Hi there! I have an MDA II and a Parrot CK-3000 (with sw ver. 3.13) carkit. I read about the outcoming of this sw and I decided to install it on my MDAII. But, after a correct installing procedure, it simply doesn't work: my carkit remains mute like a fish!!! :shock: I'm asking you, guys already use successfully this sw, a hand of help to solve my trouble (if possible). Note that I downloaded it from this
http://bluetooth.i-networx.de/index_e.html
and I tried to follow all the instructions placed in there...
Thank you all!
pap
paperuccio said:
Hi there! I have an MDA II and a Parrot CK-3000 (with sw ver. 3.13) carkit. I read about the outcoming of this sw and I decided to install it on my MDAII. But, after a correct installing procedure, it simply doesn't work: my carkit remains mute like a fish!!! :shock: I'm asking you, guys already use successfully this sw, a hand of help to solve my trouble (if possible). Note that I downloaded it from this
http://bluetooth.i-networx.de/index_e.html
and I tried to follow all the instructions placed in there...
Thank you all!
pap
Click to expand...
Click to collapse
Why not email the author, he is most helpful.
Had the same issue with the Parrot. My Plantronics headset works a treat, but not the Parrot.
I mailed the author who confirmed there are some problems and a new release will be needed.
As the author is doing this work unpaid and the functionality is so good, I can wait.
@ mrg2003
I send an e-mail some days ago but still had no response.
Anyway, I agree with IanF and I'll wait for the new release.
I wish I read this bulletin board more often.
Yes, I have exactly the same problem with the CK3000 (v3.13) and PBT. HBH-35 works a treat but CK3000 does not bond (XDA thinks it does but there is no handshaking and CK3000 repeats request to bond).
Back to basics again ...
Incidentally, does anyone know if Tobias plans to engineer a way to trigger Voice Command and take input from the car microphone for voice recognition? Would be the dogs and well worth a major donation ....
Cheers
I've had some problems with pocket bluetooth. I have emailed tobias as follows and am awaiting a reply. Was wondering if anyone has faced similar problems:
Tobias,
Thanks for all the hard work in getting these tools working. I have just bought an XDAII with the latest 1.60.00 ROM using the 1.10.00 radio version.
At the same time, I have a WIDCOMM bluetooth dongle on my PC which supports numerous profiles including the headset profile, which allows me to use the PC's speakers and mic as a 'headset' with the XDAII.
I set up the XDAII with the PC, using the built-in bluetooth bonding and pairing application and managed to get it all working fine with the PC using the speakers and the mic as the headset, with the phone automatically transferring the call to the PC when the 'Bluetooth Headset mode is enabled' shows on the today screen. Furthermore, activesync also seems to work fine too.
After installing Pocket Bluetooth Tools, the headset stops working. Before installing it, I unpaired the device by deleting it from the list of paired devices. After installation and going through the process of pairing the device again, it correctly gives me the option to choose the Serial Port, ActiveSync, Modem, and Headset profile. I select all of these and click on OK. Once this happens, my PC gives me a message saying that the XDAII has connected with the headset. However, this doesn’t happen once but goes into a continuous loop giving me notifications every 2-3 seconds that this is the case. Furthermore, when making a call to see if the voice has been transferred to the PC< this stops working and the XDAII's speaker and mic continue to be used. The only way to stop the constant loop of connections is to switch off the bluetooth radio on the XDAII. Furthermore, when deleting the pairing from the XDAII this constant loop continues.
Have you faced this issue previously, as I think it may be a bug. The only reason I installed pocket Bluetooth is that my current b.tooth headset is a Nokia HDW-30 that supports the handsfree profile and your documentation states that Pocket Bluetooth tools supports this profile.
