I have just got an XDAIIi and have tried both of my bluetooth headsets with it.
The Jabra 250 works but is inconsistent with it's pickup of the call. It sometimes takes 2 presses of the button to answer.
This could create the problem of dropping the call with the 2nd press if you've got the call but think you haven't.
The Motorola HS801 however works fine every time.
Point of interest... it appears to suffer from the yellow screen when viewed from an angle but it doesn't present a problem for me as I usually look at it head on.
The screen is certainly much brighter than the old XDAII I have.
It's a great machine marred only by the clunkey O2 active interface.
However I don't intend to mess with it yet and remove it.
Xda IIi Extended ROM
Bro anyway to extract the Extended ROM from your Xda IIi please?
TIA.
I have tried the unlock tools that worked on my XDA2s for unlocking and unhiding the extended rom, but they dont work on my XDA2s. i did not get ant errors, but it did not show up.
the screen on my XDA2i is good same as original XDA2, far better than the orange tint on the 2s screen
John
I'l try and extract ExtRom when I get some time ....
I have temporarily solved the active interface issue by removing it from the startup folder and speed increase is incredible...
I'l try and extract ExtRom when I get some time ....
I have temporarily solved the active interface issue by removing it from the startup folder and speed increase is incredible...
Bakerk
what did you remove from the startup menu to stop the o2 interface loading.
I have installed the v1.5 of o2 Plus (running with the small icon mode to make it quicker) but what do i remove to stop the main o2 screen from loading
all i have in that folder is
camera_detect
CheckAutoRun
Connections
IA_CID_Startup
o2 plus for XDA ( i nstalled this)
poutlook
RunBT
stk
thanks
John
applecom said:
Bakerk
what did you remove from the startup menu to stop the o2 interface loading.
I have installed the v1.5 of o2 Plus (running with the small icon mode to make it quicker) but what do i remove to stop the main o2 screen from loading
all i have in that folder is
camera_detect
CheckAutoRun
Connections
IA_CID_Startup
o2 plus for XDA ( i nstalled this)
poutlook
RunBT
stk
thanks
John
Click to expand...
Click to collapse
Remove "Connections" then soft reset.
JD
Related
Hi,
Running w2k3se 2.06 wwe for a day now. Looks quite stable. As this is intrim build (in between dcs and CHS version) there are bound to be bugs.
Most have noted camera failing the landscape. I think it would be better if we can list the bugs so that we can try to solve them.
I found many of the bugs cropped if we used older external rom files with w2kse .
Good that many of us are coming out with home cooked extended rom files. The big problem is to find which of these files are better and which are not.
Let me give you example MIDI56.sa.CAB give a better performance than MIDI561.sa.CAB. And rember the cleartype of 1.60 to 1.72 and so on.
The other problem with cooked extrom is that 70-80% file are same in many of them with very few new files. I am on dialup and it takes quite a bit of time to down load 6MB file just to get a customised cab. Also the server will have that much of load.
So my sugestion is we need a repository of file which are included in extrom. Why not seperate the cab files and just publish their customised config.txt in the post.
I think we need to create a thread of only those files. Suggestion are welcome.
RE
OK! Lets starrt the ball rolling.
Noted the followings for v2.06 ROM posted by mystery man:-
1) Sometimes the bluetooth icon on the Today screen would mysteriously disappear. Worst case is when the Today Settings don't even have the Bluetooth Profile although the blue light is blinking.
2) The camera menu got stuck in landscape mode after repeated switching from portrait-to-landscape and vice versa. Soft reset could not resolve the problem. However, after some time of use the problem automatically resolves itself.
:roll:
"The phone is not ready. Wait 15 seconds then try again"
This is when accessing the phone icon in the settings menu, or when trying to send an sms message.
Jez.
Re: RE
FOSA said:
OK! Lets starrt the ball rolling.
Noted the followings for v2.06 ROM posted by mystery man:-
1) Sometimes the bluetooth icon on the Today screen would mysteriously disappear. Worst case is when the Today Settings don't even have the Bluetooth Profile although the blue light is blinking.
2) The camera menu got stuck in landscape mode after repeated switching from portrait-to-landscape and vice versa. Soft reset could not resolve the problem. However, after some time of use the problem automatically resolves itself.
:roll:
Click to expand...
