to get one, as you explained in this thread. Now I have this .nb1 file in my pc and the question is: can I upload it from my pc directly in case something goes wrong during the upgrade flashing? Or should I copy the .nb1 file to the SD card first and then try to flash from it ( but in what way?) ? Hope to made it clear now, thanks to your help!
P.S. Still looking the forum for a guide on using the imagetool....please be patient :wink:
Well you can restore it directly from your pc. just follow the steps in the thread. for source instead of selecting something in the combo box. click the 3 dots at the side then use your phone as destination. i hope that helps you out.
Sure thing!
Just one more question: what happen after I have finished upload the .bf1 file to my device with imagetools? It's a kind of autostart procedure or do I have to make some move? Thanks again, bye from Italy
nowoxi
I'm back and about to try to load the XDA ROM based on your instructions. However, question: do I have to removed the existing ROM from my device or will the XDA ROM simply overwrite it?
Hope you're around this Sunday evening/Monday morning!
Cheers
The rom will be overwritten.

[q] froyo 2.2 wont recognize new folders on sd card!

hello all!
so, i finally have my htc hd2 up and running on froyo 2.2, after a slight mishap with bricking..anywho..
i've been trying to add music and comics to my sd card. the folders copy with no problem, but when i go to select the folder, whether in the program or file explorer, they arent there!! anything else that was originally on my memory card is though.
so..i switch to windows mobile, and lo and behold, the folders i just added are there!!
has anyone else experienced this?
im not a tech genius or anything, so it may be that im doing something wrong thats so obvious..
please, PLEASE help!
is it so wrong to want to listen to awesome music and read my comics =[
*****ALSO, CAN A THREAD BE DELETED?..I POSTED THIS QUESTION UNDER THE WRONG CATEGORY..DONT WANNA GET KNOCKED OFF FOR DOUBLE POSTING....*****

[Q] Remote Control Not working after Rooting for ICS Upgrade

Hi everybody.
Many years since I have been on XDA Developers. I recently got given a Sony Tablet S and, in my search for info, ended up here. Great tosee the forum is still great and very useful.
I am from the UK and rooted my tablet yesterday (using methods and SW found here) in order to upgrade to ICS. All went smoothly but I have noticed that I am unable to use the infra red functions on my Toshiba TV and Sky Satellite box after rooting and upgrading. They worked fine before.
Would this be anything to do with changing region?
My world will not end as a result of no longer being able to control my TV and satellite with my tablet. Just curious as to why.
Anyone with explanations or a possible fix, I would appreciate some advice.
Also - and this may just be me - I noticed that if you plug a USB device in or insert the SD card, it creates a folder in the Storage directory which is empty but cannot be deleted. So I currently have sdcard, sdcard1 and sdcard2 and usbdisk1 - usbdisk8. Is there any way to remove these as when I try to delete using File Manager HD, it says no.
Thanks in advance for your help.
tonylee2000 said:
Hi everybody.
Many years since I have been on XDA Developers. I recently got given a Sony Tablet S and, in my search for info, ended up here. Great tosee the forum is still great and very useful.
I am from the UK and rooted my tablet yesterday (using methods and SW found here) in order to upgrade to ICS. All went smoothly but I have noticed that I am unable to use the infra red functions on my Toshiba TV and Sky Satellite box after rooting and upgrading. They worked fine before.
Would this be anything to do with changing region?
My world will not end as a result of no longer being able to control my TV and satellite with my tablet. Just curious as to why.
Anyone with explanations or a possible fix, I would appreciate some advice.
Also - and this may just be me - I noticed that if you plug a USB device in or insert the SD card, it creates a folder in the Storage directory which is empty but cannot be deleted. So I currently have sdcard, sdcard1 and sdcard2 and usbdisk1 - usbdisk8. Is there any way to remove these as when I try to delete using File Manager HD, it says no.
Thanks in advance for your help.
Click to expand...
Click to collapse
I cant give u answer on all but it have two things
First : i hope u did not do a gegion chance while running ics i hope. Strangely enough i thought device should brick but idunno if its supported already
Second : there should be an option to accept root browsing and changing try "Root Explorer" the blue app you can change things if you want. Dont know how much you can adjust change delete etc. Didnt tryed all ofcourse and i think your regular internal sd can not be changed. Permissions for example.
Mahaco said:
I cant give u answer on all but it have two things
First : i hope u did not do a gegion chance while running ics i hope. Strangely enough i thought device should brick but idunno if its supported already
Click to expand...
Click to collapse
I'm changing my device region all the time, now I've got sony tablet P region lol
About thread/problem name 'Remote Control Not working after Rooting for ICS Upgrade' - what root has to do with remote control?
If you don't want to have it, then you can reflash your device with stock ICS zip without any mod, root etc. Remember that its 'one-way-ticket'.
Maybe tomorrow I will check xda forum, and will find a thread about 'I used AiO tool, my leg does not bend to the end'.
OK so, the point is that most probably its an ICS issue.
I've got not-US region device, got ICS on it,
and remote control works just fine!
Start with wiping device, then check, then if its not good for you,
then you can still downgrade your device, back to 3.2.1.
(more info about downgrade in AiO thread - FAQ section).
br
condi
Maybe tomorrow I will check xda forum, and will find a thread about 'I used AiO tool, my leg does not bend to the end'.
HAHAHAHA lol xD
Thanks for the advice people.
Condi, thanks for taking the time to read and advise - It was your tool I used to root my tablet in the first place so that I could upgrade to ICS.
I think the point of my post may have got lost in translation a little. All I was saying was that before rooting and upgrading, I/R remote was working on my TV and Satellite receiver and after rooting and upgrading, it no longer does.
I just wondered whether the connection was known or obvious. I presume once Sony officially launch ICS in the UK, we will know!
Thx again

[Q] SG3 Assistance

Well I have come to this. I have been enjoying this thread for some time, and wow, great people all around. I have a Sprint unrooted 16GB SG3. Ever since I discovered the art of modifying my phone it has been non-stop. First problem is that my SG3 is not processing files I download to my phone. I do it all directly on the phone using mostly androzip. No I do not download to my PC and then transfer. That is the next problem. My phones memory is down to 3.5 GB and my SD card is mostly empty. Tried to connect phone to PC and try to transfer files to SD card but for some reason after I installed the necessary programs it does not work. All download through play store and APK's are working fine. I can see the files I download on my phone storage>downloads but when I ask to open it, androzip will open but not process file. I am missing out on so many beautiful UCCW skins, icons and others that I am planning to reset my phone to factory setting if I don't learn how to transfer all this to my SD card.
Thanks in advance to anybody that is willing to help or point me in the right direction.

Categories

Resources