Let me know if there is a fix for this.
pap[/quote]
Why not email the author, he is most helpful.[/quote]
maybe just because he doesn't answer
i wrote a very long report some days after the long awaited new version came out in april, but haven't got any reply. (maybe my email got lost - who knows ...)
i have exactly the same problems. i also have a parrot ck3000 (tried with firmware 3.11 and 3.13) and an mda2 with rom 1.6.00GER and extROM 1.60.07. the two devices pair, and sometime i can even select the "headphone profile" afterwards. i even managed to make it work ONCE, after several hours, of installing, reinstalling, pairing, reparing, ect, ect ...
what did work once was making calls. but after the first call came in, i could answer it, the caller could hear me, but i couldn't hear anything. this happened twice and then i just turned off bt and used the mobile as always.
as i'm using my mda in my car for work and not for fun this is no solution for me . i went back to the original bt stack that works quite well. i can make and take calls w/o any problems.
one thing i'd like to see changed (as soon as parrot and mda work together) is, that ALL calls are made via the handsfree, as, as long i'm in the car it HAVE TO use the handsfree by law (and it's much more comfortable anyway). it's not practicle to dial with the mobile, and then by pressing the green button on the parrot to move the call to the handsfree. but that's the only way you can do it when using speeddial.
another thing i desperately miss is a way to change the volume of the handsfree. i could do this using the volume slider of my nokia 6310, but volume stays all the same when using the mda. and it's just too low when doing higher speeds on the autobahn
of course voice dialing would be a great feature to have ... but it's not that necessary.
please don't get me wrong .. i'm don't want to be ungrateful as i'm not paying for this software - i just want to help ppl by saying that they are not alone with their problem and they should give up wasting their time and better wait for a new release....
and of course i'm very willing to PAY for that software as well as soon as it is any improvement over the original bt stack (for me of course. for most of you it already is)
maybe TOWA could say some words here. that would be really appreciated.
thanks anyway a lot to all ppl that spend their free time developing software and providing it to the comunity!!! thumbs up !
regards ize|man
Bluetooth tools and ROM 1.72
Does ROM version 1.72 require TOWA's bluetooth tools? In this ROM, there are options for COM port selection etc under Bluetooth settings and the clubimate site mentions bluetooth improvements. Anyone with this info?
other com settings then
Inbound COM port com4
outbound COM port com5
??
if so what are they?
Rudegar
You are right. Inbound 4, outbound 5. Likely required for GPS devices, if i am not mistaken
faisal said:
Rudegar
You are right. Inbound 4, outbound 5. Likely required for GPS devices, if i am not mistaken
Click to expand...
Click to collapse
These are the ports for BT beaming, as I understand! (not for BT GPS).
For BT GPS you do not specifically need BTHTools anymore (since 1.66) because WM can install a BT GPS com at first bonding.
Something is different however (vs BTHTools) since with 1 application (Alturion) I can not get the BT GPS working anymore, which can also not be solved by still installing BTHTools!! (while I have no problems with my other application TT. Figure that out?!)
Ronald
I now have the same problem, the parrot ck3000 was working until I insatlle dthe bluetooth tools, and now it doesn't.
Its a shame I did not see this thread before
Will the 1.72 rom work with both parrot and my emtac bluetooth gps?
Cheers
Justinp
justinp
have you tried uninstalling Bluetoothtools?
no not yet, I might give that a go, but then my gps wont work :?
justinp said:
no not yet, I might give that a go, but then my gps wont work :?
Click to expand...
Click to collapse
I think it will still work!
With my working application (TT3) I see the GPS on COM5 (installed by WM) + on COM7 (installed by BTHTools) + on the BT/SIRF interface!
If I uninstall BTHTools I only loose the selection for COM7. The other two selections still work!
Of course you must have acknowledged the WM com installation with first bonding (in any case for the serial operation)! My BT/SIRF connection always works in TT3 regardless of WM/BTHTools installation of serial ports.