Click to collapse
same here the Today Screen BT will play games with em :twisted:
hi,
few more bugs on 2.06
1. After playing around with landscpae and portrait several times, phone would loose last two rows of buttons both in landscape as well as potrait mode. Soft reset corrected it.
2. MMS composer is not started if you choose from programs, but this can be bypassed by going to the outlook and start coposing.
If you notice startup folder of w2k3se several of the w2k3 startup programs are missing. Is that why SE is faster and I noticed my battery now lasts longer than W2K3 ;-)
Jez said:
"The phone is not ready. Wait 15 seconds then try again"
This is when accessing the phone icon in the settings menu, or when trying to send an sms message.
Jez.
Click to expand...
Click to collapse
This is something I've always seen if trying to access any of the phone's advanced functionality right after a reset, even with my old XDA.
This is akin to trying to access phone numbers on ye olde ubiquious nokia phone SIM card right after turning on.
Hi everyone,
I would like to kick start a thread for any application installed in the latest SE rom by mystery man. The rom seem stable nevertheless some apps seem do not really prepared for the changes. (i mean from WM2003 to WM2003SE). Let begins........
1) Battery Pack Pro v1.11-will make your today screen screwed up. How? Go Start-Settings-Today-Items-then click OK and closed it-you will get what i meant here.
Will continue to report.......
Best Rgds... :lol:
Wisbar advance freezes and requires soft reset after telephone has been used/or whilst attempting to dial.
XCPU Skalar - you have to update to version 3.85, lower version keeps system to hang
Tillanosoft Pockettweak - update to 4.2.7, lower version destroys font settings
PocketZenPhone - update to latest beta 11 version, older versions are not able to switch phone on again
Can someone tell me what is the function of "Today timeout" which constantly showed 4hrs at Start-Setings-Today?
Well why must that function included in the today settings? The problem is now and then my today screen showed nothing or clean even though i unchecked the Today timeout box to disable it.
After all i suspect something is not right wif the Today timeout option and nothing to do wif Battery Pack.
Anyone experience the above problem? :roll:
Calligrapher 7.4 (just only 7.4 ,older not has this problem)
after i install and use for 15 sec. ,then screen is locked up cannot tap anymore but Button still work.
I do soft reset and disable it then 15 sec ,screen lock again.
Only one way to solve it by using cradle sync with desktop and select remove calligrapher and then soft reset ,it will work normally again.
It may from defect in version 7.4 or conflict with XDA II.
PLease take care ,if you decide to use this version
Problems with SE (both dcs's & mysteryman)
Hey there guys!
I used this weekend (in fact starting friday evening) to upgrade my T-Mobile MDA2 from ROM 1.72 (radio 1.14) to ROM 2.xx and radio 1.18.
Although I did a lot of reflashing up to now - I want to thank you all guys for this forum, because everything I've learnt about my PPC is from here. It is shame that I cannot contribute via paypal because Bulgaria is not included in their country list.
Now.. Here is what I've experienced with my mda:
I upgraded from 1.72 T-Mobile WWE to 2.02ti... All cool - until I started to load the device with programs. I mean - it is cool and fast and nice and colorful..
A guy mentioned that SE boots faster - I can's say that - the phone would show the first boot picture, then fast will change to 2nd and then (in 2 to 5 seconds) the bluetooth led will flash (if at all) at least 5 times and then it shows the today screen or will stay there forever :-(
I understood that:
* xscallar 2.8x would not work - it freezes the system;
* sbp pocketplus 2.1 would hang the system or/and the today screen;
* sprite backup 3.0 hard-resets the system (3 in 2 times after finishing scheduled/normal backup);
* gprs monitor 2.12 would hang the today screen;
* cleartype is a way worse than in 1.60wwe
* if the system works, compared to 1.72 - it is flying! but :-(....
These problems appeared both in 2.02ti and in 2.06, no matter what extended rom I install (if I install any at all - because thru tears I tried that one too ;-) )
The (X) sign for closing programs disappears constantly and some programs could not be closed or [ok]'d :-(
Bluetooth 1.5x would either not work properly or would not work at all.
about the extended rom - i noticed this:
MMS15024_WWE_Hima_OzUp.sa.CAB, despite the lower version compared to MMS2.0.0.13 incorporates in the outlook folder and doesn't take additional space in the today screen. Also it provides sending restrictions as 100K, 200K, MAX - ;-) which is kewl 'cause I missed the ability of my SonyEricsson P900 to send unlimited in size MMS messages.
CallerIDB10, provided with 2.x SE versions cuts about 4 pixels from the bottom of the CLIP pictures and I don't like it - it has no new features or anything
For conclusion:
I liked the look of SE versions - it is really neat and fast - when it works.
But non of my really needed sofware would work as expected.
I went back to T-Mobile 1.72 (edsub's version) and I will tell you guys - there is nothing as stable and fast as it is.
This is my first post here, and I read this forum for more than 8 months. You guys rock!
Yours,
Dean
gerald8297 said:
Hi everyone,
1) Battery Pack Pro v1.11-will make your today screen screwed up. How? Go Start-Settings-Today-Items-then click OK and closed it-you will get what i meant here.
Best Rgds... :lol:
Click to expand...
Click to collapse
I had a big problem with 2.06-mystery man . Stuck on the every second
boot . So I had to do Hard Reset all the time.
After that I switched to 2.02 and all I can say its the most stable ROM
I know from 1.60 .
The reason I am posting here is :
NO PROBLEM WITH Battery Pack Pro v1.11 on the ROM 2.02.t1WWE .
sprint said:
I had a big problem with 2.06-mystery man . Stuck on the every second boot .
Click to expand...
Click to collapse
I've notices that 2.06 sometimes freeses during boot when SD-card is inserted. It boots normally when SD-card is out and inserted when device finishes booting.
Cleartype in 2.06 can be tuned to look fine with cleartype tuning tool from Microsoft. I can upload it if needed.
Probably
Probably , probably , probably
Spb PocletPlus 2.1 is stable in my 2.06SE. The problem i encountered is the unstable widcomm bluetooth stack ( 1.5.0.801 ) which always "could not correctly initialized - BTTrayCE.exe) . can some one post some registry tweak for this?
@ mamaich
can you post the MS cleartype tuning tool please? thanks! :lol:
Phone Profiles is another one....
Using Phone Profiles 7.5 or 8.0, there is a dialog on reboot, 'Can't Find Window", (something like that), and it will not continue booting, only solution is a hard reset...
I can confirm the Calligrapher 7.4... will lock during boot, hard reset
mamaich said:
Cleartype in 2.06 can be tuned to look fine with cleartype tuning tool from Microsoft. I can upload it if needed.
Click to expand...
Click to collapse
Pls do so. Many are anticipating.
Thanks for the good work!!!
:lol:
Here is Microsoft Cleartype Tuner.
mamaich said:
Here is Microsoft Cleartype Tuner.
Click to expand...
Click to collapse
Thank you!!! So is this file will refine the ugly font of WM2003SE lanscape Cleartype?
working good mamaich!
still my widcomm BT stack cannot restart once in awhile..any tweak on this?
Tnx.
sprint said:
I had a big problem with 2.06-mystery man . Stuck on the every second
boot . So I had to do Hard Reset all the time.
Click to expand...
Click to collapse
Mine is working fairly well... I did notice the same problem you have, but I got around it by holding in the reset button until it reset itself (normally 5 secs or so). It resets fine every time. This is a pain compared to 1.66.00WWE. I haven't tried 1.72 yet. I would like to persist with the 2.06 version to see what bugs it has.
Recrem...
UPDATE:- Installing XCPUScalar Version 2.85 has completely cleared up the reset hang problem. I have configured it to auto start on soft reset, and minnimise on start. I have now reset well over 10 times and it resets as it should. I have XCPUScalar set to a min speed of 400MHz though...
I have only one problem with wm2003se 2.06 - at every call speaker mode turns on automaticly
mamaich said:
Cleartype in 2.06 can be tuned to look fine with cleartype tuning tool from Microsoft. I can upload it if needed.
Click to expand...
Click to collapse
Thanks man ! the tuner is great but still the font is bad in 2.02t1 it was much better with 2.06 but i changed it because it get stuck on reset!
could you please post the clear type file from 2.06?
thanx in advance :wink:
gerald8297 said:
1) Battery Pack Pro v1.11-will make your today screen screwed up. How? Go Start-Settings-Today-Items-then click OK and closed it-you will get what i meant here.