Ronald
I'm also having that strange problem with the parrot CK3000. I did install the previous version of BT but I don't see any difference with or without BT. But when I de-install and want to go back to the original state, the same problem persist. Is there any way to download anyware the original Bluetooth stack without re-install everything (and loosing all my settings and software)?
Thanks for helping out.
Frank.
Hi guys,
I've been using the 1.72 ROM for a couple of weeks now and I must say it is the most stable ROM since I've my MDA II. The radio on/off works like a charm and so does the bluetooth. But.....
I use TomTom Navigator 3 with an Emtac bluetooth GPS. It works fine with this ROM but I can't use TomTom anymore without the Emtac bluetooth GPS. What I mean is: Before this ROM I would sometimes open up TomTom to look something up on the map. This would be with bluetooth turned off and my GPS would be somewere else. Now with this 1.72 ROM and the Bluetooth Tools in it, I can't do this anymore. My MDA II will slow down in opening TomTom and will then freeze. It needs a soft reset to get out of this stage. This is very repeatable. I think it has to do with the bluetooth tools in the ROM.
So my questions are:
1. Does any of you guys have the same problem with a bluetooth GPS?
2. Can I do a hard reset and not let this bluetooth tools be installed and still get my bluetooth GPS working?
I hope any of you knows the answer to this (minor) problem.
Thanks!
Wouter
are you using the latest version of the tomtom gps driver, I had this problem on my old IPAQ 3970. but everything works fine on my XDA with 1.72 and bluetooth tools
I use the very, very latest GPS driver. So you can't reproduce that problem with a bluetooth gps mouse?
Wouter
I have a GlobalSat GPS mouse and it works fine.
Jon
I also have the latest GPS driver with the TomTom Wireless (Bluetooth) GPS mouse and works without any problem
Hi Xzanix,
Just to be sure if I just have bad luck. You can open the map in TomTom and look something up without the bluetooth GPS turned on? (I just want to be sure....)
Thanks,
Wouter
:lol: :lol: :lol:
Hi guys,
This thread can be closed. I solved the problem!
I tell you what I did. I had in the GPS settings choosen for COM5 because I had that one activated in the Bluetooth Tools. This was how TT did work but didn't work with no GPS turned on.
Now I turned Bluetooth Tools off and choose for Bluetooth GPS in the GPS settings. Now it works how it is supposed and I can still look something up on the map without my bluetooth GPS turned on.
I'm so happy! :lol:
Wouter
Cool 8) Was just compiling a reply Nice to read you've solved your issue
Well, thanks for your effort!
:lol:
Wouter
Hi, i recently just bought a Bluetooth GPS receiver and installed tomtom on my M1000.
Only problem is, the devices appear to be connecting, and the GPS receiver is picking up satellites, but when i load Tomtom is keeps saying that the GPS is disabled.
What am i doing wrong?
Cheers, Tom.
Hi all!
I just bought an iPaq BT GPS system (seems like a rebrand of what GLobalSat offers). I have successfully paired the device, but when I do a services check, the blue angel cries that it cannot find any usable services. Is there something I can install on my BA to be able to use this GPS device? IT seems like they are trying to talk to one another, but just don't understand each other.
Thanks!
I fixed it...how? I dont know...weird but it works
I paired, I used tom tom, it got a GPS fix, I used it twice
LOL OK - back with some problems
First: the GPS unit will NOT get a GPS fix...
Then I could not connect to the device, so I deleted the pairing, and decided to re-pair them.
Then I saw the GPS BT device, but the services were not usable!
Now I try to paid the devices, and I cannot even see the GPS unit
arghhhhhh :evil:
I'm using the latest rom on my XDA2 (WMK5_2.01a32WWE) and TT Navigator 5.21 but I just can't get my Polstar PGM-111 wired receiver working at all, I've tried all sorts of input/output port settings even disabling GPS in control panel and yet I can't get connected. Don't really want to go back to 2003 as it works no probs but I just can't get this resolved in WM5, please any help would be wonderful before I lose any more hair!!