Click to expand...
Click to collapse
Yeap i encountered this problem too. Any solution so far? Or shall i reflash my rom to dcs one 2.02? Would it solve this problem?
Anyone pls HELP......
My list of problematic programs in SE
1. Mamaich's "Contact Button", which I miss dearly.
2. Pocket Zen Phone.
3. BTtools freeze Today screen. (not needed for functional purposes, only used to turn BT off automatically)
4. Still have to use EzWAP for MMS
5. Camera switch screen back to Portrait.
Hey
I'm hoping someone out there will be able to help me solve this problem or I may be saying goodbye to my Trion sooner than I would like.
So here's the problem:
While I am sleeping my trion keeps LockingUp!
This has happened a few times and each has been quite costly, either I oversleep and am late for important appoitments or I miss a number of very important phone calls.
I have tried using differnt ROMS but the problem persists. It happened to me a couple times while using the new I-mate rom so I switched to the new Dopod ROM and it happened again! I'm going to try the TYTN rom now... ugh!
Info Regarding my current setup:
Dopod ROM: 1.23.707.4
Programs:
MSN Messenger
MSN PPC 2003
TCPMP
Cyberon
Aidem MP3
Fit4cat Hermes v1.0
Fit4cat Settings changed from default:
Enable wireless plugin + show pluggin = ON
Remove Wireless Manager Icon = ON
Mount Ext. ROM = ON
Improve A2DP "High" = ON
- and that's all I've enabled. A weird thing I notice with the wireless pluggin is that at times on the Today screen it will just show my bluetooth status and neglect to show the WIFI status; at times the BT icon is right aligned as if the WIFI was still there but invisible and at other times the BT icon is left aligned indicating the WIFI icon is not even there.
That's about it for now. Any help resolving the main FREEZING/CRASHING issue would be GREATLY appreciated.
Thank You!
I have had the same problem. Hard reset and ran software freefor a few days, and same problem. Flashed to imate, and same problem. Flashed back to original HTC, and problem gone. I don't know what it was/is, but I feel your pain. We have almost no software in common, so whatever it is I think the problem is within the ROM itself or common Ext_Rom files. I never ran without Ext_ROM may start there.
this problem I had for about 3 weeks, I am currently using the new dopod rom and I have had no problems at all. It is a software problem issue and as roms develop issues will go I would flash either the new HTC rom or dopod rom as I had no problem with either of them I installed the dopod as it is quicker for me.
the same to me with imate rom, and some time when i press the center/enter button it show the sound volume panel
must go to Tytn rom tonight
Here it is a Today Screen plugin that allows the display of the IMSI code (or a custom label for it) of the current active Sim. Works for all dual Sim solutions allowing to always know which is the SIM in use.
From my personal experience I prefer the use of simple power on-off solutions because they consume the same amount of energy of a normal SIM. The digital solutions provide a nice STK application but the resource consumption is not acceptable (especially for HTC Hermes). This plugin solve the main problem of the simple power on off Dual Sim holders: knowing which is the active Sim.
Configure your custom labels in the Today option dialog for the specific item (Dual SIM Today).
Update:
Added menu to switch with a single click between the sim (works only for power on off adapter)
Added the operator name associated to the SIM
Some bugs fixed
Update 1:
Added configuration parameter to:
Activate the display of operator name
Define the Sim switch mode: traditionally with a menu or directly with a tap & hold on the today screen (with the stylus or the scroll wheel)
Some bugs fixed
Update 2:
Added an option to disable the switch functionality
Added the capabilty to open the option dialog directly from the today screen
Update 3:
Direct access to the menu with the action button (or scroll wheel) without menu gesture
Fixed bug in the highlight of the plugin
Update 4:
Fixed bugs in the management of option dialog
Update 5:
Show the last switch time
Update 6:
Fixed operator name redraw
@forum users; help me in setting the priority of the enancements; currently they:
. support for Stk adapter
. support for dialin adapter
. check sim (periodically verify that the right sim is active)
. automatic switch based on specific rules
...
If the tool is useful for you feel free to donate something
.
Pelargonium
Left blank
Some screenshots
Some screenshots for the plugin:
This is sweet! Thanks. Now just need to find a dual sim adapter that is compatible with 3G.
Plugin is brilliant. Ideal for me would be to include it in plugin existing for the Today. I do not understand of programming but I have found this in wiki:
Show Network Operator Name in today screen
Restoring Today Item: WiFi, BT and Phone Connection Status:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Today\Items]Create "Wireless" use Key
"Flags"=dword:00000000
"Options"=dword:00000000
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
Enable clicking on the today plugin above to open Comm Manager
[HKEY_LOCAL_MACHINE\ControlPanel\WrlsMgr]Create String Value "Redirect"
"Redirect"= "\Windows\CommManager.exe"
Pardon by my English. I am Spanish. Thanks.
not happy
Hi guys
just thought I'd let you know
I've downloaded you sim today program and ran on my hermes but now cant get my phone to work!!
It hangs when trying to load the today screen - I've had to hard reset and start from scratch
As I said NOT HAPPY - beware you may get same probs
Jon
anubus12 said:
This is sweet! Thanks. Now just need to find a dual sim adapter that is compatible with 3G.
Click to expand...
Click to collapse
The one that I use works with 3G (HSDPA too) without problems.
Pelargonium said:
The one that I use works with 3G (HSDPA too) without problems.
Click to expand...
Click to collapse
Do you have a link to the dual-sim adapter you are using?
QtKiguis said:
Plugin is brilliant. Ideal for me would be to include it in plugin existing for the Today. I do not understand of programming but I have found this in wiki:
Show Network Operator Name in today screen
Restoring Today Item: WiFi, BT and Phone Connection Status:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Today\Items]Create "Wireless" use Key
"Flags"=dword:00000000
"Options"=dword:00000000
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
Enable clicking on the today plugin above to open Comm Manager
[HKEY_LOCAL_MACHINE\ControlPanel\WrlsMgr]Create String Value "Redirect"
"Redirect"= "\Windows\CommManager.exe"
Pardon by my English. I am Spanish. Thanks.
Click to expand...
Click to collapse
I really do not understand your question. Could you please explain it better? The plugin already shows his interface in the Today screen and can be configured in the standard way. Do you want the plugin show the operator name or some other information?
HyperZ said:
Do you have a link to the dual-sim adapter you are using?
Click to expand...
Click to collapse
Sent you via PM
JPW said:
Hi guys
just thought I'd let you know
I've downloaded you sim today program and ran on my hermes but now cant get my phone to work!!
It hangs when trying to load the today screen - I've had to hard reset and start from scratch
As I said NOT HAPPY - beware you may get same probs
Jon
Click to expand...
Click to collapse
JPW, I have your same configuration in term of base software (except for Hermes, mine is an Hermes 200) and it works. Did you tried the plugin immediatly after the reset?
In order to understand what happened can you write details of the problem? when does the hermes hang? during installation, configuration, etc? What other software do you have?
Thanks and sorry for the problem.
Is it specific to Hermes somehow, or should it work on any WM5 device?
Can it be used with multi-SIM SIM cards (like 16-in-one), or it is somehow intended only for (some?) dual-SIM adapters?
Lurker0 said:
Is it specific to Hermes somehow, or should it work on any WM5 device?
Can it be used with multi-SIM SIM cards (like 16-in-one), or it is somehow intended only for (some?) dual-SIM adapters?
Click to expand...
Click to collapse
It is not related to Hermes. It uses standard Windows Mobile APIs. I tested it on Hermes and WM6 (Black 2.0 and 2.5) but it should work on every devices with WM 2003 and up.
The basic plugin should also works for every multi sim card. The functionality to switch the active card is currently working only for power "on off" dual sim card (I'm developing a version that works also for digital dual sim holder).
Pelargonium
Hello, Pelargonium
I enclose a photo to you with which I consider that he would be ideal. To integrate the DualSIm Plugin in the Wireless Plugin, since space is saved.
I have a SIMORE GOLD that works perfectly with the TYTN, although the change I have it to do with menu of own dualsim. The one of plugin does not work to me. I hope to help but that to bother, and again, pardon by my english.
QtKiguis said:
Hello, Pelargonium
I enclose a photo to you with which I consider that he would be ideal. To integrate the DualSIm Plugin in the Wireless Plugin, since space is saved.
I have a SIMORE GOLD that works perfectly with the TYTN, although the change I have it to do with menu of own dualsim. The one of plugin does not work to me. I hope to help but that to bother, and again, pardon by my english.
Click to expand...
Click to collapse
I understand your requirement but the component that you mention (netui.dll) is not customizable. Sorry.
Regarding the sim switch functionality of my plugin, I'm developing a version that works also with digital adapter.
Pelargonium
Hi, I think you're product is great, just what I've been looking for BUT... I'm afraid to say it doesn't quite work. I have an early dual sim adaptor (cut) that requires the phone to be turned off/on to switch. I'm running it on a Orange M600 (prophet) with Jesterz 2.20 rom. Your switcher switches the phone off OK and then back on... BUT it doesn't register on the network.. just gives me a "!" next to the little signal icon. It displays the right number for the sim and all just doesn't fully re-establish the signal. I have also loaded a WM5 version of WIVIT sim switcher (from this group) but as it doesn't allow me to define my own number it's no good. However, when I have WIVIT loaded and on screen, YOUR product works fine.
I would rather just use your product. Any clues on how I might be able to fix this?
Thanks
Dave.
qdavhen said:
Hi, I think you're product is great, just what I've been looking for BUT... I'm afraid to say it doesn't quite work. I have an early dual sim adaptor (cut) that requires the phone to be turned off/on to switch. I'm running it on a Orange M600 (prophet) with Jesterz 2.20 rom. Your switcher switches the phone off OK and then back on... BUT it doesn't register on the network.. just gives me a "!" next to the little signal icon. It displays the right number for the sim and all just doesn't fully re-establish the signal. I have also loaded a WM5 version of WIVIT sim switcher (from this group) but as it doesn't allow me to define my own number it's no good. However, when I have WIVIT loaded and on screen, YOUR product works fine.
I would rather just use your product. Any clues on how I might be able to fix this?
Thanks
Dave.
Click to expand...
Click to collapse
@qdavhen, I tested the plugin only on Hermes with different WM6 Rom, because I don't have other devices. let me test it on the WM5 sdk emulator and I'll give you a feedback.
Thanks Pelargonium,
I've found that after running your program if I go into phone options and select "Find Network" then the phone starts again. I've been doing some digging around and *think* it might have something to do with needing to wait longer between switching off and then back on again... hope this helps.
qdavhen said:
Thanks Pelargonium,
I've found that after running your program if I go into phone options and select "Find Network" then the phone starts again. I've been doing some digging around and *think* it might have something to do with needing to wait longer between switching off and then back on again... hope this helps.
Click to expand...
Click to collapse
Fixed and updated the first post. I've also added the name of the current operator. Please try it and give me a feedback.
Thanks
Pelargonium.
Pelargonium,
Works a treat! Thanks! A couple of small changes that would make this perfect... you have added the operator (eg. O2-UK - 123456789) I would suggest removing the minus sign AFTER the operator and just leave a space. Also rather than tapping and holding and then selecting "switch sim" is it possible to have it switch sim automatically when tapping and holding? These are just small things. Otherwise it is fantastic! Dave.
hey,
I got a problem and hope that someone can help me...
without the story:
I need either the old screen shots of the startmenu (manila) and the internet menu tab of the Energy rom which was released on 11th august 09
(the downloaded folder says: EnergyROM_RAPHAEL_20090811_Standard) or enough money to buy a new device (poor student) or a "automatic starting" app (on the storage card) which ends the modem modus...
with the short story:
With the help of murphy I broke my raphael (a water bottle crashed down from the luggage rack above me, directly with the closing on the display), only the screen is broken, the touch is working. so I was able to "use" my phone with jeyo mobile companion (screen image feature) and touching the black display.
I tried to use the raph as a umts modem, but now I'm stuck in the "internet sharing status". I think I have to go into internet sharing, and then click "disconnect" (bottom left?). But as long as the phone is in this status it is not syncable and though not working with jeyo mobile companion...
with the screen shots it is my last chance to deactivate the internet sharing thing (which is not working btw), and then to try other ways (scripts, wifirouter thing/prog). softrest and booting without a sim did not help. A hardreset (or a new rom) is first because of my sms and second because of
the adjustment not a good idea. Or is it possible to sync the device directly after the hardreset/new rom, without this touchscreen adjustment thing?
it would be absolute fantastic if some replies would help...
and please excuse my english...
best regards,
garans